How to test after commenting unnecessary service in /etc/inetd.conf

Hi All,
I have a requirement to comment all unnecessary services listed below in /etc/inetd.conf file.
Pls suggest a test scenario which shows that these services are disabled after commenting
The list of unnecessary services are :
echo stream tcp6 nowait root internal
echo dgram udp6 wait root internal
discard stream tcp6 nowait root internal
discard dgram udp6 wait root internal
daytime stream tcp6 nowait root internal
daytime dgram udp6 wait root internal
chargen stream tcp6 nowait root internal
chargen dgram udp6 wait root internal
comsat dgram udp wait root /usr/sbin/in.comsat in.comsat
talk dgram udp wait root /usr/sbin/in.talkd in.talkd
uucp stream tcp nowait root /usr/sbin/in.uucpd in.uucpd
finger stream tcp6 nowait nobody /usr/sbin/in.fingerd in.fingerd
rstatd/2-4 tli rpc/datagram_v wait root /usr/lib/netsvc/rstat/rpc.rstatd rpc.rstatd
rusersd/2-3 tli rpc/datagram_v,circuit_v wait root /usr/lib/netsvc/rusers/rpc.rusersd rpc.rusersd
walld/1 tli rpc/datagram_v wait root /usr/lib/netsvc/rwall/rpc.rwalld rpc.rwalld
sprayd/1 tli rpc/datagram_v wait root /usr/lib/netsvc/spray/rpc.sprayd rpc.sprayd
name dgram udp wait root /usr/sbin/in.tnamed in.tnamed
bootps dgram udp wait root /usr/sbin/bootpd bootpd
Thanks
gattu

How to turn your computer into a Virtual (Personal)Router.
Our hotel the Grand Oasis Cancun provided internet for only 36 hours and you could only use it on one device which comes to my next option as using your Laptop as a Personal Router to broadcast WiFi to any devices near your computer. Our room was on the Second level of the Pyramid at Grand Oasis and I was able to access it while at the VIP lounge below our room. Before our supposedly free internet service ended.
I attempted using the hotel next door since I was getting a good signal from the Omni Hotel. They offered complimentary 24hr internet access using your browser as a way to track your use. Once you find the signal of the Omni it will open your browser I used Google Chrome, after it opens you go threw a few simple steps and your ready.
I learned that after the 24 hours are up all you have to do is disconnect from their network, just run Ccleaner(free program) then find the Signal of the hotel and you will be given another 24 hours. What Ccleaner(<--download there) does is clears anything attached to your browser ie cookies temp files etc. it cleans your browser history giving you a way of not paying for the hotel fee of internet and giving you free WiFi. this is only if you are next to the Omni hotel :).
What you need to download to turn your computer into a hotspot need to say is this little easy to use program Virtual Router. Once it has download test at your home to make sure it works with you devices. This will work with Tablets, Phones and other computers that cant find the Omni WiFi signal. Your welcome. To use it, is simple. Open program>make a password>select WiFi and start VR.

Similar Messages

How to test/consume asynchronous web services in SAP?

Hi,
How do we test/consume asynchronous web services in SAP - either version 4.7 or ECC6.0?
TIA,
Regards
Deepthi

Go through the following link to know how to consume web services using ABAP:
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/media/uuid/20eb3174-41ab-2a10-a383-907faf60eed3|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/media/uuid/20eb3174-41ab-2a10-a383-907faf60eed3]
Regards,
Siva.

[SOLVED] How Can I Stop DHCPCD from Overwriting my /etc/resolv.conf...

Hey guys,
For some unknown reason /etc/dhcpcd.conf continually overwrites my /etc/resolv.conf file, eventhough I set the "nohook resolv.conf" hook in /etc/dhcpcd.conf.
This is screwing up my DNS and intermittently creating connection problems. Any of you guys know why the hook is not taking effect or how I can stop dhcpcd from overwritting this file?
Thanks
Last edited by w201 (2013-03-18 19:05:15)

drcouzelis wrote:
w201 wrote:I set the "nohook resolv.conf" hook in /etc/dhcpcd.conf.
kaszak696 wrote:
dhcpcd's configuration file may be edited to prevent the dhcpcd daemon from overwriting /etc/resolv.conf. To do this, add the following to the last section of /etc/dhcpcd.conf:
nohook resolv.conf
I don't think that information will help w201...
I changed my DNS to the Google one (8.8.8.8 or something). That's in "resolv.conf", isn't it? I remember editing some OTHER configuration file, which is then read to create the "resolve.conf" file. There it is, in that link to the wiki, under "Use resolv.conf.head". Does that help you do what you want to do?
There's three techniques at the wiki link, the nohook one, the resolv.conf.head one and the write-protection attribute.

How to test a Java Web Service locally?

