How to specify which cert to use for software virt server?
Is there a way to specify which certificate to use for each software virtual server? So, for example a user hitting https://somewhere.com would get the certificate for somewhere.com while the virtual server https://somewhereelse.com would use the certifcate with the name somewhereelse.com in it?
No, this is not possible due to limitations of the underlying protocols.
HTTP requests are sent over TCP connections which deal with IP addresses and port numbers (i.e. hardware virtual server properties), not hostnames (i.e. software virtual server properties). The HTTP protocol adds software virtual server support by allowing a client to identify the hostname (e.g. "www.iplanet.com") of the server it wishes to communicate with. This is achieved by including a "Host:" header with each HTTP request.
Unfortunately, the SSL/TLS protocols require that the web server present its SSL/TLS certificate BEFORE the client sends its HTTP request. Since the software virtual server information is contained in the HTTP request, it is not possible for the server to select different certificates for different software virtual servers.
You will need to use hardware virtual servers (i.e. virtual servers that have different IP addresses and/or port numbers) if you wish to use distinct SSL/TLS certificates.
Similar Messages
-
Applet freezes requesting which cert should use for a SSL connection
Hello everyone,
I have a strange problem. Applet freezes when it request which certificate should it use to connect to the server through a SSL connection. It works fine if it does not show the "choose certificate" window.
I can not give more clues, but I am quite desperated and I hope you can help.Hello everyone,
I have a strange problem. Applet freezes when it request which certificate should it use to connect to the server through a SSL connection. It works fine if it does not show the "choose certificate" window.
I can not give more clues, but I am quite desperated and I hope you can help. -
How to control which AppServer is used for a process?
Hello experts!
We have the problem that we have 3 Servers from which are 2 running at 99% and one has nearly no processes running.
Is it possible to control on which ApplicationServer a process is starting?
I know, there is a possibility for process chains if you go in the menu to process chain->attributes->backround server
But we have learned that this is only true for the starting process. The following processes can run on different servers.
Does anyone know what to do?
Thanks in advance!
PeterA few thought:
maybe you can check table RSADMINA (settings for ODS data activation) and define the server group if necessary.
Also you could check the control parameter for data extraction (V_IDOCPRMS) and make the settings. -
How to specify which of 2 wifi cards to use
Hi All,
I recently installed Arch Linux on a USB (not live, a persistant installation). I have 2 wifi cards: one that came with the laptop and is used via PCIe, which is an Intel Centrino Wireless-N 2200. It's awful. The other, which is a USB wifi card and which I want to use, is an ASUS USB-N10. I checked linux-wless.passys.nl to see if the N10 was supported, and it said it was, and also said: "Supported by the rtl8192su and r8712u staging drivers in the mainline Linux kernel. Firmware from userspace is required." I can't get wifi working properly in Arch Linux, which makes it impossible to progress because I can't install anything and am stuck in just using terminal. I don't know how to specify which card to use in Arch. Any help would be much appreciated.
Thank you for your answers in advance!After running ip addr, it doesn't display names for the different devices in a way that I can tell which ones they are. The names that it gave me are: "lo", "enp3s0", "wlp4s0", and "wlp0s20u2". I know that 2 of those are virtual ports for wireless devices that aren't being used, but I don't know how to differentiate.
EDIT: Also, when I try to navigate to etc/netctl/examples/wireless-wpa, it says "Correcting wireless-wpa to ."
EDIT 2: "lo" seems to be a generic interface, and I've narrowed down the names so now I know that my two wireless cards are 'wlp4s0" and "wlp0s20u2". When I ran iwconfig, I got
wlp4s0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=15dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key: off
Power Management: off
wlp0s20u2 unassociated Nickname:"rtl_wifi"
Mode:Auto Access Point: Not-Associated Sensitivity: 0/0
Retry:of RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
lo no wireless exentions
enp3s0 no wireless extensions
I'm assuming that this means that the latter two interfaces are the unused virtual interfaces. Does this tell you anything important?
