How to specify a cipher suit used between plugin and weblogic server?

I install Weblogic8.1 SP3 which supports for strong cipher suits, and config an apache 2.50 server as an front end.
I config appache to use 2 way SSL with browser and wls one way SSL with apache plugin. Then config apache to forward client certs to WLS. now the problem is, I can see that the SSL connection between browser and apache uses a strong cipher suit('SSL_RSA_WITH_RC4_128_MD5'), but the ssl connection bwtween apache plugin and WLS uses a weak cipher suit('SSL_RSA_EXPORT_WITH_RC4_40_MD5'), with the SnoopServlet, although I use the mod_wl128_20.so module. How can I increase the cipher strength of SSL between WLS and it's apache plugin?
Thanks in advance.
Best
Regards
Jean

Hello Gunaseelan,
This is not possible because WLS 6.1 needs a config.xml file, exactly this
name, to start.
What you can do is to define a recovery domain, called myrecovery_domain for
instance, and put the config_recovery.xml, renamed "config.xml".
Hope this helps,
Ludovic.
Developer Relations Engineer
BEA Support.
"Gunaseelan Venkateswaran" <[email protected]> a écrit dans le message
news: 3cd6a324$[email protected]..
>
Hi,
I have 2 weblogic startup scripts (startWebLogic.sh and
startWebLogic_recovery.sh) for the same domain.
startWebLogic.sh uses config.xml file.
I would like to use config_recovery.xml as the configuration file forstartWebLogic_recovery.sh
>
>
How would I do this ?
I am using WebLogic Server 6.1 on SunOS 5.8 / HP-UX 11.0.
Appreciate any help.
Regards
Gunaseelan Venkateswaran

Similar Messages

How to add a Cipher Suite using RSA 1024 algorithm to the 'SSL Cipher Suite Order' GPO

Following a VA test the Default Domain GPO has been set to enable the SSL Cipher Suite Order. Following the change Symantec Endpoint Protection Manager doesn't work properly as the the Home, Monitors and Reports pages are blank and an Schannel error is
logged in the SEPM server's event log.
I have spoken to Symantec and I have been told that we need to allow the RSA 1024 bit algorithm but they can't tell me which cipher suite this would be. I have looked in the GPO setting and can't see an RSA 1024 suite but have found some in this article:
http://tools.ietf.org/html/draft-ietf-tls-56-bit-ciphersuites-01
I want to know how to add an additional cipher suite into the setting safely. Am I able to just add the suite into the GPO setting (eg TLS_RSA_EXPORT1024_WITH_DES_CBC_SHA) or do I need to do anything else beforehand?
If anyone has any advice regarding this or cipher suite orders and troubleshooting SSL problems it would be much appreciated,
Thanks
Chris

Hi Chris,
Based on my research, RSA_EXPORT1024_DES_CBC_SHA is a previous cipher suite, which is supported, you can enable it use
SSL Cipher Suite Order policy setting under Administrative Templates\Network\SSL Configuration Settings.
More information for you:
TLS/SSL Cryptographic Enhancements
http://technet.microsoft.com/en-us/library/cc766285(v=WS.10).aspx
Best Regards,
Amy

