How to synchronize the node's change to DB?

I'VE set the tree : editingMode="clickToEdit".
now, how can i listen to the clickToEdit on the node ,and then i can sync the change to my db.

because i just want it more easy to change the node's name for user
actually,i find it is a little slow ,but,in my opinion,it is worth.
thanks for your advice.
Danny
Edited by: Danny Zhou on 2009-12-7 下午11:12

Similar Messages

How to synchronize the FieldPoint time with my computer time?

When I using MAX to read the values from my FieldPoint cFP-1804 module, there is and timestamp generated for every measurement, but it does not match my PC's system time. How to synchronize the FieldPoint time with my windows PC?
I found a thread on the forum regarding this problem (http://digital.ni.com/public.nsf/allkb/C4E56AD6450FC5FD86256DFF0007FF01), it ask me to select the Time Zone on the System Setting tab, but I didn't find any System Setting tab and Time Zone setting in my MAX screen. (MAX version4.4)
I'm using the cFP-1804 without embedded CPU module, I'm using asp.net, measurement studio to link with the cFP-1804, not by using Labview. Does cFP-1804 have a Time Server function? Please tell me how to match the FieldPoint time with my PC.
Thanks

Hi Presario2100,
In order to obtain an updated timestamp with each FieldPoint Read, you should
use a Flat Sequence structure. In the same frame as the
FieldPoint Read, use a Get Date/Time In
Seconds node.
The program obtains a fresh Timestamp each time the FieldPoint Read VI is
called.
I hope this helps.
Message Edited by Pie56694 on 08-15-2008 05:58 PM
Attachments:
TSUpdates.jpg ‏38 KB
FlatSequence.jpg ‏54 KB

How to Delete the node from cluster when the machine crashed?

In an three nodes Rac of 11g r2,How to delete the node from cluster when the machine crashed?
There is now way to repair the machine and have to add a new one.
What is step to follow up?

hi
IF YOU WANT TO DELETE RAC1 NODE
check $./olsnodes
1) delete the instance using dbca from any active nodes
crs_stat -t
srvctl stop asm -n rac1
2) delete listener
3) delete oracle_home from oracle user
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<db_home> "CLUSTER_NODES={RAC1}
4)delete asm home
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<asm_home> "CLUSTER_NODES={RAC1}
5) update cluster node
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<db_home> "CLUSTER_NODES={active nodes like rac2,rac3}
6) update ASm home
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<asm_home> "CLUSTER_NODES={active nodes like rac2,rac3}
cd $ORA_CRS_HOME
cd crs/opmn/conf
check for
$cat ons.config
remoteport=6200
cd crs_home/bin
$./racgons remove_config rac1:6200
$ go to crs home
and $ORA_CRS_HOME/crs/install/rootdelete.sh
$ORA_CRS_HOME/crs/install/rootdeletenode.sh
check for ./olsnodes

How to edit the node value of a tree in webdynpro java

Hi ALL
I have Tree UI element where i got displayed all the nodes by calling the BAPI
Now my requirement is when i put the cursor at any node in the Tree struture then on click of insert button i need to insert the new node with the text , the user has to be option to give new text for the new node dynamically , so while adding the new node in a tree the tree has to choose the text for new node , like how to edit the node of a tree to add new text.
If any one can send the sample code on the same then it would be great help to me.
Similar requirement like in table UI Like however we are adding the new row in a table when we click on the insert button then cursor will go to that new row in a table where user can enter his details in the table.. now i am looking for the same requirement in a Tree UI element.
is it possible the same requirement in tree UI element in webdynpro for Java??
Thanks
kallki reddy

Hi kallki reddy
In general I think this is not possible in the form you'd like. It seems the Tree control is read-only thing always. It cannot provide editing capabilities.
Table is different thing. You can select within many different cell editors including Input Fields.
I guess that you scenario could be implemented not with Tree control, but with Table with Master Column. The master column allows to bring up a hierarchy into a plain table. So it's just a tree inside a table.
Here you can find further details: [TreeByNestingTableColumn API|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/92/12a74046033913e10000000a155106/content.htm]
BR, Siarhei

How to stop the users from changing the Decimal in SAP

How to stop the users from changing User Profile

Hai,
It is not possible to restrict SU3 to display, because it has only S_TCODE has the authorization object.
If you really want to restrict users from changing their profile you have to remove the SU3 access and give SU1 or SU2 which gives access only to Personnel details and Parameters.
Hope this helps.
Regards,
Yoganand.V

How to get the Reports of Change Tracking Table in MDM?

