How to swap brightness button

I'm using Acer 4736 Laptop with Intel GMA 4500 MHD card. I got problem with brightness control.
The default brightness keyboard control is
+Fn + LeftArrow: brightness down
+Fn + RightArrow: brightness up
after installed arch linux, it working opposite
+Fn + LeftArrow: brightness up
+Fn + RightArrow: brightness down
then after turn off the laptop, the brightness screen will be darkest, when I boot it, I got a black screen then I must re-press brightness keyboard control again and again.
How can I swap this?
I use showkey command then I got
keycode 224 #when I press Fn + LeftArrow
keycode 225 #when I press Fn + RightArrow
I've tried make it remap through .Xmodmap but it's not work.
I found /usr/include/X11/XF86keysym.h
/* Backlight controls. */
#define XF86XK_MonBrightnessUp 0x1008FF02 /* Monitor/panel brightness */
#define XF86XK_MonBrightnessDown 0x1008FF03 /* Monitor/panel brightness */
#define XF86XK_KbdLightOnOff 0x1008FF04 /* Keyboards may be lit */
#define XF86XK_KbdBrightnessUp 0x1008FF05 /* Keyboards may be lit */
#define XF86XK_KbdBrightnessDown 0x1008FF06 /* Keyboards may be lit */
I've changed it step by step but it's still not working.
How can I swap these button to control the brightness?

Bump. I'd like to know the same.

Similar Messages

On/off Button and brightness buttons don't work in the Apple Cinema Display

I write you because I bought a new apple cinema display 20" a month ago and I have problems with the on and off button and the brightness buttons. Thew work sometimes. I think that te problem is windows XP but I am not sure. My graphics card is a ATI RADEON X800 GT Gecube 256 Mb DDR2.
Would yo mind telling me how can repair that? If I need something to repair o it is better to buy the new windows to avoid that problem.
Windows XP Pro ATI Radeon X800GT Gecube 256 Mb DDR2

Thank you very much. I didn't know this driver.
But the problem was when I was installing this driver, Windows said that it's imcompatible with windows XP.Is this normal? o I need to download a special edition for windows xp.

Keyboard Brightness Buttons Not Working

I have a macbookpro. I noticed recently that the keyboard brightness buttons (up and down) were not working. When I push either one of them the brightness image comes up with a small circle with a line through it (as in like no smoking)? I can change the brightness setting in System Preferences / Display. Any ideas why this situation would occur and how to change it so that I can use the keyboard controls? It is inconvenient not to be able to adjust the brightness from the keyboard. Thank you in advance for your assistance. MACarmel.

Use your left thumb to cover the iSight camera lens in the top of your display bezel. This will also cover the ambient light sensor that is 5mm to the left of the camera. With the sensor covered, can you adjust the brightness of your keyboard using the F5 and F6 keys? If so, the problem is simply that the ambient light level in your room is higher than the threshold at which the keyboard backlighting is turned off automatically. Your MBP thinks you don't need the backlighting on.
You can override the automatic backlighting control by using Lab Tick.

I accidetally hit the brightness button -Question about Auto brightness....

I leave my display settings on "Automatically adjust screen as ambient light changes" which works in conjunction with the keyboard illumination.
My question is, I accidentally hit the "Brightness Decrease" button often, the button directly above the ONE key. I was wondering,... How does that affect the automatic features?
I noticed that the brightness never seems to go above about half way on the meter in the displays control panel, Do I have to adjust the brightness to full intensity to give the display more "Automatic" Range?
It seems as if since I hit the decrease button, no matter how bright or dim a room is, the display never goes about the half-way mark.
I know this is a weird question, but I really apprciate your opionon / information relating to this,
-Rob

(I do not know all that much on this topic, but) I believe that when you hit the brightness button, the automatic adjustment turns off. To reactivate it, you can restart your computer (obviously), or, I noticed that the automatic kicks back in when you unplug/plugin your computer.
That's about all I know.
I can experiment with more things if you want, just let me know. And I was curious, how do you keep accidentily hitting the brightness button?
Peace
Bweb

Brightness buttons not working in Windows 10

Hi I have an HP 255 G3 Notebook running Windows 10 64-bit. The brightness buttons (f2 and f3) are not working for brightness adjustments. Nothing happens when the buttons are pressed. The othe buttons are working fine (for example volume adjustment f7 and f8). Any ideas on how I can make the buttons work? Kind regards Joey

I have an AMD lap top and AMD'S latest graphics driver disables the brightness keys for some reason so i went to device manager (windows button + X ------> Display Adapter-------> click on grapics card------> driver tab------> update driver)after i did that windows searched for driver and updated and right after that the brightness keys worked! Hope this helps!

Faulty brightness buttons and heat issue

The brightness buttons on my iBook no longer work
I did drop it a while back and broke the ethernet port, could that have caused it (probably did thinking about it)?
Also, it gets hot quickly and the fan comes on after about ten minutes of 'normal' use. Any tips on this?

