How to start an app at a given time?

Hi, just want to know, is there a way to start an app at a given time?
I would like to play some songs(whole album) at a given time...is it
possible? I know the alarm can but only plays one song(I think)
Appreciate it thanks.

No, not with the native Music app (except through the alarm, which only plays one song,  as you have noted). You might check the app store for something.

Similar Messages

  • How to close an app after a given time

    I would like to kill an app like after pandora or music player or an streaming audio or video after a Given  time period.
    Anyone knows an app doing this?

    No, not with the native Music app (except through the alarm, which only plays one song,  as you have noted). You might check the app store for something.

  • How can I count events during a given time with 2 counters (6025 E)

    Hi, How can I count events during a given time (1 sec for example) with 2 counters:
    what is the best way?
    how should i configurate both counter?
    i have done the 1st counter in ev_counter with the gate being the output of the 2nd; and how can i say to the 2nd to trig the first after 1 sec counting? (trig at start and at end) what are the functoins calls in NIDAQ. i am using Visual C++

    Greetings,
    When you perform event counting a gate signal can be added such that if a low signal occurs on the gate, then the counter will pause. When a high signal is seen, the counter will continue counting edges. When you install the NI-DAQ driver you should have installed the examples for Visual C++. The counter examples are found in \Program Files\National Instruments\NI-DAQ\Examples\VisualC\Ctr. Take a look at STCeventCount.C. Be sure to only use STC examples with your hardware. The E-series boards contain the DAQ-STC chip.
    Now, all you need is a gate signal with a width (high time) of 1 second. You could use an external frequency or pulse generator to do this. Or, you could just use the second counter found on your PCI-6025E board. In this
    case you could configure the second counter to generate a single pulse. Take a look at the STCgenerateSinglePulse.C example. As long as the pulse is in a high state for one second you can use it to gate (or time) your counting of events.
    Regards,
    Justin Britten
    Applications Engineer
    National Instruments

  • How do I stop apps from reloading every time I unlock my iPhone?

    How do I stop apps from reloading every time I unlock my iPhone? I have an iPhone 4 and at least 95% of the time I unlock it, some apps act as though they are reinstalling. It only lasts for about 3 seconds if that but it makes me feel like something is wrong with it. Does anyone else have this problem??

    jamiekat wrote:
    some apps act as though they are reinstalling.
    Could you explain what you mean by this? What is happening that makes you think they're reinstalling?

  • How to start a selection from an exact time of the clip?

    Hello,
    I'm a new user of iMovie '08 and I'd like to know how to start the selection of a part of a clip from an exact point.
    Let me explain (I'm not english, so I hope everyone understands) :
    Let's say I have one clip that lasts 1h20' ok? I remember that at 9'20'' there's a scene I want to catch. And It's very important to be at 9'20'' because there's a peculiar frame I want.
    Let's also say that my problem is not about a single point, but a lot of them. I wrote down (as an example) these parts I want.
    9'20''
    15'10''
    36'00''
    ok?
    How do I place myself in that part of the clip? I don't want to look at the scene since I don't remember it well (I wrote down the minutes since I short in memory).
    I hope this is possible. Thank you very much for your help

    QuickTime Player Pro (a $30 upgrade of QuickTime Player, available from Apple) lets you do exactly what you want to do. It lets you select a chunk of any movie using one of three time formats (one is min:sec:frames). You can Copy that chunk and Paste it into a new movie. In other words, it lets you extract just the frames you want that go in a new movie that you save as a standalone movie.
    To use the new movie you would drop it in the iMovie Events folder. (Or more likely, create a new folder in the iMovie Events folder where you drop all your chunk movies.)
    When you next launch iMovie it will generate thumbails for each of your chunk movies. Now you can use them in iMovie 7 like any other import.
    If you have iMovie 6 you can also do it there, for it shows you the min:sec:frames of your one long clip. To use any chunk elsewhere, you would use iMovie 6 to split the clip, then use the Share selected clip only checkbox in the export dialog window to export each chunk to a Full Quality DV movie.
    Karl

  • How to Start Oracle Apps Services?

