How to test my system?

Ok, I finally have my system working:
XP 2400+
MSI K7N2 Delta
512Mb PC3200 OCZ Performance
MSI FX5600-VTDR128
HD 80Gb Maxtor Diamond Plus 9
From my point of view, it's a beautifull system And it let's me upgrade my processor from time to time
Now, I want to test my system, to see how much it can give, what soft do you recommend?, and where can I get it?
Best Regards,
Fernando

Fernando,
Glad to here your up and running, nice rig! Here is a link for you where you can find some benchmarking programs. http://www.majorgeeks.com/download.php?id=4 Enjoy your machine. )
Rob

Similar Messages

How to test operating systems

Hi!
I need to test operating systems (windows/MAC) on runtime of AIR application?
You can help me?
Thanks!

Hi Leonardo,
I hope I understood your problem right and I hope that this link will be of help: http://livedocs.adobe.com/flex/3/langref/flash/system/Capabilities.html
With best regards,
Barna Biro

How to test security system on macbook pro 2009 13"

Hello guys!
I would love to know how can i test my apple macbook pro 13" security system?. I also want to know if its safe to have limewire running on the macbook pro?. Will this macbook notify me of any online security threats?. Thank you!!

Download and run the freeware ClamXav if you can't shake the habit of checking for malware every week. After you've wasted fifteen or twenty hours running it a dozen times and finding nothing, you'll realize you're just being paranoid.
To date there are no (zero) viruses that can infect Mac OS X. The only way you could have a trojan on your Mac is if you entered your admin password to allow it to be installed.

How to test system down in XI? Kindly help!

Hi Experts,
    I have a JMS -> XI ->SAP R/3 scenario.
    If the remote SAP R/3 is down then I have to trigger an alert.
    In the runtime workbench, i have configured the alert in Alert Configuration.
    In this I have given the alert category, receiver service, interface and namespace.
    How do I test the system down scenario without actually making the system down?
I have tried to test it via runtime workbench test tool and stopping the receiver communication channel. But SXMB_MONI shows the message successfully processed.
   Why the XI message is not in error?
   How do I actually test this scenario?
   Kindly help me!
Thanks
Gopal

> 1. The report RSARFCEX to restart this message from
> SM58.
Correct.
> 2. Executing report RSQIWKEX restarts errored msg in
> SXMB_MONI.
It restarts the error messge from the Queue in SM58. If the message is deleivered successfully from Sm58, the message in MONI gets updated. It does not restart the message from MONI.
> 3. Msgs are processed in tRFC queues only in IDOC
> scenarios.
Ths blog has answers ,
/people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
<i>Further in asynchronous communication, the calls can be executed either by tRFC (Transactional RFC) or qRFC (Queue RFC). In tRFC, RFC calls are stored in database along with corresponding data under a unique transaction id (TID). However in tRFC, LUW (Logical Unit of Work) are executed independently of each other and the sequence specified by sending application is not maintained. And this particular requirement leads to qRFC communication wherein all LUWs are processed in the same sequence as determined by sending application.</i>
Not only Idoc's used by other Interfaces as well.
Regards
Bhavesh

How to test if remote R/3 system (Receiver) is down in case of Async RFC ?

Hi Experts,
How to test if remote R/3 system (Receiver) is down in case of Async RFC call? There is no BPM as well. I have configured an alert category and created a rule in runtime workbench's Alert Configuration for the specific inbound interface.
I have tried by stopping the channel and also by changing the server name in the communication channel but all in vail. XI still shows message successfully processed.
Kindly help me
Thanks
Gopal

Hi,
How to test system down in XI? Kindly help!
Have answered here as well.
Meanwhile, you would have an error in the receiver RFC adapter in Comm Channel Monitoring.
Maybe you change another RFC adapter rather than the one being used in the receiver agreement.
regards
Bhavesh

How to test System Alias

Hello,
How can I test a R3 system alias?
- System Landscape Cockpit did not bring any results.
- Support Desk >> SAP application requires transaction.
Is there an easier way?
Regards,
AAAttar