Hi!
Please tell me how to get the reports of Change Tracking Table in MDM which is a System table, directly from MDM without using any interface.
Thanks in advance for the reply.
With Best Regards
Devendra Pandey

Hi Devendra,
MDM can track changes on tables and fields. The level of change tracking, and which tables/fields to track, are configurable in the MDM Console. MDM opens a new database on the same database engine as the MDM repository and writes all change records to this database.
For information of various steps you can visit
<a href="http://help.sap.com/saphelp_mdm550/helpdata/en/45/c7b20339ee570ae10000000a114a6b/content.htm">this URL</a>
Regards,
Krutarth

How to see the MM invoice changes in sap?

Hi
How to see the MM invoice changes in sap ?

Dear Prashant,
When ever we perform LIV and is blocked for payment (due to price variance or other variance) is stored on table RBKP_BLOCKED
Now when we release it through t. Code MRBR that time its get deleted from RBKP_BLOCKED
So you can always track it :
Go to ->SE16 ->Enter table name CDHDR -.>Table contents (F7)
In the selection screen enter
OBJECTCLAS as INCOMINGINVOICE
OBJECTID as =Invoice no+year (e.g 51056066022011 where is 5105606602 invoice no 2011 is year)
TCODE as MRBR
->Execute
You will find the details when it was released Date ,Time, User ID etc
Edited by: redriver on Dec 26, 2011 2:23 PM

I dropped my iphone vertically on the ground. The screen is normal when it is locked. but when unlocked, it is broken down from the clock. Can it be fixed and is it under the warranty conditions? If not how much is the price to change the screen?Thanks

I dropped my iphone vertically on the ground.The screen works when it is locked.When unlocked, it's broken down from the clock.Can it be fixed and is it under warranty conditions?If not how much is the price to change the screen?Thanks

User damage is not covered by warranty unless you have Applecare +
assuming you do not, the out of warranty exchange price for an iPhone 4 is $149,exchange at an Apple Store genius bar
iPhone 4 are not repaired they are exchanged

How to get the node id of the content shown from campaign

Hi
Can any one please tell how to get the node id of the content shown by the campaign
in jsp
Thanks

One option is to define a custom ad renderer, which is registered with the proper mime-type.
The campaign would run your renderer if the campaign retrieved a node with a binary of the proper registered mime-type.
This allows you to insert yourself into the call chain for the node rendering. You can access the nodeID at that point (and do the typical rendering-- providing a URL for the ShowPropertyServlet)
-Steve

How to get the node value of payload

Hi
The null is returned when I use the following code to get the User_ID element in the payload, but there are values in the User_ID element of the payload
Task task_test = wfSvcClient.getTaskQueryService().getTaskDetailsById(wfCtx, taskId);
System.out.println("the payload value is " + task_test.getPayloadAsElement().getElementsByTagName("User_ID").item(0).getNodeValue());
How to get the node value of payload ? any suggestion?
Thanks
Jayson

Hi Jayson,
Try:
System.out.println("the payload value is " + task_test.getPayloadAsElement().getElementsByTagName("User_ID").item(0).getFirstChild().getNodeValue());
So add the getFirstChild() call in between.
If this works, maybe consider using JAXB to marshall the payload details to POJO's. This will make reading the payload details much easier.
Regards, Ronald

Hey. anyone knows how to synchronize the different sounds in a song the most easy way?

hey. anyone knows how to synchronize the different sounds in a song the most easy way?

