How to switch to SOA related job

Hi All,
Im presently working as a Solaris admin (2+yrs). But over period of time my interest in system administration has receded. I now wish to start afresh in SOA (integration or architect). Could you please throw some light on starting up with SOA?
I have a bachelor's in IT but do not have hands on experience in programming. Is programming experience necessary to start preparing for SOA architect role?
Please clarify.
Thanks!!

Hi Grieff
1. Anytime you create a SOA/BPM Domain using the config wizard (or any other mode), in one of the initial screens, you give the details for the backend RCU Database that has pre-run all RCU Schemas like SOA_INFRA, MDS, ORASDPM etc etc. For each of these schemas, there is a JDBC Datasource associated that basically stores the connection pool details like db host, port, sid, username, password.
2. NOW all these datasources are stored as .xml file under your DomainRootFolder/config/jdbc. Look for *.xml files and open each file and you will get an idea. Take a backup of full jdbc folder. STOP all the servers, admin, soa and bam. Edit each .xlm fle and carefully, change the db host, port, sid, and most important the each schema name. Like for DB1, if you gave DEV1_SOAINFRA and for DB2 if you had DEV2_SOAINFRA, just use the appropriate schema name. The point is the DB which you point your SOA Domain should have those xxx_SOAINFRA schemas etc. So just edit all these .xml files. You can give plain text password. I think they get encrypted.
3. If you configured any other datasources other than RCU like RDBMS Security policy etc (mostly people will not do this), change those settings also.
Start all the 3 servers. Go to weblogic console and check each Datasource and make sure it points to right db you want.
NOTE: You can change datasources from Weblogic Console also. For each datasource, go to connection pool, do lock and edit and change values and Save. Do this for all datasources. Then RESTART the servers. this is little bit tedious and confusing also. So I personally prefer the first approach.
Thanks
Ravi Jegga

Similar Messages

  • How to identify the related job, after sheduling a infopackage?

    Hi,
       Anybody explain that how to identify the related job after scheduling a infopackage in the BW system?

    Hi Aditya,
    Goto SM37->Search Job BI_BTCH*
    Job Prefix.
    http://help.sap.com/saphelp_nw70ehp1core/helpdata/en/da/0318025d64a84b94542641ed77ee74/content.htm
    Hope it helps.
    Thanks and Regards,
    MuraliManohar.
    Edited by: Muralimano on Jun 5, 2011 9:38 AM

  • How to make site root-relative links work in DW and Server both?

    See details on buggy DW image link behavior, below. My question is:
    1) how to make site root-relative links work in DW and Server both? Or…
    2) how to reliably automate the change of several hundred legacy root-relative links of the form
    /images/image.jpg  to document-relative?
    That is, to
    ../images/image.jpg or
    ../../images/image.jpg or
    ../../../images/image.jpg etc…depending on where the directory is.
    The old format (/images/image.jpg ) used to work fine in my previous DW 8 configuration but appear grey in DW after “upgrading” to DW cs5.5 mac. (they look fine on the server, but it’s hard to edit image-heavy pages locally when they are all grey).
    I tried changing the files to how DW creates root relative links now:
    /public_html/images/image.jpg, which is a very easy, attractive root flow since there’s a one-to-one mapping. These look great in DW but are broken on the server!
    I looked at the “advanced” site setup, and it looked like it might be possible to nuke the /public_html/ part of my server info…but it also looked like there was the potential for doing damage changing these settings, which are automatically generated from our server connection settings, which seem to work.
    The “links relative to document/ site root” toggle…does that change how DW interprets existing links, or just change the default when you are adding a link?  I have made 80% of the file links document relative…before wondering if root-relative isn’t better?
    It sure seems less ambiguous for all those images if theres a way to make root relative work for DW design view, DW link check, and server.
    Summary of buggy behavior: (see test with images here)
    "old style" site root link
          /images/img_book/WScover120x150_NEW.jpg
          Design veiw in DW: broken (grey w/ broken icon)
          Link check in DW: "external link" (i.e., uncheckable, + file could appear orphaned)
          Browser: good
          Ease of switching: n/a (existing format)
    "new style" site root relative link
          /public_html/images/img_book/WScover120x150_NEW.jpg
          Design veiw in DW: good
          Link check in DW: good
          Browser: broken
          Ease of switching: easy
    Document relative link
          ../../images/img_book/WScover120x150_NEW.jpg
          Design veiw in DW: good
          Link check in DW: good
          Browser: good
          Ease of switching: hard (how to automate?)
    Absolute link
          http://www.oasisdesign.net/images/img_book/WScover120x150_NEW.jpg
          Design veiw in DW: broken (grey w/ broken icon)
          Link check in DW: external (i.e., uncheckable, + file could appear orphaned)
          Browser: good
          Ease of switching: n/a...not a real option
    Thanks!
    Similar discussion on "/"