I developed simple java web services.
Now I want to test them locally.
I want to expose my web service through my Web Server(Tomcat).
How can I expose that webservice?
After that I want to access my web service through a Internet Browser.
Is it possible to test that web service locally (localhost)?
My computer is not connected to a network or internet.
My OS is Windows XP Professional.

I just set up TCPMON. Considering it is free and the fact that it has more than just a basic UI, I am quite impressed. I also use SOAPscope, which is another great tool, but I am looking for a free option.
My issue: I set up TCPMON to sniff messages sent over HTTPS through port 8080. But I am getting encrypted messages upon sending the SOAP request as follows:
�b�b�b�bvC�Ym�)f��OvC�Ym�)f��W�O�k�v�W��dQ�$�{� �4��F���vO��XEC
)��~9gl^�OvC�Ym�)f��W�O�k�v�W��dQ�$�{� �4��F���vO��XEC
)��~9gl^�OvC�Ym�)f��W�O�k�v�W��dQ�$�{� �4��F���vO��XEC
)��~9gl^�
Any clue why?
Your help is greatly appreciated.
Aish

Stop some unnecessary services when system boots

how can I stop some unnecessary services when system boots? I tried to find this function in the control center, but it looks we can modify the services list directly in the control center.

edit the DAEMONS= line in /etc/rc.conf

SOL10: Services that were in inetd.conf ?

What happened to these services that were in /etc/inetd.conf and are not now in SMF? tftp, netstat, dummy, ufsd, cachefsd, dtspcd, sadmind, kcms_server, amiserv, rpc.cmsd, name, systat, rpc.ttbdserverd, fs, printer,rpc.smserverd.

For example tftp, in man pages, you have:
svc:/network/tftp/udp6:defaultyou can go ther too:
http://docs.sun.com/app/docs/doc/816-5166/6mbb1kpt0?a=expand

How to test swaref web service method

My simple web service method:
     @WebMethod
     @XmlAttachmentRef
     public DataHandler getFile() {
          FileDataSource file = new FileDataSource("c:\\1.gif");
          DataHandler handler = new DataHandler(file);
          return handler;
the generated wsdl codes:
*<xs:complexType name="getFileResponse">*
*<xs:sequence>*
*<xs:element minOccurs="0" name="file" type="swaRef:swaRef" />*
*</xs:sequence>*
*</xs:complexType>*
I always use Eclipse web service explorer to test web service, but it doesn't support swaref web service method.
Then I use axis WSDL2JAVA to generate web service client, but the generated "getFile" return type is not "DataHandler", but "org.apache.axis.types.URI".
How to test swaref web service method?
Thanks
Edited by: tomsonxu on Jan 8, 2008 7:40 AM
Edited by: tomsonxu on Jan 8, 2008 7:41 AM

Hello..
How did u develop the webservice?
I mean did u develop the Webservice using Enter prise Java Bean....
Wrap EJB in ear and deploy to the Server and now u can test the EJB method
whether it is working fine or not
Try these -
http://help.sap.com/saphelp_nw04s/helpdata/de/f7/af60f2e04d0848888675a800623a81/frameset.htm
Inorder to use the webservice in the Webdynpro, normally we will use the WSDL of webservice
and Import the model using any one of them
After importing as model we can use the EJB methods!
Try it !!
Thanks
Shravan

How to test an Enterprise service?

Hi Experts,
Iam very new to this Enterprise Service. I need to test an Enterprise service from my ABAP system.
What is the Pre requistics to test the Enterprise service?
What is the necessity of WS Navigator ,SOAPUI and SOA Manager?
Is SOAP UI need seperate license?
Can you refer documents that has steps to test a Enterprise service from scratch?
Iam in ECC 6 and my system donot have Java stack.
I can locate my service in SOA Manager , I couldnt figure out how to test it?
Help me..
Regards
Karthiheyan M

Hi Karthiheyan,
Start with this very comprehensive end-to-end guide, Enterprise SOA Development Handbook 1.1:
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40db4735-02f9-2a10-b198-a888a056bb67?quicklink=index&overridelayout=true]
The guide above will help you understand most aspects around Enterprise SOA / Enterprise Services in SAP. The important thing to understand is that SAP Enterprise Services are shipped in an implemented state but they are not configured, so may exist in ECC 6.0 but can't be used until you configure (setup binding & authorization profiles etc.) & this is where SOAMANAGER is used - Configuration of the web service for use.
WS Navigator & SoapUI are webservice test tools. WS Navigator is shipped with any SAP Java stack & SoapUI is a free test tool. So, once you've configured your webservice for usage, use the URL (with binding) in WS Navigator or SoapUI to test your webservice.
Regards, Trevor

How to test alert mechanisum after checking., Suppress Multiple Alerts of this Rule.