Play better... just kidding. Set an appropriate quantize value for all the regions in the inspector window. If you are doing live playing and need to synch to that it is MUCH more complicated. If you're new at this it might actually be easier to re-play it.

How to synchronize the mail automatically. With out clicking the mail icon ?

How to synchronize the mail automatically. With out clicking the mail icon ?

You can do that with the keyboard.
*View > Zoom > Reset (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
There may be an extension that has a reset zoom button.
*https://addons.mozilla.org/en-US/firefox/search/?q=zoom
You can also create your own button and use this code to reset the zoom: FullZoom.reset();
*Custom Buttons: https://addons.mozilla.org/firefox/addon/custom-buttons/

How to map the node which i have created dynamically into the view

Hi All,
Many thanks to all ur answers in advance.
I have created a node dynamically.I want to display the fields which i have fetched in that node.
i dont know how to map the node which i have created dynamically into the layout of the view.
Other than Using ALV is there any other way to do.
for example usin table control

Hi,
use the reference variable of view to access the corresponding UI element and then use the method of that UI element to do data binding with context node.
for ex:
Context node = flights
element = inputfield, ID = inp_name
data view type ref to if_wd_view.
data lr_inp type ref to cl_wd_input_field.
lr_inp ?= view->get_child_element( ' INP_NAME' ).
use following methods of input field to define the data binding.
SET__DDIC_BINDING( )
BOUND__PROPERTY( ).
BOUND__PRIMARY_PROPERTY( ). " for input field it is value property.
Get the reference of view from wddomodifyview method as importing parameter(view). Store this parameter as controller attribute.
Thanks,
Rahul

How to clear the node which has multiple attributes

Hello ,
how to clear the node which has multiple attributes.
I've tried this using the method SET_STATIC_ATTRIBUTES_NULL but it's not working.
Thanks,
Sandhya.

Hello,
I suggest you to create an internal table or structure clear it and the bind it to the context node.
Another possibility is to try to invalidate the node (method INVALIDATE of interface IF_WD_CONTEXT_NODE).
Regards.

How to get the Node Value from XmlValue result?

Hi ,
I am not able to get the Node Value from the result. In my XQuery im selecting till a Node, if i change my query as
collection('PhoneBook')/phone_book/contact_person/address/string()", qc);
im getting the node value, but here the problem is its not a Node so i cannot get the Node name.
So how can i get the Node Name and Node value together?
any help please ????
XML :
<?xml version="1.0" encoding="UTF-8"?>
<phone_book>
<contact_person>
<name>
<first_name>Michael</first_name>
<second_name>Harrison</second_name>
</name>
<address city="yyyyy" pincode="600017" state="xxxxx">
176 Ganesan street, Janakinagar, alwarthirunagar
</address>
</contact_person>
<phone_number type="mobile">9881952233</phone_number>
<phone_number type="home">044-24861311</phone_number>
<phone_number type="office">080-12651174</phone_number>
</phone_book>
Code:
XmlQueryContext qc = manager.createQueryContext();
XmlResults rs = manager.query
("collection('PhoneBook')/phone_book/contact_person/address", qc);
while(rs.hasNext()){
XmlValue val = rs.next();
System.out.println(val.getNodeName() + " = [ " + val.getNodeValue() + " ] ");
Output
address = [ ]

You are right, this seemed un-intuitive to me too, but I finally understood how it's done.
The "value" of a node is actually the total amount of text that is not contained in any of the node's child nodes (if any). So a node with child nodes can still have text value.
To get the 'value' of an element node, you must therefore concatenate the values of all children of type "XmlValue::TEXT_NODE", of that node. Try it.
In your example, the <address> node has no child elements, my guess is that BDB XML stores the address string "176 Ganesan street, Janakinagar, alwarthirunagar" inside a child node of <address> node (of type XmlValue::TEXT_NODE) because you wrote the string on a separate line.

How to synchronize the node's change to DB?

Similar Messages

Maybe you are looking for