    Hello again Jon!
    Thanks for jumping on this.
    All clear and understood about where publc_html is etc.
    No contemplation of nuking the actual public_html directory on the server, just the "/public_html" text string at the start of the DW-generated links.
    "/public_html" is automatically added to the front of the link in DW if I create the link with any of the GUI tools, if I have "site root relative" selected. And ""/public_html" ends up in the code, and gets uploaded that way to the server, where it (obviously) doesn't work.
    Doesn't sound like it is supposed to work this way. Also, what seems to be the usual root relative format (/images/image.jpg) shows as a broken link in the GUI and an external link in the DW link check. All this togther makes me thinkI have some obscure setting incorrect?
    The setting that caught my eye is manage sites/ site setup/ advance settings/ local info/ web url,  which is automatically set to http://www.oasisdesign.net/public_html/
    it gives an option to change it but it makes every effort to make this NOT look like something users should mess with:
    Having gone through the more careful thought process during this post, I'm ready to do the experiment of changing the remote server web URL (why is it wrong by default?)...think I'll eat dinner first so there's 45 min to avert disaster if anyone knows this to be a bad idea!
    Art
    PS--don't  have a local testing server...don't think this will solve the GUI broken link/ link shows as external problems.
    Is there an easy, automated way to change links sitewide from document to root relative?

  • How do I resolve this related Ical message? The server responded with "400" to operation CalDAVUploadDropBoxFileQueueableOperation.

    How do I resolve this related Ical message? The server responded with “400” to operation CalDAVUploadDropBoxFileQueueableOperation.

    I am having this problem too...and also I (most of the time) can't invite anyone on my google apps domain to a meeting. WEIRD! HELP!!! I just switched to Mac from PC...this was supposed to be EASY!
    I get all kinds of error  messages...
    1) The request for “Test Appointment” in “[email protected]” in account “yyyy.com Google” failed.  The server responded with “400” to operation CalDAVScheduleEventQueueableOperation. *My google calendar *IS* updated despite the error, but the appointment is greyed out on my calendar.
    2)  The URL https://calendar.google.com/calendar/dav/[email protected]/user///calendar.google.com/calendar/dav/[email protected]/user/ encountered HTTP error 404. Make sure the URL is correct. The URL *IS* correct.
    Also, when I try to invite people to appointments, iCal adds random attendees and frequently will not add an attendee if they are in my domain. HELP.

  • Are there good number of XI related jobs in market ?

    Are there good number of XI related jobs in market ?
    How is Xi doing in market?
    Does XI certification has a good recognition in market?

    Hi
    SAP-XI is a middleware.It is an Integration platform and Technology just like any other EAI(Enterprise Application Integration).For example TIBCO is a competitor for XI.
    A knowledge of both Java and ABAP is required for SAP-XI.
    Prospects of XI
    Check out this Blog:
    /people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i
    Thanks

  • BW Related Jobs in ECC during upgrade

    Hi,
    we are upgrading from ECC 5 to ECC6.
    During upgrade, how should we handle the BW related jobs in ECC.
    How do we get the list of BW related jobs that are running in ECC
    How are these Jobs created in ECC ?
    Thanks
    Rekha