How to deploy the EJB which used Japanese word on Weblogic server

Hi All,
I am running a test on WIN 2K pro Japanese system. When I deploy an ejb bean with
using Japanese character in the Java src code and also in ejb-jar.xml file, some
exceptions were thrown.
I am thinking that the weblogic cann’t pass ejb-jar.xml which is encoding as UTF-8
but with Japanese character. Could you please let me know how to configure the
Weblogic to solve the problem or to encode the ejb-jar.xml differently?
Any suggestion will be welcome.
Thanks,
OUTPUT>>OUTPUT>>Invalid byte 3 of 3-byte UTF-8 sequence.
OUTPUT>>OUTPUT>>java.io.UTFDataFormatException: Invalid byte 3 of 3-byte UTF-8
s
equence.
OUTPUT>>OUTPUT>> at weblogic.apache.xerces.impl.io.UTF8Reader.invalidByte
(UTF8Reader.java:693)
OUTPUT>>OUTPUT>> at weblogic.apache.xerces.impl.io.UTF8Reader.read(UTF8Re
ader.java:445)
===
weblogic.management.ApplicationException:
Exception:weblogic.management.ApplicationException: prepare failed for ejb
Module: ejb Error: Exception preparing module: EJBModule(ejb,status=NEW)
EJB ejb.jar ‚ð ejb.jar ‚©‚çƒfƒvƒƒC‚Å‚«‚Ü‚¹‚ñB
EJB ‚Ð‚ë‚± ‚Å‚ÍA‚·‚×‚Ä‚Ì cmp/cmr ƒtƒB[ƒ‹ƒh‚ª¬•¶Žš‚ÅŠJŽn‚³‚ê‚é•K—v‚ª‚ ‚è‚Ü‚·BƒtƒB[ƒ‹ƒh
'‚È‚Ü‚¦‚P' ‚Í‚±‚ê‚É“K‡‚µ‚Ü‚¹‚ñB
at weblogic.ejb20.compliance.EJBComplianceChecker.check(EJBComplianceChecker.java:268)
at weblogic.ejb20.compliance.EJBComplianceChecker.checkDeploymentInfo(EJBComplianceChecker.java:232)
at weblogic.ejb20.ejbc.EJBCompiler.complianceCheckJar(EJBCompiler.java:810)
at weblogic.ejb20.ejbc.EJBCompiler.checkCompliance(EJBCompiler.java:766)
at weblogic.ejb20.ejbc.EJBCompiler.doCompile(EJBCompiler.java:200)
at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:476)
at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:407)
at weblogic.ejb20.deployer.EJBDeployer.runEJBC(EJBDeployer.java:493)
at weblogic.ejb20.deployer.EJBDeployer.compileJar(EJBDeployer.java:763)
at weblogic.ejb20.deployer.EJBDeployer.compileIfNecessary(EJBDeployer.java:701)
at weblogic.ejb20.deployer.EJBDeployer.prepare(EJBDeployer.java:1277)
at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:477)
at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.java:2962)
at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.java:1534)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1188)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1031)
at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2602)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2552)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2474)
at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:798)
at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:507)
at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:465)
at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
Making application available for use ... done.
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
weblogic.ejb20.compliance.ComplianceException: EJB ‚Ð‚ë‚± ‚Å‚ÍA‚·‚×‚Ä‚Ì cmp/cmr
ƒtƒB[ƒ‹ƒh‚ª¬•¶Žš‚ÅŠJŽn‚³‚ê‚é•K—v‚ª‚ ‚è‚Ü‚·BƒtƒB[ƒ‹ƒh '‚È‚Ü‚¦‚P' ‚Í‚±‚ê‚É“K‡‚µ‚Ü‚¹‚ñB
        at weblogic.ejb20.compliance.EJB20EntityBeanClassChecker.checkCMPFields(EJB20EntityBeanClassChecker.java:178)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:324)
        at weblogic.ejb20.compliance.EJBComplianceChecker.check(EJBComplianceChecker.java:278)
        at weblogic.ejb20.compliance.EJBComplianceChecker.checkDeploymentInfo(EJBComplianceChecker.java:232)
        at weblogic.ejb20.ejbc.EJBCompiler.complianceCheckJar(EJBCompiler.java:810)
        at weblogic.ejb20.ejbc.EJBCompiler.checkCompliance(EJBCompiler.java:766)
        at weblogic.ejb20.ejbc.EJBCompiler.doCompile(EJBCompiler.java:200)
        at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:476)
        at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:407)
        at weblogic.ejb20.deployer.EJBDeployer.runEJBC(EJBDeployer.java:493)
        at weblogic.ejb20.deployer.EJBDeployer.compileJar(EJBDeployer.java:763)
        at weblogic.ejb20.deployer.EJBDeployer.compileIfNecessary(EJBDeployer.java:701)
        at weblogic.ejb20.deployer.EJBDeployer.prepare(EJBDeployer.java:1277)
        at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:477)
        at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.java:2962)
        at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.java:1534)
        at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1188)
        at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1031)
        at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2602)
        at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2552)
        at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2474)
        at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:798)
        at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:507)
        at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:465)
        at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
        at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
        at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
        at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2556)
        at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2474)
