How to synchronise with two monitors

Dear NI,
I have an application, for that i want to show the two different screens with different mesurement values. i am using CRT and LCD screens. in CRT screens i am running main vi in this screens i have configuration, testsettings, trendmill,and operator name etc. are displayed, i need the seperate screens for to show measurement values to another screen. how , is it possible to do this? can able to two diferent exe with diferent monitors? and how to synchronise two monitors for my application.
Balaji DP
Application Engineer,
Gantner Instruments.
Labview 8.5 Version
Regards,
Balaji DP

Hi Balaji,
So if you have an extended desktop across two monitors then I would say you had two options.
1. Within one VI you could simple design the front panel in such a way that it extends across both screens with the relevant information in the right screen. The fact that there are two monitors present is transparent to the applications.
2. With two VIs there is a property for front panels to choose which monitor they are displayed on. This is available by wiring a VI reference to a property node and selecting front panel window >> monitor. You then enter an id for the monitor you want it to be displayed on, this is a numeric e.g. your primary monitor will be zero. You can see the property node help page here.
I hope this is the information you are after.
Regards,
James Mc
========
CLA and cRIO Fanatic
wiresmithtech.com/blog

Similar Messages

How can one use Mission Control with two monitors? Please bring Spaces back

How can one use Mission Control with two monitors. With Spaces I could treat each space as a single desktop.
SyBB

I use two monitors at work and have no issue. I have my mail set to use Desktop 1 and iTunes set to the second monitor of Desktop 1. I have browsers set to Desktop 2 and Fusion and RDC set to Desktop 3.
Two things that may help you. In System Preferences > Mission Control, disable the setting "Automatically rearrange spaces...". This screwed with assigning applications to certain spaces. And the other thing is don't use full screen on apps that support it. This just makes your second monitor superfluous.

How do I connect two monitors to my macbook pro?

How do I connect two monitors to my macbook pro? This question applies to both DVI and VGA, as I might have to work with multiple sets of monitors.

The MacBookPro only has enough horsepower in the video card for one external monitor.
If you want two or more, you need a MacPro.
Or a MacBook Pro and a Remote Desktop controlled MacMini.
http://www.apple.com/remotedesktop/

How do you connect two monitors to macmini

how do you connect two monitors to macmini

Hello, is this the latest Mini?
Video Card:
HD Graphics 4000
VRAM Type:
Integrated
Details:
This model has an Intel HD Graphics 4000 graphics processor that shares memory with the system. Also see: What type of video system is provided by the Aluminum Mac mini models? Which are integrated and which are dedicated? Can the video be upgraded?
Standard VRAM:
512 MB*
Maximum VRAM:
768 MB*
Details:
*With 4 GB of RAM installed, this model uses 512 MB of RAM for graphics. With additional RAM installed, more RAM is reserved for graphics use.
Display Support:
Dual Displays
Resolution Support:
1920x1200*
Details:
*This model simultaneously supports 1920x1200 on an HDMI display or a DVI display using the included HDMI-to-DVI adapter and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600*
Details:
*This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i5-2.5-late-2 012-specs.html

How to sync with two computers not at the same time, I'm registerd with one computer

How to sync with two computers (not at the same time), I'm registered with one computer and am trying to connect with second computer with same iPhone. To sync the first time with the second PC "Firefox Sync Option tells me Create New account or Connect, when I connect it gives me a Passcode and on iPhone it also gives me a Passcode, than how do I connect? Both the iPhone and PC gives me a Passcode and have now idea what to do with them.
Where do I find my Sync Key ? so I can install manually if it works ?

Use the Sync Key ''(Recovery Key)'' from the PC that you used to initially setup your Firefox Sync service, when setting up that 2nd PC with Sync. You need to use '''Add a device''' to setup the 2nd and subsequent devices on a Sync account. <br />
https://support.mozilla.com/en-US/kb/add-a-device-to-firefox-sync

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.
I saved a new workspace and it did not help.
No problem before I went to Maverick.

I found the fix, go to System Preferences and open Mission Control and uncheck the box to keep monitors as they were (When switching to an application...........)

Users with two monitors

Hi:
I have an application using either JInitiator 1.3.x or Sun Java Plug-In 1.4.2.x which works fine.
But I have several users with two monitors and if the user move the application to the secondary monitor the menu didn't work (using JInitiator or Sun JPI).
We are trying to move our iAS configuration to use only Sun JPI.
Is any solution for that behavior of the application when I have two monitors.
Abdel Miranda
Panama.

