How to table double line

In the example, Building tables.vi, the first row and the first column has a double line.
How do I do that on the front panel?
creating the double-line.

Right click on the table and select Visible Items>Row Headers and Visible Items>Column Headers. the data in Row and column headers are not part of the 2D string array that is a table but are available from the properties RowHdrs[] and ColHdrs[] as the example shows.

Similar Messages

How to keep together Title + table's line across pages

Hi all, I have a question.
I'm trying to create a .rtf template where I have a table with 4 lines and a title <PROJ_NAME>
I need to repeat this table (with all the necessary information - 4 lines) as many times as the projects' names are stored on the DB.
For example: if the employee has 4 projects, on the report I will see 4 times these table and the relative project name as title.
So, the repeating group mechanism works perfectly, but I am not able to control how the table's lines are splitted across pages....
In other words if I have two pages in my .rtf template and I am at the end of the first page:
1) I don't want to see the title on the bottom of the first page and the relative table above on the second page (title and table splitted on two differents pages)
2) I don't want to see the title and a portion of the table on the bottom of the first page and the rest of the table (1,2 or 3 lines) above on the second page (table splitted on two differents pages)
At the end I'd like to see always title and table together even if the page finishes. If the title + table exced the table's vertical border, it has not be splitted, but rewrite entirely (title + table) on the next page.
The syntax is this:
<?for-each-group:G_PROJ;./PROJ_NAME?><?PROJ_NAME?>
TABLE WITH 4 LINES
<?end for-each-group?>Page break
I tried also, reading the forum, to use the paragraph properties (Keep lines together), but nothing.....
Anyone can suggest me something ?
Thanks in advance
Alex

After the for loop,
take a table (suppose A) with one row and one column. In that table insert the Project name tag. Below that tag, insert an inner table(suppose B) in table A with 4 rows and columns you wish. Now select the outer table A(select the whole table), and in the table properties/Row , in the options , uncheck the 'Allow row to break across pages' property.
end the for loop.

How to read complete line displayed thru ALV report on double click? urgent

Hi guys,
An ALV report is displayed using 'REUSE_ALV_LIST_DISPLAY' and i have a requirement such that i have to read the line item on which double click is done.
I have to fetch the line item, field by field and not by characters. I have attached the function code and all using PF status.
Please tell me an approach as how to fetch the line item on which double click is done.
Points will be rewarded.
Regards
Rahul