Last edited by TheAtomicGoose (2014-04-07 21:05:28) -
How to Specify Which Version of Rsync on Server Side
I have installed rsync 3.0.6 on both client and server side and know how to specify which version to use on the client side but am I right in assuming that if I don't specify some how on the server side it will use the version stored in /usr/bin/rsync? Do I have to move the version stored in /usr/local/bin/rsync to /usr/bin?
Thanks.--rsync-path=PROGRAM specify the rsync to run on remote machine
-
in my ipad email address which I am using for sending mail is appearing differently in the receipents mail box ! how to resolve that
while sending a email in my ipad it is showing the correct email address([email protected]) in the ""from"" field but in receipients inbox ""from"" field it is showing another email id ([email protected])
-
How to disable iMessage for an old Apple ID which is only used for AppStore?
How to disable iMessage for an old Apple ID which is only used for AppStore?
I used my old Apple ID for iMessage and AppStore Apps. Now I'm using my iCloud Account (second Apple ID) on my Mac as iCloud and iMessage Account.
New Apple ID - iCloud & iMessage (**** thing that I can't use my okd Apple ID for iMessage and another for iCloud) on new Mac
Old Apple ID - AppStore, iMessage days ago
So now how to disable the iMessage function for my old Apple ID which isn't used anymore?
Thank you!Yeah the problem is that I want to be reachable by:
*new apple id
*mobile number
Earlier:
*old apple id
*mobile number
Problem - if I set in Settings => Messages => Receive at:
*new apple id
*mobile number
Others still can see my old apple id as "iMessage" although it isn't used a iMessage anymore. So how to disbale iMessage function for that? -
How to specify which version of a function to use
I tried to do what it said, but that resulted in error
PowershellPS C:\WINDOWS\system32> Import-dscResource -ModuleName @{ModuleName="xPSDesiredStateConfiguration";ModuleVersion="3.4.0.0"}Import-dscResource : The term 'Import-dscResource' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.At line:1 char:1+ Import-dscResource -ModuleName @{ModuleName="xPSDesiredStateConfigura ...+ ~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (Import-dscResource:String) [], CommandNotFoundException + FullyQualifiedErrorId : CommandNotFoundException
(Btw: The Edge Web browser doesn't show the formatting toolbar in these text editors... I switched to IE to write this)I have this script and the problem is, there's two versions of xPSDesiredStateConfiguration in the wildTextconfiguration HTTPPullServer{ # Modules must exist on target pull server Import-DSCResource -ModuleName xPSDesiredStateConfiguration Node dc { WindowsFeature DSCServiceFeature { Ensure = "Present" Name = "DSC-Service" } WindowsFeature IISConsole { Ensure = "Present" Name = "Web-Mgmt-Console" } xDscWebService PSDSCPullServer { Ensure = "Present" EndpointName = "PSDSCPullServer" Port = 8080 PhysicalPath = "$env:SystemDrive\inetpub\wwwroot\PSDSCPullServer" CertificateThumbPrint = "AllowUnencryptedTraffic" ModulePath = "$env:PROGRAMFILES\WindowsPowerShell\DscService\Modules" ConfigurationPath = "$env:PROGRAMFILES\...
(Btw: The Edge Web browser doesn't show the formatting toolbar in these text editors... I switched to IE to write this)I have this script and the problem is, there's two versions of xPSDesiredStateConfiguration in the wildTextconfiguration HTTPPullServer{ # Modules must exist on target pull server Import-DSCResource -ModuleName xPSDesiredStateConfiguration Node dc { WindowsFeature DSCServiceFeature { Ensure = "Present" Name = "DSC-Service" } WindowsFeature IISConsole { Ensure = "Present" Name = "Web-Mgmt-Console" } xDscWebService PSDSCPullServer { Ensure = "Present" EndpointName = "PSDSCPullServer" Port = 8080 PhysicalPath = "$env:SystemDrive\inetpub\wwwroot\PSDSCPullServer" CertificateThumbPrint = "AllowUnencryptedTraffic" ModulePath = "$env:PROGRAMFILES\WindowsPowerShell\DscService\Modules" ConfigurationPath = "$env:PROGRAMFILES\...
