How to terminate the update of a program that is locked up?

Facebook was updating and then just locked up. The line stopped moving. Shut the iPad off and turned on but still stuck. Held button and off button for 10 seconds but no luck, again. Any ideas?

• Log out of your iTunes store account. Go to Settings > Store > Sign Out Then press the Home button.
• Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
• After restart, the Waiting should be gone.
 Cheers, Tom

Similar Messages

How to Terminate the Session of Running program from other program

I need to Terminate the session of the user using a particular program by running a other z program.

Use the function module TH_DELETE_USER.
Welcome to SDN. Please remember to award points for helpful answers. Thanks.
Regards,
Rich Heilman

How to debug the update FM

Hi,
I am facing a problem with the debugging of the update FM. I have enabled the update debugging and the system says that update debuging is on . even though the control did not go into the FM.
Do i need to check in any other transaction . Please give me the details steps on how to see the what is happening in the update FM.
Full marks are guaranteed.
thanks
sankar

Hi
I have got a clue from SAP help on how to debug the update FM see the below information from SAP
When you debug a program that calls function modules using the IN BACKGROUND TASK addition, they are processed in a background work process (additional internal session). If you set the In background task: Do not process option, the system collects the function calls, but does not start the background work process. The Debugger assigns a transaction ID, which identifies the background work process uniquely. You can now start the Debugger for the background work process using transaction SM58. You can select the function module concerned here, and then execute it via the Edit menu.
I have done everything that is said above , but could not find any entries in SM58
any suggestions
thanks
sankar

How to use the updated value in the same update statement

Hello,
I just wonder how to use the updated new value of other column in the same udpate statement. I am using Oracle 11.2, and want to update the two columns with one update statement as following:
create table tb_test (id number(5), tot number(5), mon_tot number(5));
update tb_test set (tot = 15, mon_tot = tot *15) where id = 1;
...I would like to update both tot and mon_tot column, the value of mon_tot shall be determinted by the new value of tot.
Thanks,
Edited by: 939569 on 1-Feb-2013 7:00 AM

Edit: example added
SQL> create table tb_test
2 ( id number(5)
3 , tot number(5)
4 , mon_tot number generated always as (tot*15) virtual
5 );
Table created.
SQL> insert into tb_test (id, tot) values (1, 5);
1 row created.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1          5         75
1 row selected.
SQL> update tb_test
2 set    tot = 15
3 where id = 1;
1 row updated.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1         15        225
1 row selected.

How to display the updated data from db to user interface in sruts framewor

A beginner in this area, I have been able to read a record from a
MySQL database and populate in jsp form . Now, my goal is to
allow the user to edit the contents of the form and then update the
record in MySQL and then display the same in jsp. page
The scenario in detail
1)the data is fetched from db and displayed in non-editable format
2)Next button is clicked
3)Now in the same jsp page I view the same data from db in editable format
4)The user is allowed to change the information
5)Now update button is clicked
6)the records are updated in the db -Finished doing till this step
7)But the updated info in non - editable format to be displayed in jsp page is left pending.
Here is my code for jsp,i want know how to write an action for this,tried doing the same in java and I'm successful.but what I need is how to fetch the updated information in the user interface.
I've made both editable as well as non editable info in the same page with different actions.
pl help me,I'm a newbie
<%@ taglib uri="/WEB-INF/struts-bean" prefix="bean" %>
<%@ taglib uri="/WEB-INF/struts-html" prefix="html" %>
<%@ taglib uri="/WEB-INF/struts-logic" prefix="logic" %>
<%@ page language="java" %>
<%@ page import="java.util.ArrayList,java.util.Iterator" %>
<%@ page import="com.finocus.common.container.CustomerDetailsTest;" %>
<html:html>
<head>
 <title>CUSTOMER DISPLAY</title>
</head>
<body>
 <table width="100%" bgcolor="darkkhaki">
 <tr>
 <td><table width="100%" bgcolor="indigo">
 <tr>
 <td>Display</td>
 <td>Update</td>
 <td>Verify</td>
 <td>Confirm</td>
 </tr>
 </table>
 </td>
 </tr>
<%
 //Container for holding data
 ArrayList list = (ArrayList)session.getAttribute("CUSTOMERDETAILS");
 Iterator itr=list.iterator();
 while(itr.hasNext())
 CustomerDetailsTest cust = (CustomerDetailsTest) itr.next();
 System.out.println("testGetCustomerDetails()-successed. retrieved CustomerDetailsTest="+cust.toString());
%>
<%
 //Session for checking whether edit or non-edit mode
 String pageMode = (String)session.getAttribute("CUSTOMER_PAGE_MODE");
 session.removeAttribute("CUSTOMER_PAGE_MODE");
 if(null==pageMode)
 pageMode = "EDIT";
 if(pageMode.equals("EDIT"))
 //display data in the form
 System.out.println("Editable mode");
%>
 <html:form action="/nonedit">
 <tr>
 <td><table width="100%" bgcolor="darkkhaki">
 <tr>
 <td><bean:message key="label.id"/></td>
 <td><%=cust.getCusId()%></td>
 </tr> 
 <td>
 
