How to startup the database from pfile?

Hi guys.
hope all of you fine.
how to startup the database from pfile?
Thanks.

You can create pfile from spfile
SQL>create pfile='/tmp/pfile.ora' from spfile;
then
SQL>startup pfile='/tmp/pfile.ora';
You can edit pfile.ora file and startup your database with this newly changed database parameter using pfile
And you can define you're using pfile or spfile by issuing:
SQL> show parameter spfile;

Similar Messages

How to recovery the database from a complete backup

I have a 10.2.0.3 database with archive log enabled.
I do a cold backup of database every Sunday night.
I shutdown the database, copy all the database files, control files and redo logs to a backup disk.
Then the database started and running again.
I am trying to test my backup and make sure I can recovery the database to the most current stage using the Sunday backup and the archive logs.
for example: use the backup from 4/01/2012, recover the database to today 4/04/2012 9:00am.
What's the steps of doing this?
I tried to copy all the Sunday backup files to the correct location, start the database, the database is started successfully. However, I don't know how to apply the logs from since the Sunday backup upto now.
Thanks a lot!

hi,
rman is your friend to do backups, restores and recovers of database.
to do a full recover of database, for example to do a test on your current test database (no in crash):
rman time:
startup nomount;
restore controlfile;
alter database mount;
sql now
select archivelog_change#-1 from v$database;
then go back to rman and do the following :
RMAN> run{
2> set until scn xxxxxx;
3> restore database;
4> recover database;
5> alter database open resetlogs;
6> }
**where xxxxx is the result of your sql query
HTH
--edit:
forgot to told that You will need to set your ORACLE_HOME and ORACLE_SID env variables
Edited by: Me_101 on 04-abr-2012 8:41

How to startup the database

Hi,
i have installed oracle database 11gr1 in oel5(32 bit).How to start the database?
Solution needed

Dear user8818950 Muvendran!
Have you created a database yet? If yes then you could do the following steps to start it:
1.) Execute the oraenv script. It should be located in the /usr/local/bin directory
. oranev
ORACLE_SID = [ORCL] ? Please fill in your Oracle SID after the questionmark.
2.) Start your listener
lsnrctl start3.) Start SQL*Plus and connect as sysdba
sqlplus sys/password as sysdba4.) Type in startup to start your database
startupAfter that everything should be fine.
Yours sincerely
Florian W.
Edited by: Florian W. on 05.11.2009 13:54
P.S. If you don't know the name of your database (ORACLE_SID) than you may look into the file /etc/oratab. E. g,
ORCL:/u01/app/oracle/product/10.2.0:NThe first column shows your ORACLE_SID. If you want to start your database everytime your sever starts than you may change the N in the last column to Y.
Best Regards

How to connect the database from one ip to another ip pc.?

hai,
iam new to the obiee. i have the database in the ip : 198.0.0.0(for ex) and i have to connect that through the odbc to my pc ip: 198.0.0.1 (for ex). plz explain how we can connect to the other database from our pc to import that database to our administrator tool in bi.
thanks in advance,

hi...
install client software in your machine
perform, listener configuration using net configuration assistant,
Now using this listener name, you create a DSN and use it in rpd,, you want to develope
OR
go to ODBC Data Source & Administrator and add DSN with Microsoft ODBC for Oracle
in server field, you write your parent machine\listenername
and use this in rpd... i hope the second one works out...

How to clone the database from 8i to 10g

Hi,
I have oracle 8i(8.1.7.4) on solaris 8 machine with application data.
and Now I have installed oracle 10g(10.2.0.4) on redhat - 5 on zlinux machine.
Now I want the same database including all the onject and the data to be available in redhat - 5..
How shoud I start. Please assist me.
RB

user651189 wrote:
Hi,
I have oracle 8i(8.1.7.4) on solaris 8 machine with application data.
and Now I have installed oracle 10g(10.2.0.4) on redhat - 5 on zlinux machine.
Now I want the same database including all the onject and the data to be available in redhat - 5..
How shoud I start. Please assist me.As endian formats are different for Solaris 8 and Redhat (solaris has big, but linux has little), then the easiest way is to use exp/imp utiltiy for migration data.
exp full database from 8i and import it in 10g. You can exp only particular schemas, it really depends, what kind of data you need, how much data You need to import and so on. But exp/imp is the answer how to get data into new database.
Check metalink note 733205.1.