Which method is used for event creation
Dear All,
My client has more then one Purchase Organization. Workflow for Purchase order release very from pur org to pur org. For example - workflow WS92000030 is trigger when PO is created for India pur org where as workflow WS92000021 is trigger when PO is created for US pur org.
I checked and found that same Object Type - BUS2012 & event - RELEASESTEPCREATED is used in all Pur. Org PO release workflow. Also I found in Transaction code - SWETYP that Type linkage activate for BUS2012, RELEASESTEPCREATED in all the PO workflow - WS92000030 & WS92000021.
As per my knowledge, event can be created in various way such as Function module, Change document, General status management, Business Transaction Events etc.
Can some one guide me, how can I found that which method is used for event creation in different pur org?
How can I fould what is the fuctional module used for event creation if Fuctional module used for event creation.
For your information, I can see in T. Code - SWUO that 'Result dependent on a check function module' for all the workflow - WS92000030, WS92000021 etc.
Thanks in
Hi Sahu,
I dont think they have used the Function module or change document or any other kind of methods to trigger the workflow. This is because RELEASESTEPCREATED method is a standard method and it will be triggered by standard SAP. They can not make changes in standard sap saying RELEASESTEPCREATED should be triggered for this Purchase Org .
Istead what i think is, they might have given the Event Condition for each workflow.
In SWDD>> basic settings>> Start Events, we can give condition on triggering the workflow.
Please check this.
Regards,
Gautham
How to specify a mapping file using annotations?
Hi,
i am trying to deploy a WebService (with annotations) on oc4j 10.1.3.1.0. but all i get is the following exception:
07/03/13 12:41:52 oracle.j2ee.ws.common.tools.api.ValidationException: test.datamodel.SimpleObjectId - Duplicate type name "test.datamodel.SimpleObjectId" for Java type "{http://tdeer.de/services/internal/test/1_0}SimpleObjectId" found. To remove this error do not specify a single typeNamespace for all value types or specify a mapping file. This error could also be caused when an erroneous type has been used more than once.
07/03/13 12:41:52 at oracle.j2ee.ws.common.processor.modeler.rmi.RmiModeler.buildModel(RmiModeler.java:247)
07/03/13 12:41:52 at oracle.j2ee.ws.common.processor.config.ModelInfo.buildModel(ModelInfo.java:173)
07/03/13 12:41:52 at oracle.j2ee.ws.common.processor.Processor.runModeler(Processor.java:72)
07/03/13 12:41:52 at oracle.j2ee.ws.common.metadata.annotation.DeploymentGenerator$DeploymentCompileTool.run(DeploymentGenerator.java:200)
07/03/13 12:41:52 at oracle.j2ee.ws.common.metadata.annotation.DeploymentGenerator.generateDeploymentArtifacts(DeploymentGenerator.java:131)
07/03/13 12:41:52 at oracle.j2ee.ws.common.metadata.annotation.EJBWebServiceAnnotationParser.parseAnnotatedBean(EJBWebServiceAnnotationParser.java:165)
07/03/13 12:41:52 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
07/03/13 12:41:52 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
07/03/13 12:41:52 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
07/03/13 12:41:52 at java.lang.reflect.Method.invoke(Method.java:585)
07/03/13 12:41:52 at oracle.j2ee.ws.server.deployment.oc4j.WebServiceAnnotationListener.parseAnnotatedClass(WebServiceAnnotationListener.java:85)
07/03/13 12:41:52 at com.evermind.server.ejb.AnnotationParser.notifyAnnotationListeners(AnnotationParser.java:201)
07/03/13 12:41:52 at com.evermind.server.ejb.AnnotationParser.parseAnnotations(AnnotationParser.java:73)
