How to start one-step workflow..

Hello Friends,
we have one step approval for shopping cart. I know WF Template Id(WS10000129).
I do not know how configure the agent assignment..
how to configure and send workitem to agent and where you maintain agent for this workflow..
Thanks,
John.

Hello Friends,
   I know how the n-step wf works.. I have been implemented in lot of cilents.. But this is the first time i suppose to implement the one step wf.. since n-step wf agent determine is from BAdi, But i don't how configure one-step wf for agent determine..
   does agent determine is from organization structure or any custom table need to develop to send agent to workflow?
   my question is how do i need send agent to workflow..
please you have any documents please send or any url..
Thanks,
John.

Similar Messages

I'm on a Mac and I need to know how to go one step back in Lightroom 5. In other words, what is the Lightroom equivalent of Command Z in Photoshop?

I'm on a Mac and I need to know how to go one step back in Lightroom 5. In other words, what is the Lightroom equivalent of Command Z in Photoshop?

Command Z works for me on Lightroom - always has.
Edit>Undo is the Menu command

Issue in One step workflow activation for Confirmation in SRM 7.0

Dear Experts,
On working to EXtended Classic Scenario, I am configuring one step approval workflow for Confirmation (good receipt) in SRM 7.0
I have standard customisation for Confirmation and activated below object for one-step approval :
BUS2203 SAVED WS10400002 Event Linkage Activated
(one-step approval)
When I am creating a Confirmation with respect to PO in portal, It is showing Approval Pending but It is not going to Manager for approval. While creation of shopping cart (one step approval) is working fine and SC is going to same Manager for approval.
Kindly suggest me, what else required for it.
Thanks in advance,
Pawan Keshwani

Dear Expert,
I am using Application Control Workflow for both SC and Confirmation. Issue is resolved now by this link
No workflow started. Application error occured
Thanks for your Reply.
Regards,
Pawan Keshwani

How to create execution plan in DAC and how to start ETL steps

Hi,
For ETL configuration i have installed and configured,
1. Oracle 10G DB
2. obiee and obia 7.9.6
3. informatica server (here i created repository and integration services)
4. DAC server 10g (setup for DAC is also configured like create warehouse tables etc.,
same installation done on windows for client.
Now i'm struck with execution plan creation.
then
how to start ETL, where start ETL
Source : Oracle EBIZ R12.1.1
target : Datawarehouse (10G DB)
please help me out the steps till ETL start ?
Thanks,
Srik

Hi Srik
I am assuming you have followed the steps required before a load in the library for dac config, csv lookups etc...
Did you check out the example in the documentation?
Here is the link
http://download.oracle.com/docs/cd/E14223_01/bia.796/e14217/windows_ic.htm#BABFGIHE
If you follow those steps and run the execution plan and you can monitor the progress under the current run tab in the dac and the infa workflow monitor.
Regards
Nick
Edited by: Nickho on 2010/06/21 9:24 AM

One Step Workflow Activation for Shopping cart in SRM 7.0

Dear Experts,
On working to EXtended Classic Scenario, I need to configure one step approval for shopping cart in SRM 7.0.
Currently it is providing me Auto Approval by default and based on it PO is being created. I need one-level manager approval shopping cart.
I am working in Demo System of Extended Classic Scenario, I need only one step approval SC without any condition.
Kindly tell me the configuration steps in SRM and please tell me one more thing is there any need of BADI or other coding for one-step approval?
Thanks in Advance,
Regards
Pawan Keshwani
Edited by: pawankeshwani on May 25, 2011 6:22 PM

Hi Ashutosh,
Thanks for quick reply.
As per your comment when i am tring to activate /SAPSRM/C_SC_600_001_SP04 by t-code SCPR20, But It shows me a information pop up Maintain the client role and then Activation is Cancelled.
Kindly tell me what i am missing or any other prerequisite step to do for this BC Set Activation.
Thanks
Pawan Keshwani

