How to specify query timeout

how to set query timeout in code so that if connection breaks then it can restart immediately
help me out

No such thing in Oracle.
You can time-out a user session but that will not stop a query running on the server. If you want to kill the query you must kill the session running on the server using UNIX/Linux kill, orakill, or alter system kill session and then log in again.
PS: In the future post version, platform, operating system, etc. when asking questions.

Similar Messages

How can I setup the query timeout for SQVI in basis?

Hi,
I want to setup query timeout for a particular user so that if his query (created in SQVI) takes more then say 10 minutes, it automatically times out and system resources are freed up.
How can I do this for a specific user? Also in case I cant do it for a specific user how can I do it for all users?
Thanks for reading

The memory is limited by the parameters
abap/heap_area_dia
abap/heap_area_nondia
abap/heap_area_total
which are system wide.
If a user requests more memory than those, the program will dump.
Markus

Powerpivot Report 2010 - OLE DB or ODBC error: Query timeout expired; HYT00

0
I have report already developed by someone in powerpivot 2010 and deployed to sharepoint in powerpivot gallery library. The data source for this report is SQL Server 2008 r2. I have set the refresh options in sharepoint to run after business hours during
week end. When I check the refresh history it shows this error message "OLE DB or ODBC error: Query timeout expired; HYT00. An error occurred while processing the 'xxx' table. The current operation was cancelled because another operation in the
transaction failed..
I have tried to run the "Also refresh as soon as possible " just to check but same error message is shown.
This is the detailed error message details:
03/02/2014 21:06:55 03/02/2014 22:08:15 01:01:20 Failed
OLE DB or ODBC error: Query timeout expired; HYT00. An error occurred while processing the 'xxx' table. The current operation was cancelled because another operation in the transaction failed
Could anyone guide me on this issue? Truly appreciate your help in advance.

Hi asritha,
I would suggest you take a look at the following articles regarding how to configure PowerPivot data refresh in SharePoint Server:
Configure and Use Stored Credentials for PowerPivot Data Refresh:
http://technet.microsoft.com/en-us/library/ee210671(v=sql.105).aspx
Configure and Use the PowerPivot Unattended Data Refresh Account:
http://technet.microsoft.com/en-us/library/ff773327(v=sql.105).aspx
Note: Please ensure that the account have sufficient permission access to your data source.
In addition, please elaborate your PowerPivot data soure with more detail. If you are using SSAS cube, please try to increase "ExternalConnectionTimeout" property default value to see if this helps. Here is the similar thread for your reference,
please see:
http://social.technet.microsoft.com/Forums/en-US/35b26c06-9e6d-41e5-ae44-bfb1233510ac/ssas2008-ole-db-error-ole-db-or-odbc-error-query-timeout-expired-hyt00?forum=sqldatamining
Regards,
Elvis Long
TechNet Community Support

Query Timeout on stored procedure executed from Access 2010

I am trying to delete old jobs from a SQL 2008 R2 database. I created a stored procedure on the server that deletes all Jobs over 1 year old. The delete can take several minutes to run as it deletes record on several related tables. I am getting a error
"2147217871 - [Microsoft][ODBC SQL Server Driver]Query timeout expired". The query runs fine on the Server. I have tried setting Client timeout to 300 sec but it times out way before 5 min. I am not sure what else I
can do to fix this problem. I am hoping someone has seen this and figured out a fix.
Here is there code
Public Sub Cleanup_Database()
On Error GoTo CleanUp_Err
    Dim cmd As ADODB.Command
    Set cmd = New ADODB.Command
    ODBC_conn = "ODBC;Description=testbox2;DRIVER=SQL Server;" & _
                "SERVER=O2GMSAPPTEST\SQL122DEVL;Trusted_Connection=Yes;" & _
                "APP=Microsoft Office 2010;DATABASE=IMB_TraceData;StatsLog_On=Yes"
    cmd.ActiveConnection = ODBC_conn
    cmd.CommandType = adCmdStoredProc
    cmd.CommandText = "DataBase_Cleanup"
    cmd.Execute
CleanUp_Err:
    Dim i As Long
    Dim str As String
    str = ""
    For i = 0 To Errors.Count - 1
        str = str & Errors(i).Number & "-" & Errors(i).Description & " " & vbNewLine
    Next i
    If str = "" Then
        str = Err.Number & " - " & Err.Description
    End If
    MsgBox str, , "Trace Update"
End Sub