        at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:798)
        at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:507)
        at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:465)
        at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
        at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
        at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
--------------- nested within: ------------------
weblogic.management.ManagementException: - with nested exception:
[weblogic.management.ApplicationException:
Exception:weblogic.management.ApplicationException: prepare failed for ejb
        Module: ejb     Error: Exception preparing module: EJBModule(ejb,status=NEW)
EJB ejb.jar ‚ð ejb.jar ‚©‚çƒfƒvƒƒC‚Å‚«‚Ü‚¹‚ñB
EJB ‚Ð‚ë‚± ‚Å‚ÍA‚·‚×‚Ä‚Ì cmp/cmr ƒtƒB[ƒ‹ƒh‚ª¬•¶Žš‚ÅŠJŽn‚³‚ê‚é•K—v‚ª‚ ‚è‚Ü‚·BƒtƒB[ƒ‹ƒh
'‚È‚Ü‚¦‚P' ‚Í‚±‚ê‚É“K‡‚µ‚Ü‚¹‚ñB
        at weblogic.ejb20.compliance.EJBComplianceChecker.check(EJBComplianceChecker.java:268)
        at weblogic.ejb20.compliance.EJBComplianceChecker.checkDeploymentInfo(EJBComplianceChecker.java:232)
        at weblogic.ejb20.ejbc.EJBCompiler.complianceCheckJar(EJBCompiler.java:810)
        at weblogic.ejb20.ejbc.EJBCompiler.checkCompliance(EJBCompiler.java:766)
        at weblogic.ejb20.ejbc.EJBCompiler.doCompile(EJBCompiler.java:200)
        at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:476)
        at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:407)
        at weblogic.ejb20.deployer.EJBDeployer.runEJBC(EJBDeployer.java:493)
        at weblogic.ejb20.deployer.EJBDeployer.compileJar(EJBDeployer.java:763)
        at weblogic.ejb20.deployer.EJBDeployer.compileIfNecessary(EJBDeployer.java:701)
        at weblogic.ejb20.deployer.EJBDeployer.prepare(EJBDeployer.java:1277)
        at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:477)
        at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.java:2962)
        at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.java:1534)
        at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1188)
        at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1031)
        at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2602)
        at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2552)
        at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2474)
        at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:798)
        at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:507)
        at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:465)
        at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
        at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
        at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
weblogic.ejb20.compliance.ComplianceException: EJB ‚Ð‚ë‚± ‚Å‚ÍA‚·‚×‚Ä‚Ì cmp/cmr
ƒtƒB[ƒ‹ƒh‚ª¬•¶Žš‚ÅŠJŽn‚³‚ê‚é•K—v‚ª‚ ‚è‚Ü‚·BƒtƒB[ƒ‹ƒh '‚È‚Ü‚¦‚P' ‚Í‚±‚ê‚É“K‡‚µ‚Ü‚¹‚ñB
        at weblogic.ejb20.compliance.EJB20EntityBeanClassChecker.checkCMPFields(EJB20EntityBeanClassChecker.java:178)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:324)
        at weblogic.ejb20.compliance.EJBComplianceChecker.check(EJBComplianceChecker.java:278)
        at weblogic.ejb20.compliance.EJBComplianceChecker.checkDeploymentInfo(EJBComplianceChecker.java:232)
        at weblogic.ejb20.ejbc.EJBCompiler.complianceCheckJar(EJBCompiler.java:810)
        at weblogic.ejb20.ejbc.EJBCompiler.checkCompliance(EJBCompiler.java:766)
        at weblogic.ejb20.ejbc.EJBCompiler.doCompile(EJBCompiler.java:200)
        at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:476)
        at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:407)
        at weblogic.ejb20.deployer.EJBDeployer.runEJBC(EJBDeployer.java:493)
        at weblogic.ejb20.deployer.EJBDeployer.compileJar(EJBDeployer.java:763)
        at weblogic.ejb20.deployer.EJBDeployer.compileIfNecessary(EJBDeployer.java:701)
        at weblogic.ejb20.deployer.EJBDeployer.prepare(EJBDeployer.java:1277)
        at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:477)
        at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.java:2962)
        at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.java:1534)
        at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1188)
        at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1031)
        at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2602)
        at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2552)
        at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2474)
        at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:798)
        at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:507)
        at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:465)
        at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
        at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
        at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2491)
at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:798)
at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:507)
at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:465)
at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
>