HT4623 how to back one step

Hallo every body ! .. Nice to see you.
I am a new be in apple community, olso in iOS.
No wonder in application or OS. Every thing understood in a few hours. But only one make me confuse, I can't find the button to back one step. Ya, one step back to a page before current page. I only knew home button, not by click but push it, the button at the bottom of front.
Any one can help me ?
Thanks in advance.
My regards
Agus Muthoharun

http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

WS14000044 Completion by Purchaser follwed by WS10000129 One Step approval

Hi Folks,
I have activated the WS14000044 Completion by Purchaser workflow and it works just fine.
My problem is that the approval WF WS10000129 One Step approval does not start automatically when the buyer has completed the SC.
The SC creator has to go to the SC and click on change and then order it before it goes to the approver.
Can this be true?
Thanks in advance,
Thomas

Hi
Please go through these links ->
Start conditions for WS14000044
Re: how to start one-step workflow..
Re: SRM Approval error
Related SAP OSS Notes ->
Note 896376 - WS14000044: No notification when shopping basket deleted
Note 916875 - Incorrect status during completion workflow
Note 1045171 - approval workflow: ACCEPT workitem for purchaser/secretary
Hope this will help.
Regards
- Atul

One step purchase order approval

Hi,
I have activated the one step PO approval workflow. How do I assign the agents. I have tried to do it in SPRO - Maintain agent assignemnet for tasks but was unable to do it as I did not get the link.
Any help is appreciated.
Joe Vellaiparambil

Hi
In the SRM transaction OOCU, use path / link
SRM --> SRM-EBP --> SRM-EBP-WFL then you will find agent assignment tab.
Please refer to these links as well.
one step approval
http://help.sap.com/saphelp_srm50/helpdata/en/8b/4fa9585db211d2b404006094b92d37/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/ee/277e3c281f1817e10000000a114084/frameset.htm
PO: 1 step approval - agent assignment
how to start one-step workflow..
Re: how to start one-step workflow..
Workflow without approval not working
Workflow configuration step by step guide...
Re: WS14000145 Approval N-Step for PO skips others approvers
One step purchase order approval
Also try this...
Suggest you to go through the documentation before actually doing it at least once.
Please check this link:
https://websmp208.sap-ag.de/ibc-srm
You will find scenario specific config guides for EBP40. Download the config guide for self-service procurement and gothrough workflow configuration section. This is still the same in SRM50 also.
Regards
- Atul

How to start a workflow by an event

Did somebody know how to start an OWB workflow after an event occur ?
In my application, the OWB workflow must start (and import data) after a record is insert in one of my application database table. Actually, I schedule a job to look in that table every single minute. The problem is that every minute, a connection is open and close on the application database. Also, the user have to wait for one minute (at most) before is job begin to be process. Can someone have a way to start OWB on event by using trigger, queue or something else ?
Thank you,
MB

owf(your_OWF).wf_engine.LaunchProcess(item_type, item_key, process_name);
If your process is defined as:
Module: PRC_MODULE
Process_flow_package: PRC_PACK
Process_name: PROCESS
then ITEM_TYPE is PRC_PACK,
ITEM_KEY can be anything, like p_process_name||'_'|| SYSDATE to make sure it does not get doubled,
and process_name is PROCESS.
So when you call this function it would look like this:
owf(your_OWF).wf_engine.LaunchProcess('PRC_PACK', 'PROCESS_24072009120000', 'PROCESS');

One step purchase order approval - Trigger only in certain cases.

Hi,
I want to trigger the one step workflow approval for Purchase Orders only in ceraitn cases.
When the PO is created from a shopping cart it has to be automatically approved. In other cases the workflow has to be triggerred.
I tried setting the no_further_approval flag to 'X' in the Approval BADI but did not work.
Any Suggestions?
Does the BADI BBP_WFL_APPROV_BADI work for one step approval or is it only for the n step?
Is it better to manipulate the start conditions?
Any help is appreciated.
Joe Vellaiparambil

Hi
If the workflow is not working as expected, refer to SAP Note 322526, Analysis for workflow problems.
You should go with making the start conditions work, as you are aware that only 1 level Approval is required. Try making changes in the start conditions by using transaction - SWB_PROCUREMENT.
Note ->This BADI - BBP_WFL_APPROV_BADI is only recommended for N-step dynamic approval workflow. I don't think you need this BADI as the first alternative.
Refer to few links as well.
http://help.sap.com/saphelp_srm50/helpdata/en/ee/277e3c281f1817e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/2c/e68d406b305537e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/8b/4fa9585db211d2b404006094b92d37/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/0e/bc7d3c6715c854e10000000a11402f/content.htm
Regards
- Atul

