How to specify HTTPS endpoint for web role?

We're using CloudService of Azure, and within there are two web roles (A and B), we hope both use HTTPS protocol.
For web role A, we specify the endpoint like this:
<Endpoints>
<InputEndpoint name="WebPortalEndPoint" protocol="https" port="443" certificate="WebPortalCertificate" />
</Endpoints>
For web role B, we do like:
<Endpoints>
<InputEndpoint name="WebApiEndPoint" protocol="https" port="444" certificate="WebApiCertificate" />
</Endpoints>
So after deploying to cloud, we can use this url to visit web role A: https://name.cloudapp.net, but for web role B, we couldn't visit like: https://name.cloudapp.net:444.
Do we miss something? What ports can we use if we want to add more web role to cloud service which use HTTPS?

Hi,
How did your set the endpoints on your azure projects? I set my test project like this:
WebRole1 Endpoints:
WebRole2 EndPoints:
I can use the 443 to access the webrole1, and use 8081 to access webrole2. If your setting didn't work, I suggest you could reset and re-deployed again.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Is it possible to specify print settings for web pages?

Is it possible to specify print settings for web pages designed in Muse? For example, can you exclude background images from printing?

Hello,
You can define Print Setting to page By Defining CSS Style in page Header by typing Style tag.
you can go to Page > Page Properties > Metadata > HTML for <Head>.
you can refer to the link below for more details about Print properties in CSS.
http://www.smashingmagazine.com/2011/11/24/how-to-set-up-a-print-style-sheet/
Regards
Vivek

How to specify Host Server for Replicated Virtual Desktops within RDVH Collection

My question about how to specify Host Server for Replicated Virtual Desktops within Collection.
I know there is a aswered thread on this, but that solution (wait a week) didn't work for me.
So i have 2 servers, RDS01 and RDS02 with both 15 Hyper-V VM's and replicating to eachother. That part works fine.
Now I wanted to make it easy for my users I build a Connection Broker: RDCB
All went fine in that setup, but when I want to add the existing VM's from RDS01 and RDS02 to the collection it just radomly adds running ones and replicated ones.
So both RDS01 and RDS02 have 15 VM's running and 15 replica's in stopped state, but when I look in my collection, it says RDS01 has 23 and RDS02 has 7 VM's. When I add them all, I see he wants to add a lot of stopped states replica's from RDS01 instead of
the running ones from RDS02.
How can I specify which one he should use? Or need I disable replication first, setup the whole RDCB collection thing, and then turn replication back on? Or does Hyper-V replication not work at all when used in a collection?
I hope someone can help out here. I'm googling and trying for 1,5 week now, but i can;t get it right.
Thanks in advance.

Hi Robin,
Thanks for your patience.
After you removed Replication from 1 machine on both RDS01 and RDS02, please restart that machine. After that, please add this machine to the RD collection again to test how the issue goes.
As we know, Hyper-V Replica provides asynchronous replication of Hyper-V virtual machines between two hosting servers. It is simple to configure and does not require either shared storage or any particular storage hardware. Any server workload that can be
virtualized in Hyper-V can be replicated. Replication works over any ordinary IP-based network, and the replicated data can be encrypted during transmission. Hyper-V Replica works with standalone servers, failover clusters, or a mixture of both. The servers
can be physically co-located or widely separated geographically. The physical servers do not need to be in the same domain, or even joined to any domain at all.
Currently, would you please add only running state VMs to the RD CB collection? And would you please capture some screenshots of the error message? Thanks very much for your cooperation.
Best regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to capture memory usage for web application

In OATS openscripts, how to capture memory usage for web application? Does it have the exisitng java method that we can call to get the memory data (e.g. peak bytes, private bytes) consumed by web application?

JProbe

How to use chart engine for web dynpro java(EP) for Graphics generation.

Hi Frndz..
now lookiing out for different types of dynamic graphics generations according to my requirment, n i saw the followiing blog
Testing BusinessGraphics in Web Dynpro for Java
Itz very nice to see that we can generate planty of types, but here our server is EP 7.0(not CE 7.1) and i gone thru these links also
http://help.sap.com/saphelp_nwmobile71/helpdata/en/86/243f403f0a9354e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nwmobile71/helpdata/en/0b/79553b066d9414e10000000a114084/frameset.htm
https://help.sap.com/saphelp_nw04/helpdata/en/0c/95c83956852b51e10000000a114084/frameset.htm
here it seems to be Chart Engine n Chart Designer is mainly for BSP(R3), how best we can use this for web dyn pro java.
Thanks in Advance
Regards
Rajesh

hi
if you want to use BusinessGraphics in WebDynpro java you have to configure IGS.
IGS Configuration
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4846ac90-0201-0010-099d-d3b4e271849c
Business Graphics docs.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3261cd90-0201-0010-268c-d8d72e358af6
ChartDeigner Usage
http://help.sap.com/saphelp_nw04/helpdata/en/18/d4d43fb9490c65e10000000a114b1d/frameset.htm
Generating Gantt chart using web dynpro business graphics

How to call custom themes for Web Dynpro ABAP Application?

