How to throw Custom Error message in Portal

Hi Experts !
I am working on CRM 5.0 and using BADI CRM_ORDER_STATUS for LEAD transaction.
This BADI is checking the userid when user is trying to change the status of a lead. if userid is not correct than it is throwing an Error Message in GUI but this message is reflecting in Portal as an Exception but what I need here is a custom Message similar to GUI.
Pls suggest .
With Thanks & Regards
Navneet

Similar Messages

How to show custom error message in WebADI Excel template?

Hi,
I've created a custom Web ADI integrator and associated it with a 'Procedure' based custom interface.
WebADI Interface API Returns is set to "Error Message".
I'm using raise_application_error(-20001, "Actual Error Message") for invalid rows,but custom error message from PL/SQL is not populated on the excel template.
Instead it is showing "SQL exception occurred during PL/SQL upload".
Am I missing anything? How to show custom error message from Pl/SQL procedure to WebADI Excel template?
TIA
Narasimha

The custom API errors are visible in the BNE log but not on the Excel.
BNE Log=>
12/10/13 2:52 PM Web ADI Upload Job 13008 ERROR          BnePLSQLUpload.doUpload: Exception while uploading to PL/SQL API. Error Code: 20001, Message: ORA-20001: -Please enter CONTAINER_ID - Enter PO_NO -
ORA-06512: at "APPS.XXPO_COSTFACTS_WEBADI_PKG", line 264
ORA-06512: at line 1
12/10/13 2:52 PM Web ADI Upload Job 13008 ERROR          BnePLSQLUpload.doUpload: Stack trace: java.sql.SQLException: ORA-20001: -Please enter CONTAINER_ID - Enter PO_NO -
ORA-06512: at "APPS.XXPO_COSTFACTS_WEBADI_PKG", line 264
ORA-06512: at line 1
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:439)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:395)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:802)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:436)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:186)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:521)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:202)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1005)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1307)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3449)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3550)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4710)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
at oracle.apps.bne.integrator.upload.BnePLSQLUpload.doUpload(BnePLSQLUpload.java:284)
at oracle.apps.bne.integrator.upload.BneSAXUploader.processDeepestLevel(BneSAXUploader.java:2346)
at oracle.apps.bne.integrator.upload.BneSAXUploader.startElement(BneSAXUploader.java:1182)
at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:181)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1288)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:336)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:234)
at oracle.apps.bne.integrator.upload.BneUploader.processUpload(BneUploader.java:301)
at oracle.apps.bne.integrator.upload.BneAbstractUploader.processUpload(BneAbstractUploader.java:114)
at oracle.apps.bne.integrator.upload.async.BneAsyncUploadThread.run(BneAsyncUploadThread.java:140)
12/10/13 2:52 PM AJPRequestHandler-HTTPThreadGroup-5 WARNING        BneOracleWebAppsContext.getTimeZone CLIENT_TIMEZONE_ID has not been set
12/10/13 2:52 PM AJPRequestHandler-HTTPThreadGroup-5 ERROR          BneOracleWebAppsContext.getExtraJDBCConnection recieved the same connection as the base connection. There may be transaction problems.
How to show the same error in the excel template?
Here is the package:
CREATE OR REPLACE PACKAGE BODY APPS.XXPO_COSTFACTS_WEBADI_PKG
AS
   PROCEDURE upload_data (
                          P_CONTAINER_ID IN VARCHAR2
                        , P_SAIL_DATE IN DATE
                        , P_PO_NO IN VARCHAR2
                         ) IS
    --declare
    lv_err_msg      VARCHAR2(240);
    lf_err_flag     NUMBER := 0;
    ln_temp         NUMBER;
    BEGIN
    --------------------- checking for mandatory parameters---------------------------
      IF (P_CONTAINER_ID IS NULL) THEN
         lf_err_flag := 1;
         lv_err_msg := lv_err_msg||'-'||'Please enter CONTAINER_ID - ';
      END IF;
      -------------Validation for Sail Date Format----------------------
      IF (P_SAIL_DATE IS NULL) THEN
         lf_err_flag := 1;
         lv_err_msg := lv_err_msg || ' ' || 'Enter Sail Date - ';
      ELSE
         BEGIN
            SELECT 1
              INTO ln_temp
              FROM DUAL
             WHERE P_SAIL_DATE = TO_DATE (TO_CHAR (P_SAIL_DATE, 'DD-MON-YYYY'), 'DD-MM-YYYY');
         EXCEPTION
            WHEN NO_DATA_FOUND THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' Enter Sail date in DD-MON-YYYY Format';
            WHEN OTHERS THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' Enter Sail date in DD-MON-YYYY Format'|| SQLERRM;
         END;
      END IF;
      -------------Validation for PO_Number----------------------
      IF (P_PO_NO IS NULL) THEN
         lf_err_flag := 1;
         lv_err_msg := lv_err_msg || ' ' || 'Enter PO_NO - ';
      ELSE
         BEGIN
            SELECT count(1)
              INTO ln_temp
              FROM PO_HEADERS
             WHERE Attribute4 = P_PO_NO;
         EXCEPTION
            WHEN NO_DATA_FOUND THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' No Oracle PO for Biceps PO#'||P_PO_NO;
            WHEN OTHERS THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' Error getting the Oracle PO for Bicpes PO#'||P_PO_NO||' Error-' || SQLERRM;
         END;
      END IF;
     -----------------------Insert Record----------------------------
     IF lv_err_msg is NULL THEN
     BEGIN
         INSERT
          INTO XXP2P_HW_COST_FACTORS_STG
                 CONTAINER_ID
                ,SAIL_DATE
                ,PO_NO
                , ERROR_FLAG
                , ERROR_MSG
               ,CREATED_BY
                ,CREATION_DATE
                ,LAST_UPDATED_BY
                ,LAST_UPDATE_DATE
                ,LAST_UPDATE_LOGIN
            VALUES
                 P_CONTAINER_ID
                ,P_SAIL_DATE
                ,P_PO_NO
                ,lf_err_flag
                ,lv_err_msg
              ,FND_GLOBAL.USER_ID
                , trunc (sysdate)
                ,FND_GLOBAL.USER_ID
                , trunc (sysdate)
                ,FND_GLOBAL.LOGIN_ID
              -- commit;
              DBMS_OUTPUT.put_line
                '-' || 'After ap_invoices_interface'
        EXCEPTION
        WHEN OTHERS THEN
          ROLLBACK;
          lf_err_flag := 1;
          lv_err_msg := lv_err_msg || ' ' || 'error loading CONTAINER_ID-' || P_CONTAINER_ID || SQLERRM;
          raise_application_error(-20001, lv_err_msg);
        END;
    ELSE
          raise_application_error(-20001, lv_err_msg);
    END IF;
END upload_data;
END XXPO_COSTFACTS_WEBADI_PKG;