Setup one-step auto GR on consignment STO for sourcing plants

Hi MM experts,
Need to set up the auto GR process for some plants
Can any one please help me how to Setup one-step auto GR on consignment STO for sourcing plants?
Appriciate your help.
Thanks in advance.
Regards
Suresh Babu J

Hi,
According to my knowledge there is no standard functionality regarding automatic GR for STO. You need to go for enhancement in this regard. You can consignment PO during MIGO with required settings. Thanking you.

How to start BI Publisher

Hi Experts,
I am the new to BI Publisher. So pls give some helpful links and also suggest me how to start by step by step.
Regards,
Sathyan

Try the BI Publisher forum : BI Publisher

How to start up from 2nd mac? Need to un-trash deleted files...

I accidentally put in trash and emptied a folder with weeks of work and I have to do EVERYTHING POSSIBLE get it back. The Mac shops here in L.A. are all minimum 5-7 days repair turnaround - that means I can't work for five days and they may not be able salvage anything anyway.
Immediately upon realizing what I did, I stopped writing anything to the harddrive - so basically I can't use my computer.
I've found Norton UnErase is useless unless you had FileSaver previously installed and running regular backups.
I don't know anyone local with a Mac but I could take my G3 to work, try to start it with my G5 there and run a shareware app called DataRecoveryTool 2.0.3. So far installing DRT on one of my 3 partitions hasn't worked - it doesn't recognize or list any volumes to recover..
Trouble is, I don't know how to start one Mac from another. I just need an ethernet cable and some keyboard commands, right? I've seen it done long ago.. My cousin in Pasadena has a Powerbook - can I do it with that? What do I need to bring with me?
Would appreciate all help that would lead me towards re-gaining my data. If you're in LA (SFValley) and have experience - I will pay you to help me! TIA
BW G3 400 Mac OS 9.2.x

Hi, 150mph -
Firewire Target Disk Mode could achieve what you want - except that the B&W G3 models can not be the Target machine in such a setup, although they can be the Host machine.
Data Recovery may work only on a disk basis, not a volume basis. Here's a couple of other utilities to try, ones designed to recover data from a mechanically sound drive which refuses to mount.
Data Rescue
Virtual Lab
You may need to pull the drive from the B&W G3 and place it in a multi-drive capable Mac, then use a data recovery utility on the B&W's drive while that other Mac is booted to its normal drive.

Workflow Questions - How to execute the steps in a workflow automatically?

I am using MDM 5.5 SP6.
My Question is how to execute the steps in the workflow automatically. That means NO user interaction.
I have a simple workflow, Start- Process -- Syndicate - Stop.
When a new record added /updated/inserted this workflow will start automatically. The workflow inbox, the workflow status is u2018Receivedu2019 Step is u2018Processu2019. Now I have to right click on the record then u2018Next Stepu2019 then click on u2018Syndicateu2019 then workflow completes automatically.
How to execute the Syndication step automatically?. I donu2019t want to have any user interaction to syndicate these records.
Is this possible?
The reason for this is I want to do some field validation and based on the field validation some assignments then then I want to syndicate these records without user interaction..

Hi,
If you want to do some validations and then based on result assignments on some of the fields before syndicating, then you have to use workflow. Only syndication server will not fulfill this requirement.
you may try by making validation's automatic property as "Error". This way it will not allow to add any record not fulfilling validation. You can also try using calculated fields instead of assignment.
I am not sure if you can make your workflow fully automatic, because atleast one process step is must for any workflow, and process step means user action.
Regards,
Shiv

Shopping cart's One step approval workflow activation

Hi Gurus,
Please reply me for, how to create a shopping cart with One step approval workflow activation?
regards,
George.

Hi George,
The creation of the SC stays the same. Only the event linkage and the start conditions determine which workflow will be started.
Regards,
Martin

How to start one-step workflow..

Similar Messages

Maybe you are looking for