You didn't say how you were setting the client timeout, but this has worked for me in an adp.
'Temporarily increase query timeout, which is an application-wide setting
'CurrentProject.Connection.CommandTimeout = 60 'Too late to change this setting- no effect
Const cstrTimeoutOptionName As String = "OLE/DDE Timeout (Sec)"
Const clngTimeoutSecondsForQuery As Long = 300
strQueryTimeOutOriginal = Application.GetOption(OptionName:=cstrTimeoutOptionName)
Application.SetOption cstrTimeoutOptionName, CStr(clngTimeoutSecondsForQuery)
Paul

How to specify URL in server.xml of Tomcat

Hi Everybody,
I need help.How to specify url in the server.xml.
I developed one application in the Tomcat 3.3.I want to access the by entering uri(like:http:test.com).
What are tags to enter in the server.xml.
Right now i am accessing like:http://localhost:8080/Test/Login.jsp
I want replace this with (www.test.com).
This site will access from anywhere means it is going to live.
So what are things have to do in the server.xml
Please provide the solution.
Regards
Sridhar

Hi Raktim:
I looked around on SDN and it seems that i have found what you have been looking for.
Kindly look at page number 24 and 25 of this page
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4d46fb8a-0b01-0010-9fbe-e4b96533b222
P.S: Kindly assign points if your query is resolved, also close the question to assist other users narrow the search and find solutions

Query timeout for large table

Dear friend,
My view always shows timeout because my table is now having 18,00,000 data row.
Now what should I do with this table? can anyone help me?
another question is, in my work purpose I need to create 5-7 report every day. So every time I need to create view for those report. I can not create procedure always because creating view is easier for me. But the views become slower day by day. My
server is I think quiet good. Xeon cuad core dual processor and Ram is 32.
Is advice will be appreciated.
Thanks in advance

