How to test custom idoc

Hi
In case of standard Idoc's ( e.g MATMAS) we have transactions like BD10 to post the material. And we can check status of idoc at we05/02. so this way we can check our idoc-xi-file scenarios. Suppose if I got to work with custom idoc's ......and where we didn't have default transactions to post of the idocs.....how we are going to test the scenario initially ??
thanks
kumar

Hi Palnati,
Test the population of the custom IDOC
via wedi IDoc - Display IDoc or Transaction WE02.
Enter your message type and execute.
Status should be green, double click on one of the Idocs you have created to view its contents.
If a problem has occurred click on Status which will give you a description of the error.
Drop down Data Records arrow and this should list the data in the IDoc in the correct hierarchical structure.
Click on each individual segment and view the content to check that the correct data has been read.
If you have UNIX access by using AL11 you can view the file that you have created.
<b>for details...watch this below thread...</b>
Re: idocs
Regards,
Ramana Kumar. A

Similar Messages

[IDOC] Test customized IDOC

Hey,
created a customized IDOC in system A and added an inbound
process code.
Now I would like to test the IDOC in we19 from system B, but the customized
IDOC doesn't exist (of course) there.
How to test this IDOC? Do I have to transport this in system B?
Can I test IDOC also in system A himself? I just want to test if the configuration
of process code works.
In system A I can use we19 with standard inbound, but which receiver port do
I have to use? I just have created a port to system B. For testing IDOC in just
one system, do I have to create also a port/logical system to system A?
thanks
chris
Edited by: Christian Riekenberg on Jul 8, 2008 4:18 PM

I think you want to test only the process code calling the IDoc inbound function module correctly or not?
If you have RFC connection between B to A. then go to WE19 create a dummy entry giving all the following details
Receiver                            Sender
Port                                Port
Partner No.                         Partner No.
Part. Type                          Part. Type
Partner Role                        Partner Role
Message Type
and check in system A that IDoc you got received. It will show as an error , but that errors should shows it getting created in the inbound function module call
a®

How to import Custom idoc into IR?

I have a custom idoc and i need to map it with the receiver format after importing into IR . Please let me know the sequence of steps to import custom idoc into Integration repository?
I think I need to first import into IDX2 and then import into repository. Am I correct?

Hi Prateek,
thanks for the information .The normal standard idocs we import by searching the idoc eg- for importing matmas we type mat and we search it, since it is a standard idoc it will be available in the list (after selecting the chek box "Import of idoc or rfc interfaces from sap system permitted").
But my question is how we import custom idoc as they wont be present in the list?

Regarding how to create custom IDOC?

hi experts:
       thank you all in advance for all your answers . .
       I am studying Idoc, Would you please give me an example about how to create custom IDOC , and the basic idea, what's more , give me some material I can refer to . couldn't thank you more
       Best regards
       Frank

Steps To Create Custom IDOC
1.Create Segment Type (WE31)
Go to Transaction code WE31
Enter Segment type, click on Create
Give Description
Enter the Necessary Fields & Data Elements for those Fields.
Save the Changes.
2.Create Idoc Type (WE30)
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
3.Create Message Type (WE81)
Go to transaction code WE81
Change the details from Display mode to Change modenAfter selection, the system will give this message The table is cross-client (see Help for further info). Press EnternClick New Entries to create new Message Type
Fill details
Save it and go back
4.Assign Idoc Type to Message Type (WE82)
Go to transaction code WE82
Change the details from Display mode to Change moden After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
You will get step by step process.
ABAP Development
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.geocities.com/xplosion78/customised_ALE_IDOC_BY_SACHIN_DABHADE.zip
http://help.sap.com/saphelp_45b/helpdata/en/35/b0ea5187a62488e10000009b38f9b7/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/c4/6bc368fef411d28d0900104b56737d/frameset.htm
ABAP Development
Follow below steps to create custom IDOC.
1.Create segments through transaction WE31.
2.Create IDoc Type through transaction WE30 by attaching created segments.
3.Message type through transaction WE81.
4.Link Idoc and message type in WE82 transaction.
Check the transaction WEDI for ALE settings
Check these links for more details on IDoc's:
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
ALE/ IDOC/ XML
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
IDOC Convertion
/people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment
http://www.intelligententerprise.com/channels/applications/feature/archive/kasturi.jhtml
i need a sample code regarding to create a custom IDOC...
Reward points...