 <bean:message key="label.Company"/>
 </td> 
 <tr>
 <td><bean:message key="label.cname"/></td>
 <td><html:text property="name" value="<%=cust.getCname()%>"/></td>
 <td><bean:message key="label.cphone"/></td>
 <td><html:text property="phone" value="<%=cust.getCphone()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr1"/></td>
 <td><html:text property="address1" value="<%=cust.getCaddress1()%>"/></td>
 <td><bean:message key="label.cemail"/></td>
 <td><html:text property="email" value="<%=cust.getCemail()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr2"/></td>
 <td><html:text property="address2" value="<%=cust.getCaddress2()%>"/></td>
 <td><bean:message key="label.cfax"/></td>
 <td><html:text property="fax" value="<%=cust.getCfax()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.ccity"/></td>
 <td><html:text property="city" value="<%=cust.getCcity()%>"/></td>
 <td><bean:message key="label.czip"/></td>
 <td><html:text property="zip" value="<%=cust.getZip()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.cstate"/></td>
 <td><html:text property="state" value="<%=cust.getCstate()%>"/></td>
 </tr> 
 <td>
 
 <bean:message key="label.Admin"/>
 </td> 
 <tr>
 <td><bean:message key="label.AAname"/></td>
 <td><html:text property="adminname" value="<%=cust.getAname()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAemail"/></td>
 <td><html:text property="adminemail" value="<%=cust.getAemail()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAphone"/></td>
 <td><html:text property="adminphone" value="<%=cust.getAphone()%>"/></td>
 </tr> 
 <td>
 
 <bean:message key="label.User"/>
 </td> 
 <tr>
 <td><bean:message key="label.AUname"/></td>
 <td><html:text property="adminusername" value="<%=cust.getUname()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AUemail"/></td>
 <td><html:text property="adminuseremail" value="<%=cust.getUemail()%>"/></td>
 </tr> 
 <tr align="center">
 <td><html:cancel value="Cancel"/>
 <html:submit value="Next"/></td>
 </tr>
 </html:form>
<%
 }else
 //display data in the text
 System.out.println("Non-Editable mode");
%>
 <html:form action="/edit">
 <tr>
 <td><table width="100%" bgcolor="darkkhaki">
 <tr>
 <td><bean:message key="label.id"/></td>
 <td><%=cust.getCusId()%></td>
 <td><bean:message key="label.status"/></td>
 <td><%=cust.getStatus() %></td>
 </tr> 
 <td>
 
 <bean:message key="label.Company"/>
 </td> 
 <tr>
 <td><bean:message key="label.cname"/></td>
 <td><%=cust.getCname()%></td>
 <td><bean:message key="label.cphone"/></td>
 <td><%=cust.getCphone()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr1"/></td>
 <td><%=cust.getCaddress1()%></td>
 <td><bean:message key="label.cemail"/></td>
 <td><%=cust.getCemail()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr2"/></td>
 <td><%=cust.getCaddress2()%></td>
 <td><bean:message key="label.cfax"/></td>
 <td><%=cust.getCfax()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.ccity"/></td>
 <td><%=cust.getCcity()%></td>
 <td><bean:message key="label.czip"/></td>
 <td><%=cust.getZip()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.cstate"/></td>
 <td><%=cust.getCstate()%></td>
 </tr> 
 <td>
 