Open your server console (eg: http://localhost:7001/console)
Go to deployment modules
select ejb modules
Click deploy new ejb module
a browse will come, browse and find the applicaiton folder where u have kept your ejb
Select that and click deploy..
Error msg or successful message will come in the console window.
regards
SHanu

URGENT-Session Synchronization between WebSEAL and WebLogic Server 6.1

Hi All,
I am a new-bee to Access Manager and WebSEAL.
I have an application running in WebLogic Server6.1.
I have WebSEAL junctioned to iPlanet Web Server, which in turn
integrates with WebLogic through NSAPI plug-in. I am using iPlanet
Directory Server as Access Manager user registry.
As per my application requirement there should be single sign on, that
is if the user gets authenticated with WebSEAL, he need not have to
login to the application and would be able to access any page. But if
he logs off the application and if he tries to access any page then he
need to again get authenticated with the WebSEAL. Here I am having a
problem.
I am not able to make the WebSEAL to through HTTP authentication
challenge again if the user logs off the application. The only way to
make webSEAL to through HTTP authentication challenge in the browser
is to close and open the browser.
I initially tried with BASIC authentication, it does not work.
Then I tried with FORM authentication. In this case webSEAL sets a
cookie called PD-H-SESSION-ID. When the user clicks the "Logoff" link
in the application, I tried to set this cookie's max age to zero, it
does not work. The max age is always set to -1 value. I even tried to
overwrite the cookie value with blank space using HttpServletResponse
setHeader method, which also didnot work.
Can anybody tell me how to make the webSEAL to through the
authentication challenge when the user logs off the application and
what kind of authentication method (BASIC or FORM) to use?
This is very urgent. Pls help?
Thanks in advance.
Regards
Sundar.

Hi All,
I am a new-bee to Access Manager and WebSEAL.
I have an application running in WebLogic Server6.1.
I have WebSEAL junctioned to iPlanet Web Server, which in turn
integrates with WebLogic through NSAPI plug-in. I am using iPlanet
Directory Server as Access Manager user registry.
As per my application requirement there should be single sign on, that
is if the user gets authenticated with WebSEAL, he need not have to
login to the application and would be able to access any page. But if
he logs off the application and if he tries to access any page then he
need to again get authenticated with the WebSEAL. Here I am having a
problem.
I am not able to make the WebSEAL to through HTTP authentication
challenge again if the user logs off the application. The only way to
make webSEAL to through HTTP authentication challenge in the browser
is to close and open the browser.
I initially tried with BASIC authentication, it does not work.
Then I tried with FORM authentication. In this case webSEAL sets a
cookie called PD-H-SESSION-ID. When the user clicks the "Logoff" link
in the application, I tried to set this cookie's max age to zero, it
does not work. The max age is always set to -1 value. I even tried to
overwrite the cookie value with blank space using HttpServletResponse
setHeader method, which also didnot work.
Can anybody tell me how to make the webSEAL to through the
authentication challenge when the user logs off the application and
what kind of authentication method (BASIC or FORM) to use?
This is very urgent. Pls help?
Thanks in advance.
Regards
Sundar.

How to specify a mapping file using annotations?