Hi,
I need to change the appearance of Web Dynpro ABAP application. So far I followed below steps,
1.     Created theme folder u2018testngou2019 (SE80->MIME Repositoty -> SAP->PUBLIC->BC->UR->nw5->themes -> u2018testngou2019 ).
2.     used program BSP_UPDATE_MIMEREPOS to dowmloaod content of u2018sap_tradeshowu2019 (SE80->MIME Repositoty -> SAP->PUBLIC->BC->UR->nw5->themes -> sap_tradeshowu2019) to desktop.
3.     Modified the themes using Eclipse Theme Editor.
4.     used program BSP_UPDATE_MIMEREPOS to upload modified themes to MIME repository u2018testngou2019 (SE80->MIME Repositoty -> SAP->PUBLIC->BC->UR->nw5->themes -> u2018testngou2019) .
My current URL is like http://server.name:XXXX/sap/bc/webdynpro/sap/hrrcf_a_startpage_int_cand?sap-client=XXX.
Now I want to know how custom themes called for Web Dynpro ABAP Application.
Is my approach correct?
...Naddy

Hi Naddy,
What you used is one way and even I failed when tried that method,
Instead go to SE38 - WD_THEMES - and you need to upload the zip file and you need to follow a folder structure.
it is case sensitive, atleast the zip file.
Make a zip file by name "Project.zip" -
Create a Folder Project and have the below folder structure,
1 data - all the properties files and also the designinfo file, below is the code
2 themes - (to get all the files download the theme from portal and you will have all the folders)
   2.1 ur
     2.1.1 name of the theme
       2.1.1.1 common
       2.1.1.2 csf
       2.1.1.3 r
       2.1.1.4 ur - all the css files (would be good if you can get the files from the server.)
       2.1.1.5   WSRP
3 war - empty folder
*.designinfo
isVisible=true
version=7.0.14.1.0
isDefault=false
isSapDesign=false
designName=**** name of the theme
Once done create a zip file and click on Start Import and give the path and will ask for transport request, it will take a while to upload once done as mentioned in the use the parameter sap-ep-themeroot="path"
This will resolve the issue.
Cheers-
Pramod
reward points if helpful

How do I batch "Export For Web" from Quicktime, one at a time

I have 20 quicktime movies in folder A.
I would like to "Export for Web" for all 3 options (iPhone, iPhone (cellular), and Desktop) to folder B.
How do I create an automator script to complete this action one at a time, until they are finished converting?
Also, I do not want to delete the originals.
I have never used Automator, but I'm guessing it should be easy to execute a shut down command when it is done...
Thanks a lot!

iTunes does not handle the import of photos/videos from the iPhone's Camera Roll.
If this is not the computer you sync your iPhone with, you should have been provided a warning message that your iPhone is associated with an iTunes library on another computer and when trying to transfer any iTunes content from a different computer, a warning message is provided indicating that all iTunes content on the iPhone will be erased first.
When connecting an iPhone to iTunes on another computer, none of the options under the various tabs for the iPhone sync preferences with iTunes are selected automatically. This means you had to select Sync Contacts under the Info tab for your iPhone sync preferences with iTunes on your wife's computer.
Assuming you are syncing contacts with a supported address book app on your computer, connect your iPhone to Tunes on your computer and without syncing, under the Info tab for your iPhone sync preferences below the Advanced section, select Contacts for replace info on this iPhone followed by a sync.
For importing photos/videos from the Camera Roll which can be done with a computer that is not used for syncing the iPhone since syncing with iTunes is not involved.
http://support.apple.com/kb/HT4083