Has anyone tried to apply this patch to a middle-tier installation of just Forms and Reports Services, rather than a full Oracle AS installation? Do you know if this patch can be used in this way? The Readme is full of info about things like OID and Metadata Repositories which don't really apply to us.
I'm also worried (and unclear) about what databases are supported by this patch - in one place it says the minimum db version for patch 10.1.2.2 is DB 10g, whereas elsewhere it talks about only needing DB 9.2.0.7. (Neither of which is good for us, we're still on 9.2.0.6.) But then, for an install of just Forms and Reports Services, maybe I won't need to apply the database part of the patch..?
I'd be intererested if anyone else has patched a pure Forms and Reports install...
James

How can I use two monitors to increase workspace?

how can I use two monitors to increase workspace?

Drag the tabs of any After Effects windows you want to the second monitor.

How Can I use 2 Macs and a PC with two monitors

This is for my office at work.
I currently am using dual monitors and sharing those between a G4 and a PC. I'm using a Belkin switch box for the two computers. I'm adding a Mac Pro. I'm thinking I might use the Mac Pro by itself at another workstation but I would like to use it at my current workstation along with my other machines.
I'm getting a new 23" monitor with the Mac Pro. I want to use it as my main monitor, then use one of my other monitors as a second screen. Is it possible to use two monitors with 3 computers? I would have to use the new keyboard and mouse (both will be standard, not wireless) on both of the macs and use the PC keyboard and mouse.
Thank You
Jim

I would use the new Mac Pro as the main workstation and attach your mouse, keyboard and your new monitor to it.
Then use the Belkin Switch Box to connect 1 monitor to the G4 and PC.
Download and configure 'Synergy' (http://synergy2.sourceforge.net/) on the new Mac Pro (as the primary) and the G4 and PC (as secondary) - This will allow you to deal with only one keyboard and mouse.
I'm with Malcolm, I would download and install VMware Fusion. VM the PC w/ Converter (http://www.vmware.com/products/converter/) and only deal with the new Mac Pro and G4. With the new Mac Pro, you can fire up the PC VM with 2 cores and have it set to a secondary space. You will not notice the difference.

How can i use two monitors in my application?

Hello,
Background
I have a dual monitor card and two monitors which I want to use in my LabView application. The application gathers data from a complex sensor and calculates a number of results which need to be displayed graphically, this happens every 10 seconds or so. There is an awful lot of graphs which may be needed to be seen at some time but not routinely. The idea is that one monitor will display all the standard routinely displayed things and will not have any user input whilst the second monitor will display a tab control which has all the other graphs pickable.
Question
What I want to know is how I can programmatically tell labVIEW to put one vi up in one monitor and another vi in the other. I would then have them both maximised (which I know how to do). I would rather have the monitors set up as individual and that way I could keep the windows control bar on one monitor only. Thus one monitor would be a true user interface and the other simply a display.
Basically how do I tell LabVIEW to use one monitor for a specific vi and not the other.
The card I have is a matrox p650. Any comments would be appreciated.
Regards
Kevin

Hallo,
with new version of LV its more easy, but it also hasn't any troubles with LabVIEW 6.x or 7.x.
Especially with Matrox P650 you will get no any problems (we using
exactly this card together with G550 and our application supported
three monitors at the same time.).
I recommend to you following sequence:
- After installing driver turn on option for supporting different
resoluton on different monitors. As result you will get two absolutely
separate monitors.
- In Windows define which one is primary and which one is secondary.
(On primary monitor located taskbar and all messages dialog boxes will
appear.).
- Arrange secondary monitor in display properties - where he located (left from primary, or right)
- In your VI (which must appear on second monitor) use
FrontPanel.PanelBounds Property Node for positioning. You must set four
values for two corners. Easiest way to found right values is following:
read this property node in while loop and put indicator on front panel.
Then run VI, drag front panel onto second monitor and resize if
necessary, and then you will see right values for PanelBounds. You can
write this property node programmatically in run-time too.
hope it help,
good luck.