 <bean:message key="label.Admin"/>
 </td> 
 <tr>
 <td><bean:message key="label.AAname"/></td>
 <td><%=cust.getAname()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAemail"/></td>
 <td><%=cust.getAemail()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAphone"/></td>
 <td><%=cust.getAphone()%></td>
 </tr> 
 <td>
 
 <bean:message key="label.User"/>
 </td> 
 <tr>
 <td><bean:message key="label.AUname"/></td>
 <td><%=cust.getUname()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AUemail"/></td>
 <td><%=cust.getUemail()%></td>
 </tr> 
 <tr align="center">
 <td><html:submit value="Update"/></td>
 </tr>
 </html:form>
<%
%>
<%
%>
 </table>
 </td>
 </tr>
 </table>
</body>
</html:html>

u r using action classes. so after calling the insert method in Action Class to a dao... the next statement should be retrieve statement. so at the time of updating first it will get updated.. the next statement it will execute is retrieve and then set these details in VO or FORM and show it on JSP
Message was edited by:
leo_michael

Missing update for a game app after updating ios7 any ideas how to get the update

Went to update a game app this morning, had already hit update when the i os7 update screen popped went through with the ios update but after ipad restarted the game update is completely missing any ideas how to get the update back no luck so far

Hello THEVIN7
The next step if it is not updating, would be to delete the app and then download it again. Check out the general troubleshooting for apps purchased form the App Store.
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/ts1702
Regards,
-Norm G.

I have an older mac and it wants me to update to itunes 10 but my mac is too old and I cant figure out how to disable the update

I have an older mac and it wants me to update to itunes 10 but my mac is too old and I cant figure out how to disable the update so I can use the store.

If Software Update is offering the update then it would be compatible with your model. Unfortunately, you haven't provided us with any information on your hardware that would enable us to determine if it really is too old.
If you really wish to disable the update alert then the next time Software Update opens, select the update in the list then select "Ignore update" from SU's Update menu.

How to solve the problem when opening program illustrator cs6 ERROR: 16 It is WINDOWS 8.1 / 64 BIT help please

how to solve the problem when opening program illustrator cs6
ERROR: 16
It is WINDOWS 8.1 / 64 BIT
help please

Thanks, Jeff! The file Adobe Setup Error.log contains the following information:
02/14/14 07:20:26:474 | [INFO] | | OOBE | DE | | | | 8860 | DEVersion: 5.0.0.0
02/14/14 07:20:26:475 | [INFO] | | OOBE | DE | | | | 8860 | Loading library from C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE5\Setup.dll
[    8860] Fri Feb 14 07:20:26 2014 INFO
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
CHECK : Another Native OS installer already running
Create Required Folders
Assuming uninstall mode
Lookup for master payload
[    8860] Fri Feb 14 07:20:26 2014 ERROR
DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
[    8860] Fri Feb 14 07:20:26 2014 INFO
:: END TIMER :: [Total Timer] took 6.90443 milliseconds (0.00690443 seconds) DTR = 579.338 KBPS (0.56576 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 0 warning(s)
ERROR: DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
Exit Code: 33 - The product is not installed, cannot uninstall.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DW040 ...

How to do the Validations in Report Programming?

How to do the Validations in Report Programming?
how to do screen Validations and Field Validations if posssible can any one send the code regarding the Validation ....
Tks
Durusoju