Hi ..
i did report with belnr , bukrs , Gjahr . which will call the transcation code FB03 displaing thedocument ...
please cut and paste the report it will work ..
REPORT zdemo_alvgrid                 .
TABLES:   bkpf . " ekko.
type-pools: slis.                                 "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
BUKRS   like bkpf-BUKRS,
BELNR like bkpf-BELNR,
GJAHR like bkpf-GJAHR,
BLART like bkpf-BLART,
BLDAT like bkpf-BLDAT,
BUDAT like bkpf-BUDAT,
MONAT like bkpf-MONAT,
XBLNR like bkpf-XBLNR ,
* ebeln TYPE ekpo-ebeln,
* ebelp TYPE ekpo-ebelp,
* statu TYPE ekpo-statu,
* aedat TYPE ekpo-aedat,
* matnr TYPE ekpo-matnr,
* menge TYPE ekpo-menge,
* meins TYPE ekpo-meins,
* netpr TYPE ekpo-netpr,
* peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
      gd_tab_group type slis_t_sp_group_alv,
      gd_layout    type slis_layout_alv,
      gd_repid     like sy-repid,
      gt_events     type slis_t_event,
      gd_prntparams type slis_print_alv.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform build_events.
perform build_print_params.
perform display_alv_report.
*&      Form BUILD_FIELDCATALOG
*       Build Fieldcatalog for ALV Report
form build_fieldcatalog.
* There are a number of ways to create a fieldcat.
* For the purpose of this example i will build the fieldcatalog manualy
* by populating the internal table fields individually and then
* appending the rows. This method can be the most time consuming but can
* also allow you more control of the final product.
* Beware though, you need to ensure that all fields required are
* populated. When using some of functionality available via ALV, such as
* total. You may need to provide more information than if you were
* simply displaying the result
*               I.e. Field type may be required in-order for
*                    the 'TOTAL' function to work.
fieldcatalog-fieldname   = 'BUKRS'.
fieldcatalog-seltext_m   = 'Purchase Order'.
fieldcatalog-col_pos     = 0.
fieldcatalog-outputlen   = 10.
fieldcatalog-emphasize   = 'X'.
fieldcatalog-key         = 'X'.
* fieldcatalog-do_sum      = 'X'.
* fieldcatalog-no_zero     = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'BELNR'.
fieldcatalog-seltext_m   = 'PO Item'.
fieldcatalog-col_pos     = 1.
fieldcatalog-outputlen   = 10.
   fieldcatalog-emphasize   = 'X'.
fieldcatalog-key         = 'X'.
    append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'GJAHR'.
fieldcatalog-seltext_m   = 'Status'.
fieldcatalog-col_pos     = 2.
fieldcatalog-outputlen   = 10.
fieldcatalog-emphasize   = 'X'.
fieldcatalog-key         = 'X'.
    append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'BLART'.
fieldcatalog-seltext_m   = 'Item change date'.
fieldcatalog-col_pos     = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'BLDAT'.
fieldcatalog-seltext_m   = 'Material Number'.
fieldcatalog-col_pos     = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'BUDAT'.
fieldcatalog-seltext_m   = 'PO quantity'.
fieldcatalog-col_pos     = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MONAT'.
fieldcatalog-seltext_m   = 'Order Unit'.
fieldcatalog-col_pos     = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'XBLNR'.
fieldcatalog-seltext_m   = 'Net Price'.
fieldcatalog-col_pos     = 7.
fieldcatalog-outputlen   = 15.
* fieldcatalog-do_sum      = 'X'.
* fieldcatalog-datatype     = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
** fieldcatalog-fieldname   = 'PEINH'.
** fieldcatalog-seltext_m   = 'Price Unit'.
** fieldcatalog-col_pos     = 8.
** append fieldcatalog to fieldcatalog.
* clear fieldcatalog.
endform.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
*       Build layout for ALV grid report
form build_layout.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
* gd_layout-totals_only        = 'X'.
* gd_layout-f2code            = 'DISP'. "Sets fcode for when double
*                                         "click(press f2)
* gd_layout-zebra             = 'X'.
* gd_layout-group_change_edit = 'X'.
* gd_layout-header_text       = 'helllllo'.
endform.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
*       Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_callback_top_of_page   = 'TOP-OF-PAGE' "see FORM
            i_callback_user_command = 'USER_COMMAND'
*            i_grid_title           = outtext
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
*            it_special_groups       = gd_tabgroup
            it_events               = gt_events
            is_print                = gd_prntparams
            i_save                  = 'X'
*            is_variant              = z_template
       tables
            t_outtab                = it_ekko