Thanks Senthil for the details,
We are on EP6 SP2 at this point. Standalone (DEV) portal installation, and SAP Dedicated system (not Load-Balanced, ie No message server). I've create a test system to SAP_BW, with WAS info. When I tried to test the system in Landscape Cockpit, (selected the test SAP_BW system and JCO) I got NO results. I hope I'm not missing a thing.
Few hours later, I created SAP role trasfer iview for testing, and this is what I got for this SAP_BW Alias:
[The installed version of the portal plug-in must be 6.0 or higher], pretty obvious!
For the other system I got, [Connect to SAP gateway failed Connect_PM GWHOST=http://FQN.com:3200, GWSERV=sapgw00, ASHOST=http://FQN.com:3200, SYSNR=00 LOCATION    CPIC (TCP/IP) on local host ERROR       hostname 'http://FQN.com:3200' unknown TIME        Sat Dec 4 17:03:39 2004 RELEASE     620 COMPONENT   NI (network interface) VERSION     36 RC          -2 MODULE      nixxi_r_mt.c LINE        2225 DETAIL      NiIHostToAddr COUNTER     6]
in my server: etc/services file:
sapdp00      3200/tcp        # SAP System Dispatcher Port
sapdp00s        4700/tcp        # SAP System Dispatcher Security Port
sapgw00      3300/tcp        # SAP System Gateway Central Instance Port
Regards,
AAAttar
Message was edited by: Aater Attar

Unit testing and system integration testing for crystal report

Hi gurus,
I am creating crystal report by oracle procedure, will you please tell me how to do unit testing and system integration testing? appreciate very much.

The focus of this forum is report design. The actual testing of reports would be subject to your own internal policies and procedures.
Jason

How to test the payload in XI

Hi all,
could please explain how to test the payload in xi and with steps.
Thanks in advance,
Radhika

Hi Radhika,
You can test in three ways.
1.) In message mapping directly give the relevant data and then execute. Here you can test whether the mapping is correct or not.
2.) In Integrstion Directory after completing and activating the Configuration, in tool you can find the Test Configuration tab. There you can give the sender and receiver details along with payload. Here you can test whether the Configuration is correct or not.
3.) In RWB in COmponent monitoring. Select the Integration Engine Monitoring. Here give the sender and receiver details, Interface name, name space, Quality of service.
Now give user name and pass word.
Paste the payload from massage mapping and then press test tab. Here yoyu can directly send the message from XI server to the receiver system.
Ok,
Jeevan

How to get the system info in a network

Hi to all.
can any one tell me how to get the system related,like system name and logged user ,info in a network using java...
thnx in advance,
ashok

There is quite a bit of data that is stored in the System Properties. Run this little test app and it'll display all of the System Properties, what you are looking for may be contained in there:
public class Test {
public static void main(String[] args) {
System.getProperties().list(System.out);
}

How to Create a system in portal server

I am trying to do the tutorial: How to Create a JDBC-based iView for Add/Update/Delete Record.
Its pre-requisite is: A system with an alias JDBC defined on your portal server, and mapped to a database.
Since I am new to VC, I do not know how to create a system, and I also do not know how to access the portal server.
Please help...

Hi Makarand,
Do you have any one who has the access to portal with administrator rights. I am hereby sending you the steps on how to create a system.
To define a system:
1. Create a new system; define all its properties
2. Create a default system alias.
3. Create a user mapping (from the user you use in VC) to the system alias, using the user\password to the backend system.
4. TEST the connection in the portal. If the test succeeds, it should be visible in VC discovery panel.
VC retrieves the systems via the portal.
You have to define the systems or use the defined systems in the portal you are connected.
To define systems in the portal:
System Administration => system configuration => system landscape:
in the PCD: right click on a folder and Add new system.
Then you have to define all the mandatory properties: Connector / Was / User management ...
dont forget to map your portal user with an R3/JDBC user...
thank you very much.

How to test the interfaces in XI ?

Hi ,
Our Xi system is being upgraded from 3.0 to 7.0. I was asked to test the interfaces once the upgradation is done. I am not sure how this testing is to be done and will there be aby test plan for this??
Can some one help me on this ??
Thanks in Advance,
Hemanthika

To test, you must have imported all your scenarios in to your new system.then couple of general tips,
1.testing can be done only after understanding the scenario.
For this, u refer to the integration scenario in ur design. so this shall give u an idea about all the systems involved in integration and how the data flowing is between them and what kind of systems they are?
2. For testdata, you might need of business or functional team as you cannot have any info on the file formats etc(depending on different scenarios invloved like R3, SOAP Databse etc)
these are only general tips. but u can refer to many of the trouble shooting guides already available blogs in sdn for any sought of inputs.But then, SDN is always there.
you can test/monitor ur results in RWB->component monitoring
also in sxmb_moni
thanks
kiran
Edited by: kiran dasari on Mar 17, 2008 4:44 PM

How to Test Mail's Trainable Filter?