07/03/13 12:41:52 at com.evermind.server.ejb.EJBPackageDeployment.parseMetaData(EJBPackageDeployment.java:939)
07/03/13 12:41:52 at com.evermind.server.ejb.EJBContainer.postInit(EJBContainer.java:832)
07/03/13 12:41:52 at com.evermind.server.ApplicationStateRunning.initializeApplication(ApplicationStateRunning.java:217)
07/03/13 12:41:52 at com.evermind.server.Application.setConfig(Application.java:413)
07/03/13 12:41:52 at com.evermind.server.Application.setConfig(Application.java:314)
07/03/13 12:41:52 at com.evermind.server.ApplicationServer.addApplication(ApplicationServer.java:1853)
07/03/13 12:41:52 at oracle.oc4j.admin.internal.ApplicationDeployer.addApplication(ApplicationDeployer.java:512)
07/03/13 12:41:52 at oracle.oc4j.admin.internal.ApplicationDeployer.doDeploy(ApplicationDeployer.java:196)
07/03/13 12:41:52 at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:93)
07/03/13 12:41:52 at oracle.oc4j.admin.jmx.server.mbeans.deploy.OC4JDeployerRunnable.doRun(OC4JDeployerRunnable.java:52)
07/03/13 12:41:52 at oracle.oc4j.admin.jmx.server.mbeans.deploy.DeployerRunnable.run(DeployerRunnable.java:81)
07/03/13 12:41:52 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
07/03/13 12:41:52 at java.lang.Thread.run(Thread.java:595)
07/03/13 12:41:52 Caused by: oracle.j2ee.ws.common.processor.modeler.rmi.InvalidParameterException: test.datamodel.SimpleObjectId - Duplicate type name "test.datamodel.SimpleObjectId" for Java type "{http://tdeer.de/services/internal/test/1_0}SimpleObjectId" found. To remove this error do not specify a single typeNamespace for all value types or specify a mapping file. This error could also be caused when an erroneous type has been used more than once.
07/03/13 12:41:52 at oracle.j2ee.ws.common.processor.modeler.rmi.LiteralTypeModeler.addTypeName(LiteralTypeModeler.java:1249)
07/03/13 12:41:52 at oracle.j2ee.ws.common.processor.modeler.rmi.LiteralTypeModeler.processClass(LiteralTypeModeler.java:290)
07/03/13 12:41:52 at oracle.j2ee.ws.common.processor.modeler.rmi.LiteralTypeModeler.modelTypeLiteral(LiteralTypeModeler.java:235)
07/03/13 12:41:52 at oracle.j2ee.ws.common.processor.modeler.rmi.LiteralTypeModeler.modelTypeLiteral(LiteralTypeModeler.java:181)
07/03/13 12:41:52 at oracle.j2ee.ws.common.processor.modeler.rmi.LiteralTypeModeler.modelSubclasses(LiteralTypeModeler.java:1048)
07/03/13 12:41:52 at oracle.j2ee.ws.common.processor.modeler.rmi.RmiModeler.buildModel(RmiModeler.java:210)
07/03/13 12:41:52 ... 25 more
The Stateless-SessionBean has one WebMethod with the following Signature:
public Element getElement(TestObjectId1 pObjectId1, TestObjectId2 pObjectId2) throws RemoteException
TestObjectId1 and TestObjectId2 have the same Superclass, SimpleObjectId.
How to specify a mapping file using annotations?
Thanks
tdeer
We you codegen a Policy annotated WSDL, the policies are get included in the stub. Hence you don't have to specify a separate Policy file.
But if you need to use a separate policy then you need to set them in the AxisDescription object that you use in the ServiceClient and OperationClient.
e.g.
ServiceClient serviceClient = new ServiceClient();
OperationClient operationClient = serviceClient
.createClient(ServiceClient.ANON_OUT_IN_OP);
FileInputStream fis = new FileInputStream("path-to-policy.xml");
Policy servicePolicy = PolicyEngine.getPolicy(fis);
AxisService axisService = serviceClient.getAxisService();
axisService.getPolicyInclude().setPolicy(servicePolicy);
If you need more information please repost this to [email protected] with a [AXIS2] subject prefix.
I'm using two displays and several desktops on my Mac (OS X 10.9.4).