How to setup HTTP client for HTTP to File scenario

Hey guys
i have a scenario wherein one of our clients is sending invoices(as XML message) over HTTP(client is outside our landscape) and i have to to send this invoice to a File system from where it will be picked up by an ABAP code(picking of the file has to be done by ABAper so i m not concerned with that)
the way i m starting off this project is that
i will create a sender and receiver data type,message type and Message interface,Message mapping is 1-1 so its kinda simple and then Interface mapping.
in configuration i wont be creating and sender communication channel and sender Agreement,i need receiver communication channel,receiver determination and interface determination.
does my design and configuration looks good to you guys?
also i waz goin through some threads and it says that i need to setup HTTP client for this scenario and then specify a URL in a specific format.
where will i setup the HTTP client and where will i specify the URL?
thanx
ahmad

Ahmad,
>does my design and configuration looks good to you guys?
Is correct.
>where will i setup the HTTP client and where will i specify the URL?
Take a look at this thread and check the HTTP Client code.
Copy the code and save it as a HTML file and you have the HTTP Cliet ready. GIve the details of your server, sender service, interface etc and trigger the call to XI.
In a real time scenario, you will need to use the URL used in the HTTP Client code from your WebApplication to trigger the call to XI.
/message/266750#266750 [original link is broken]
Regards
Bhavesh

How to specify page encoding for XML reports.

Hi,
Environment: Apps:11.5.10, Oracle Reports: 10g
I'm trying to generate XML tags by using a "rdf" report (10g).
Initially I generated the XML tags before moving the report to server. In the output file I got
<?xml version="1.0" encoding="WINDOWS-1252"?>
Then I moved the report to server and made the concurrent program output to XML.
In the concurrent program output the tag is
<?xml version="1.0" encoding="&Encoding"?>
The output shows error
===============
XML Parsing Error: XML declaration not well-formed
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
<?xml version="1.0" encoding="&Encoding"?>
Its clear that there is something wrong with page encoding format which has to get assigned while run time. But its not happening so.
How to specify the page encoding format?
Any help would be appreciated.
Thank you
BKR.
Edited by: BalaKrishna Reddy Avuthu on Aug 14, 2009 2:00 PM

Remove the encoding so it says:
<?xml version="1.0"?>
Also, you will get a similar error if your xml tags for fields contain any special characters like & or #.

How to specify PACKAGE SIZE for to RFC_READ_TABLE from PyRFC?

I'm trying to use PyRFC to extract large tables via RFC_READ_TABLE (due to an uncooperative/unsupportive basis team).
I know that RFC_READ_TABLE supports calling it with PACKAGE SIZE since ERPConnect does it by default.
In Python for Basis (Part 1), I learned how to specify an Open SQL where clause using the OPTIONS:
result = connector.call('RFC_READ_TABLE',
                       QUERY_TABLE=tablename,
                       DELIMITER=delimiter,
                       OPTIONS = [{'TEXT':where_clause}])
Is there a way, and how to specify PACKAGE SIZE in this case?
Thanks

Hi,
the package size works, but you need to call the function module multiple times in a loop. Here's an excerpt of the attached script:
recordcounter = 1          #needs to be >0 to get the while loop going
iteration = 0              #the number of times the function module got called
while recordcounter > 0: #as long as the function module calll returns rows...
    tempresult = self.call('RFC_READ_TABLE',
                            ROWSKIPS=iteration*fetchsize, #defines the number of rows to skip
                            **parameters)
    iteration=iteration+1 #increase the iteration
    data = tempresult['DATA']    #assign the returned rows to a variable
    if len(data) > 0:      #have there been any rows?
        for row in data:      #Do something with them
    else:
        recordcounter=0    #set recordcounter to 0 to end the while loop.
The script is far away from being perfect. It doesn't deal with RAW fields and the data types it returns are all strings. It does what I needed it to do but it may not be sufficient for what you may be trying to achieve.
Best regards
Lars

How to have separate template for each role in OIM

Hi,
We have multiple roles on a multiple AS400 boxes. In OIM we need a separate template for each role that has to be popped up during provisioning. How do we achieve this in OIM?
Pls help me with the solution.
Edited by: user8963056 on May 23, 2010 7:47 PM
Edited by: user8963056 on May 24, 2010 9:47 AM

Thanks for the reply
for the second question; we need on the basis of role these forrms will have different informations.
the AS/400 guys wants the below steps to be done on OIM side
They want to make sure below plan works with OIM plan.
1.Per System, create templates per role.
2.Update the AS400 User Request form to include a section for each system. Add templates for each role to each system’s section.
3.Provide ITSA with a menu option to create profiles by selecting the template they wish to copy.
4.Create backend programs to automate additional 400 tasks required per role.
a.Create directory entry
b.Add to Privilege Manager
c.Add to Menu System
d.Add to third party software
e.Other as required.
If we automate the above on the 400, in OIM , we would need to create the same templates.