AT SELECTION-SCREEN - selscreen_event
Syntax
| { ON {para|selcrit} }
| { ON END OF selcrit }
| { ON BLOCK block }
| { ON RADIOBUTTON GROUP radi }
| { }
| { ON {HELP-REQUEST|VALUE-REQUEST}
| FOR {para|selcrit-low|selcrit-high} }
| { ON EXIT-COMMAND }.
Alternatives:
1. ... OUTPUT
2. ... ON {para|selcrit}
3. ... ON END OF selcrit
4. ... ON BLOCK block
5. ... ON RADIOBUTTON GROUP radi
6. ... { }
7. ... ON {HELP-REQUEST|VALUE-REQUEST} FOR
 {para|selcrit-low|selcrit-high} }
8. ... ON EXIT-COMMAND
Effect
These additions allow individual evaluation of specific elements of the selection screens of the program. The information as to which selection has triggered the event is contained in the system field sy-dynnr.
Alternative 1
... OUTPUT
Effect
This event is triggered at the screen event PBO of a selection screen. In the event block, the selection screen can be prepared through assignments to the data objects of parameters and selection criteria and through dynamic screen modifications.
Note
The assignments to input fields in the event block AT SELECTION-SCREEN OUTPUT always affect the selection screen and overwrite the user inputs from previous displays of the same selection screen. Assignments in the event blocks LOAD-OF-PROGRAM oder INITIALIZATION, on the other hand, only have an effect at first program start.
Alternative 2
... ON {para|selcrit}
Effect
This event is triggered at the screen event PAI of a selection screen if the content of the input field of a parameter para or a line of a selection criterion selcrit was passed to the ABAP program. In the event block, the user input can be checked. Sending a warning or an error message in the event block makes the fields para and selcrit ready for input again.
No parameter that is defined as a radio button can be specified. For this purpose, the addition ON RADIOBUTTON GROUP is provided.
Note
If a user action takes place in the dialog box for the multiple selection of a selection criterion selcrit, the entries of the selection table are passed to the program, line by line. For each line, the event AT SELECTION-SCREEN ON selcrit is triggered.
Alternative 3
... ON END OF selcrit
Effect
This event is triggered after the selection table selcrit has been fully passed to the program after a user action in the dialog box for the multiple selection has taken place. In the event block, the entire selection table can be checked.
Alternative 4
... ON BLOCK block
Effect
This event is triggered at the screen event PAI of a selection screen if all the input fields of a block block of the selection screen were passed to the ABAP program. In the event block, the user inputs can be checked. Sending a warning or an error message in the event block makes all the fields of the block block ready for input again.
Alternative 5
... ON RADIOBUTTON GROUP radi
Effect
This event is triggered at the screen event PAI of a selection screen if all the fields of a radio button group radi of the selection screen were passed to the ABAP program. In the event block, the user input can be checked. Sending a warning or error message in the event block makes all the radion buttons of the block radi ready for input again.
Note
The individual fields of a radio button group are not passed individually and do not trigger the event AT SELECTION-SCREEN ON par.
Alternative 6
Effect
The event AT SELECTION-SCREEN itself is triggered as the last event of selection screen processing if all the input values were passed to the program. In this event block, all the user inputs can be checked. Sending a warning or an error message in the event block makes all the screen fields ready for input once again.
Alternative 7
... ON { HELP-REQUEST | VALUE-REQUEST } FOR
 {para|selcrit-low|selcrit-high} }
Effect
The two events ON HELP-REQUEST and ON VALUE-REQUEST are triggered at the screen events POH and POV of a selection screen if - for the input field of a parameter para or one of the input fields of a selection criterion selcrit - the field help F1 or the input help F4 was called. Other selection events are not triggered.
In the event blocks, a self-defined field or input field can be programmed, which overrides any helps possibly defined in the ABAP Dictionary.
Notes
These event blocks can only be implemented for fields of the selection screen that are defined in the same ABAP program and not in a possibly linked logical database.
With the events for the field and input help, no data is transported between the selection screen and the ABAP program. As with general screens, suitable function modules must be used for these. The parameters and selection criteria changed for the input help are transported to the selection screen.
Alternative 8
... ON EXIT-COMMAND
Effect
This event is triggered if the user has called one of the functions Back, Exit or Cancel. In the event block, possible clean-up actions can be executed.
Example
In these executable programs, a standard selection screen and a further selection screen are defined. In the event blocks AT SELECTION-SCREEN, the inputs in the selection screens can be specially handled using the name p_carrid and the screen number in sy-dynnr.
REPORT demo_at_selection_screen.
Global data
DATA: sflight_tab TYPE TABLE OF sflight,
 sflight_wa LIKE LINE OF sflight_tab.
Selection screens
PARAMETERS p_carrid TYPE spfli-carrid.
SELECTION-SCREEN BEGIN OF SCREEN 500.
SELECT-OPTIONS s_conn FOR sflight_wa-connid.
DATA s_conn_wa LIKE LINE OF s_conn.
SELECTION-SCREEN END OF SCREEN 500.
Handling selection screen events
AT SELECTION-SCREEN ON p_carrid.
IF p_carrid IS INITIAL.
 MESSAGE 'Please enter a value' TYPE 'E'.
ENDIF.
AUTHORITY-CHECK OBJECT 'S_CARRID'
 ID 'CARRID' FIELD p_carrid
 ID 'ACTVT' FIELD '03'.
IF sy-subrc = 4.
 MESSAGE 'No authorization for carrier' TYPE 'E'.
ELSEIF sy-subrc <> 0.
 MESSAGE 'Error in authority check' TYPE 'A'.
ELSE.
 IF sy-ucomm = 'ONLI'.
 CALL SELECTION-SCREEN '0500'.
 ENDIF.
ENDIF.
AT SELECTION-SCREEN.
IF sy-dynnr = '0500'.
 IF s_conn IS INITIAL.
 MESSAGE 'Please enter values' TYPE 'W'.
 ELSE.
 SELECT *
 FROM sflight
 INTO TABLE sflight_tab
 WHERE carrid = p_carrid AND
 connid IN s_conn.
 IF sy-subrc <> 0.
 MESSAGE 'No flights found' TYPE 'E'.
 ENDIF.
 ENDIF.
ENDIF.
Main program
START-OF-SELECTION.