When I need to restart Firefox, it remembers to open windows from last session in correct display, but does not remember which desktop was used for each window. So when the application starts, it opens all windows on a desktop which is currently active instead of reopening them on desktops used during the last session. How to fix the issue?
Hi Nerva,
Thank you for your question, there is a add on I have been recommended to custom set up of opening windows in new monitors. It's called [https://addons.mozilla.org/en-US/firefox/addon/monitor-master/ Monitor Master].
However, in regards to the session remembering which monitor the window was open in, in the profile folder there is a file that stores window positions and dimensions. It is called localstore.rdf.
Please stay tuned for more investigation, as there are definitely bugs on file for similar issues. Pinpointing it is the hard part.
I am trying to enter the No. Of my VISA card (which I normaly use for payments) in the billing info of my account and it is not accepted. Does anyone have any idea why?
JarleEkanger wrote:
How about this? Use Delete array subset to extract chunks for averaging, and a shift register to retain the remaining array.
It is typically not advisable to use "delete from array" in a tight loop. The constant memory reallocations due to array resizing are probably inefficient.
Here's one simple way to do it..
(If the number of points is not divisible by 10, the excess tail is discarded. You can easily modify that behavior if desired.)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
averages of 10.png 5 KB
averages of 10.vi 9 KB
Which clients are using my Sun One server for authentication?
We use Sun One ver. 5.2 .
Our LDAP clients use it for authentication.
How can I list which clients recently used the Sun One server to authenticate?
The reason I need that is because I want to upgrade the Sun One server and I want to notify the clients that I'm about to do it.
Thanks.
https://www.redhat.com/archives/fedora-directory-users/2005-September/msg00010.html
Useful script to extract LDAP based user posixGroup memberships information
===
Assuming you are using posixGroup objectclass and memberUid attribute to
store your membership information, you may find my shell script useful
and handy.
It works on Solaris LDAP Client with "ldapaddent" and "ldaplist"
commands, and works against FDS, SUN DS or OpenLDAP.
===
Gary
How to decide which adapter to use from IDOC and RFC?
Hi All,
When interating XI with an SAP system,
How to decide which adapter to use from IDOC and RFC?
Thanks.
Hi,
you can also consider to use ABAP Proxy if you are working with Systems based on SAP Web AS 6.40.
Here some useful links:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/content.htm">ABAP Proxy Runtime</a>
ABAP Proxies in XI(Client Proxy)
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
ABAP Server Proxies
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
How do you activate ABAP Proxies?
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
XI: Reliable Messaging EOIO in ABAP Proxies
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
More links for proxy:
proxies and performance...
Hope this help
Francesco
Which frame is used for movie preview?
Which frame is used for a home movie preview, takin with an iPhone 4s? I guess the question is, is there a way to specify the frame of the movie which is used for the preview?
-Thanks
I would have a look at
Gallery
Demo or at the site of a friend of mine
http://www.schutte.name
Maybe you are looking for
-
Moving tables with data from one client to another
Hello friends I have 2 clients 001 and 002. I have created a table with lots of data on client 001. I have to get the same table on 002 also with the same data. Is there an easier way of transfering this data from one table to another? I would apprec
-
Not Able to import LCMBIAR Files in BOBJ
Short Text Not Able to import LCMBIAR Files in BOBJ Long Text Not Able to import .biar and .sql Files in BOBJ BOBJ Details :- Build Date: 2013/04/08:15:08:44 Build Number: 1036 Product Version: 14.0.6 Data Source: BusinessObjects CMS 140 Dat
-
what is an "build.xml" archive? haw can I use it? thanks Ariel
-
How compatible is Sun ONE Message Queue with IBM Websphere MQ and at what version levels?
-
RAID BIOS controlling Sytem HDD, not AHCI
Hey All, I have an XW8400 Bios 2.38, adn I enabled the RIAD+AHCI sata emulation (and I did the regedit trick too) . AHCI bios loads but it says the my System drive ( SATA DRIVE) is being controlled by the RAID BIOS and not AHCI I do have a RAID 0 w