Hi,
i am trying to deploy a WebService (with annotations) on oc4j 10.1.3.1.0. but all i get is the following exception:
07/03/13 12:41:52 oracle.j2ee.ws.common.tools.api.ValidationException: test.datamodel.SimpleObjectId - Duplicate type name "test.datamodel.SimpleObjectId" for Java type "{http://tdeer.de/services/internal/test/1_0}SimpleObjectId" found. To remove this error do not specify a single typeNamespace for all value types or specify a mapping file. This error could also be caused when an erroneous type has been used more than once.
07/03/13 12:41:52      at oracle.j2ee.ws.common.processor.modeler.rmi.RmiModeler.buildModel(RmiModeler.java:247)
07/03/13 12:41:52      at oracle.j2ee.ws.common.processor.config.ModelInfo.buildModel(ModelInfo.java:173)
07/03/13 12:41:52      at oracle.j2ee.ws.common.processor.Processor.runModeler(Processor.java:72)
07/03/13 12:41:52      at oracle.j2ee.ws.common.metadata.annotation.DeploymentGenerator$DeploymentCompileTool.run(DeploymentGenerator.java:200)
07/03/13 12:41:52      at oracle.j2ee.ws.common.metadata.annotation.DeploymentGenerator.generateDeploymentArtifacts(DeploymentGenerator.java:131)
07/03/13 12:41:52      at oracle.j2ee.ws.common.metadata.annotation.EJBWebServiceAnnotationParser.parseAnnotatedBean(EJBWebServiceAnnotationParser.java:165)
07/03/13 12:41:52      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
07/03/13 12:41:52      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
07/03/13 12:41:52      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
07/03/13 12:41:52      at java.lang.reflect.Method.invoke(Method.java:585)
07/03/13 12:41:52      at oracle.j2ee.ws.server.deployment.oc4j.WebServiceAnnotationListener.parseAnnotatedClass(WebServiceAnnotationListener.java:85)
07/03/13 12:41:52      at com.evermind.server.ejb.AnnotationParser.notifyAnnotationListeners(AnnotationParser.java:201)
07/03/13 12:41:52      at com.evermind.server.ejb.AnnotationParser.parseAnnotations(AnnotationParser.java:73)
07/03/13 12:41:52      at com.evermind.server.ejb.EJBPackageDeployment.parseMetaData(EJBPackageDeployment.java:939)
07/03/13 12:41:52      at com.evermind.server.ejb.EJBContainer.postInit(EJBContainer.java:832)
07/03/13 12:41:52      at com.evermind.server.ApplicationStateRunning.initializeApplication(ApplicationStateRunning.java:217)
07/03/13 12:41:52      at com.evermind.server.Application.setConfig(Application.java:413)
07/03/13 12:41:52      at com.evermind.server.Application.setConfig(Application.java:314)
07/03/13 12:41:52      at com.evermind.server.ApplicationServer.addApplication(ApplicationServer.java:1853)
07/03/13 12:41:52      at oracle.oc4j.admin.internal.ApplicationDeployer.addApplication(ApplicationDeployer.java:512)
07/03/13 12:41:52      at oracle.oc4j.admin.internal.ApplicationDeployer.doDeploy(ApplicationDeployer.java:196)
07/03/13 12:41:52      at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:93)
07/03/13 12:41:52      at oracle.oc4j.admin.jmx.server.mbeans.deploy.OC4JDeployerRunnable.doRun(OC4JDeployerRunnable.java:52)
07/03/13 12:41:52      at oracle.oc4j.admin.jmx.server.mbeans.deploy.DeployerRunnable.run(DeployerRunnable.java:81)
07/03/13 12:41:52      at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
07/03/13 12:41:52      at java.lang.Thread.run(Thread.java:595)
07/03/13 12:41:52 Caused by: oracle.j2ee.ws.common.processor.modeler.rmi.InvalidParameterException: test.datamodel.SimpleObjectId - Duplicate type name "test.datamodel.SimpleObjectId" for Java type "{http://tdeer.de/services/internal/test/1_0}SimpleObjectId" found. To remove this error do not specify a single typeNamespace for all value types or specify a mapping file. This error could also be caused when an erroneous type has been used more than once.
07/03/13 12:41:52      at oracle.j2ee.ws.common.processor.modeler.rmi.LiteralTypeModeler.addTypeName(LiteralTypeModeler.java:1249)
07/03/13 12:41:52      at oracle.j2ee.ws.common.processor.modeler.rmi.LiteralTypeModeler.processClass(LiteralTypeModeler.java:290)
07/03/13 12:41:52      at oracle.j2ee.ws.common.processor.modeler.rmi.LiteralTypeModeler.modelTypeLiteral(LiteralTypeModeler.java:235)
07/03/13 12:41:52      at oracle.j2ee.ws.common.processor.modeler.rmi.LiteralTypeModeler.modelTypeLiteral(LiteralTypeModeler.java:181)
07/03/13 12:41:52      at oracle.j2ee.ws.common.processor.modeler.rmi.LiteralTypeModeler.modelSubclasses(LiteralTypeModeler.java:1048)
07/03/13 12:41:52      at oracle.j2ee.ws.common.processor.modeler.rmi.RmiModeler.buildModel(RmiModeler.java:210)
07/03/13 12:41:52      ... 25 more
The Stateless-SessionBean has one WebMethod with the following Signature:
public Element getElement(TestObjectId1 pObjectId1, TestObjectId2 pObjectId2) throws RemoteException
TestObjectId1 and TestObjectId2 have the same Superclass, SimpleObjectId.
How to specify a mapping file using annotations?
Thanks
tdeer