How to increase the performance of a program

How to increase the performance of a program.
Regards
Lisa
Message was edited by: Lisa Roy

Here are some links that may help.
http://www.sapinsideronline.com/searchspi/search.htm?page=article&key=20297&query_text=performance%7Ctuning
http://www.sapinsideronline.com/searchspi/search.htm?page=article&key=44221&query_text=performance%7Ctuning

How can show the result of a measuring that is done in a sub-program in my main panel?

How can show the result of a measuring that is done in a sub-program in my main panel?

In your subvi, wire the result(s) you want to ouput to the main program to an output terminal on the connector pane.
For a tutorial on subvi's, search the help for "connector panes" anc click on tutorial.
~Tim

I lost my redemption code to install Lion onto my new computer. Is there a way I could get it again? When I go to the "get the update" page, it says that my serial number already has a code. How do I find this code again?!

I lost my redemption code to install Lion onto my new computer. Is there a way I could get it again? When I go to the "get the update" page, it says that my serial number already has a code. How do I find this code again?!

It is probably broken. You can try restoring it using Recovery Mode, but if that fails its time for a new phone. After all, it is 4 generations out of date. See: Recovery Mode

Is Adobe Acrobate Pro 9 still supported? Are the updates to this program being uninstalled by Adobe

Is Adobe Acrobate Pro 9 still supported? Are the updates to this program being uninstalled by Adobe

Hi Kent,
http://helpx.adobe.com/acrobat/kb/end-support-acrobat-8-reader.html may help,
Thanks!
Eshant

How to debug the method in abap program

How to debug the method in abap program ?
Could you please give the solution.
Thanks
sai

Hi ,
Place break point at call method .
It takes u in to the method implementation .
Here u can analyse the method implementation ...
Reward if useful
Thanks
Jagadeesh.G

I purchased a powermac pro and it came with logic Pro 9 (but with out the additional suite of programs that comes with). How can I reregister or reinstall Logic Pro 9 to get those features?

I could really use some insight into this please also how many gigs of RAM should my power mac have it only has two right now and logic tends to glitch up majorly.

My original question :
I purchased a powermac pro and it came with logic Pro 9 (but with out the additional suite of programs that comes with). How can I reregister or reinstall Logic Pro 9 to get those features?

How to terminate the update of a program that is locked up?

Similar Messages

Maybe you are looking for