How to refresh the database from target to clone system using RMAN ?

I created the database using RMAN from target (Node A) to clone (Node B)
I want to refresh the data what are all the changes happened in (Not complete database only chages) target to clone system using RMAN ? or any other way?

I want to refresh the data what are all the changes
happened in (Not complete database only chages)
target to clone system using RMAN ? or any other way?Incremental changes can't apply, once database is open using RMAN or any other B&R method.STREAMS can be use to capture and apply changes.
Cheer,
Virag

How to Migrate the database from AIX 4.3 oracle 7 to another Aix 5.3

Hi,
This is the scenario.
Oracle 7 runs in AIX 4.3 now the client wants to upgrade to a new machine with
oracle 10gr2 in AIX 5.3 .
AIX 4.3 in production now.
AIX 5.3 and oracle 10gr2 installed now.
is there any other possibility other than export to migrate to new server.
Regards
Elamaran

Sorry to disappoint you :( It's the same thing as with my car - If it's not without fuel I turn the key and drive ;)
Confined to the development database instance, writing packages is the only thing I'm allowed to do (even forbidden to use some of the Oracle supplied ones).
There are other guys having to do the rest.
Regards
Etbin

How to download the database form the call manager 7 to excel?

how to download the database from the call manager 7 to excel document?

No, it never did - the "ask" for the DRS folks to provide unencryption capabilities for their TARs is still out there (several other BUs want this) but so far as I know there's been zero movement on it. I've about given up hope on the DRS folks at this point - pretty clear this isn't a priority for them and I don't see much in the way of any kind of improvements on the product schedule for them at all, this included.
As a side note I've been pushing the Connection product managers to give us off box file system access to limited directories via a proxy service and roles (i.e. similiar to the ODBC proxy but for SFTP access) - armed with this we can provide our own (far superior) disaster recovery tools that work on a pull model instead of the full push DRS is built on - this would get partial backups, individual restores, about 6x increase in performance (more actually - I have a prototype that is hovering right around 10x the speed of DRS end to end), smaller backups, requires less space and resources on the server etc... etc... Fun stuff like doing a full backup on Sunday mornings and deltas every day of the week after that and another full backup Sunday etc... would be possible. Imagine.
I'll probably get more traction with that but it's a long road I'm afraid - as ever, asking your account team to enter a PERs helps - makes it more difficult for the product folks to delay on assigning engineering resources to such efforts.

How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

If the data is on a remote server (for example, PHP running on a web server, talking to a MySQL server) then you do this in an AIR application the same way you would do it with any Flex application (or ajax application, if you're building your AIR app in HTML/JS).
That's a broad answer, but in fact there are lots of ways to communicate between Flex and PHP. The most common and best in most cases is to use AMFPHP (http://amfphp.org/) or the new ZEND AMF support in the Zend Framework.
This page is a good starting point for learning about Flex and PHP communication:
http://www.adobe.com/devnet/flex/flex_php.html
Also, in Flash Builder 4 they've added a lot of remote-data-connection functionality, including a lot that's designed for PHP. Take a look at the Flash Builder 4 public beta for more on that: http://labs.adobe.com/technologies/flashbuilder4/

How to get the Database type from weblogic Db connection

I want to use database version control in my application . that means different database type use different Sql Statement. Such as in weblogic7.0 if I create SqlServer JDBC pool then I will use some special Sqlserver sql Statement . such as some join statement. If I create Oralce JDBC pool then I have to use different Sql statement . because these two database support different Sql statement.
What my question is how to get the database type from the connection.

For a normal jdbc driver you can use
Connection.getMetaData()
To get the meta data, in particular the getDatabase...() methods.
That might or might not work.
However, at the very least in the server you have access to the weblogic properties so you can parse the pool property to figure it out.

How to save the string from JTextFied to database?

can i know how to save the data from JTextFied to databse. Is it using update?

The most straightforward way would be something like:
String myKey=myKeyField.getText();
String foo=fooField.getText();
String sql="update mytable set foo='"+foo+"' where mykey='"+myKey+"'";
connection.createStatement().executeUpdate(sql);
This example assumes that the input fields cannot possibly contain quotes or the string won't be built correctly. Which by the way brings up a question I'd be interested in hearing others answer: What do you do about this? Sometimes I use PreparedStatement which handles that problem, other times I write my own little function to escape the string properly.
You can also read the record into a ResultSet and use ResultSet.update(). I'm mostly using mySql and I found that in mySql ResultSet.update just creates a SQL update statement like I did above and executes it, so the only real advantage would be if you find the syntax more convenient. Perhaps other database drivers do something different that would give other pros and cons.