Ya thanks for your time. I am appreciating all the way.
Actually I attach those for present an idea about my database. Most of the time I need to work with just 3 or 4 table which is LC_Profile and student_profile or ROSC database.
I am adding the query but you do not need to go all the query. Just understand how difficult my query use to be. My question is there good way to get result faster than the view?I need to make several report every day. So I use view and join many tables
and need to use many where clause, case, convert time etc. That is why I am asking for suggestion.
SELECT TOP (100) PERCENT dbo.ACF_LCs.YearTrim, dbo.ACF_LCs.EduYr, dbo.vw_Geocode.DivisionID, dbo.vw_Geocode.DivisionB, dbo.vw_Geocode.Division,
dbo.vw_Geocode.DistrictID, dbo.vw_Geocode.District, dbo.vw_Geocode.DistrictB, dbo.vw_Geocode.UpazilaID, dbo.vw_Geocode.Upazila, dbo.vw_Geocode.UpazilaB,
dbo.LCProfile.LCID, dbo.LCProfile.LCYr, dbo.LCProfile.LCNm, dbo.LCProfile.LCNmB, dbo.Vw_Teacher_Active.TeachYr, dbo.Vw_Teacher_Active.TeachEdu,
CASE WHEN TeachEdu = 1 THEN 3000 ELSE 3000 END AS TeacherSalaryOld, dbo.LCProfile.LCAccountNo, dbo.Vw_Teacher_Active.TeachNm,
dbo.Vw_Teacher_Active.TeachSex, dbo.vw_Bank_Branch.LCBankBr, dbo.Vw_Teacher_Active.TeachMob, dbo.LCProfile.UnionID, dbo.UnionCode.UnionB,
dbo.LCProfile.LCVill, MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.DistrictID AS MDistrictID,
MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.UpazilaID AS MUpazilaID, MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LCID AS MLCID,
MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.VisitType, MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LCVisitYr,
MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.Trimister, MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.MOID,
MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LCStatus, MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LC1stVstDt,
MonitoringROSCII.dbo.Venu_Info.VenuType, MonitoringROSCII.dbo.Venu_Info.VenuTypeOthr, MonitoringROSCII.dbo.Venu_Info.NoWindow,
MonitoringROSCII.dbo.Venu_Info.SuffWinAir, MonitoringROSCII.dbo.Venu_Info.FreeArsWater, MonitoringROSCII.dbo.Venu_Info.HigLatrin,
MonitoringROSCII.dbo.Venu_Info.SeatArg, MonitoringROSCII.dbo.Venu_Info.Blackboard, MonitoringROSCII.dbo.Venu_Info.DistrictID AS VDistrictID,
MonitoringROSCII.dbo.Venu_Info.UpazilaID AS VUpazilaID, MonitoringROSCII.dbo.Venu_Info.LCID AS VLCID,
MonitoringROSCII.dbo.Vw_UniformYes.DistrictID AS UDistrictID, MonitoringROSCII.dbo.Vw_UniformYes.UpazilaID AS UUpazilaID,
MonitoringROSCII.dbo.Vw_UniformYes.LCID AS ULCID, MonitoringROSCII.dbo.Vw_UniformYes.RecUniformY,
MonitoringROSCII.dbo.Teacher_Training.DistrictID AS TDistrictID, MonitoringROSCII.dbo.Teacher_Training.UpazilaID AS TUpazilaID,
MonitoringROSCII.dbo.Teacher_Training.LCID AS TLCID, MonitoringROSCII.dbo.Teacher_Training.TcrRecFndTrn, MonitoringROSCII.dbo.LC_Info.PrsnMale,
MonitoringROSCII.dbo.LC_Info.PrsnFemale, MonitoringROSCII.dbo.LC_Info.PrsnStdTot, RIGHT('00' + CONVERT(varchar, dbo.vw_Geocode.DivisionID), 2)
+ RIGHT('00' + CONVERT(varchar, dbo.vw_Geocode.DistrictID), 2) + RIGHT(CONVERT(varchar, dbo.vw_Geocode.UpazilaID), 2) + RIGHT('000' + CONVERT(varchar,
dbo.Vw_Teacher_Active.LCID), 3) AS InstituteID, MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LCStartHr,
MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LCEndHr, dbo.Vw_LCProfile_QStudent_LCwise2013_3.NoStudent AS NoQStudent,
dbo.Vw_LCProfile_QStudent_LCwise2013_3.Stu13, dbo.Vw_LCProfile_QStudent_LCwise2013_3.Stu45, dbo.PO.PO_NM_E, dbo.PO.PO_NM_B,
dbo.vw_Geocode.Status AS UpStatus, dbo.vw_Geocode.Phase, MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.SpecialStatus,
dbo.ACF_LCs.SpecialStatus AS SpecialStatusACF, MonitoringROSCII.dbo.Teacher_Profile.TcrPres, MonitoringROSCII.dbo.Teacher_Profile.TcrMtchLCProf,
CASE WHEN NOT (MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LCID IS NULL) AND LCStatus = 1 AND ((TcrPres = 1 AND TcrMtchLCProf = 2) OR
TcrPres = 2) THEN 0 ELSE 3000 END AS TeacherSalary
FROM dbo.Vw_Teacher_Active RIGHT OUTER JOIN
dbo.PO RIGHT OUTER JOIN
dbo.vw_LC_Functioning RIGHT OUTER JOIN
dbo.Vw_LCProfile_QStudent_LCwise2013_3 INNER JOIN
dbo.ACF_LCs INNER JOIN
dbo.vw_Geocode INNER JOIN
dbo.LCProfile ON dbo.vw_Geocode.DistrictID = dbo.LCProfile.DistrictID AND dbo.vw_Geocode.UpazilaID = dbo.LCProfile.UpazilaID ON
dbo.ACF_LCs.DistrictID = dbo.LCProfile.DistrictID AND dbo.ACF_LCs.UpazilaID = dbo.LCProfile.UpazilaID AND dbo.ACF_LCs.LcID = dbo.LCProfile.LCID ON