What is the MHz rating of your iBook?
900
What kind of optical drive does it have?
CD write, DVD read only
What version of the OS is it running?
10.4.8
How big is the hard drive and how much space remains
available on it?
40gb capacity, 11.5gb free
How much RAM is installed?
640
Have you tried resetting the PMU?
Yes

How can I rename buttons in dialog popup ?

Hello.
I want rename buttons "OK", "Cancel" with my names in popups.
I create new values in domen WDR_POPUP_BUTTON_KIND
Next enhance interface IF_WD_WINDOW with new attributes:
CO_BUTTON_CP type WDR_POPUP_BUTTON_KIND
But i have problem in CL_WDR_INTERNAL_WINDOW->IF_WD_WINDOW~SET_BUTTON_KIND:
case me->buttons-button_kind.
    when co_buttons_abortretryignore.
      wa_button-button      = co_button_abort.
      wa_button-button_text = cl_wdr_texts=>get_text( '201' ).
      wa_button-tooltip     = cl_wdr_texts=>get_text( '201' ).
      wa_button-is_enabled = abap_true.
This code show only predefined type of buttons can use.
How can I rename buttons in dialog popup ?

When you subscribe to button event you can rename the button
* Popup
DATA lo_window_manager TYPE REF TO if_wd_window_manager.
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_window         TYPE REF TO if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
lo_window         = lo_window_manager->create_window(
    window_name          = 'W_POPUP'
    message_display_mode = if_wd_window=>co_msg_display_mode_selected
    button_kind          = if_wd_window=>co_buttons_ok
    message_type         = if_wd_window=>co_msg_type_none
    default_button       = if_wd_window=>co_button_ok
DATA: l_api TYPE REF TO if_wd_view_controller.
l_api = wd_this->wd_get_api( ).
" subscribe to button event
lo_window->subscribe_to_button_event(
               button            = if_wd_window=>co_button_ok
               BUTTON_TEXT       = u2018Approveu2019 " renaming the button text
               action_name       = 'ON_OK_POPUP'
               action_view       = l_api
               is_default_button = abap_true ).
lo_window->open( ).
Radhika

How can i use Button in BEx 7.0

Dear Folks,
Could you help me please ..
In BI 7.0, for BEx analyzer i see we can use button, combo box, analysis grid.
If i have a requirement like this:
1. I have sales report, where it has information about sales person.
2. And i want to filter that report with the sales person that i choose from combo box.
For that requirement, i tried to :
1. I Create a query to Sales info-provider for displaying sales.
2. I Create a query to either to MD Sales person / Sales info-provider in order to get Sales persons data.
3. I assign point no 1 to Analysis Grid.
4. I assign point no 2 to Combo box.
My questions are:
a. Is my techniques correct ??
b. How can i use button to execute filter into the corresponding report ???
c. Is there any tutorial regarding this ?? Could you share it to me please ..
Really need your guidances..
regards,
Niel..

Hi Niel,
You can use the method you specified.
In Bex Analyzer you have design mode where you can have the following items Button, Analysis Grid and Combo box.
To work with the button you need to use the Command Wizard which consists of pre-defined functions, out of those select the one which suits your requirement and supply the parameters. As it is done thorugh a Wizard it would be easy to do.
Also,
The Button Name displays the name of the button, which is generated automatically and is unique. This name is used on the BEx Analyzer Design Toolbar menu to refer to a particular instance of the button.
· Range u2013 Manipulate coordinates for a cell or cells in this field to move or resize the button.
· Button Text - The text (caption) you want to display on the button. You can use this to describe the command the button executes.
· Command Range (optional) - Specify a three-column range of cells in the worksheet that contains command parameters. In these cells, you provide the same parameters (Name, Index, and Value) as in the Static Parameters, but in the worksheet these can be variable, changing during
navigation based on query results or on a value you manually specify.
Button in Bex analyzer
Regards,
Neelesh Jain.

How to remove the buttons in ALV GUI?

Hi All,
I am using the FM REUSE_ALV_GRID_DISPLAY for disaplying the ALV grid. i need how to remove these buttons ( mail word processing, loal file, Mail recipient, ABC analysis, Microsoft Execl and Graphics ) from the ALV Gui?
please give solution.
Regards,
Santha

hi,
IT_EXCLUDING TYPE SLIS_T_EXTAB OPTIONAL
you need to append the Fucntion codes to the it_exclude and then pass it to the parameter it_excluding.
append '&ABC' to it_excluding.
append '&BAC' to it_excluding.
call function 'REUSE_ALV_GRID_DISPLAY'
IT_EXCLUDING = it_exlcuding
Regards
Anver