How to display the data from database(MS access) to a textbox

anyone know ?

how to display the data from database(MS access) to a
textboxThe reply hasn't changed over these years. Read the tuutorial on how to fetch the data. You can display it anywhere you feel like. :)
http://java.sun.com/docs/books/tutorial/jdbc/

How to change the database character set on physical standby database?

Hi,
We have a database with character set WE8ISO8859P1 and migrated the character set to WE8MSWIN1252 using csscan/csalter scripts. This database has a physical standby database setup also and after the migration, the physical standby database is still showing the character set as WE8ISO8859P1. How can I change the characterset on the physical standby? I raised a Service Request with Oracle, and they said that recreating the standby database is the only supported way of changing the char set on the standby database. Is this true?
Thanks,
Sreekanth

Thank you, Robert, for your reply.
The standby is in sync with the primary.
see below
SYS@sisprod>select * from v$dataguard_stats;
NAME VALUE UNIT TIME_COMPUTED
apply finish time +00 00:00:00.0 day(2) to second(1) interval 12-NOV-2009 14:02:46
apply lag +00 00:00:00 day(2) to second(0) interval 12-NOV-2009 14:02:46
estimated startup time 11 second 12-NOV-2009 14:02:46
standby has been open N 12-NOV-2009 14:02:46
transport lag +00 00:00:00 day(2) to second(0) interval 12-NOV-2009 14:02:46
SYS@sisprod>
I am selecting from v$nls_parameters;
I don't know how to restore the controlfile from primary. Could you please tell me how to do it?
Thanks,
Sreekanth

How to enter the database in oracle 11g!!

Hi all,
I have installed Oracle 11g , and the SCOTT,SYS,SYSTEM account are locked ( I guess) as i am UNABLE TO ENTER THE DATABASE.
When I open SQL+ , a cmd prompt will appear requesting username ( for which I tried SYS,SYSTEM,SCOTT) upon pressing enter, it request's password ,HERE IS THE PROBLEM .What every i try to enter in the password field, doesn’t get displayed there ,I thick its not accepting anything at all.
I tried sys as sysdba as the username ,didn't work either(insufficent privilages)(windows info: OS-XP sp2, account- administrator),as I am new to SQL Kindly ,SUGGEST ME , HOW TO ENTER THE DATABASE.
Thanks & Regards
keerthi kumar

SET
sqlplus
/ as sysdba
startup
exit
THE RESULT FROM THE cmd PROMPT FOR THE ABOVE LINES....
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\KEERTHI KUMAR>SET
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\KEERTHI KUMAR\Application Data
CLIENTNAME=Console
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=KEERTHIKUMAR
ComSpec=C:\WINDOWS\system32\cmd.exe
DEFAULT_CA_NR=CA18
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\KEERTHI KUMAR
LOGONSERVER=\\KEERTHIKUMAR
NUMBER_OF_PROCESSORS=1
OS=Windows_NT
Path=E:\app\KEERTHIKUMAR\product\11.2.0\dbhome_1\bin;C:\WINDOWS\system32;C:\WIND
OWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Common Files\Teleca Shared;C:\Prog
ram Files\Smart Projects\IsoBuster;
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 15 Model 44 Stepping 2, AuthenticAMD
PROCESSOR_LEVEL=15
PROCESSOR_REVISION=2c02
ProgramFiles=C:\Program Files
PROMPT=$P$G
P_SCHEMA=D:\Solid Edge V18\etc\UGSchemas
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\KEERTH~1\LOCALS~1\Temp
TMP=C:\DOCUME~1\KEERTH~1\LOCALS~1\Temp
USERDOMAIN=KEERTHIKUMAR
USERNAME=KEERTHI KUMAR
USERPROFILE=C:\Documents and Settings\KEERTHI KUMAR
windir=C:\WINDOWS
C:\Documents and Settings\KEERTHI KUMAR>sqlplus
SQL*Plus: Release 11.2.0.1.0 Production on Sun Aug 1 07:26:30 2010
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter user-name: / as sysdba
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name: startup
Enter password:

