How to stop the new health application from Count the steps/ woking background?

how to stop the new health application from Count the steps/ woking background?
I really need your help

I agree with Mr. Hall that using mx.controls.Alert in Flex may be a better route.
Show the Alert like this:
// show an alert with a question and yes and no choices
Alert.show( "Would you like to go to the Adobe Forums?", "Question",
     Alert.YES | Alert.NO, this, closeHandler, null, Alert.YES );
Then handle the response in the closeHandler() function:
protected function closeHandler( closeEvent:CloseEvent ):void
if( event.detail == Alert.YES )
     navigateToURL( new URLRequest('http://forums.adobe.com'), '_self' );
else if( event.detail == Alert.NO )
     // they chose no
The following documentation on Alerts may be helpful:
http://www.flexafterdark.com/docs/ActionScript-Alert
Let me know if that helps...
Ben Edwards

Similar Messages

Names of many city and villages on the new maps application are in the wrong position

Is only me with this problem? Using maps with iOS 6 names of many small villages in Sardinia are positioned very far from the correct place

That's greate!
Original Excellent Blackberry Themes
Free Blackberry Games Applications
Excellent Blackberry Wallpapers
Also Free Android Games
All in blackberrygarden.com

How to stop lion recovery disk assistant from downloading?

Since I planned to upgrade the stock disk on my macbook pro I created a USB stick backup of the Lion OS using Lion recovery disk assistant. It built a bootable copy of my Lion OS. I replaced the drive, booted from the USB stick Lion, formatted the new drive with disk utility with one OSX partition, and bunch of Linux partitions for the planned dual/triple/etc. boot. I then used the recovery disk menu to reinstall OSX on the new disk. It took off and started the download just like while booting with R key or from the recovery partition AGAIN!. This is a 2 hour proposition and is totally ridiculous. I need to be able to reinstall without downloading Lion every time. Any ideas on how to stop this new Apple invention from doing this download?

If you read the Disk Recovery Assistant documentation all that it does is put a copy of the Recovery HD onto the flash drive. There is no OS on it to reinstall, hence the reason for the Internet download.
If you wish to have a true bootable installer flash drive for your system, then here's what is involved. Start by going to this link: Downloading Hardware Specific Lion Installers. Follow the instructions very, very carefully because this can be a bit tricky.
Once you have the installer application:
Make Your Own Lion Installer
1. After downloading Lion you must first save the Install Mac OS X Lion application. After Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing Lion.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to several hours depending upon the drive size.
3. Locate the saved Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the InstallESD.dmg disc image to the flash drive as follows:
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the InstallESD.dmg disc image file into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable Lion installer that you can use without having to re-download Lion.

The new Photo application only goes to 50% after pushing the "Getting Started" button. Is there a work-a-round?

I've tried unsuccessfully to move over to the new Photos application. Every time I press the get started button it does well until it reaches 50%. There it hangs. I do have a large number of raw & jpg images in my pictures directory, but iPhoto seemed ok with it previously. I did leave it running over night and it was still at 50% the next morning. I am running on a 2011 MBP 17" running OS X 10.10.3. I have 400G of free space. I'm ok to throw away my old iPhoto library. I only used it for organizing. I use Adobe PS & LR for editing. I want to be able to do a similar thing with the new Photo Application. Timeline the photos, send them to iCloud and distribute them to my devices ... iPad, iPhone, iPod Touch

I've tried unsuccessfully to move over to the new Photos application. Every time I press the get started button it does well until it reaches 50%. There it hangs. I do have a large number of raw & jpg images in my pictures directory, but iPhoto seemed ok with it previously. I did leave it running over night and it was still at 50% the next morning. I am running on a 2011 MBP 17" running OS X 10.10.3. I have 400G of free space. I'm ok to throw away my old iPhoto library. I only used it for organizing. I use Adobe PS & LR for editing. I want to be able to do a similar thing with the new Photo Application. Timeline the photos, send them to iCloud and distribute them to my devices ... iPad, iPhone, iPod Touch

How do you change the distance units in the new Maps application on Mavericks from KM to miles?

How do you change the distance units in the new Maps application on Mavericks from KM to miles?

The scale in Maps follows your regional settings in System Preferences > Language & Region > Region.
Selecting United States, for example, will use English units (feet and statute miles).
There may be other methods I'm unaware of.

How do I move a photo into an album in the new Photos application?

How do I move a photo into an album in the new Photos application?

The simplest way is to show the Sidebar at all times - you can reveal it with options-command-S ⌥⌘S.
With the sidebar visible, you can simply drag the photos from the Moments or other albums to the album in the sidebar. You can select and drag multiple photos at a time by selecting the first photo, holding down the shift key and selecting more photos. If the album does not yet exist, select the photos and press ⌘N for "File > New album" to create a new album with the selected photos.

How do I get the new photos albums from my imac to sync to my iphone?

Last week my iMac did the software update that replaced iPhoto on my iMac with the new Photos application.
Since then, I have migrated all my iphoto library to the Photos library and have been able to further sort my photos in the albums area.
I have backed up my iPhone 6, and then completed a sync so it would be updated accordingly with the photos app as opposed to the previous iPhoto app. In iTunes everything looks fine, in Photos everything looks fine, and there was a bit of a hiccup once or twice with trying to complete the sync process (although I imagine this was simply due to the mere nature of the number of images have to sync as I do photography and I model so over 32000 photos to sync). Finally I was able to complete the sync process, and all seemed fine.
I then went in to Photos app on the iPhone 6, and all the photos are there, all the albums are there, but all the albums are empty even though the photos are on the phone in the photos sections???
I would really like to know how to get the albums to sync properly to my iPhone 6 from an iMac, does anyone know what to do?
Also, my iPhone since then has been dropping battery life significantly and getting very warm over short periods of time, but I have had no applications open, the phone has not been in use at the time and has been locked screen.
Any help would be greatly appreciated.