dbo.Vw_LCProfile_QStudent_LCwise2013_3.DistrictID = dbo.ACF_LCs.DistrictID AND
dbo.Vw_LCProfile_QStudent_LCwise2013_3.UpazilaID = dbo.ACF_LCs.UpazilaID AND dbo.Vw_LCProfile_QStudent_LCwise2013_3.LCID = dbo.ACF_LCs.LcID ON
dbo.vw_LC_Functioning.DistrictID = dbo.ACF_LCs.DistrictID AND dbo.vw_LC_Functioning.UpazilaID = dbo.ACF_LCs.UpazilaID AND
dbo.vw_LC_Functioning.LCID = dbo.ACF_LCs.LcID LEFT OUTER JOIN
MonitoringROSCII.dbo.Teacher_Training RIGHT OUTER JOIN
MonitoringROSCII.dbo.Venu_Info RIGHT OUTER JOIN
MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo LEFT OUTER JOIN
MonitoringROSCII.dbo.Teacher_Profile ON MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.DistrictID = MonitoringROSCII.dbo.Teacher_Profile.DistrictID AND
MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.UpazilaID = MonitoringROSCII.dbo.Teacher_Profile.UpazilaID AND
MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LCID = MonitoringROSCII.dbo.Teacher_Profile.LCID AND
MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.VisitType = MonitoringROSCII.dbo.Teacher_Profile.VisitType AND
MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LCVisitYr = MonitoringROSCII.dbo.Teacher_Profile.LCVisitYr AND
MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.Trimister = MonitoringROSCII.dbo.Teacher_Profile.Trimister ON
MonitoringROSCII.dbo.Venu_Info.DistrictID = MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.DistrictID AND
MonitoringROSCII.dbo.Venu_Info.UpazilaID = MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.UpazilaID AND
MonitoringROSCII.dbo.Venu_Info.LCID = MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LCID AND
MonitoringROSCII.dbo.Venu_Info.VisitType = MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.VisitType AND
MonitoringROSCII.dbo.Venu_Info.LCVisitYr = MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LCVisitYr AND
MonitoringROSCII.dbo.Venu_Info.Trimister = MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.Trimister LEFT OUTER JOIN
MonitoringROSCII.dbo.Vw_UniformYes ON MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.DistrictID = MonitoringROSCII.dbo.Vw_UniformYes.DistrictID AND
MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.UpazilaID = MonitoringROSCII.dbo.Vw_UniformYes.UpazilaID AND
MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LCID = MonitoringROSCII.dbo.Vw_UniformYes.LCID AND
MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.VisitType = MonitoringROSCII.dbo.Vw_UniformYes.VisitType AND
MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LCVisitYr = MonitoringROSCII.dbo.Vw_UniformYes.LCVisitYr LEFT OUTER JOIN
MonitoringROSCII.dbo.LC_Info ON MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.DistrictID = MonitoringROSCII.dbo.LC_Info.DistrictID AND
MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.UpazilaID = MonitoringROSCII.dbo.LC_Info.UpazilaID AND
MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LCID = MonitoringROSCII.dbo.LC_Info.LCID AND
MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.VisitType = MonitoringROSCII.dbo.LC_Info.VisitType AND
MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LCVisitYr = MonitoringROSCII.dbo.LC_Info.LCVisitYr AND
MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.Trimister = MonitoringROSCII.dbo.LC_Info.Trimister ON
MonitoringROSCII.dbo.Teacher_Training.DistrictID = MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.DistrictID AND
MonitoringROSCII.dbo.Teacher_Training.UpazilaID = MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.UpazilaID AND
MonitoringROSCII.dbo.Teacher_Training.LCID = MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LCID AND
MonitoringROSCII.dbo.Teacher_Training.VisitType = MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.VisitType AND
MonitoringROSCII.dbo.Teacher_Training.LCVisitYr = MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LCVisitYr AND
MonitoringROSCII.dbo.Teacher_Training.Trimister = MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.Trimister ON
dbo.ACF_LCs.DistrictID = MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.DistrictID AND
dbo.ACF_LCs.UpazilaID = MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.UpazilaID AND
dbo.ACF_LCs.LcID = MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LCID ON dbo.PO.DistrictID = dbo.LCProfile.DistrictID AND
dbo.PO.UpazilaID = dbo.LCProfile.UpazilaID ON dbo.Vw_Teacher_Active.DistrictID = dbo.LCProfile.DistrictID AND
dbo.Vw_Teacher_Active.UpazilaID = dbo.LCProfile.UpazilaID AND dbo.Vw_Teacher_Active.LCID = dbo.LCProfile.LCID LEFT OUTER JOIN