How to restore a database from backup taken in standby database

Its our environment standard to run backup in standby database.
Now we have to perform refresh production database to UAT database.
I have performed normal refresh/duplicate. Is there any additional procedures need to be followed to perform refresh from standby database backup

RMAN Restoration to New Server with Different Directory and New Database Name
In this case, I have an existing production database with RMAN Level 0 backup:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO 'C:\flash_recovery_area\galaxy\backupsets\autobackup\SAMSUNG-ctl_%F';
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 'C:\flash_recovery_area\galaxy\backupsets\level0\level0-%d-%T-%U' MAXPIECESIZE 4G;
DELETE NOPROMPT ARCHIVELOG ALL COMPLETED BEFORE 'SYSDATE - 7';
SHOW ALL;
REPORT SCHEMA;
LIST BACKUP OF DATABASE;
REPORT NEED BACKUP;
REPORT UNRECOVERABLE;
LIST EXPIRED BACKUP BY FILE;
LIST ARCHIVELOG ALL;
REPORT OBSOLETE;
CROSSCHECK BACKUP DEVICE TYPE DISK;
CROSSCHECK COPY OF ARCHIVELOG ALL;
DELETE NOPROMPT EXPIRED BACKUP DEVICE TYPE DISK;
DELETE NOPROMPT OBSOLETE DEVICE TYPE DISK;
RUN {
sql 'alter system archive log current';
BACKUP INCREMENTAL LEVEL 0 DATABASE PLUS ARCHIVELOG DELETE INPUT;
LIST BACKUP OF DATABASE;
REPORT NEED BACKUP;
REPORT UNRECOVERABLE;
LIST EXPIRED BACKUP BY FILE;
LIST ARCHIVELOG ALL;
REPORT OBSOLETE;
CROSSCHECK BACKUP DEVICE TYPE DISK;
CROSSCHECK COPY OF ARCHIVELOG ALL;
DELETE NOPROMPT EXPIRED BACKUP DEVICE TYPE DISK;
DELETE NOPROMPT OBSOLETE DEVICE TYPE DISK;
The backupsets will be restored into a new server with different file structure. The database will also be different. In the new server, I have created a blank database (SID or CUSTOM database with the name DBGRID). This is easier so I won't have to create any directories, user ORADIM or create new PWFile.
This document assumes that a blank (starter) database has been created in the new server. The RDBMS version is the same as the source database.
In this example, the source database name is GALAXY and the target database name is DBGRID.
Let me know if you have any feedback or comments. All I want is to share these steps with you and make it better so we can help other DBA's as well.
Steps start here
-->
ORIGINAL DATABASE: GALAXY
DUPLICATE DATABASE: DBGRID
FROM THE SOURCE DATABASE (GALAXY)
1. Backup the database using RMAN incremental backups.
2. Check the RMAN logs generated and look for the result of the command:
C:\Users\Administrator>set ORACLE_SID=GALAXY
C:\Users\Administrator>rman target /
Recovery Manager: Release 11.2.0.1.0 - Production on Wed Aug 1 06:55:08 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: GALAXY (DBID=3578870300)
RMAN> report schema;
using target database control file instead of recovery catalog
Report of database schema for database with db_unique_name GALAXY
List of Permanent Datafiles
===========================
File Size(MB) Tablespace RB segs Datafile Name
1    680      SYSTEM *** C:\ORACLE\ORADATA\GALAXY\SYSTEM01.DBF
2    510      SYSAUX *** C:\ORACLE\ORADATA\GALAXY\SYSAUX01.DBF
3    140      UNDOTBS1 *** C:\ORACLE\ORADATA\GALAXY\UNDOTBS01.DBF
4    5        USERS *** C:\ORACLE\ORADATA\GALAXY\USERS01.DBF
5    106      EXAMPLE *** C:\ORACLE\ORADATA\GALAXY\EXAMPLE01.DBF
6    2048     ALLINDEX *** C:\ORACLE\ORADATA\GALAXY\ALLINDEX01.DBF
List of Temporary Files
=======================
File Size(MB) Tablespace Maxsize(MB) Tempfile Name
1    29       TEMP 32767 C:\ORACLE\ORADATA\GALAXY\TEMP01.DBF
This command shows all the physical database files that will be backed-up by the current RMAN job.