       exceptions
            program_error           = 1
            others                  = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
*       Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select BUKRS
BELNR
GJAHR
BLART
BLDAT
BUDAT
MONAT
XBLNR up to 10 rows
from bkpf
into table it_ekko.
*select ebeln ebelp statu aedat matnr menge meins netpr peinh
* up to 10 rows
* from ekpo
* into table it_ekko.
endform.                    " DATA_RETRIEVAL
* Form TOP-OF-PAGE                                                 *
* ALV Report Header                                                 *
Form top-of-page.
*ALV Header declarations
data: t_header type slis_t_listheader,
      wa_header type slis_listheader,
      t_line like wa_header-info,
      ld_lines type i,
      ld_linesc(10) type c.
* Title
wa_header-typ = 'H'.
wa_header-info = 'EKKO Table Report'.
append wa_header to t_header.
clear wa_header.
* Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
               sy-datum+4(2) '.'
               sy-datum(4) INTO wa_header-info.   "todays date
append wa_header to t_header.
clear: wa_header.
* Total No. of Records Selected
describe table it_ekko lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Records Selected: ' ld_linesc
                    into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
       exporting
            it_list_commentary = t_header.
*            i_logo             = 'Z_LOGO'.
endform.
*       FORM USER_COMMAND                                          *
*       --> R_UCOMM                                                *
*       --> RS_SELFIELD                                            *
FORM user_command USING r_ucomm LIKE sy-ucomm
                  rs_selfield TYPE slis_selfield.
* Check function code
CASE r_ucomm.
    WHEN '&IC1'.
*   Check field clicked on within ALVgrid report
    IF rs_selfield-fieldname = 'BELNR'.
*     Read data table, using index of row user clicked on
      READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
*     Set parameter ID for transaction screen field
      SET PARAMETER ID 'BES' FIELD   wa_ekko-bELNR .
      SET PARAMETER ID 'MES' FIELD   wa_ekko-bUKRS .
      SET PARAMETER ID 'DES' FIELD    wa_ekko-GJAHR .
*     Sxecute transaction ME23N, and skip initial data entry screen
*      CALL TRANSACTION 'FB03' AND SKIP first screen.
SUBMIT RFBUEB00
*        WITH ALCUR ...
*        WITH ARCHOBJ ...
*        WITH ARCH_SEL ...
*        WITH ARUSETYP ...
*        WITH AUTBEXNO ...
*        WITH AUTH_BUK ...
*        WITH AUTH_LDR ...
*        WITH BR_AWKEY ...
*        WITH BR_AWSYS ...
*        WITH BR_AWTYP ...
        WITH BR_BELNR = wa_ekko-bELNR
*        WITH BR_BLART ...
*        WITH BR_BLDAT ...
*        WITH BR_BUDAT ...
        WITH BR_BUKRS =    wa_ekko-bUKRS
*        WITH BR_CPUDT ...
        WITH BR_GJAHR = wa_ekko-GJAHR
*        WITH BR_RLDNR ...
*        WITH BR_SEQ ...
*        WITH BR_USNAM ...
*        WITH BR_XBLNR ...
*        WITH EXCDT ...
*        WITH P_STATS ...
*        WITH STATISTK ...
*        WITH STATUSD ...
*        WITH STATUSL ...
*        WITH STATUSM ...
*        WITH STATUSS ...
*        WITH STATUSV ...
*        WITH TCODE ...
*        WITH UNAME ...
*        WITH XEMUCNV ...
*        WITH XUSEAR ...
*        WITH XUSEAS ...
*        WITH XUSEDB
        AND RETURN .
    ENDIF.
ENDCASE.
ENDFORM.
*&      Form BUILD_EVENTS
*       Build events table
form build_events.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
       exporting
            i_list_type = 0
       importing
            et_events   = gt_events[].
read table gt_events with key name = slis_ev_end_of_page
                           into ls_event.
if sy-subrc = 0.
    move 'END_OF_PAGE' to ls_event-form.
    append ls_event to gt_events.
endif.
    read table gt_events with key name = slis_ev_end_of_list
                           into ls_event.
if sy-subrc = 0.
    move 'END_OF_LIST' to ls_event-form.
    append ls_event to gt_events.
endif.
endform.                    " BUILD_EVENTS
*&      Form BUILD_PRINT_PARAMS
*       Setup print parameters
form build_print_params.
gd_prntparams-reserve_lines = '3'.   "Lines reserved for footer
gd_prntparams-no_coverpage = 'X'.
endform.                    " BUILD_PRINT_PARAMS
*&      Form END_OF_PAGE
form END_OF_PAGE.
data: listwidth type i,
        ld_pagepos(10) type c,
        ld_page(10)    type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform.
*&      Form END_OF_LIST
form END_OF_LIST.
data: listwidth type i,
        ld_pagepos(10) type c,
        ld_page(10)    type c.
skip.
write:/40 'Page:', sy-pagno .
endform.
reward points if it is usefull ...
Girish