We you codegen a Policy annotated WSDL, the policies are get included in the stub. Hence you don't have to specify a separate Policy file.
But if you need to use a separate policy then you need to set them in the AxisDescription object that you use in the ServiceClient and OperationClient.
e.g.
ServiceClient serviceClient = new ServiceClient();
OperationClient operationClient = serviceClient
.createClient(ServiceClient.ANON_OUT_IN_OP);
FileInputStream fis = new FileInputStream("path-to-policy.xml");
Policy servicePolicy = PolicyEngine.getPolicy(fis);
AxisService axisService = serviceClient.getAxisService();
axisService.getPolicyInclude().setPolicy(servicePolicy);
If you need more information please repost this to [email protected] with a [AXIS2] subject prefix.

How to specify which cert to use for software virt server?

Is there a way to specify which certificate to use for each software virtual server? So, for example a user hitting https://somewhere.com would get the certificate for somewhere.com while the virtual server https://somewhereelse.com would use the certifcate with the name somewhereelse.com in it?

No, this is not possible due to limitations of the underlying protocols.
HTTP requests are sent over TCP connections which deal with IP addresses and port numbers (i.e. hardware virtual server properties), not hostnames (i.e. software virtual server properties). The HTTP protocol adds software virtual server support by allowing a client to identify the hostname (e.g. "www.iplanet.com") of the server it wishes to communicate with. This is achieved by including a "Host:" header with each HTTP request.
Unfortunately, the SSL/TLS protocols require that the web server present its SSL/TLS certificate BEFORE the client sends its HTTP request. Since the software virtual server information is contained in the HTTP request, it is not possible for the server to select different certificates for different software virtual servers.
You will need to use hardware virtual servers (i.e. virtual servers that have different IP addresses and/or port numbers) if you wish to use distinct SSL/TLS certificates.

How do I sync a PDF file between iPhone and iPad in iBooks?

How do I sync a PDF file between iPhone and iPad in iBooks?

If the PDF supports it then you can try opening the PDF in iBooks on your phone and use the 'share' icon (the square with the upward pointing arrow) to email it to yourself (some PDFs a protected and don't support emailing) and use 'open in' in the Mail app on your iPad to copy it to its Mail app.
Or you can connect the phone to your computer's iTunes and do File > Devices > Transfer Purchases to copy it over to your iTunes (that should copy PDFs and/or epubs that are in the iBooks app, not just ibooks) and if using a Mac with Mavericks or Yosemite on it then do File > Move Books From iTunes in its iBooks app, and you can then sync it to your iPad.