List the online redolog files:
SQL> select * from v$logfile;
GROUP# STATUS TYPE    MEMBER IS_
3         ONLINE C:\ORACLE\ORADATA\GALAXY\REDO03A.LOG     NO
3         ONLINE C:\ORACLE\ORADATA\GALAXY\REDO03B.LOG     NO
2         ONLINE C:\ORACLE\ORADATA\GALAXY\REDO02A.LOG     NO
2         ONLINE C:\ORACLE\ORADATA\GALAXY\REDO02B.LOG     NO
1         ONLINE C:\ORACLE\ORADATA\GALAXY\REDO01A.LOG     NO
1         ONLINE C:\ORACLE\ORADATA\GALAXY\REDO01B.LOG     NO
6 rows selected.
3. Since the target server has different structure, it is easier to use a pfile to startup the database rather than restoring the spfile from backup.
C:\Users\Administrator>set ORACLE_SID=GALAXY
C:\Users\Administrator>sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Wed Aug 1 06:56:14 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> create pfile='C:\TEMP\initGALAXYrman.ora' from spfile;
File created.
4. Edit the pfile to have the following parameters:
(These parameters has been edited to fit the target database requirements)
galaxy entries has been changed to dbgrid. Directories has been corrected as well.
dbgrid.__db_cache_size=192937984
dbgrid.__java_pool_size=4194304
dbgrid.__large_pool_size=4194304
dbgrid.__oracle_base='D:\app\Administrator'#ORACLE_BASE set from environment
dbgrid.__pga_aggregate_target=281018368
dbgrid.__sga_target=524288000
dbgrid.__shared_io_pool_size=0
dbgrid.__shared_pool_size=301989888
dbgrid.__streams_pool_size=4194304
*.audit_file_dest='D:\app\Administrator\admin\DBGRID\adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='D:\oradata\DBGRID\control01.ctl','D:\oradata\DBGRID\control02.ctl'
*.db_block_size=8192
*.db_domain=''
Leave as it is for now --> *.db_name='GALAXY'
*.db_recovery_file_dest='D:\fra\backupsets\duplicate'
*.DB_RECOVERY_FILE_DEST_SIZE=4G
*.diagnostic_dest='D:\app\Administrator'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=DBGRIDXDB)'
*.job_queue_processes=1000
*.log_archive_dest_1='location=D:\fra\backupsets\archs'
*.log_buffer=10485760
*.memory_target=805306368
*.open_cursors=300
*.processes=800
*.remote_login_passwordfile='EXCLUSIVE'
*.session_cached_cursors=300
*.sessions=885
*.undo_tablespace='UNDOTBS1'
Make sure that all the directory values in this edited pfile are existing in the target server.
5. Copy all the RMAN backup pieces generated in the source database. Transfer the edited pfile as well. Make sure that all directories presented in the pfile exists in the target server.
In this example, RMAN backupsets are located at:
Backupsets:
Level0 and Level1 = D:\fra\backupsets\duplicate\level0 , D:\fra\backupsets\duplicate\level1
Controlfile and Spfile Autobackup = D:\fra\backupsets\duplicate\autobackup
Edited pfile initGALAXYrman= C:\TEMP\initDBGRIDnew.ora
FROM THE TARGET DATABASE (DBGRID)
6. Connect to RMAN and perform database duplication using RMAN backup restoration
C:\Users\Administrator>rman target /
Recovery Manager: Release 11.2.0.1.0 - Production on Wed Aug 1 07:26:45 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database (not started)
RMAN> set dbid = 3578870300; --> THIS IS THE DBID OF THE SOURCE DATABASE!
executing command: SET DBID
RMAN> startup nomount pfile='C:\TEMP\initDBGRIDnew.ora'; -->restore the edited pfile
Oracle instance started
Total System Global Area     535662592 bytes
Fixed Size 1375792 bytes
Variable Size 327156176 bytes
Database Buffers 192937984 bytes
Redo Buffers 14192640 bytes
RMAN> restore controlfile from 'D:\fra\backupsets\duplicate\autobackup\SAMSUNG-CTL_C-3578870300-20120801-00'; -->restore the correct controlfile
Starting restore at 01-AUG-12