    Hi All,
    I am using RDBMS : 9.2.0.6.0; Oracle Applications : 11.5.10.2 on AIX.
    I am new to Apps and what to know how can I start and stop the Application and database services.
    Thanks

    Hi,
    I have one more issue regarding the database issue (I am new to apps hope people here don't mind to answer some silly question).
    We all are here to share the knowledge and gain from others isssue! So, please don't hesitate in asking any of your doubt whatsoever.
    For starting your database with spfile first create spfile from the pfile.
    SQL> create spfile from pfile;
    Than you will have to do a little changes in adstrtdb.sql.
    vi adstrtdb.sql
    look for
    startup pfile=/<mount_point>/oracle/<SID>db/9.2.0/dbs/init<SID>.ora
    and delete the pfile=...
    it must just be startup
    now you can start your database and it will start with spfile.
    Thanks,
    Anchorage

  • How to start java app with many jar files

    Hi,
    I have an application that makes use of 50 jar files. When I try to start the application, I need a very long command line like
    java -classpath file1.jar;file2.jar;file3.jar; ... de.me.myapp.myclass
    This is not very handy. Is there a shorter way if all jars are in the same directory? I would like a command like this:
    java -cp /usr/local/my_jars de.me.myapp.myclass
    but this does not work.
    Any Idea if there is an easy solution?
    Andreas

    aaa801 wrote:
    i think there was a way to do it but it eather only worked with javac or java exe which is a lil problem but i did -cp .;./*.jar or something of that sortAs of Java 6, the classpath can contain wildcards.
    http://java.sun.com/javase/6/docs/technotes/tools/solaris/classpath.html

  • Can you please tell me how to close an app so my battery time will last longer?

    How do you close an app on the Iphone 5?

    1) Press the Home button twice and the App's currently running will come up.
    2)Then press and hold any app showing and they will start shaking with an on top left.
    3) Press to end the particular app or app's you want to stop..
    Good Luck

  • How to start two threads at the same time

    Hi there,
      I want to include multithreading in the CVI program. I have two tasks which has no dependence between them, so I would like to start two threads for perform the tasks. I follow the introduction http://www.ni.com/white-paper/3663/en/ to start my code. In my code, I add a command button, when it is pressed, I create two threads to perform the tasks. In each task, I have a big loop and in each iteration, I use ProcessSystemEvents to avoid no response on system message. But it doesn't work actually, the program suspended. I wonder must I initialize the threads in main. I am looking for a way to start the threads in the callback function for a button since I am not starting those threads at the beginning but while it is triggered.
    the main frame of the code looks
    int CVICALLBACK Test1(void *functionData)
    { int i=0;
    for (i = 0; i<100000; i++) {ProcessSystemEvents();}
    return 0;
    int CVICALLBACK Test2(void *functionData)
    int i = 0;
    for (i = 0; i<100000; i++) {ProcessSystemEvents();}
    return 0;
    int CVICALLBACK cmdcb(int panel, int control, int event, void *callbackData, int eventData1, int eventData2)
    { int threadID1, threadID2;
    if (event==EVENT_COMMIT)
    SetPanelAttribute(panelHandle, ATTR_DIMMED, 1);
    CmtScheduleThreadPoolFunction(DEFAULT_THREAD_POOL_HANDLE, Test1, NULL, &threadID1);
    CmtScheduleThreadPoolFunction(DEFAULT_THREAD_POOL_HANDLE, Test2, NULL, &threadID2);
    CmtWaitForThreadPoolFunctionCompletion (DEFAULT_THREAD_POOL_HANDLE, threadID1, 0);
    CmtWaitForThreadPoolFunctionCompletion (DEFAULT_THREAD_POOL_HANDLE, threadID2, 0);
    return 0;
    Attachments:
    TestThread.zip ‏239 KB

    In my opinion your threads may be simply lasting longer than expected due to an incorrect sleep policy of threads paired with with ProcessSystemEvents () in the loop.
    I made up a quick example that shows this behaviour: playing with "Do not sleep" and "Call ProcessSystemEvents" options you can see how threads execute.
    BTW: do not forget to release the thread function IDs at the end of functions.
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?
    Attachments:
    thread.zip ‏7 KB

  • How 2 have 2 Apps open at same time for data sharing?

    I have two music apps that I see being used together on U-Tube and data being moved from one to the other, how do they do this?

    I have no clue what you are talking about that you have seen on YouTube, but you cannot run two apps side by side on the iPad. You can double tap the home button to get the the recents tray and tap on another to launch it, or you can swipe with 4 fingers across the screen to move from app to app if you have multitasking gestures enabled in Settings>General>Multitasking Gestures>On.

  • How to access root apps folder again in Time Machine after a restore?