Folio 9470m notebook with two monitors

Hi all, I want to use my Folio 9740m notebook with 3 independent display (Built-in display and two external monitor HP L1750). I tried to connect direct to notebook and docking station but it's not working. Only two displays are working at same time. Is it possible to use with 3 display (Intel HD graphics 4000 can do that)? Thanks for your help. Greg

I've not been able to get 3 indpendent monitors running either. I suspect it may have to do with the high resolutions of thw two monitors. Has anyone tried using lower resolution settings for three monitors (didn't work for me)? On another note, using the single displayport only allows for a "stretched" desktop environment. In order to get two independent desktops we had to use one monitor on the displayport in the back of the docking station of the 9470m and use the 2nd monitor on the side displayport which is attached to the laptop itself. This allows you to run two indendent desktops on each of the two monitors without having to get that "Daisy chained" effect where your desktop is just stretched (i.e. when you maximize a window it stretches across both monitors).
The Folio only supports Dual Displayport 1.2 technology which only allows the daisy chain monitors and doesn't support multiple independent desktops, thus your only option is to get one big wide desktop if you connect multiple monitors to a single displayport. I'd love to get a solution to allow me to use two monitors plus the built-in display! Any ideas??

NativeBoot with two monitors

Hi,
I have machine with windows 8.1 where i wanted to host development environment - Windows 2012 Server. I decided to try Hyper-V Client and everything seems to work fine. When i boot to Windows 8.1, then connect via RDP to my developer machine with Windows
2012 Server. But i found out, that there is nice feature which allows me to boot to Windows 2012 directly. I checked that and found a little performance boost using it. But like always nothing is so great as looks on paper and i got problem connecting two
monitors. In RDP connection i can span to two monitors without problem, but using native boot just duplicate screen. In Device Manager -> Display Adapters i see only one monitor, and one display adapter (Microsoft Basic Display Adapter).
I haven't found any information about limitation of connected monitors using native boot. Is it possible?

"Native Boot" means that you are not running in a VM, the VHD is booted just like a physical drive and the OS is running on the bare metal.
I am guessing that you need to redetect the display adapter when booted this way or install a 3rd party driver.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

M92p HELP!!! About to return 6 new M92p due to Problems with two monitors.

Hope someone can help. Just unpacked last week six (6) brand new M92p with dual 24" monitors. Unfortunatelly the monitors are NOT from Lenovo since Lenovo does not sell color calibrated monitors.
The problem we are having is that we have tried connecting the two monitors using different conbinations of the 3 or 4 available video connectors on the back of the machine.
only ONE monitor works at 1920x1200, the other defaults to 640x480.
All the machines have a video card with 2GB. The video card has a DVI and a VGA port. The motherboard has VGA and DisplayPort. We tried one cable to DVI on video card the other on VGAon video card. Then we tried One cable on video card another on motherboard.
I also disable the motherboard video in BIOS; that did not work either.
NOTHING works!!! I am about to repack all these equipment and send them back.
If anyone has any solution to this issue, please let me know.
Thanks!

Possible driver issue. Have you run Windows Update and Lenovo System Update?
Also, beware of the BIOS settings for multi-monitor: http://support.lenovo.com/en_NL/downloads/detail.page?DocID=HT062228

Is there a way to have one workspace with two monitors?

In Maverick is there a way to return to the system were you have 1 workspace and two monitor? Where at present there is this tendency for applications to auto hide partially.

Yes it is, my bad. I'm running an external display myself and have that setting. I saw the preference with the checkmark and wrote that one by mistake.

Mac mini will not boot up with two monitors attached

New Mac mini running OS 10.10.1. I have a LCD monitor attached to the HDMI port, and a Cintiq 21 UX LCD monitor attached to a thunderbolt port.
It boots up properly with only the first LCD monitor attached to the HDMI port.
When I leave both monitors connected before starting the computer I get no chime, and a black screen. The light on the front of the Mac mini comes on, but nothing else happens. I have to turn off the Mac mini, unplug the second monitor and then reboot. It always starts up perfectly then. After starting the computer, I plug the second monitor in, and everything is fine.
It’s kind of a pain in the neck to constantly plug and unplug the second monitor from the back of the Mac mini. Is there anything I’m overlooking?

Thank you, Illaass! Resetting the SMC solved the problem! I tried that first because I would prefer not to lose any preferences, and also because it was the easiest to try. You must be a genius in addition to being such a good egg!
(This is the number of smiles I smiled after my Mac mini booted properly with both monitors connected.)

How to synchronise with two monitors

Similar Messages

Maybe you are looking for