dbo.UnionCode ON dbo.LCProfile.UnionID = dbo.UnionCode.UnionID AND dbo.LCProfile.UpazilaID = dbo.UnionCode.UpazilaID AND
dbo.LCProfile.DistrictID = dbo.UnionCode.DistrictID LEFT OUTER JOIN
dbo.vw_Bank_Branch ON dbo.LCProfile.LCBankBr = dbo.vw_Bank_Branch.BranchID
GROUP BY dbo.vw_Geocode.DivisionID, dbo.vw_Geocode.DivisionB, dbo.vw_Geocode.DistrictID, dbo.vw_Geocode.DistrictB, dbo.vw_Geocode.UpazilaID,
dbo.vw_Geocode.UpazilaB, dbo.LCProfile.LCID, dbo.LCProfile.LCYr, dbo.LCProfile.LCNmB, dbo.Vw_Teacher_Active.TeachEdu, dbo.LCProfile.LCAccountNo,
dbo.Vw_Teacher_Active.TeachNm, dbo.Vw_Teacher_Active.TeachSex, dbo.vw_Bank_Branch.LCBankBr, dbo.UnionCode.UnionB, dbo.vw_Geocode.Division,
dbo.vw_Geocode.District, dbo.vw_Geocode.Upazila, MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.DistrictID,
MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.UpazilaID, MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LCID,
MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.VisitType, MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LCVisitYr,
MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.Trimister, MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.MOID,
MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LCStatus, MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LC1stVstDt,
MonitoringROSCII.dbo.Venu_Info.NoWindow, MonitoringROSCII.dbo.Venu_Info.SuffWinAir, MonitoringROSCII.dbo.Venu_Info.FreeArsWater,
MonitoringROSCII.dbo.Venu_Info.HigLatrin, MonitoringROSCII.dbo.Venu_Info.SeatArg, MonitoringROSCII.dbo.Venu_Info.Blackboard,
MonitoringROSCII.dbo.Venu_Info.DistrictID, MonitoringROSCII.dbo.Venu_Info.UpazilaID, MonitoringROSCII.dbo.Venu_Info.LCID,
MonitoringROSCII.dbo.Venu_Info.VenuType, MonitoringROSCII.dbo.Venu_Info.VenuTypeOthr, MonitoringROSCII.dbo.Vw_UniformYes.RecUniformY,
MonitoringROSCII.dbo.Vw_UniformYes.DistrictID, MonitoringROSCII.dbo.Vw_UniformYes.UpazilaID, MonitoringROSCII.dbo.Vw_UniformYes.LCID,
MonitoringROSCII.dbo.Teacher_Training.DistrictID, MonitoringROSCII.dbo.Teacher_Training.UpazilaID, MonitoringROSCII.dbo.Teacher_Training.LCID,
MonitoringROSCII.dbo.Teacher_Training.TcrRecFndTrn, dbo.LCProfile.UnionID, MonitoringROSCII.dbo.LC_Info.PrsnMale, MonitoringROSCII.dbo.LC_Info.PrsnFemale,
MonitoringROSCII.dbo.LC_Info.PrsnStdTot, dbo.LCProfile.LCVill, dbo.Vw_Teacher_Active.TeachMob, RIGHT('00' + CONVERT(varchar, dbo.vw_Geocode.DivisionID), 2)
+ RIGHT('00' + CONVERT(varchar, dbo.vw_Geocode.DistrictID), 2) + RIGHT(CONVERT(varchar, dbo.vw_Geocode.UpazilaID), 2) + RIGHT('000' + CONVERT(varchar,
dbo.Vw_Teacher_Active.LCID), 3), MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LCStartHr,
MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LCEndHr, dbo.Vw_LCProfile_QStudent_LCwise2013_3.NoStudent, dbo.PO.PO_NM_E, dbo.PO.PO_NM_B,
dbo.vw_Geocode.Status, dbo.vw_Geocode.Phase, dbo.Vw_Teacher_Active.TeachYr, dbo.LCProfile.LCNm,
MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.SpecialStatus, dbo.ACF_LCs.YearTrim, dbo.ACF_LCs.EduYr,
dbo.Vw_LCProfile_QStudent_LCwise2013_3.Stu13, dbo.Vw_LCProfile_QStudent_LCwise2013_3.Stu45, dbo.ACF_LCs.SpecialStatus,
MonitoringROSCII.dbo.Teacher_Profile.TcrPres, MonitoringROSCII.dbo.Teacher_Profile.TcrMtchLCProf,
CASE WHEN NOT (MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LCID IS NULL) AND LCStatus = 1 AND ((TcrPres = 1 AND TcrMtchLCProf = 2) OR
TcrPres = 2) THEN 0 ELSE 3000 END
HAVING (dbo.ACF_LCs.YearTrim = 1) AND (dbo.ACF_LCs.EduYr = 2014) AND (dbo.LCProfile.LCYr < 2013) AND
(MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LCVisitYr = 2014) AND (MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.Trimister = 1) AND
(MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.VisitType = 3) AND (NOT (MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LCID IS NULL)) OR
(dbo.ACF_LCs.YearTrim = 1) AND (dbo.ACF_LCs.EduYr = 2014) AND (dbo.LCProfile.LCYr < 2013) AND
(MonitoringROSCII.dbo.VwComplianceMonitoringBasicInfo.LCID IS NULL)
ORDER BY dbo.vw_Geocode.DivisionID
Another problem is ,
Lets say I have a table with id, name, place,address, timeof_attendance and an id which is big int type. This table have 18,00,000 record. and each day increasing with 5000 record. From there I am finding the attandance in every day. So I have to create
4 nested view to come to a result. Now My query shows timeout. If I delete old data then it works. This kind of problem I am facing.
Please advice me.
Thanks