How to create database link between oracle and SQL Server

Hello Everyone,
Here i have Oracle Database 9i and SQL Server 2005 databases.
I have some tables in sql server db and i want to access from Oracle.
How to create a database link between these two servers
Thanks,

Thanks for Everyone,
I was struggle with this almost 10 days....
I created Database link from Oracle to SQL Server
Now it is fine.........
Here i am giving my servers configuration and proceedure how i created the db link...@
Using Generic Connectivity (HSODBC) we can create db link between Oracle and SQL server.
Machine (1)
DB Version : Oracle 9.2.0.7.0
Operating System : HP-UX Itanuim 64 11.23
IP : 192.168.0.31
Host : abcdbt
Machine (2)
Version : SQL Server 2005
Operating System : Windows server 2003 x86
IP : 192.168.0.175
Host : SQLDEV1
User/PW : sa/abc@123! (Connect to database)
Database : SQLTEST (exsisting)
Table : T (“ T “ is the table existing in SQLTEST database with 10 rows)
Prerequisites in Machine (2):
a)     Oracle 10g software
b)     User account to access SQL Server database (sa/abc@123!)
c)     Existing SQL Server Database (SQLTEST)
d) Tables (testing purpose) (T)
Steps:
1)     Install Oracle 10.2.0.1 (Only SW,No need of database) *(Machine 2)*
2)     Create a DSN where your windows Oracle 10g SW resides *(Machine 2)*
Control panel >> Administrative Tools >> Data Source (ODBC) >> System DSN ADD
You can follow this link also.....
http://www.databasejournal.com/features/oracle/article.php/3442661/Making-a-Connection-from-Oracle-to-SQL-Server.htm
I created DSN as
DSN name : SQLTEST
User : SA/abc@123! (Existing user account)
Host : 192.168.0.175 (machine 2)
Already I have 1 database in SQL Server with the name SQLTEST
You can create DSN with different name also (not same as db name also)
3)     Create a hsodbc init file in $ORACLE_HOME\hs\admin *(Machine 2)*
Create init<DSN NAME> file
Ex: initSQLTEST
Copy inithsodbc to initSQLTEST
And edit
initSQLTEST file
HS_FDS_CONNECT_INFO = SQLTEST    <DSN NAME>*
HS_FDS_TRACE_LEVEL = OFF*
save the file....@
4)     Configure Listener.ora *(Machine 2)*
LISTENER_NEW =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.175)(PORT = 1525))
SID_LIST_LISTENER_NEW =
(SID_LIST =
(SID_DESC =
(SID_NAME = SQLTEST) *+< Here SQLTEST is DSN NAME >+*
(ORACLE_HOME = G:\oracle 10g\oracle\product\10.2.0\db_1)
(PROGRAM = hsodbc))
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = G:\oracle 10g\oracle\product\10.2.0\db_1)
(PROGRAM = extproc) )
:> lsnrctl start LISTENER_NEW
5)     Configure tnsname.ora *(Machine 2)*
SQLTEST11 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.175)(PORT = 1525))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = SQLTEST))
(HS=OK)
:> tnsping SQLTEST11
If No errors then conti….
6)     Configure a file *(Machine 1)*
Cd $TNS_ADMIN ($ORACLE_HOME/network/admin)
Create a file
$ vi TEST_abcdbt_ifile.ora
something=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST =192.168.0.175) (PORT=1525))
(CONNECT_DATA=
(SID=SQLTEST))
(HS=OK)
$ tnsping something
$ sqlplus system/manager
Your connected to Oracle database *(machine 1)*
create database link xyz connect to “sa” identified by “abc@123!” using ‘SOMETHING’;
select * from t@xyz;10 rows selected.
Thanks,
Edited by: ram5424 on Feb 10, 2010 7:24 PM

How generate a random number that is between 0 and 15! (0-15)

how generate a random number that is between 0 and 15 ??? (0-15)
pls tell me, thx!!!!!!!!!!!!!!!!!

import java.util.Random;
Random r = new Random();
int mynumber = r.nextInt()%16;
For (2^1)-1 number use:
-> int mynumber = r.nextInt()&15; // speedup

HT4914 How to synchronize my own produced Video between iPad and iPhone

How to synchronize my own produced Video between iPad and iPhone

First, both your devices shoulde be using the same Apple ID account.
Second make sure that the "Documents and Data" option under iCloud settings are set ON for both devices.
That should make it work.