In the Apple Support Discussions topic No Junk mailbox in Training mode? a question arose regarding how to test if the trainable filter (the filter that evaluates the "Message is Junk Mail" condition) is evaluated independently of the other conditional tests of the Junk Filter rule -- IOW, if some other test condition in the Junk Filter rule, like sender is not in the address book, evaluates to false, does the "Message is Junk Mail" test which follows it in the rule's list of conditions ever get evaluated?
A proposed test for this involved resending to yourself a message that Mail had previously marked as junk using the "Message > Send Again" function of Mail. It has been pointed out to me that this probably isn't a valid test because "Message > Send Again" doesn't send the original message in unaltered form (there are substantial changes in the header info regarding sender, path, etc.) & thus the filter may not consider the resent message as junk, even if it were to evaluate it.
So, for testing purposes, does anybody have a suggestion about how to resend (or fake resending) a received message to myself without altering its header info?

What matters is whether the Message is Junk
Mail condition would still evaluate to true
regardless.
That depends on what you are trying to determine & if the test produces decisive results.
For instance, consider tests with the standard Junk Filter automatic settings & no other rule involving "Message is Junk Mail" in the list. A test is performed in an attempt to determine if the filter's conditional tests are performed in the indicated order only until one evaluates to false.
"Send Again" should not cause the "Message is Junk Mail" test to be evaluated at all, since in this case the sender is oneself & the Junk Filter should exit as soon as the 'sender not in Address Book' test is evaluated.
Yet, when I try this with a message (correctly) marked as junk when originally received, the resent version is still marked as junk, & this happens not just on my on Mac but on the few others I have checked as well. I have tested with only a limited number of junk messages because on the other Macs the owners do not keep them for long & on my own I do not get that many (AOL is my primary account & has excellent spam filtering), so I would love to know if readers of this topic see similar results.
BTW, I should mention here what might be a potential hazard of using "Redirect" for testing with "real" spam: As I hope everybody knows by now, it is a bad idea to enable automatic loading of remote html images because doing so can alert spammers one's email address is valid. In one case, when I tried the "Redirect" method on my own Mac, AOL refused to accept the redirected message, possibly because of AOL's spam filters. At that point, Mail displayed the message, asking if I wanted to try sending it from another account, edit it, or what. Even though I have the option disabled, Mail loaded the original's remote html images along with its other content. I don't know if that is a design feature of Mail, a problem with just my Mac, particular to AOL, or what, but I want readers to be aware of it, just in case.
Anyway, for this reason I have since confined myself to testing with "Send Again," which seems safe in all cases, & mostly to testing only on my on Mac, just in case it is not.
Back to the "so what" aspects of this topic: It may be that the "Message is Junk Mail" test is sometimes treated differently from the other conditional tests in the Junk Filter in that it may be evaluated first or even if other tests before it evaluate to false. This makes some sense as a design feature in that even if the Junk Filter's automatic mode action isn't performed, it gives users more training opportunities. It may be a bug. It may just be something particular to my Mac. It may be something else, perhaps having to do with trusting junk headers, or something more subtle as yet unconsidered.
In any event, the point is holding all variables save one constant in any single "black box" test of a multi-variable system is a necessity for definitive results because variables may be interdependent. Because of this, the ability to resend to oneself the same message in unaltered form would be useful for a variety of tests, so I would still like to know if anyone has any ideas about how to do this.
iMac G5/2.0 GHz 17" ALS (Rev B) Mac OS X (10.4.7) 512 MB RAM, Kensington Trackball

Advice on how to setup my systems (xen, gpu passthrough, X)

Hello Archers
I'll try to keep it as short as possible
What I want:
I want to run different operating systems at the same time.
I want to be able to switch between them fast.
I want all keys to work in the guest systems (I've had trouble getting along with VNC regarding this)
I would prefer if the host system is as stable, lightweight, and as unmodified as possible
Why:
To learn about different systems and how to set them up.
I want to compare services/daemons of the same type, such as e-mail, ftp, http.
I also believe in using the right tool(OS) for the right job
How:
I've read about Xen's GPU passthrough feature which interest me quite a bit, but I'm a little unsure how it works, from boot of the host to X in a guest.
I know you "hide" PCI/GPU interfaces at the bootloader stage. But if you for example hide the main GPU because you want this in your guest, what happens on the screen while the host system is booting? Is the monitor just saying "No signal" until the guest starts booting and takes over it?
If I disregard the GPU passthrough feature, I think I would need X on my host system. I read Xen either uses VNC or SDL to serve a screen of a guest. However, VNC isn't perfect with mod keys and mouse acceleration, and SDL requires X to be running at all times (host X crashes = all guest with SDL crashes).
So I was thinking if it's possible to connect to a running X within a guest, from my X running on the host, and use Ctrl+Alt+F1...F12 to change between the different guests running X.
I'm familiar with starting applications on remote X servers by changing the DISPLAY variable, but is it also possible to do something like
DISPLAY=xenguest1:0 xinit /path/to/wm -- :1
And then have the guest X on, say, Ctrl+alt+F4, while the host X is on Ctrl+alt+F3?
Previous experiences:
I've used VirtualBox and QEMU, but in both cases I felt the quest OSes were more temporary and targeted towards development on different platforms. The mouse pointer was also a bit laggy in QEMU, which I didn't like while testing graphical systems.