Can we set the query timeout value in a global control place?

hi everyone,
We use the FullTextSqlQuery class to do query stuff, but we have the query timeout issue, the query sometimes timeout, sometimes is normal. I know there is a property from Query class called Timeout, and the default
time is 15 seconds, but we have lots of code involving FullTextSqlQuery.
I want to know is there a gloabal place like the web.config or regedit or somewhere to set the timeout value?
Thanks

Did you ever get an answer? I'm in the same boat...the only way I can seem to not charge tax to my wholesale clients is to set "tax never applies". But I got over 300 products...how can I do it "en mass"???
Anybody??
I tried creating a special tax code at 0% but that didn't do it either.
thanks in advance,
Scot.

Setting query timeout in TopLink 10g

The 10g version of OAAM uses TopLink 10g Release 3 (10.1.3.1.0) (Build 061004) and Oracle JDBC Driver 10.2.0.2.0. We are not using TopLink Essentials. I'm trying to make it so that our queries will timeout and throw an exception if they take too long. I have tried several things, but haven't had any luck so far. I have tried each of the following:
* Adding <property name="javax.persistence.query.timeout" value="1"/> to the <login> element in sessions.xml.
* Setting the query policy in my descriptors like this:
<opm:querying xsi:type="toplink:query-policy">
<opm:timeout>1</opm:timeout>
</opm:querying>
* Calling DatabaseQuery.setQueryTimeout(1).
* Calling setProperty("javax.persistence.query.timeout") on the database login, server session, client session, and unit of work.
In each case, I tried to update a locked table, and the application simply hung until I unlocked the table. I also tried executing select queries that take around 15 seconds to run, and those completed normally. I want to make the application throw a database exception instead. How can I make this work?
I ran this test to eliminate the JDBC driver as a suspect:
java.util.Properties props = new java.util.Properties();
Class.forName("oracle.jdbc.driver.OracleDriver");
props.setProperty("user", "teng_oaam");
props.setProperty("password", "******");
java.sql.Connection conn = java.sql.DriverManager.getConnection("jdbc:oracle:thin:@******:1521:brsadb", props);
System.out.println(conn.getMetaData().getDriverName() + " " +conn.getMetaData().getDriverVersion());
java.sql.Statement stmt = conn.createStatement();
stmt.setQueryTimeout(1);
System.out.println(stmt.getClass());
System.out.println(new java.util.Date());
try {
// this query takes about 20 seconds to execute
java.sql.ResultSet rs = stmt.executeQuery("select * from vcrypt_ip_location_map where from_ip_addr<=1160157297 and to_ip_addr>=1160157297");
} catch (Exception ex) {
ex.printStackTrace();
System.out.println(new
java.util.Date());
The query fails with ORA-01013, which is what I expect to happen, so the problem is not in my JDBC driver.
Thanks,
Josh Davis