How to throw custom errors?

Hi Friends
How to throw custom errors in APEX?
For example if I violate a datatype instead of the oracle error i need to get a custom error.
Thanks
Nav

Use raise_application_error - Its built-into the database and not really an APEX specific thing. Google it for more info
Like so:
declare
v_num number;
begin
v_num := 1/0;
exception
when zero_divide then
raise_application_error(-20001, 'You tried dividing by zero - luckily I caught it just in time!');
end;

ICI - How to display custom error messages in SAP CRM

Hello,
we are working on a custom Contact Center which interfaces with SAP CRM Version 7 with Enhancement Package over ICI.
The basic call functions like accepting, hanging up, holding and retrieving are fully implemented and are working already.
Our goal is to display error messages in the CRM so that clients know there is something wrong, for example why he can't be log in successfully (e.g. the telephony server isn't reachable).
We already found the ICI Documentation file which provides us the CRM SOAP error codes and tried to send SOAP Fault messages, but never got
them to screen.
Please find an attached example screenshot what we mean exactly, reproduced by trying to make a call with CRM user while BCM CDT isn't
running in the background.
Regarding to this topic we've the following questions:
- Is it possible to display custom error messages on the CRM or is this functionality limited to SAP?
- Could you provide us some further information on how to use this feature exactly (implementation details?) and how the SOAP XML should look like to get it work?
Thank you in advance!
Best regards
René Holy