    I just did a Time Machine full system restore which worked, but now it doesn't look like Time Machine is backing up my root level apps folder. All of my root apps were indeed restored, but if I try to go into Time Machine with my (root) Apps folder open, it switches the folder contents to my user apps instead so I don't have access to the root apps in TM. It doesn't appear to be backing them up at the root level anymore either (nothing in the exclusions that would cause this). Any ideas on what happened here? I have just one admin level account on this machine.

    cubytus wrote:
    Hi everyone,
    I just reformated the MacBook hard drive using Extended HFS+, journaled partition to get rid of the case-sensitiveness, which is incompatible with just ONE of my softwares. As such, TM partition is formatted as Extended HFS+, journaled and case-sensitive.
    This mis-match is likely to cause trouble in the future. If you have, for example, two files named "FileA" and "filea" in the same folder on the TM drive, and try to restore them to your case-ignorant HD, TM is going to have a problem. I've never tried it, so I can't tell you whether it will overlay the first one it restores with the second, or crash, or what, but it can't be done.
    And you may have some of these without realizing it -- if you ever changed a capital to lower-case, or vice-versa, after a file's initial backup, it's a possibility.
    Indeed, I checked directly in the Time Machine tree on the external hard drive with Apple+I keys, and 'cubytus' was not listed in the permissions.
    No, TM automatically denies everything to everybody, among other things, in it's backups, to keep us mere mortals from messing with them. The original file permissions are kept separately, and TM should restore them along with the files, as they were.
    What you're probably seeing is, the user that you're signed-on as won't have those permissions, once TM restores the files. I'd suggest trying the same procedure as your other, or original user -- see if you get the same message.

  • How to start a download at a later time

    I want to start my downloads when my broadband allowance is extended

    Firefox doesn't have a feature like that. Look for an external download manager which does have that feature.

  • How can I make apps show up multiple times on the iphone?

    Hi, call me pedantic if you will, but I want some of my iphone apps to show up in several locations so I can sort out the folders.
    For example, I have loads of games. I want to categorize them as sports games, puzzle games, racing games, etc.. but I also want a folder called favourite games. I want any games in the favourite games folder to show up in the correct category folder as well.
    I know that we probably can't do that with a normal iphone but if I was to jailbreak, could I do it?

    Do you go around chastising others for providing answers to other people's questions just because you don't seem to find the answer helpful? Isn't it really up to the original poster to decide what is helpful and what is not?
    Could I respectfully request that it would be more effective if you either provided an answer to the original question, if you know it, and if not just avoid posting solely to criticize someone who has been helping here for many, many thousands of posts (and been acknowledged for doing so by hundreds of users who have been helped)? Otherwise it really is you that's wasting time and bandwidth.
    Regards.

  • Start X11.app without xinerama

    Hi All,
    Does anybody know how to start X11.app without the xinerama option in Xquartz?
    Do I need to change the .xinitrc and how?
    Thank you in advance for the help.
    G5 Biproc 2GHz   Mac OS X (10.4.8)  

    Java applications will only work if the classpath is set properly. Thus if you double-click on a JAR (or something else associated with Java) you might find that nothing seems to happen. Usually it'll open a DOS windows, start Java, chuck an Error and close the window quickly.
    This doesn't mean that you should go round setting the system classpath to get all your applications to run - that's a recipe for disaster!
    Sometimes it's best just to create a new shortcut for your application, specifying the full Java command for running your application and click on that:
    javaw.exe -cp [your classpath here] MyMainClass
    or
    javaw.exe -cp [your classpath here] -jar MyMainJar.jar
    If the classpath gets long, though, this won't work 'cos Windows will only allow a certain length for the shortcut. You'll have to use an external file to list the classpath contents then. I doubt this will affect you yet, however.
    Hope this helps.

  • How to start Multiple servers?

    Hi,
    plz explain How to start jboss Multiple servers at a time?where is the configure?

    I guess creating multiple server instances in jboss 5 and above versions have different approaches. Below are steps to create multiple server instances in jboss 5:
    [1]. Go to <jboss_home>/servers
    [2]. Copy and past detault instance with appropriate name, like "MyApp"
    [3]. Open <Jboss_home>/servers/MyApp//conf/bindingservice.beans/META-INF/bindings-jboss-beans.xml
    [4]. Find line <parameter>${jboss.service.binding.set:ports-default}</parameter> and change "ports-default" ports-01/ports-02/ports-03 to assign ports 8108/8289/8380 respectively.
    Alternate solution is to use:
    ./run.sh -c node1 -b 0.0.0.0 -Djboss.service.binding.set=ports-01 -Djboss.messaging.ServerPeerID=1
    Hope this helps.
    -RMishra

Maybe you are looking for