public static Integer executeUpdate(TopLinkDBMgr topLinkDBMgr, BharosaDBQuery dbQuery) throws BharosaDBException {
DataModifyQuery query = null;
List args = Collections.EMPTY_LIST;
long startTime = System.currentTimeMillis();
try {
AbstractSession session = (AbstractSession) topLinkDBMgr.beginSession(); +// creates a ClientSession and calls session.beginTransaction()+
query = new DataModifyQuery();
query.setCall(new SQLCall(dbQuery.getQueryString().replace(':', '#'))); +// we still have some SQL queries we haven't changed since we used Hibernate+
Vector arguments = bindArgumentsForRawSql(dbQuery, query);
args = arguments;
query.setQueryTimeout(1);
Object result = session.executeQuery(query, arguments);
return converter.toInteger(result);
} catch (BharosaDBException ex) {
throw ex;
} catch (Exception e) {
throw BharosaDBException.createDBObjectQueryException(dbQuery.getQueryString(), e);
} finally {
topLinkDBMgr.endSession(); +// calls session.endTransaction() on the ClientSession+
long time = System.currentTimeMillis() - startTime;
Level level = getLogLevelForElapsedTime(time);
if (logger.isEnabledFor(level)) {
String message = buildPerformanceMessage(query, args);
logPerformance(level, time, message);
For my test, I lock a table in SQL*Plus, and there is a background process that uses this method to update that table. That process hangs until I release the lock in SQL*PLus.
This is a corner case, though. Most of our updates are done with the UnitOfWork class, so I need to be able to make the queries that it generates time out also.
Thanks,
Josh

Query timeout on 10g thin driver

I'm using the Statement.setQueryTimeout(...) method, but it doesn't seem to work when the server is shutdown.
I do the following:
1) create the statement and set the query timeout to 30 seconds
2) run a query that gets stuck waiting for a lock (ie select for update...)
Now, if I let it run normally I do see the following exception:
ORA-01013: user requested cancel of current operation
However, if I run the same query, but shutdown the database server before releasing the lock I see the client application hang indefinitely. The 30 second timeout never occurs.
If I take a thread dump I see my client is stuck on a socket read, which will never come because the db server was shutdown.
Why isn't the jdbc driver honoring the 30 second timeout if it can't communicate with the server? Does this mean that the timeout is actually controlled on the server-side?
any info is appreciated,
Brett

You didn't say how you were setting the client timeout, but this has worked for me in an adp.
'Temporarily increase query timeout, which is an application-wide setting
'CurrentProject.Connection.CommandTimeout = 60 'Too late to change this setting- no effect
Const cstrTimeoutOptionName As String = "OLE/DDE Timeout (Sec)"
Const clngTimeoutSecondsForQuery As Long = 300
strQueryTimeOutOriginal = Application.GetOption(OptionName:=cstrTimeoutOptionName)
Application.SetOption cstrTimeoutOptionName, CStr(clngTimeoutSecondsForQuery)
Paul

How to Check if Timeout occured

Hi all,
I have a small Doubt in Query timeout. I am using setQueryTimeout() of statement object to set the query time out.I am setting query time out to 15 seconds. My requirement is if the query time out occurs, Then I have to again give the same query. But what's my problem is I don't know how to check when query timeout occurs.Its given that a SQLException will be thrown when timeout occurs, but how can I know if the SQLException is due to timeout or due to some other reason. Please give me some sugessions.
Thanks & Regards,
Vignesh

Try and retrieve a service from it.
Sincerely,
Ted Ueda

Setting Query timeout

Is there anyway to set the ODBC query timeout value? We use SQL Server 7.0?
If not, how do you cancel a long running statement to the DB?