How to Test, Inbound idoc ,with out the Sender System, using a Text File

Hi Guru's .
we wanted to test BLAORD03 inbound idoc (Message Type BLAORD).with out the SENDER SYSTEM.
on the same client.
we wanted to test this idoc with text file from our local machine.
Can anyone give us detail steps.like how to create File layout
with Segment name,and values for the fields.how to pass this file to the system.
Thanks in advance.

Hi Aparna.
My requirement is to test the idoc with Inbound File.
Generate a file with the data entered through segments through we19 ,and use the same file for processing through we16.
when i am trying to do this syst complaing about
Partner Profile not available, and some times
port not available. and some times with
'No further processing defined'.
but i maintained part profiles and port perfectly.
Can you help me in testing with test 'File' port.

Material on how to create custom idoc and how to distribute it

hi friends,
can anyone suggest me some good material on custom idoc and how to trigger them.
please let me know.
regards,
roberts.k

Please check this link.
http://help.sap.com/saphelp_46c/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
Cheers,
Ramki.

How to Invoke custom Idoc for a sales order

How to create/invoke a custom Idoc when a service order(IW31) IS-U is created or modified ?

Hi Senthil,
You can use the output determination technique for this,
so when ever it got created this out put will be trigered and configure your partner profile also in the similar way.
Regards,
sasi

How to test outbound IDoc?

Hi all,
How do you test an outbound ASN (Delivery document Idoc type DELVRY03). I think first you create an outbound delivery using VL03n and then create an idoc out of it (how?)
Thanks,
Charles.

You have to create delivery at VL01N Transaction,now setup output type
In second screen of Delivery -> Extras->Delivery output -> header ->give the proper output type ,Medium should be 6(EDI) or ALE (A).
click on further data -> send immediately.
when you save delivery ,it will create IDOC automatically,you can see IDOC in WE02 or WE05 Transaction.
Debugging outbound :
keep the break point in outbound Function module
Create Delivery
here when you maintain output type -> further data ->
Now click on Further data ->select peridoc scheduling-> back and save it.
Run RSNAST00 Program
Output application : V2
Object key : Delivery number
Output type : LD00
Medium = 6(EDI) ,A (ALE)
when you execute the program and it will goto debugging.
Thanks
Seshu

How to test custom UI applications in CRM 5.0

Hello Experts,
In CRM 5.0 how can I run and test my own stand alone test UI components?
I have created one test Z application and created a couple of views in it.But when I open the application using bsp_wd_workbench it says "No initial page defined for the application; Testing is not possible".
How can I define an initial page and run my test application.
Your help will much appreciated.
Thanks & Regards
Anupam

Hi Anupam
I think you need to review the IC Webclient Consultants Cookbook. It gives example sof what you're discussing.
Regards
Arden
Reward with Points if Helpful

Creating custome idocs

hi all
I am XI consultant
i want to send IDOC to XI server using ALE..but the IDOC is not present ....the master data is stored in standard sap tables but for them idoc is not present ...so i want to create custom idoc and using change pointer i can send it across ...is this a write approach...? Also please give me the procedure for the above approach as i dont have idea about how to create custome idoc and send it using change pointer
thanks
Sheetal

Hi
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
Reward points if useful
Regards
Anji

Testing custom function modules

Hi Friends ....
As I am new to ABAP testing , I need help in knowing how to test custom function modules .
Below is how I am trying :
Step : 1 -- > Open Tcode SE37
Step : 2 --> Display the function module
   Step : 3 --> Do its syntax check.....activate it..... execute it
   What if no test data is available???
I am trying to execute directly where it gives a return parameter for some function modules saying No Entry \ No data available for this ID etc.,
I am in a confusion whether its correct or not
I want some ideas regarding this
                             - Swapna

>
Swapna Vadlamani wrote:
> Hi Anupama...
>
>   Thank u a ton for the quick reply...but I have another doubt..if I execute without giving any selection parameter data...it says
>
>   No data stored for in the selected period
>
>                                 -Swapna
Ok, so that is what it does if you don't pass it any selection parameter data - I doubt very much if that is how it will be used in Production. Any function module is just a bit of code that does what it has been programmed to do; to test it you just need to find out what it is supposed to do from whoever has asked for it to be built and then check that it does it. If there is no test data set up, then you'll need to find out from your functional consultant how to set some up or get them to set it up for you.