NewUser7 wrote:
Please correct me if I am wrong
I need to create an entity adapter and attach an error handler with the adapter? or can i handle that in the event handler itself. I coulnt find any api for handling errorsYou can do it both ways but since we are talking about event handler now, then in 9.x you need to extend com.thortech.xl.client.events.tcBaseEvent class for creating a event handler. In tcBaseEvent class there are various flavors of handleError method. So use that as per my note earlier and you should be good.
HTH

How to create Custom error message in SharePoint 2013

Hi,
I have created one document library.On uploading the same file SharePoint throws error as"server error.The same file exit".
But my requirement is not to show the SharePoint default message.I wanted to create custom message and show the pop up for the same file upload.
Is there any way to create any custom error page or can I manipulate SharePoint default error page?
Any help?
Thank you

Hi,
You can create an event receiver to set the validation error messages. One such post to redirect the custom error page is as follows
https://social.msdn.microsoft.com/Forums/office/en-US/2bc851f6-e04b-4550-b87f-9b874a290482/sharepoint-event-receivers-and-custom-error-messages?forum=sharepointdevelopmentlegacy
Create custom error page for SharePoint event receiver
Please mark it answered, if your problem resolved or helpful.

Custom Error message in portal

HI Experts,
I trying to implement cutom error messages in portal. By Following the below link.
[https://cw.sdn.sap.com/cw/community/docupedia/nw70java/blog/2010/03/21/custom-error-messages-in-the-portal]
As of now I trying to implement it for error code "500".
<error-page>
             <error-code>500</error-code>
             <location>/Customerrors/500.html</location>
       </error-page>
</web-app>
The above code I pasted in web.xml. 500.html is there in customerrors folder. I have also restrated the system.
when I log in to portal system still I could see standard message coming for "500" code error not the custom one from 500.html.
Iam using EP7.0 EHP1 .
Thanks
Surender Singh Dahiya

Surender,
I guess it should work in the similar fashion.However, I do not have access to a portal system now. Will try testing the scenario soon and keep you posted.
Cheers!
Sandeep Tudumu

Editable ALV - how to throw an error message for a specific line & field

Hi all,
I've implemented an editable ALV and also the ON_DATA_CHECK event to check the values, entered in the ALV. So this works fine and I can check the values.
But now, I want to throw an error message corresponding to the field in the ALV, where the error occured.
How can I throw this error message corresponding to a specific line/field in the ALV?
I was using REPORT_ATTRIBUTE_ERROR_MESSAGE and REPORT_ELEMENT_ERROR_MESSAGE but without success.
I'm also using a loop over the "CHANGES" in the ALV and within this loop, I use
elem_alv = node_alv->get_element( index = <change>-element_index )
to get the element for the message.
CALL METHOD lo_message_manager->REPORT_ELEMENT_ERROR_MESSAGE
EXPORTING
    MESSAGE_TEXT              = 'my message'
    ELEMENT                   = elem_alv
*    ATTRIBUTES                =
*    PARAMS                    =
*    MSG_USER_DATA             =
*    IS_PERMANENT              = ABAP_FALSE
*    SCOPE_PERMANENT_MSG       = CO_MSG_SCOPE_CTXT_ELEMENT
*    MSG_INDEX                 =
*    CANCEL_NAVIGATION         =
*    IS_VALIDATION_INDEPENDENT = ABAP_FALSE.
2.) is it right, that for an editable ALV, I can't use the WDDOBEFOREACTION to do the checks?
If I try to use this, I can't get the values of my ALV table to check it.
Thanks,
Andreas