I would have disconnected and reconnected, instead of just clicking New Query.
"Premature optimization is the root of all evil." - Knuth
If I provoked thought, please click the green arrow
If I provoked Aha! please click Propose as Answer

How to create Query (Sq01) fro service contract

hi,
How to create Query for Service contracts , where i need to take a report for sub line items of that particular Service contract.
Ex: we maintain short text - services in the initial screen ,
in the next screen we maintain the sub line items for that short text (Activity numbers).
Please guide me on this.
Regards,

Hi Sowmya,
1 Create User Group (SQ03)
Specify the users who should be authorized to run the query.
2.
Create Infoset (SQ02)
Indicates from which part of the SAP database the data is going to be retrieved and how the data is to be retrieved by the query.
3.
Create Queries (SQ01)
Create the query and arrange the layout
for joining the two tables there should be common field should be available in both the tables then only we can able to join the table and run the query
or use this below link
http://www.sap-img.com/abap/step-for-using-query-sq01-sq02-sq03.htm
Regards,
Pramod

SSAS DRILLTHROUGH - Specified query is too complex error.

Hi Guys,
I'm working on an SSAS 2012 OLAP cube with around 100 dimensions and a single measures group. When I try to run a simple DRILLTHROUGH query such as:
DRILLTHROUGH
MAXROWS 1000 SELECT
FROM [Cube] WHERE ([Measures].[Fact_Count])
I get an error as below.
The specified query is too complex to be evaluated as a single statement.
Does anyone have any experience of this error and how to work around it? If I remove the majority of the dimensions from the cube I can run this query successfully. Looking at the limits set for analysis services I should be well within these.
Thanks in advance
Sean

Hi Scaneyw,
Based on my research, this is a SQL Server Analysis Services (SSAS) design limitation. In SSAS, Drillthrough” generates internal CrossJoin query that contains all attribute hierarchies in measure group. So the error appear when MDX parser receives statement
with> 1000 nodes.
Here are some tips for you to avoid this error.
Reduce number of dimension attribute hierarchies in measure group below 1000.
Delete unneeded attributes and disable Hierarchy for attributes that are only used as properties.
Consider creating smaller Measures Groups with less dimensions + attribute hierarchies.
If you have any concerns about this feature, you can submit a feedback at
http://connect.microsoft.com/SQLServer/Feedback and hope the complete “drillthrough” feature is will be improved in future SQL Server Versions.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Imposing A Query Timeout

How do I impose a query timeout of 20 seconds for a user? A couple of articles mentioned something about creating a PROFILE and assigning the user to that PROFILE; however, I was not sure how to configure the parameters (i.e. cpu_per_call, logical_reads_per_call, etc.) to translate into 20 seconds. Is this as simple as creating a profile with cpu_per_call = 2000?

My recollection is that setQueryTimeout doesn't work particularly well in Oracle's JDBC driver, but it's been some time since I tried.
If you really need this to be wall clock time, you will probably have to write some code in your Java application to create a timer thread. Otherwise, the profile's limit will likely be close to 20 wall clock seconds most of the time.
I'm curious as to why you have a timeout that's so short. Generally, one starts to worry about query timeouts when you have ad hoc SQL statements coming in to a data warehouse, where you're concerned about users accidentally doing silly things like Cartesian products. If you're calling static SQL statements, presumably you've tuned those before they're deployed, so query timeouts aren't necessary.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

"....(-2147217871) Query timeout expired" -- Error in MS Dynamics RMS HQ Manager

When I go into the reports section of HQ Manager, then Quotes/Orders to search a purchase
order, once I start the search it times out with an error,
“The report data could not be loaded due to the following error (-2147217871) Query timeout
expired”
Is this due to .NET 30 second default timeout?
Thanks in advance - Roxy

How is this SSIS related?
Arthur
MyBlog
Twitter

How to specify query timeout

Similar Messages

Maybe you are looking for