    Hi Rekha,
    You can check the job in SM37. check with options scheduled and released checked.
    Usually we will find jobs related to V3 scheduled in LBWE in SM37.
    take immediate run for that job and cancel it.
    now run your delta IP's to load the records from delta queue to BI system.
    Regards,
    Venkatesh

  • How to Switch from Palm Tungsten e to Tungsten T3

    Sorry if this is not posted in the correct subject area, but it is sort of "Sync" related.
    The touch screen on my old Tungsten/e has been gradually failing. Last month I managed to pick up a new (still boxed and sealed) Tungsten T3 at a garage sale for $1. Unfortunately I could not find any info here on how to switch my data/info/software over to another device. I am currently using Version 4.1.2 of Palm Desktop with my Tungsten/e. I did find postings related to the fact that you need 3rd party software to sync more than one device. I don't need to do that per se, I only need to be able to use the new unit. I just don't know how to get my existing stuff on it.
    Any help would be appreciated (hoping there are still some other "Legacy" users out there)
    Thanks in advance, Dave

    I should add I read the 'Transferring data from a Zire 32 to Tungsten E' post and followed the links provided. However in all situations covered therein, Palm states 'even if you have an earlier version of Palm Desktop you must install from the CD provided with your new device as it may contain features that were not previously available'.
    Since I have a version of Palm Desktop that post dates the CD by several years/versions, I'm not sure how to proceed.
    If I remember correctly the T3 isn't really newer than the e it was a concurrent more expensive model that has voice recording, bluetooth and a slide out widescreen.  

  • How to switch off automatic creation of the business partner?

    Hello!
    Advise please why in erp after creation of the customer automatically form business partner? How to switch off automatic creation of the business partner? It very much disturbs, because business partner are created from crm. Because of automatic creation business partners are duplicated.

    Hi,
    I have made the following customizing settings to activate customer integration with business partner, but the problem is when I create a BP with a role (FI-Customer) the customer is not created automatically.
    1. Set BP Role Category for Direction BP to Customer
    Roles: FLCU00 - Business Partner FI Customer (FS: BP)
    FLCU01 - Business Partner Customer (FS: BP)
    2. Defined the Number assignment for Direction BP to customer
    4. Customer account group and numbering is also defined.
    3. Created a BP with BP Role FLCU00, I can see the Customer - General Data tab, but no customer was automatically generated by the system.
    Kindly let me know if any customizing I have missed.
    Regards
    Ameya

  • How do you split the print job across multiple printers to shorten the prin

    i
    Can any one you provide some information on below questions.
    Check printing by XML template (XML Publisher).
    1. When printing checks, how do you print the checks from one printer tray and the overflow remittance pages from another printer tray?
    2. When printing a large batch of checks using XML and PDF output, how do you split the print job across multiple printers to shorten the print time?
    I appreciate if you could give some information on above 2 questions.
    Regards,
    Ramarao.

    Probably sould just do them individually.
    How to get all the iWork apps, iPhoto, and iMovie for free on an eligible iPhone or iPad
    http://www.imore.com/how-get-all-iwork-apps-iphoto-and-imovie-free-eligible-ipho ne-or-ipad
    About Free Apple Apps for iOS 7 compatible devices
    http://support.apple.com/kb/HT5913
     Cheers, Tom

  • How can I watch movies in germany with native tone, english? Any one knows how to switch the language when renting a movie?

    How can I watch movies in germany with native tone, english? Any one knows how to switch the language when renting a movie?