Is there a possibility to setup my TC so that I can connect my MacBook Pro via an ethernet cable to the TC without a connection to the wireless network router?
No, when the TC is configured to "join" a wireless network, it performs no routing functions...the Ethernet ports are not enabled.
If this is not possible, what can I do to be able to make the first backup via ethernet and then keep that backup on the TC and setup the TC as a part of my wireless network again (without connection to the router) ?
Temporarily, configure the TC using AirPort Utility - Manual Setup as follows:
Click the Wireless tab below the row of icons and change the Wireless Mode to "Off"
Click the Internet icon, then click the Internet Connection tab. Settings should look like this:
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Click Update and click "ignore" to any messages that indicate that you do not have an Ethenret cable plugged into the WAN port and you do not have an Internet Connection
Connect an Ethernet cable from your Mac to one of the LAN <-> ports on the TC
Turn off the wireless on your Mac
Setup Time Machine again to connect to the Time Capsule and start the backup
In general, backups should occur at about 30 GB an hour, so a good time to do this might be overnight
When the backup is completed, configure the TC again to "join" your wireless network so that incremental backups will occur over the wireless network

How to test the connection between DSD backend and DSD connector

Dear all,
I am configuring the MDSD scenario .. and i want to insure that my customization is correct
How to test the connection between DSD Backend and DSD connector ??

Hi Viren,
The problem is:
We have a new BW system. The basis people asked me to check the connection between this BW system and the R/3. There is only one client for now(100). I have logged into 100 and tried executing RSA1 to check the connection, but it gave a message box saying "You can only work in Client 000". Then I have treid logging into 000(just to make sure) and tried executing RSA1. Even here I got a message saying "The SAP BW system must not be operated in client 000". Now, I am not sure of what is wrong in clien 100. I am not sure if I have to do some settings before I access RSA1 or any other BW transaction. Could you please help me in this.
Also, I just checked the RFC destinations in BW. There is a destination created for our R/3 and I have noticed that they have given a remote UserID and password for remote login. I tried to check the Remote UserID in SU01 but there is no userID with that name. Could this be a problem?
Thanks,
RPK.

How to test the data

Hi,,
The below test data is for SD report which do the monthly batch transfer from Annexure to F-form
Can you please help me how to test the data? and prepare the unit test case.
1. Intra-plant movement of inventory between two plants with the same region Code - In India there are two plants in the state of Maharashtra.
Plant 8600 (Vendor 10999346) -> Plant 8601 - MM# 1003623 / 1013515 / 5214135 / 8788143
NB PO# 6500002231 / ZU PO 4600000500
2. Intra-plant movement of inventory from Plant 8650 - Goa to one Depot Plant
Plant 8613 (Vendor 10999359) -> Plant 8618 - MM# 1003623 / 1013515 / 5214135 / 8788143
NB PO# 6500002232 / ZU PO 4600000501
3. Intra-plant movement of inventory between two Parts plants.
Plant 8650 (Vendor 10999344) -> Plant 8601 - MM# 4908281 / 4908323 / 4908968 / 4922001
NB PO# 6500002233 / ZU PO 4600000502

Please go thorugh this ...
eCATT stands for extended Computer Aided Test Tool (eCATT) which is built is testing tool to test SAP system. By using testing tool we can test the entire business process, and we can also use this tool with a third party testing tool (I am not covering this topic). Execution of every test script ends with a log, which explains the results of the test script.
By using eCATT we can do following operations,
·        Test transactions, reports, and scenarios
·        Call BAPIs and function modules
·        Test remote systems
·        Check authorizations (user profiles)
·        Test updates (database, applications, GUI)
·        Test the effect of changes to customizing settings
·        Check system messages
For more information go to: eCATT::Extended Computer Aided Test Tool (sdn.com)
Here I am discussing fundamentals about eCATT in detail. You can find very good documentation in sdn.com.
To develop a test script in eCATT we need to follow the following steps,
1. Creating Test Scripts.
2. Creating Test Data Containers[16] .
3. Understanding System Data Containers[17] .
4. Executing Test Configurations.
There is a very good web blog on eCATT in sdn.com which explains eCATT with necessary screen shots. To read document click here Blog on eCATT in sdn.com
For details and the screenshots     please see the link
http://www.erpgenie.com/sap/ecatt/
Reward points if it is usefull ...
Girish

How to test my system?

Similar Messages

Maybe you are looking for