Hi Andreas,
I have tried to replicate your problem and I am getting the desired output. I have a row by name TEMP_NEW in my ALV and I want to throw an error message whenever the user enters a value of 4 for that particular field. Please find my coding as below. The important thing is where we perform the actual comparison between the r_value and 4. r_value is defined in SALV_WD_S_TABLE_MOD_CELL as reference to type DATA. So suppose the user enters a value of say 3 in the TEMP_NEW field of the ALV then r_value would contain 3 but if you observe its type in debugging mode it would be as TYPE REF TO I and not TYPE I. So you cannot directly say something like:
"if ls_modified_cells-r_value = 3" as this would lead to a syntax error. Define a field-symbol say <temp> and then use it to get the actual value into it by saying like:
ASSIGN ls_modified_cells-r_value->* TO <temp>.
Then you can use this <temp> for comparison in your IF statement like:
IF <temp> = 3.
Find the entire coding as below:
METHOD check_data.
DATA: lr_node TYPE REF TO if_wd_context_node,
        lr_element TYPE REF TO if_wd_context_element,
        ls_modified_cells TYPE salv_wd_s_table_mod_cell.
FIELD-SYMBOLS <temp> TYPE data.
" get message manager
DATA lo_api_controller     TYPE REF TO if_wd_controller.
DATA lo_message_manager    TYPE REF TO if_wd_message_manager.
lo_api_controller ?= wd_this->wd_get_api( ).
CALL METHOD lo_api_controller->get_message_manager
    RECEIVING
      message_manager = lo_message_manager.
lr_node = wd_context->get_child_node( name = 'NODE' ).
LOOP AT r_param->t_modified_cells INTO ls_modified_cells.
    lr_element = lr_node->get_element( index = ls_modified_cells-index ).
    IF ls_modified_cells-attribute = 'TEMP_NEW'.
" Get the value extracted into the field symbol from the reference variable
      ASSIGN ls_modified_cells-r_value->* TO <temp>.
" Use the value present in this field-symbol for your comparison
      IF <temp> = 4.
" report message
        CALL METHOD lo_message_manager->report_attribute_error_message
          EXPORTING
            message_text   = 'Sample message text'
            element        = lr_element
            attribute_name = ls_modified_cells-attribute.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDMETHOD.
Hope this helps resolve your problem.
Regards,
Uday

How to display custom error message if the Required field is not entered?

Hi,
I have made one input field as required field in a view.
I want to display one custom error message ,if the required input field is not entered.
Please help me regarding this.
Thanks,
Deepika

hi deepika....
First go to message pool under webdynpro components.
Create a new message there..of type error.
Enter your text.
Now to avoid null pointer exception , in wdDoInit(), initialise the value
wdContext.currentDateTimeElement().setDate("");
now create an action for submission of data. If field is empty, then within the button write:
msg = wdComponentAPI.getComponent().getMessageManager();
if(wdContext.currentDateTimeElement().getDate().equals(""))
msg.raiseMessage(IMessageCompTodatDateTime.ERROR,new Object[]{""},true) ;
between begin others put:
regards,
pinki
IWDMessageManager msg = null;

How to display custom error message in Job log for batch processing

Hi All,
I am rexecuting one R/3 report in batch mode and i want to display all the custom error i have handled in job log when its executed from SM36,SM37. The custom error are like 'Delovery/Shipmet doe not exits' or others which we can display in online mode like message e100(ZFI) or any other way and accordingly we can handle the program control like come out of the program ro leave to transaction'Zxxx' or anything. But i want my program to be executed completely and accumulate all the error in job log of batch processing.
Can anyone tell me how can i do so...
Thanks,
Amrita

Hi,
Thats what i have done from the begining. I have written message like this:
Message i100(ZFI).
I was hoping to see this message in the log. But i cant see. Can you help me pleae...

How to add custom error message in standard application log of change doc.