Hi Experts,
Currently, Suppress Multiple Alerts of this Rule. condition is not checked, now its checked to avoid dulicate alerts.
Please let me know how to test this conditon?
Thanks,
Thrilok Chandar

make the message fail in PI for example 3 times, and check if you get 3 alerts.
you won't get 3. after one you have to confirm the alert then only you will get another consecutive one.
for that go to alert inbox and complete the alert and check if you get the alert or not.
if you don't check Suppress Multiple Alerts of this Rule no need to do above activity.

How to start CRS and other services after rebooting nodes.

Hi,
i have created two node cluster database.how to start CRS and other service after rebooting nodes?
Thanks,

use crsctl command start...
$ORA_CRS_HOME/bin/crsctl start crsOr check status about CLusterware...
$ORA_CRS_HOME/bin/crsctl check crs
CSS appears healthy
CRS appears healthy
EVM appears healthyIf not OK... check log at $ORA_CRS_HOME/log/hostname/*
and check status database , service and etc...
use crs_stat
$ORA_CRS_HOME/bin/crs_stat -t
$ORA_CRS_HOME/bin/crs_stat if you find some service or instance ... not online...
use srvctl command, help to start
Get Help...
$ORA_CRS_HOME/bin/srvctl -h

How to test RESTful service?

Hello Everyone!
Working on APEX REST services, my query is in regard with the below link:
http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35128/restful_svc.htm#autoId6
In the above link, heading '5.5.2 Retrieving Data Based on a Parameter (employees/{id})' -> points from 1. -to- .8 are covered.
Stuck on point '9. Click Set Bind Variables.', I cannot find this link on that page under my Development environment Application Express 4.2.0.00.27.
Kindly help to locate this link so that I can test my service?
For more clarity, please click below image link
http://www.oracle.com/webfolder/technetwork/tutorials/obe/cloud/dbservice/restfulws/images/t2_02.jpg
The mouse cursor is placed at the end of the page on one of the two buttons 'Test' & 'Set Bind Variables', my development environment doesn't show these buttons. Anyone know why is this happening?
- Krishna Vashistha

Okay, I have got this sort out on my own.
For the record, you must update you apex listener with new release apex_listener.2.0.5.287.04.27, which supports RESTful services. By updating you will see those two missing buttons 'Test' & 'Set Bind Variables', to test your newly created service.

How to test the payload in XI

Hi all,
could please explain how to test the payload in xi and with steps.
Thanks in advance,
Radhika

Hi Radhika,
You can test in three ways.
1.) In message mapping directly give the relevant data and then execute. Here you can test whether the mapping is correct or not.
2.) In Integrstion Directory after completing and activating the Configuration, in tool you can find the Test Configuration tab. There you can give the sender and receiver details along with payload. Here you can test whether the Configuration is correct or not.
3.) In RWB in COmponent monitoring. Select the Integration Engine Monitoring. Here give the sender and receiver details, Interface name, name space, Quality of service.
Now give user name and pass word.
Paste the payload from massage mapping and then press test tab. Here yoyu can directly send the message from XI server to the receiver system.
Ok,
Jeevan

How to Remove & Re-Enable Web Services on LaserJet printers supporting ePrint

If your LaserJet printer has been disconnected from or failed to connect to Web Services, you may need to power cycle your printer to reconnect. If that does not resolve the problem, you can remove web services, wait 30 seconds, then re-enable web services to re-establish your connection to ePrint and Print Apps. Note: this last step will result in a new email address being assigned to your printer.
How do I remove HP Web Services for my LaserJet printer?
Print a configuration page from your product, and locate the IP address.
At your computer, open a Web browser and type the product IP address into the address line and press Enter. The HP Embedded Web Server opens.
Click the HP Web Services tab.
Select the option to disable Web Services.
How do I enable or re-enable HP Web Services for my LaserJet printer?
To use HP ePrint, you must first enable HP Web Services. Re-Enabling Web Services uses the same procedure as enabling the Web Services.
Print a configuration page from your product, and locate the IP address.
At your computer, open a Web browser and type the product IP address into the address line and press Enter. The HP Embedded Web Server opens.
Click the HP Web Services tab.
Select the option to enable Web Services.
When Web Services are enabled, ePrint information appears in the HP Embedded Web Server. Look for the e-mail address that is automatically assigned to the product. The product also prints an HP Web Services information sheet that contains this e-mail address and instructions
If you were unable to register your printer in www.hpeprintcenter.com within 24 hours of printing your information sheet, you must re-enable the printer code by reprinting your information sheet. The information sheet will also provide your email address if you have forgotten it.
How do I print the Web Services Information Sheet for my LaserJet printer?
You can only add the printer to your HP ePrintCenter account within 24 hours after printing the information sheet. You can re-print the information sheet at any time from the printer control panel.
Print a configuration page from your product, and locate the IP address.
At your computer, open a Web browser and type the product IP address into the address line. The HP Embedded Web Server opens.
Click the HP Web Services tab.
Click the Print Information Sheet button.
I am an HP employee.