How to handle Back button in IA06 BDC

Hi all,
I am calling IA06 inspection screen for an task list operation using BDC from my custom program. on this screen user can change the SAP data. if I save the task list then it's working fine.
But I have one issue how to control back button, when user make any changes on this screen and click on back button because it calls all the previous screens which i skipped using BDC.
Or for this particular functionality there is any Function module same as for Characterstics as "CLFM_OBJECT_CLASSIFICATION"
Please advice.
Thanks,
Sanket Sethi

Hi all,
Please suggest if there is any function module/ API to call Task list characteristic screen directly; same as for Task list classification screen using Function module CLAF_CLASSIFICATION_OF_OBJECTS.
Thanks,
Sanket Sethi

How to use one button rollover symbol to create 100 graphically different buttons

I do know how to create a button rollover symbol.
I don't know how to make that button rollover symbol reuseable. I'd like to put 100 different images in 100 copies of the button. I'd rather not make new symbols for every button, since the rollover animation may change.
Symbol "Accessibility" allows the title to be changed for copies of the symbol. Does similar functionality exist for bitmaps used in the symbol?
Could the copied button bring in new graphics from the timeline in another symbol or a xml sheet?
Any help would be greatly appreciated. I've been following tutorials, except none of them cover this situation.
Thanks for your help!

Created in EA version 3:
I have 2 samples for you that are very similar.
1- uses the symbol with no image and loads the image as a background-image for the div.
https://app.box.com/s/co7uki3fm3b11a3o1xjw
2- uses an image in the symbol and replaces this image with a new one in the img (not div)
https://app.box.com/s/3ms92f5cv0mylspsi5uo
Choose what you prefer.
3. An example with more elements in the symbol directly on the stage instead of a container. use a container if you want to place the symbols in a specific rectangle div for example.
https://app.box.com/s/y92bpo82kncxnn2w567y

Is it possible to create a single texbox? and how to delete a button on a form? please asap, badly n

Is it possible to create a single texbox? and how to delete a button on a form? please asap, badly needed it right now. thx -regards gustavo

Hello Gustavo,
You can create a single textbox using the textbox option here (This is for you to enter text - not for the visitor): http://jingsite.businesscatalyst.com/jing/2013-09-30_2212.png
If you want to create a textbox for the visitors to enter text, then you need to enter a form, and you can delete the "message" field from the "simple contact" form, but not the name and the email fields (those are mandatory and can't be deleted).
You may want to check external forms in case you want to have the form rather customized, to check if you can have forms with single textbox. An example would be "Jotform".
Hope this helps.
Cheers
Parikshit

How to swap fields in screen painter.

hello gurus,,
how to swap fields in screen painter.

Hi
Go through the link given below :
http://www.standardware.com/pdf/stdwsp.pdf
With Regards
Nikunj Shah

How to create SAVE button in Workbook using BI IP Functionality

Hi All,
I have Real-time Infocube (ZCUBSDID) with me. Planning has been done on the cube using BI-IP (like Aggregation level, filter, planning function and planning sequence are present there).
As an Input i have everything in Quality system like I can access query in Bex Anlyzer (Input Ready Query) and also i have workbook associated with the query. SAVE button is also present on workbook which is giving result based on fiscal year and version.
Now my task is to create workbook on Development system with the same functionality as Quality System.
I have same Query available on DEV system also. I created new Workbook but SAVE button is not available in my workbook.
Can anyone suggest how to create SAVE button in my new workbook.
I am new in IP side so please let me know if i can get any help from workbook which is already present in Quality system.
Which type of analysis i should do to come out with solution.....otherwise let me know step by step procedure to create SAVE button on workbook using BI-IP functionality.
It will be great help. My advance thanks goes to you people.
Thanks,
Rupali Singh

Check points 19 & 20 on this link http://help.sap.com/saphelp_nw2004s/helpdata/en/43/a033e0f56e21b5e10000000a1553f6/frameset.htm.
Command to be called on SAVE button is SAVE_AREA as explained in the point 20.
Regards,
Deepti

How can i make buttons in an article to go for other articles in Folios Builders for Ipad?

I am trying to make buttons in an index, for goingo to other articles, but they never worked here. When a i put Go to Destination, and choose de Indd file, it does not work.
Can i make a scrollable frame a button either? When i tryed, it did not work, not even the button, and the scrollable frame.
Please, need some help here.

WHat is navto? is navegate to...? How can i do this?
thanks a lot for your attenttiosn.
Em 29 jan 2014 às 06:26, Bob Levine <[email protected]> escreveu:
Re: How can i make buttons in an article to go for other articles in Folios Builders for Ipad?
created by Bob Levine in Digital Publishing Suite - View the full discussion
Go to destination is unsupported in DPS. You should be using go to url with a navto: command.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6064623#6064623
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6064623#6064623
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6064623#6064623. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Digital Publishing Suite at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How to swap brightness button

Similar Messages

Maybe you are looking for