How To Create A Technical For Web AS ABAP ???

Hi experts,
How to Create a Technical System For Web AS ABAP in SLD, Using "SLDAPICUST" And RZ70 Transaction Codes.
Please Give me Complete Steps And Support to Create TS in SLD Successfully
If Ur Answers Are Help full Means Points will be Rewarded
Regards
Khanna

Hi Prateek,
I Did the Things Which is Presented By Michal in This Blog.
But When I Executed RZ70 With My Gateway Service as "sapgw01" And the Gateway Host As "Server Host Name".
I Got the Error When I Click on "start Data Collection" After Execution of the Program As Follows
"Used RFC destination :SLD_NUC"
"RFC call failed : Error opening an RFC connection"
"Batch job not scheduled"
All Other Are Success Like Data Collection ......
Please let me Know What to Do Now...
Regards
Khanna

How to specify multiple sequence for multiple fields in a primary key!

Hi,
i have a table which has about 15 fields, one of the field is primary key and i am able to specify the sequence for it using toplink and when the object is created through toplink the sequence get generated automatically, which is fine.
Now i have to add another sequence generated field to the table this field is not nullable and
i am looking for a way in toplink to specify the sequence for this field too, so that when we create objects through toplink the value for the field is automatically generated instead of us fetching the next value from sequence using a sql statement and then using the set method for the field.
is there a way i can specify a sequence for another field through toplink, while keeping the sequence settings for the primary field untouched.
thanks for your help!
-

TopLink only supports a single sequence field in its' mappings. There should be an API you can use to get another sequence number from an event, but I could not find an easy one (please log a bug for this on EclipseLink). The following code might work if you define the other sequence in TopLink, but you could also just execute the raw SQL as you are doing.
i.e. something like,
preInsert(DescriptorEvent event) {
MyObject object = (MyObject) event.getObject();
object.setOtherId(event.getSession().getDatasourcePlatform().getSequence("MY_OTHER_SEQ").getGeneratedValue(event.getSession().getAccessor(), event.getSession()));
-- James : http://www.eclipselink.org

How to maintain HTTP Destinations for Adaptive WebService in Netweaver 7.1

hi ,
i am working with adaptive webservices. i hv created HTTP Destinations for Webservices on server. In Netweaver 04s i used to write code as follows
wdContext.currentNodeTest.modelObject()._setHTTPDestinationName("DESTINATION_NAME");
just b4 executing modelObject.
But in Netweaver 7.1 , no method _setHTTPDestinationName available for wdContext.currentNodeTest.modelObject() . I want to change host for wsdl , as my production and development servers are different. How can i use HTTP Destinations in Netweaver 7.1?

Kavita,
Are you creating adaptive webservice model, if so then you just need to import webservice model once in your code and when you deploy your application you must define two logical destinations in visual admin.
DEFAULT_WS_METADATA_DEST
DEFAULT_WS_EXECUTION_DEST
How to define logical destinations, check out following link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b2bc0932-0d01-0010-6d8e-cff1b2f22bc7
if you are running application in your development or production server just define these destinations and your application will run smoothly.
Regards,
Jawed Ali

How to specify overflow clause for IOT

Hi,
I’m using OSDM v3.0.0.665
How do I specify ‘overflow’ clause for index organized table (IOT)?
I need to generate DDL something similar to this “ create table T1(…….) organization index..overflow".
In OSDM, when I open physical model and table properties ‘IOT properties’ tab, I can see dropbox for overflow segment but no values in drop box, it is blank.
I do have tablespace created in my physical model.
I’m able to generate DDL for IOT but does not have ‘overflow’ clause.
Thanks,
Vikas

David,
Thanks for your response.
After creating segment template, I’m able to generate overflow clause.
However I’m still not able to specify tablespace for both – IOT table and overflow segment.
If I specify tablespace for IOT (say T1) under ‘General’ tab and if I also specify overflow segment (with tablespace T2) under ‘IOT properties’ tab, I’d expect it to generate DDL with tablespace T1 for IOT and tablespace T2 for overflow.
However it generates DDL with overflow tablespace T1 and does not generate any tablespace clause for IOT. So, IOT is created in default tablespace for user.
I need DDL with tablespace clause for both – IOT as well as overflow segment.
Can you please help?
Also, how do I get rid of other storage clauses like PCTFREE, PCTUSED, MINEXTENTS, MAXEXTENTS etc..
Thanks,
Vikas

How to specify HTTPS endpoint for web role?

Similar Messages

Maybe you are looking for