Synced photos can only be deleted by syncing again with iTunes and deselecting all synced items.
See: iTunes: Syncing photos

My iphone is broken and i am getting a new one sent out. How do i get everything from my old phone copied to the new one so its exactly the same??

My iphone is broken and i am getting a new one sent out. How do i get everything from my old phone copied to the new one so its exactly the same??

As long as they are already ticked in your iTunes then yes. Just to check do a sync and as long as everything stays the same you are good to go.

I have about 800 more songs on my nano than itunes, due to a crash. How can I get the songs onto itunes from the ipod, or at least get the new music ive gotten since the crash onto my ipod without deleting all the other songs when it syncs?

i have about 800 more songs on my nano than itunes, due to a crash. How can I get the songs onto itunes from the ipod, or at least get the new music ive gotten since the crash onto my ipod without deleting all the other songs when it syncs?

It has always been very basic to always maintain a backup copy of your computer for just such an occasion. Use your backup copy to put everything back.
If you have failed to bakup, then you can transfer itunes purchases from an ipod: File>Transfer Purchases

I use migrate assistant to move files from my old pc to the new Mac , but it creates the user account. How can i delete the unwanted user account.

i use migrate assistant to move files from my old pc to the new Mac , but it creates the user account. How can i delete the unwanted user account.

Welcome to Apple Support Communities
That's the classic behaviour after using Migration Assistant and that's normal.
To transfer the data from the new user account to your old user account, you can follow some steps. Here is all the information you need to do this > https://discussions.apple.com/docs/DOC-5472

Hi...i bought the new iphone 4 and would like to ask how can i transfer all my data from my old iphone to the new one? If I will do "synchronization" through itunes with the old phone and the plug in the new one will that be the case?

Hi...i bought the new iphone 4 and would like to ask how can i transfer all my data from my old iphone to the new one? If I will do "synchronization" through itunes with the old phone and the plug in the new one will that be the case?

Follow the instructions in this article to transfer your info: iPhone: Transferring information from your current iPhone to a new iPhone

My old hard drive crashed and had to get it replaced. How do I reinstall my old library to the new hard rive from my iphone4s so I don't lose my music?

My old hard drive crashed and had to get it replaced. How do I reinstall my old library to the new hard drive from my iphone4s so I don't lose my music?

Officially you don't. Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred to a computer.
Note: The information below hasn't been updated since early 2013.
Some of the information below has subsequently appeared in a document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
- Expod (free) - http://www.headlightsoft.com/expod/ - Mac, universal for 104.+ (newer machines try de-Tune)
- deTune (free) - http://www.headlightsoft.com/detune/ - Mac, 10.5+
- Senuti - http://www.fadingred.com/senuti/
- Phoneview - http://www.ecamm.com/mac/phoneview/
- MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/
- Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
- Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
- iexplorer (free) - http://www.macroplant.com/iexplorer/ - Mac&PC
- Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
- 2010 Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.

How can I transfer music from my old iphone 4 to the new iphone 5S without having the music synced to my laptop (e.g. my itunes library is empty)?

How can I transfer music from my old iphone 4 to the new iphone 5S without having the music on the old phone synced to my laptop (e.g. my itunes library on the laptop is empty) ?
I tried the "Transfer Purchases" option - however this only worked for apps - not sure if I'm missing some sort of setting.
I do not want to use iCloud as I do not have enough space for my music.
Thanks!

You cannot. The music must be in the iTunes library first. See these User Tips:
Recover your iTunes library from your iPod or iOS device
Syncing to a "New" Computer or replacing a "crashed" Hard Drive

I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. going again?

I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. up and going again?

Niel...
I installed Leopard 10.5.6 and then it upgraded to 10.5.8, when I installed it I had the old info saved to a "previous systems" folder, where most of my artwork, etc. were saved, I have a one terabyte Lacie backup that unfortunately did not work as it was intended...it saved the new info and not the old. I did look into the system preferences folder and found the classic file, of course it wouldn't launch...but I have the old G 5 startup discs and will try to do it as you stated. I will try also to move it out of the previous folders file to my hard drive and see how that works.
thank you for your time and help,
Dennis

How do i change the user on the new health app?

How do I change the user on the new health app?

alsastud wrote:
How do I delete the old User and create my own name and settings?
Really, the best way is to "fool" the system into thinking this is a first run system. To do this, you need to do the following
First, boot into single-user mode by powering the system while holding the cmd-S key combination down. This should bring you eventually to a black screen with a Unix terminal display. Type the following three commands (that period before AppleSetupDone is very important):
/sbin/mount -uw / <cr>
rm /var/db/.AppleSetupDone <cr>
shutdown -r now <cr>
What should happen is that when the machine reboots after the last command, you should get a "Welcome to MacOS" routine which will ask you for user information and set up your new account using that information.
After you get that done, you should, one way or another, be able to delete the folder of the old user in the Users folder, though you may need some help with that as well.

How to stop the new health application from Count the steps/ woking background?

Similar Messages

Maybe you are looking for