    I wonder the Format Tables macros on my site could be adapted?
    http://www.grainge.org/pages/authoring/word/word_macros.htm
    If not, I have used Macro Express to format tables in Rh. No reason it could not be used in Word.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • How to switch between messages in the BlackBerry Hub

    With the release of BlackBerry 10 version 10.1, we’ve added a new gesture to the BlackBerry Hub that allows you to quickly switch between your next and previous messages. It’s simple: while viewing a message drag your finger from the left to the right and in one continuous motion swipe up or down.
    For example, in the following screenshot you’ll notice I am viewing ‘Test 08”. To get to the next message, “Test 09”, all I need to do is swipe from left to right (red arrow) followed by swiping up (green arrow) in a single motion. To switch to the previous message, “Test 07”, I complete the same gesture, but swipe down instead (blue arrow).
    Tip: Using a BlackBerry Q10 or Q5? On top of using this gesture to switch between messages, you also have the option of pressing the N key to view your next message, or the P key to view a previous message.
    If this gesture doesn’t appear to be working on your device, verify you are using BlackBerry 10.1.0.4181 or later by going to Settings > About and reviewing the OS Version field. If the OS Version is lower than 10.1.0.4181, check for updates by going to Settings > Software Updates.
    For more details about the availability of BlackBerry 10.1, check out Inside BlackBerry’s post on BlackBerry 10 Software Updates.
    VIA | helpblog.blackberry.com
    http://helpblog.blackberry.com/2013/10/how-to-switch-between-messages-in-the-blackberry-hub/
    Please thank those who help you by clicking the button.
    If your issue has been solved, please resolve it by marking "Accept as Solution"

    I would set up a variable before you get to that node, lets call it $EmpID and assign to it the value of the prompt you want to play lets say 12345 which would be the library promptID. It will then play prompt, get digits, and once you validate if it goes through the expression that flags it as invalid, in that node re-declare the variable, but this time give it the value of the new prompt you want to play, then sent it back to the node which will then play the new prompt and collect the digits.

  • How to switch off screen while playing songs in 5G iPod

    Any ideas how to switch off the screen completely (not just reducing the brightness) while playing the songs.
    i'm thinking that this could improve the battery life !!!
    30GB Video iPod   Windows XP Pro  

    No you can not do this; you can only turn off the Backlight.

  • Error while changing the physical IP address of SOA related datasource

    Hello Everyone!!!
    I am facing a problem while changing the ip address of my SOA related datasource in weblogic 10.3,Below is a brief description about my prb:
    I have created a domain in weblogic 10.3 and have configured a datasource to it and its working fine initially.
    But i had to change the ip address of my datasource(i.e Edit the existing the setting of my domain) as my database was migrated to another m/c.The changes that i did was,I changed the url in the connectionpool tab of each of the datasource's listed in admin console(Please let me know if i have left out any other important place in which i had to make this change).
    After making this change my ManagedServer starts but my Enterprise Application named soa-infra doesnt start and when i checked the log to find out the error,this is what i came across:
    B2B-50025: Repository error: Error -: B2B-51572: Error reading input stream.: java.io.IOException: Stream closed
         at oracle.tip.b2b.init.Repository.initExchange(Repository.java:658)
         at oracle.tip.b2b.init.Repository.initialize(Repository.java:764)
         at oracle.tip.b2b.init.B2BServer.readRepository(B2BServer.java:509)
         at oracle.tip.b2b.init.B2BServer.initialize(B2BServer.java:212)
         at oracle.tip.b2b.engine.ThreadWorkExecutor.startB2B(ThreadWorkExecutor.java:345)
         at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:203)
         at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
         at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
         at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
    Caused by: Error -: B2B-51572: Error reading input stream.: java.io.IOException: Stream closed
    Any suggestion would be of great help.
    Thks in advance!!!