To help improve the organization and information sharing in this forum this post/discussion has been closed and replaced.
Please see this post: <link to new “Enable Disable Web Services on your printer” post.
If after reviewing the post above you still have questions/issues with your web-connected printer, you can either review and comment in existing posts in this forum that report issues like yours, or if necessary start a new post requesting assistance.
Miles
HP Employee

How to test flash remoting?

I am using cf 7.0.2.I want to use coldfusion remoting.
Please let me know if I need install other software and how
to make it work.
I also need to know how to test the function.Thanks
Mark

mark416 wrote:
> I am using cf 7.0.2.I want to use coldfusion remoting.
>
> Please let me know if I need install other software and
how to make it work.
>
> I also need to know how to test the function.Thanks
>
> Mark
flash remoting is built-in in CF7, and unless you need to
enable
integration of webs services, you do not need to change
anything
to test if fr is enabled, just go to
http://localhost/flashservices/gateway
- if you see a blank page in
response you are good to go
you will obviously need MM/Adobe Flash to make flash movies
that
get/post data with remoting... keep in mind, though, that
flash
remoting components were included with Flash only up to ver 8
(Flash CS3
does not have them at all, since it uses a different approach
altogether; though you can still make it work with components
for
previous flash versions, it is a bit of a PIA...)
i am sure others will add a lot to this (i am just a casual
flash
remoting coder/user - it is not my sharpest knife...)
a few websites that helped me get going were:
http://www.asfusion.com/blog/entry/remoting-for-coldfusion-flash-forms
(and a lot of other pages in that blog + read comments too!)
http://articles.techrepublic.com.com/5100-22-1050210.html#
http://blog.vixiom.com/2007/04/17/actionscript-20-flash-remoting-with-flash-cs3/
http://www.builderau.com.au/program/web/soa/Consuming-Web-services-in-Flash-MX/0,339024632 ,320282917,00.htm
hth
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com

How bad is the Verizon customer service?

how bad is the Verizon customer service? Well let me tell you. I just got off the phone with from their Finance Department, who called me, and they asked when I would be paying my bill. I answered never. He asked why. I said I had a billing dispute. He asked to go over the bill together (the first rep to do this) having going over the issues and reviewing the notes he said “oh wow”. I informed him that I filed a complaint to the BBB, FTC and FCC and filed a small claims suit against them. He said he understood why. He then said he would unsuspended my 3 lines (I have already disconnected 2 of them) and place my account in a “billing dispute status”. I said thank you. After about 30 minutes I called back when my saw my lines still suspended. Both the finance department and customer service both said the lines were still suspended both blaming the other department as a reason. Got to love the Verizon teamwork. Any suggestions?

They may have stated over the phone your account was in a "billing dispute status" however you can ONLY do so in writing.
From the customer agreement:
HOW AND WHEN CAN I DISPUTE CHARGES?
If you're a Postpay customer, you can dispute your bill within 180 days of receiving it, but unless otherwise provided by law or unless you're disputing charges because your wireless device was lost or stolen, you still have to pay all charges until the dispute is resolved. If you're a Prepaid customer, you can dispute a charge within 180 days of the date the disputed charge was incurred. YOU MAY CALL US TO DISPUTE CHARGES ON YOUR BILL OR ANY SERVICE(S) FOR WHICH YOU WERE BILLED, BUT IF YOU WISH TO PRESERVE YOUR RIGHT TO BRING AN ARBITRATION OR SMALL CLAIMS CASE REGARDING SUCH DISPUTE, YOU MUST WRITE TO US AT THE CUSTOMER SERVICE ADDRESS ON YOUR BILL, OR SEND US A COMPLETED NOTICE OF DISPUTE FORM (AVAILABLE AT VERIZONWIRELESS.COM), WITHIN THE 180–DAY PERIOD MENTIONED ABOVE. IF YOU DO NOT NOTIFY US IN WRITING OF SUCH DISPUTE WITHIN THE 180-DAY PERIOD, YOU WILL HAVE WAIVED YOUR RIGHT TO DISPUTE THE BILL OR SUCH SERVICE(S) AND TO BRING AN ARBITRATION OR SMALL CLAIMS CASE REGARDING ANY SUCH DISPUTE.
Simply send in a notice of dispute form. Since you have already filed a "small claims case", I would think it may be unnecessary, though, but it can't hurt to be thorough.

How to test after commenting unnecessary service in /etc/inetd.conf

Similar Messages

Maybe you are looking for