How to set border lines in table and also in template in the smartforms ?

How to set border lines in table and also in template in the smartforms ?
As I have to create table with following detals
total row = 3
row1 = 3 column
row2 = 6 column
row3 = 9 column
for 2nd and 3rd row data to be fetched using coding.
so can anybody explain me what should i use
Table or Template ?
and I want the border like excel format.
Can anybody suggest me ?
Thanks
naresh

if the data is multiple i.e. line items choose table.
if the data is single i.e. fixed choose template.
Create table
> Draw u r no lines
> choose option select pattern
> select display framed patterns
Choose u r required one.
out lined, or full lined. u can choose option.
same procedure to be followed for template also.
with regards,
Kiran.G

How to indent second line in a very long heading when creating a table of contents?

I need to make a table of contents.
Some of the chapter headings are very long and fill more than a single line.
When I create my table of contents, I want the second lines to be 'pushed in' in the table.
Like this
1 chaper one xxxxxxxxxxx
2 Chapter two xxxxxxxxxxxxxxxxxx
3 Chapter three x xxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxx xxxxxxxxxxx
4 Charpter four xxxxx xxxxx
5 Chapter five xxxxxxxxxx xxx xxxxx xx xxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxx xxxx xxxxx
I thought I had solved it by having the actual chapter headings indented like this, but the table of contents overlooks this/overrules this.

See also my reply to the duplicate thread:
http://social.technet.microsoft.com/Forums/office/en-US/8f88b64c-1a15-4761-aed9-f662f17b94ca/how-to-indent-second-line-in-a-very-long-heading-when-creating-a-table-of-contents?forum=word
Cheers
Paul Edstein
[MS MVP - Word]

How to draw horizontal line at the end of table for multiple line items

Dear Experts,
                   Pls can anyone help me how to draw horizontal line at the end of table for multiple line items . kindly help me regarding this
Thanks
Ramesh Manoharan

Hi
   I tried as per your logic but it is not solving my problem . when i am gone to table painter it is showing line type 1 and line type 2
is below format.. if u see here line type 1 bottom line and line type 2 top line both are same.. so how to avoid this ?
                          line type 1
                         line type 2

Printing double line in Column label Box/Table Line Type of smartform

Hi,
In MAIN window, in ITEM table, the header box, (where column labels are printed), one double lines r printing!! it looks like (not exactly) instead of single line (________) its printing double lines (======), so, pls. let me know, Wht culd be the reason?
Thank you

Hi,
Check that if you used table borders in attributes of line types.
And also check if you are using sy-unline...
Regards,
Shankar.

How to set a line of table as read only during runtime?

How to set a line (or a cell) of table as read only during runtime?

hi wei
when you create a table keep the readonly property of table as false
you create the columns of table as inputfield.you bind the readonly property of
the inputfield to two context variables
say one for all the columnfields you to want always have as readonly and let this contextattribute of type boolean and let this be attr1
and another for all the columnfields you donot want to be readonly and let this contextattribute of type boolean and let this be attr2
initially set the context attributes attr1 and attr2 as true so the entire table is readonly.
based on the condition you want to check change the attr2 to be false.
if(your condition)
wdcontext.currentcontextelement.setattr2(false);
hope this helps.
regards
saravana

Adding a double line border to a table

Hi
i am creating a PDF form which contains a table, is there a way to set a double line border to to the table in the form ( like the option in EXCLE - i mean border like this: || )
Thanks, Ami

Hi Ami,
Try using borderStyle property of a field
var f = this.getField("MyField");
f.borderStyle = border.u; /* border.s evaluates to "inset" */
OR
f.borderStyle = border.i; /* border.s evaluates to "beveled" */

How to handle double click in a table control?

Hi,
Can any one let me how to handle double click event in a table control in dialog programming?
here i need to navigate to another screen when user double click on the table contols (emp number column).
thanks in advance,
PrasadBabu.

to define double click in your table controlwhich is similar to 'PICK' function. Enable F2 in PF-status for this
Table Control Question
Check the above thread which was posted recently on SDN, please award points if found helpful

Urgent : How to modify the line type and table type

I am working on ALV Grid Control, i need to know how to modify the line type values to table type.
             ls_celltab-fieldname = 'ZSAVINGS '.
             ls_celltab-style = l_mode.
        INSERT ls_celltab INTO TABLE pt_celltab.
Here ls_celltab is line type and pt_celltab is table type.
Please give me the suggestion ASAP.
C.Bharath Kumar

Hi,
Here is the example
DATA: BEGIN OF LINE,
        LAND(3) TYPE C,
        NAME(10) TYPE C,
        AGE      TYPE I,
        WEIGHT   TYPE P DECIMALS 2,
      END OF LINE.
DATA ITAB LIKE SORTED TABLE OF LINE
          WITH NON-UNIQUE KEY LAND NAME AGE WEIGHT.
LINE-LAND = 'G'.   LINE-NAME   = 'Hans'.
LINE-AGE = 20.    LINE-WEIGHT = '80.00'.
INSERT LINE INTO TABLE ITAB.
LINE-LAND = 'USA'. LINE-NAME   = 'Nancy'.
LINE-AGE = 35.    LINE-WEIGHT = '45.00'.
INSERT LINE INTO TABLE ITAB.
Regards
Sudheer

How to determine actual table control line

Hi experts,
How can I determine the table control line in case of scrollable table control.
I tried this one, but did not worked correctly:
GET CURSOR LINE l_line_fc2.
l_line = l_line_fc2 + ctrl_mod-top_line - 1.
Everytime I try to catch the top_line of the table control its value is always 1. Is it possible?