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=19 device type=DISK
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:07
output file name=D:\ORADATA\DBGRID\CONTROL01.CTL
output file name=D:\ORADATA\DBGRID\CONTROL02.CTL
Finished restore at 01-AUG-12
RMAN> alter database mount; -->mount the database
database mounted
released channel: ORA_DISK_1
RMAN> catalog start with "D:\fra\backupsets\duplicate";
--> catalog the location of the backup pieces to make it known to the control file
Starting implicit crosscheck backup at 01-AUG-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=19 device type=DISK
Crosschecked 3 objects
Finished implicit crosscheck backup at 01-AUG-12
Starting implicit crosscheck copy at 01-AUG-12
using channel ORA_DISK_1
Finished implicit crosscheck copy at 01-AUG-12
searching for all files in the recovery area
cataloging files...
no files cataloged
searching for all files that match the pattern D:\fra\backupsets\duplicate
List of Files Unknown to the Database
=====================================
File Name: D:\FRA\BACKUPSETS\duplicate\autobackup\SAMSUNG-CTL_C-3578870300-20120801-00
File Name: D:\FRA\BACKUPSETS\duplicate\level0\LEVEL0-GALAXY-20120801-01NHGTGV_1_1
File Name: D:\FRA\BACKUPSETS\duplicate\level0\LEVEL0-GALAXY-20120801-02NHGTIA_1_1
File Name: D:\FRA\BACKUPSETS\duplicate\level0\LEVEL0-GALAXY-20120801-03NHGTMT_1_1
Do you really want to catalog the above files (enter YES or NO)? YES
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: D:\FRA\BACKUPSETS\duplicate\autobackup\SAMSUNG-CTL_C-3578870300-20120801-00
File Name: D:\FRA\BACKUPSETS\duplicate\level0\LEVEL0-GALAXY-20120801-01NHGTGV_1_1
File Name: D:\FRA\BACKUPSETS\duplicate\level0\LEVEL0-GALAXY-20120801-02NHGTIA_1_1
File Name: D:\FRA\BACKUPSETS\duplicate\level0\LEVEL0-GALAXY-20120801-03NHGTMT_1_1
RMAN> list backup summary; -->check your backup they are now known
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
1 B A A DISK 01-AUG-12       1       2 NO         TAG20120801T011054
2 B 0 A DISK 01-AUG-12       1       2 NO         TAG20120801T011137
3 B A A DISK 01-AUG-12       1       2 NO         TAG20120801T011405
RMAN> list archivelog all; -->list you archivelog for point in time recovery
List of Archived Log Copies for database with db_unique_name GALAXY
=====================================================================
Key Thrd Seq     S Low Time
26 1    29      A 01-AUG-12
Name: D:\FRA\BACKUPSETS\ARCHS\ARC0000000029_0785167457.0001
Perform database restoration and recovery. The sequence number is Seq+1 for complete recovery, so that will be 29 + 1 = 30. You can also do recovery via SCN or time based recovery.
Remember in the previous step: RMAN> REPORT SCHEMA;
Each datafile has a corresponding datafile number.
Follow the format to convert them into their respective new restoration directory in the target server.
SET NEWNAME has the format:
SET NEWNAME FOR DATAFILE [FILE NUMBER IN THE REPORT SCHEMA COMMAND] TO
‘[NEW LOCATION AND FILENAME OF THE DATAFILES]’;
RMAN> run {
2> SET UNTIL SEQUENCE 30 THREAD 1;
3> set newname for datafile 1 to 'D:\oradbgrid\oradata\SYSTEM01.DBF';
4> set newname for datafile 2 to 'D:\oradbgrid\oradata\SYSAUX01.DBF';
5> set newname for datafile 3 to 'D:\oradbgrid\oradata\UNDOTBS01.DBF';
6> set newname for datafile 4 to 'D:\oradbgrid\oradata\USERS01.DBF';
7> set newname for datafile 5 to 'D:\oradbgrid\oradata\EXAMPLE01.DBF';
8> set newname for datafile 6 to 'D:\oradbgrid\oradata\ALLINDEX01.DBF';
9> restore database;
10> switch datafile all;
11> recover database;
12> }
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 01-AUG-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=19 device type=DISK