How to Assign a function module for customized IDOC

Hi,
I have created a customized IDOC. Can any body explain how to assign a FM for customized IDOC? Is same IDOC can be used for both Outbound and Inbound Process? In WE41 and WE42 we have to give the outbound and inbound function module name. can we give same function module? Is process code is same for both outbound and inbound process?
Valuable suggetions are appreciated.
Regards,
Ram

Hi ,
Here is the Procedure for the Inbound Idoc Funtion Module
Function Module : SE37
Message : WE81
Assign message : WE82
Assgin FM : we57
Process Code : WE42.
Assign Partner Profile - WE20,
To test the Inbound IDOC.
In WE19, Give the IDOC number & execute ... then put the cursor on the idoc control record . then click on the Standard Inbound push button on the application tool bar.it will show show all the details like partner no,type , message type , process code & function module name ...
now put a break point in the function module .. & debug .
if u r using customised inbound function module , then click on inbound function module .. there u will get a pop screen with FM name & debugging option in both background & foreground mode...
Reward Points if it is Useful.
Thanks,
Manjunath MS

How to create customized long text in IDOC status record in WE02?

Hi,
In WE02 you can see the status of the idoc. If you double click on the short text that is coming in the status, you can see the long text. How do i customized my long text to that screen?

To create a message long text in SE91:
    1. Place the cursor on the corresponding message.
    2. Click the Long text pushbutton.
    3. Enter the long text.
    4. Save the data.
Edited by: YTL on Jun 27, 2011 5:51 PM

How to Test IDOC WPUUMS01

Hi All,
I've created a sample idoc file of type WPUUMS01 to upload to IS Retail. I just don't know where to test. I was using WE19, test tool for IDOC processing but Im having a hard time figuring out the errors in my IDOC since it automatically overwrites my file.
Any suggestions on how to test or how to use WE19?
thanks so much.
Kenny

Hi Kenny,
In WE19:-
1.     Select the radio button Basic Typ and enter WPUUMS01
2.     Execute
3.     You will get a template Idoc.
4.     Read the file and input the data manually to the Idoc. Double click the segment name, the fields will be displayed and you can enter the data. Be carefully and enter the data in the correct segments and in correct order. The values which are not present should not be entered. Enter data relevant for one Idoc only.
This way you will populate one Idoc and then you can test.
Hope this is helpful.
Regards,
Sameena

How to check IDOC Serialization for custom idoc

In one of my interfaces, we are receiving idocs ARTMAS, INFREC, COND_A and ZMD_ARTHIER in ECC system.Last one is customized one in which basically we have to assign one article to an article hierarchy. So this idoc will contain only article no, hierarchy id and node level in which article will be assigned.
Now here we have to implement idoc serialization so that if ARTMAS in any case fails then INFREC, COND_A and ZMD_ARTHIER idocs should not be posted. We will be using RBDSER04 program for inbound processing.
My concern is that whether we have to do any special coding for serialization check in custom function module for the last idoc ZMD_ARTHIER.
If yes, please please let me know how to do handle that in custom inbound function module.
Edited by: suman pandit on May 19, 2009 10:47 AM

Hi,
you need to create a serialization group (in customizing) and assign all the IDocs (in specific order) to this group incl. your custom IDoc.
When data is transfered first a SERDAT01 IDoc will be sent, after this your IDocs have to follow in specific order. At last again a SERDAT01 follows and triggers the processing in the destination system.
Regards,
Kai

How to test custom idoc

Similar Messages

Maybe you are looking for