Hi,
While saving chnage document I need to add raise an error on specific condition. As Error messages is being shown in application log I added custom message in include LCRM_1O_UIF15 by using BAL_LOG_MSG_ADD FM however it is not showing in the screen. What could be the reason? Can anybody please explain?
Rgds
Sudhanshu

Muhammed,
Have you tried throwing a JboException in your AM code?
John

IDOC_INPUT_ORDER - How manage the custom error message ?

Hello,
on EXIT_SAPLVEDA_002 and EXIT_SAPLVEDA_003 I done some custom check, (I would show some custom message as a result of these check).
My question is: How to show these custom message on the standardc idoc spool (WE02) ??
There's DERRTAB internal table to manage the error, but is not available on there exit ...(EXIT_SAPLVEDA_002 and 3)
Any idea ??
thank you

Hello,
question is if you want to raise an error, which makes sense only if the document is not posted or just an information message.
Please consider that you can put messages into the idoc only connected with a status. If you set status 51 thge Idoc is reprocessible, if you set status 53 it is successfully processed.
In error case you can raise exception USER_ERROR. in exit EXIT_SAPLVEDA_002. Set SY-MSGTY, SY-MSGID, SY-MSGNO, etc before. In exit EXIT_SAPLVEDA_003 you can set changing parameter ok to space. Then SAP will add an error message.
/Michael

How to display custom error message in custom page

Hi,
I would like to show the exception details of custom component in my custom idoc page. Please let me know how to get the exception which is cached in Custom component in page.
Thanks

Hi,
Do they get a 404 error? If it is the case, you can customize error pages : [Custom Error Pages|http://help.sap.com/saphelp_nw70/helpdata/en/ec/1273b2c413b2449e554eb7b910bce7/frameset.htm].
Regards,
Pierre

EBS 12.1.3: Unable to throw custom error messages back to Excel document

Hi Gurus,
We are on 12.1.3 using Desktop Integration Framework.
I created a API Procedure based custom Integrator.
In the PLSQL procedure, I have raise_application_error(-20009, ‘Custom Error’) but this message never comes through.
It always shows a ‘SQL exception occurred during PL/SQL upload’.
When it is a success, it shows a green smiley which is fine.
But when there is a explicit raise_application_error in plsql proc, I would like the error message to flow all the way back to Excel document.
1.) What should I be using 'API Procedure or API Function' in the Custom Integrator,
2.) Should it return Error Message or FND Message?
Has it worked for anyone in 12.1.3?
Please let me know.
Thanks
Vinod

hi ,Vinod
Please check the 'API Returns' is setted with 'FND Message Code' in Interfaces define(Step 2 of 5).
Regards,
leno

Web composer option not displaying while Customizing Error Messages of Portal applications

Hi
I am trying to customize the error messages through web composer in sap portal but when i Choose System Administration → System Configuration → Knowledge Management → Content Management Web composer option is not shown . I am using netwearver 7.0
please guide me I searched google but couln't find any satisfactory answer.
Thanks

Hi Raima,
From your description I assume you are attempting to implement the steps outlined in the following documentation, is this correct -
Modifying Error Pages - Carrying Out the Initial Configuration - SAP Library
If you are navigating to the KM configuration through the steps you outlined and you do not see WPC Composer listed under 'Content Management' I would suspect that it is not deployed on your system (at least not successfully). It is not included as part of the default stack in EP 7.0 and must be deployed separately. If you do intent to deploy this component, you should also note that the SP level of the KMC-WPC SCA should match the SP level of the other KM and EP components.

Custom error messages OIM11g

Hi,
Can anyone let me know how to throw custom error messages while creating users for custom fields / attributes in OIM 11g?
In 9i, we can attach custom error adapter in Data Object information of Users form. But in 11g, this feature is not available.
- Kalyan

I didn't tried this but you can check this link
Re: How to use custom error message definition in OIM 11g?

How to throw Custom Error message in Portal

Similar Messages

Maybe you are looking for