channel ORA_DISK_1: starting datafile backup set restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_DISK_1: restoring datafile 00001 to D:\oradbgrid\oradata\SYSTEM01.DBF
channel ORA_DISK_1: restoring datafile 00002 to D:\oradbgrid\oradata\SYSAUX01.DBF
channel ORA_DISK_1: restoring datafile 00003 to D:\oradbgrid\oradata\UNDOTBS01.DBF
channel ORA_DISK_1: restoring datafile 00004 to D:\oradbgrid\oradata\USERS01.DBF
channel ORA_DISK_1: restoring datafile 00005 to D:\oradbgrid\oradata\EXAMPLE01.DBF
channel ORA_DISK_1: restoring datafile 00006 to D:\oradbgrid\oradata\ALLINDEX01.DBF
channel ORA_DISK_1: reading from backup piece D:\FRA\BACKUPSETS\DUPLICATE\LEVEL0\LEVEL0-GALAXY-20120801-02NHGTIA_1_1
channel ORA_DISK_1: piece handle=D:\FRA\BACKUPSETS\DUPLICATE\LEVEL0\LEVEL0-GALAXY-20120801-02NHGTIA_1_1 tag=TAG20120801T011137
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:02:06
Finished restore at 01-AUG-12
Starting recover at 01-AUG-12
using channel ORA_DISK_1
starting media recovery
archived log for thread 1 with sequence 29 is already on disk as file D:\FRA\BACKUPSETS\ARCHS\ARC0000000029_0785167457.0001
archived log file name=D:\FRA\BACKUPSETS\ARCHS\ARC0000000029_0785167457.0001 thread=1 sequence=29
media recovery complete, elapsed time: 00:00:01
Finished recover at 01-AUG-12
Log in to SQL*Plus to recreate the redolog files.
Format:
ALTER DATABASE RENAME FILE ‘[OLD REDOLOG LOCATION]’ TO ‘[NEW REDOLOG LOCATION]’;
C:\Users\Administrator>sqlplus "/ as sysdba"
SQL*Plus: Release 11.2.0.1.0 Production on Wed Aug 1 08:54:27 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select instance_name, status from v$instance;
INSTANCE_NAME STATUS
dbgrid MOUNTED
SQL> ALTER DATABASE RENAME FILE 'C:\ORACLE\ORADATA\GALAXY\REDO03A.LOG' TO 'C:\oracle\oradata\dbgrid\REDO03A.LOG';
Database altered.
SQL> ALTER DATABASE RENAME FILE 'C:\ORACLE\ORADATA\GALAXY\REDO03B.LOG' TO 'C:\oracle\oradata\dbgrid\REDO03B.LOG';
Database altered.
SQL> ALTER DATABASE RENAME FILE 'C:\ORACLE\ORADATA\GALAXY\REDO02A.LOG' TO 'C:\oracle\oradata\dbgrid\REDO02A.LOG';
Database altered.
SQL> ALTER DATABASE RENAME FILE 'C:\ORACLE\ORADATA\GALAXY\REDO02B.LOG' TO 'C:\oracle\oradata\dbgrid\REDO02B.LOG';
Database altered.
SQL> ALTER DATABASE RENAME FILE 'C:\ORACLE\ORADATA\GALAXY\REDO01A.LOG' TO 'C:\oracle\oradata\dbgrid\REDO01A.LOG';
Database altered.
SQL> ALTER DATABASE RENAME FILE 'C:\ORACLE\ORADATA\GALAXY\REDO01B.LOG' TO 'C:\oracle\oradata\dbgrid\REDO01B.LOG';
Database altered.
Open the database in resetlogs option. Create spfile from the edited pfile then bounce the database.
RMAN> alter database open resetlogs;
database opened
SQL> create spfile from pfile='C:\TEMP\initDBGRIDnew.ora';
File created.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 535662592 bytes
Fixed Size 1375792 bytes
Variable Size 327156176 bytes
Database Buffers 192937984 bytes
Redo Buffers 14192640 bytes
Database mounted.
Database opened.
SQL> select instance_name, status from v$instance;
INSTANCE_NAME STATUS
dbgrid OPEN
Create a new TEMP tablespace, make this as the new default temporary tablespace. Drop the old TEMP tablespace. Restart the database.
SQL> CREATE TEMPORARY TABLESPACE TEMP01 TEMPFILE 'D:\oradbgrid\oradata\TEMP0101.dbf' SIZE 200M;
Tablespace created.
SQL> ALTER DATABASE DEFAULT TEMPORARY TABLESPACE TEMP01;
Database altered.
SQL> drop tablespace TEMP including contents and datafiles;
Tablespace dropped.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance sta

How to startup the database from pfile?

Similar Messages

Maybe you are looking for