How to decide which adapter to use from IDOC and RFC?

Hi All,
When interating XI with an SAP system,
How to decide which adapter to use from IDOC and RFC?
Thanks.

Hi,
you can also consider to use ABAP Proxy if you are working with Systems based on SAP Web AS 6.40.
Here some useful links:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/content.htm">ABAP Proxy Runtime</a>
ABAP Proxies in XI(Client Proxy)
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
ABAP Server Proxies
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
How do you activate ABAP Proxies?
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
XI: Reliable Messaging EOIO in ABAP Proxies
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
More links for proxy:
proxies and performance...
Hope this help
Francesco

HT5029 How do I link my subscribed calendars between icloud and my ios devises on a windows pc?

How can I link my subscribed calendars between icloud and my ios devises on my windows 7 pc?

I am having a problem that I cannot find addressed. My old computer TOTALLY died - it won't even turn on to deauthorize, back-up, and all those other steps given to transfer my music. All the info I have found, says you can authorize up to 5 devices etc, but so far, nothing is working. I just want to transfer my library, and don't have hours to spend on this. I have searched and searched, and really sincerely need help, and please - only helpful comment - yeah, obviously I am missing something some where. If anyone can offer some kind advice, I would REALLY be grateful!
compaq Windows XP

How can i build application using Jdeveloper 10g for Weblogic server 10.3

Hi,
We have a requirement where in we want to build an SOA application using Jdeveloper 10g for Weblogic Server 10.3.
Is there any way to make a connection to Weblogic Server 10.3 from JDeveloper 10g? If there is any way please share it with me.
Thanks,
Amit Kumar

Amit,
SOA Suite is not yet certified for WLS 10.3. You have to wait for the certification of it.
At the moment you can't install the SOA Suite on WLS 10.3 nor connect from JDev 10.1.3 to it.
--olaf

How to get STPOV structure values using BOM number and Plant number

hello All,
could you please help me out
'How to get STPOV structure values using BOM number and Plant number'
is there any function module where can i give input as bom and plant number .
waiting for your response.
regards
srinivas

I did a quick where-used lookup in SE11 on the structure STPOV in function module interfaces and came up with the following:
Function Module                             Short Description
CK_F_TOTALCOST_COMPUTE
CS_ALT_SELECT_COUPLED_PRODUCT
CS_WHERE_USED_CLA                Bills of material; class use
CS_WHERE_USED_CLA_ANY        Bills of material; direct class use or via other class
CS_WHERE_USED_CLA_VIA_CLA        Bills of material; class use via classes
CS_WHERE_USED_COP
CS_WHERE_USED_DOC                Bills of material; document use
CS_WHERE_USED_DOC_ANY:Bills of material; direct and (indirectly) document use via
CS_WHERE_USED_DOC_VIA_CLA        Bills of material; document use via classes
CS_WHERE_USED_KNO                Bills of material; use object dependency
CS_WHERE_USED_MAT                Bills of material; where-used list
CS_WHERE_USED_MAT_ANY:Bills of material; where-used list as article or class item
CS_WHERE_USED_MAT_VIA_CLA        Bills of material; where-used list via classes
EXIT_SAPMC29M_001                BOM; Article Where-Used List
It appears that this structure is primarily used for where-used look-ups for components within the BOM. I don't know if any of these are what you're in need of.
Hope this helps,
Mark Schwendinger

Differences between Weblogic Server and Weblogic Server Suite?

Hi
What is the differences between Weblogic Server and Weblogic Server Suite, beside licens costs?
Regards
/Martin

WebLogic server standard edition, you get the WebLogic with no clustering.
Clustering is available in the WebLogic Enterprise Edition.
The WebLogic Suite also gives you Coherence and JRockit real-time
A desciption of the various products can be found here: http://www.oracle.com/us/products/middleware/application-server/index.html

How to specify a cipher suit used between plugin and weblogic server?

Similar Messages

Maybe you are looking for