    Hey thks for the reply,
    We were able to solve the problem by just restarting our database,
    i got some reference from the below link(pls refer to this topic:Changing the IP Address of a Metadata Repository Installation):
    [http://download.oracle.com/docs/cd/E12839_01/core.1111/e10105/host.htm#CHDHAEFE]
    but m still confused do i have to restart my database server each time i change the DB server that m pointing to in my weblogic console and if yes can you pls help me understand what change happens when the database restarts that makes this work.
    Another issue that m facing now is that after solving the above prb(by restarting the DB) m not able to deploy process's on to my server.
    The Exception that appears in the log file is as follows:
    [2011-02-08T13:03:33.220+05:30] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.compiler] [tid: [ACTIVE].ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000Is4C5SLBLA1LzuP5iW1DKEXf000d33,0] [APP: soa-infra] [dcid: d61ccdb1526887f2:678e40b9:12e040e4cba:-7ffd-000000000000290f] <BPEL1Processor::generateProcessClass> MerchantSales_BPELProcess.bpel(line 228): invalid query[[
    query "/EmailPayload/ns3:FromAccountName" is invalid, because java.lang.IllegalArgumentException: null schema location for ns=http://xmlns.oracle.com/ias/pcbpel/NotificationService [Cause=null schema location for ns=http://xmlns.oracle.com/ias/pcbpel/NotificationService]
    Check the XML schema and make sure your query string is valid
    [2011-02-08T13:03:33.448+05:30] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.deployment] [tid: [ACTIVE].ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000Is4C5SLBLA1LzuP5iW1DKEXf000d33,0] [APP: soa-infra] [dcid: d61ccdb1526887f2:678e40b9:12e040e4cba:-7ffd-000000000000290f] <CubeProcessLoader::create> [[
    java.lang.Exception: BPEL compilation failed
         at com.collaxa.cube.lang.compiler.BPEL1Processor.generateProcessClass(BPEL1Processor.java:529)
         at com.collaxa.cube.lang.compiler.BPEL1Processor.loadProcess(BPEL1Processor.java:495)
         at com.collaxa.cube.lang.compiler.BPEL1Processor.loadProcess(BPEL1Processor.java:438)
         at com.collaxa.cube.lang.compiler.BPEL1Processor.createCubeProcess(BPEL1Processor.java:396)
         at com.collaxa.cube.engine.deployment.CubeProcessFactory.create(CubeProcessFactory.java:61)
         at com.collaxa.cube.engine.deployment.CubeProcessLoader.create(CubeProcessLoader.java:112)
         at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:238)
         at com.collaxa.cube.engine.deployment.DeploymentManager.deployComponent(DeploymentManager.java:182)
         at com.collaxa.cube.ejb.impl.CubeServerManagerBean._deployOrLoadComponent(CubeServerManagerBean.java:726)
         at com.collaxa.cube.ejb.impl.CubeServerManagerBean.deployComponent(CubeServerManagerBean.java:114)
         at com.collaxa.cube.ejb.impl.bpel.BPELServerManagerBean.deployComponent(BPELServerManagerBean.java:85)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)

  • HT201209 Please help, tried to redeem an App Store gift card for $15.00.  It worked when I put it in earlier but I was still charging purchases to my credit card.  I did not see how to switch over to the gift card.  Credit is gone and code now invalid.  W

    I need help with redeeming a $15 App Store certificate.  I tried to redeem earlier in the day and it was credited to my account.  I could not figure out how to switch payment from my credit card to the gift card credit.  Later on in the day I see the credit is completely gone and now the card is invalid.  Nothing was purchased with the gift card so I want to know where the credit went.  I also have$5 credited to my Apple ID from a past gift card that I can't access.  What can I do.  Is there a customer service number???

    To Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • How do I cancel a print job from my computer to my HP Photosmart 7510. Touchscreen is unavailable.

    HP Photosmart 7510 All-in-One CQ877a Model C3112; Operating system Windows Vista 64-bit.
    Can't find how to easily cancel a print job. The touch screen is unavailable during the printing process (just shows the HP icon spinning around during the print process). There isn't a "cancel" button or touch area to cancel. We're wasting ink and paper by not being able to cancel jobs easily. Read the 24-page manual and it doesn't mention it. Looked on line for an answer, can't seem to locate one. Can always go to Start, Printers, and select the printer and then cancel from within there, but by then, the job is finished.

    There should be a cancel button (X) on the printer. Check out the pic below taken from page 7 of the User manual for your printer:
    http://goo.gl/mW7Fy
    Alternately, instead of going the Start button route, did you check out the Final tip at the bottom of the article?
    "Final Tip (Shortcut)
    Before using the method above to open the print queue, look for the printer icon in the notification area. If you see it, double-click it to bring up the print queue. "
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Maybe you are looking for