Hi,
Current table control line will be found in SY-STEPL.
Regards
Mohammad Shaik.

How to draw and modify double lines with Adobe Illustrator?

I need tot draw roadmaps. This should be easy using the pen tool, but my problem is that I cannot find a way to draw double lines with this tool. I have seen many fancy border styles and patterns. Some do have double or even quadruple lines, but the problem is than that they have an offset from the vector line and the space in between the two lines (the edges of the road) cannot be filled. Somewere I also found some pens called 'Double line 1.1' to 'Double line 1.6' but they also had an offset from the vector and I could not chance the size of the lines and the interval in between them independently.
What I am looking for is a way to draw two lines in parallel and have the option tot fill the space in between with a color or even a pattern.
The color and size of the lines should be changeable to make a distinction between several types of road.
Is there an existing set of pencils for this purpose? It would be nice to be able to draw not only roads, but also railways and rivers!
I am surely not the first person who needs to do this?
I use AI version 6

Jacob,
Thanks for the answer. I have been searching for a solutions for a long
time, but today I found the solution on a forum (not on this one). That
solution is exactly as you described below, i.e. using a coloured line and a
narrower white line on top of the first one. My problem was that I did not
know how to create a custom brush based on the two lines. Now I know how to
do that. However, I still have the problem. I can now draw double lines and
I can change the color of the background line (the coloured one) but I
cannot change the white colour of the narrower line. I assume that I have to
completely redefine a new brush when I need to change that colour too.
Regards,
Rob Kole
Van: Jacob Bugge [email protected]
Verzonden: donderdag 28 maart 2013 17:04
Aan: RKOLE
Onderwerp: How to draw and modify double lines with Adobe
Illustrator?
Re: How to draw and modify double lines with Adobe Illustrator?
created by Jacob Bugge <http://forums.adobe.com/people/Jacob+Bugge> in
Illustrator - View the full discussion
<http://forums.adobe.com/message/5186535#5186535

How do I double space a document using Pages There is NO Line Spacing control in the drop down menu in the format bar

How do I double space a document in Pages. The instruction say to use the Line Spacing control in the format bar, but there is NO Line Spacing control in the drop down menu under Format. I'm writing a novel and I am having to manually double space after every line. It is **** when I am trying to edit my work.

The computer is not too old (and neither are you ). It may be better if you could upgrade it from 10.5.8 to 10.6 ... but that would not solve this problem.
As both Paul and I have advised ... get yourself on Pages > go to the View menu and halfway down is the option 'Show Inspector'. You'll end up with a panel like Paul showed you in his post of 08:42. Let's see what you can do from there.

How to determine fixed line of table control using BDC program ?

Dear All,
I create program using BDC that contains table control.
Unfortunately the table control line of BDC program will depend on the resolution of our PC setting.
Sometime I have 2 lines, sometime 3 lines (in different PC).
How to determine fixed line of table control?
So it will never be confusing me whether I have 2 or 3 lines.
Thnx - Regards,
(Taufik K.)

Hi Taufik,
Check the table CTU_PARAMS and field DEFSIZE for setting fixed line of a table control.
CALL TRANSACTION 'VA01' USING it_bdcdata
OPTIONS FROM OPT
MESSAGES INTO it_mesg.
opt of type ctu_params.
WA_CTU_PARAMS-DISMODE = 'N'. "no screen mode
WA_CTU_PARAMS-UPDMODE = 'S'. "synchronus update
WA_CTU_PARAMS-NOBINPT = 'X'.
WA_CTU_PARAMS-NOBIEND = 'X'.
WA_CTU_PARAMS-DEFSIZE = 'X'. "Default size
Default size will play good role in terms of resoultion. in one system in table control you can see 10rows, but in others system it will show 20 records. it depends on resoultion. but when you set the default size then it will take same (default screen size) in all the systems when you run BDC.
Reward if helps.
Regards,
Senthil
Message was edited by: senthil kumar

How to table double line

Similar Messages

Maybe you are looking for