How to Transmit video over h263-2000/rtp

I want to transmit a 3gp video over h.263-2000/RTP but this format is not supported by JMF APIs. I tried installing Fobs4jmf plugin in order to read 3gp video file but the supported output formats are h263/rtp and jpeg/rtp....nothing about h263++/rtp. Any ideas?
Thanks for help

If you are using JMStudio, click File -> Transmit, capture for the capture of webcam, then you click "Next" and finally you must insert IPaddress of computer destination and port number (for example 1550).
On computer destination open JMStudio, click file, then click RTP session and finally you must insert IPaddress of computer(transmitter) and numberport=1550.
I always use this numberport. On the same computer not work.
Excuse me for my english.
I'm italian.
Robot84

Similar Messages

  • Anybody transmit video over HTTP?

    use JMF to transmit video stream over HTTP but not RTP

    I'm trying to do just this at the moment, to try to implement a low bitrate videoconferencing application. It is possible. The people behind Microsoft Portrait did it successfully. Check out their white paper at http://www.acm.org/sigs/sigmm/MM2001/ep/li-demo/.
    But I don't have any idea how to do it. I'm not too good at networking stuff. Any help I can get?

  • How to transmit video in the same PC

    The AVTransmit2 and AVRecive2 run in 2 different PC, but if i want to run in 1 PC, what should i do ?
    Where should i modify the code o IP and port ?
    Please help me.

    1- In AVTransmit2 you should find following:
    localAddr = new SessionAddress( InetAddress.getLocalHost(),port);change it to:
    localAddr = new SessionAddress( InetAddress.getLocalHost(),
                                  SessionAddress.ANY_PORT);2- You can also transmit to multicast address (first octet of IP address: 224-239), then in receiver use the same address... you would then be able to receive the transmitted media on the same system.
    Thanks!

  • How to recieve and render h263++ with JMF?

    Hello JMF guys!
    could someone help me with this problem?
    I receive an RTP stram from a remote PC and I want to render it on my PC with a JMF application.
    All works fine if I use a static payload but in this case the video is:
    H263-2000 (aka h263++), payload type is 96, framerate=15.
    Have I to install some plugin?
    could someone post a piece of code to render this kind of stream?
    Thanks in advance for your help!
    Maggie

    Kalvin,
    Thanks for your quick answer!
    I already used AVReceive2 from SUN it does not work for H263-2000 profile0 level10 (but it works fine for static payloads).
    The incoming video is h.263-2000 profile0 level10 transmitted with payload 96 (not a standard h.263 with payload 34).
    I've no possibility to change the video format source.
    When I try to receive the streaming with AVReceive2 I see an error like this:
    +"No format has been registered for RTP Payload type 96..."
    any ideas?
    Thanks for support!

  • Who know to transmit video/audio stream.

    Hi Friend
    Who know how to transmit video/audio stream in A LAN and other LAN.
    thanks

    sad :(
    but if I have my server, which get stream from one of clients and send it to others, seems to be smaller time to make "stream redistributing" server from it... Looks fun - different-level servers system :))
    Each one send to its authorized clients =)
    I hope, chief won't give me task to make it for closed LANs...
    P.S> just a small offtop:
    My respect to wew64, I would be glad to ever know (and do) as much as he does :)

  • Videos over videos

    So, I watch a lot of YouTube, and I've seen what the experts can do. Attached is a picture of the ending screen of my favorite YouTuber, Nerd³. You'll notice the icons with annotations over. They actually play out as videos. Luckily, I know how to make annotations. I'd like to know how to make the videos. I'm doing a Spyro 3 series, to teach me how to edit, considering how long that game is, and so having done the first episode, and only learning how to extract sections of video to delete, I'd now like to focus on an ending. A start wouldn't go amiss either, but that's neither here, nor there.
    TL;DR, I'd like to know how to play videos over my current video, not taking up the entire video window.

    Type in the Help:
    Track Matte, Garbage Matte and Picture in Picture.
    Get Started with Premiere Pro
    New to Premiere Pro? Get started with your first project — editing a video. In less than an hour, you'll learn to edit together different types of media to tell a video story. 

  • Synchronize audio and video over RTP

    Hi all,
    I am new in jmf. Please any one tell me, how to synchronize audio and video streams, when we capture thru audio and video capture devices and send it over network thru rtp protocol and receive at client side. How to syncnronize at client side? Please send me reply if any one have solution in jmf.
    Thanks in advance.

    Does anyone know about how this is done? I'm doing a videoconference thing with jmf, QoS is a required componenet! So if anyone knows about how this is done, plz share with discussion! All I know so far is that I can buffer the incoming streams to some extend then call syncStart() to start the video with the starting time of the video!

  • How to transmit audio and video simultaneously?

    Hi,
    I am new at jmf.Now i have a problem that how to transmit audio and video at the same time.The AVTransmit can transmit only one media,audio or video.Anybody have experience with it?Please help me.Thanks a lot!

    Hi, audio and video data must be transmitted in 2 distinct RTP sessions, by using different ports at sender side.
    At receiver side, the port can be only 1.

  • How to transmit multiple messages over CAN

    Hi All,
    How to transmit multiple messages over CAN ? With all three messages i want to send the system time & date also.
    How can i get the timestamp in DBL format (Since the timestamp in the input of ncWriteNetMult.vi is a DBL). If possible kindly share the code in Labview 7.1 also.
    Thanks in advance.
    J

    The NI-CAN driver brings examples for nearly every use case. Driver version 2.4 or later has the Write multiple function to write multiple frames at ones.
    There is an example available for LabVIEW, CVI and VC/VBasic called CAN Transmit multiple.
    Also check the attached VI and the Can manual: http://www.ni.com/pdf/manuals/370289m.pdf
    What do you mean by converting Timestamp to DBL? Timestamp contains all date and time information. You can convert it into string format as shown below and then use the relevant data from it by string operations.
    Hope this solves your problem.
    Shreyas Hebbare
    Shreyas Technologies
    India
    Attachments:
    Transmit Multipe Objects at Different Rates_LV80.vi ‏36 KB

  • How can i transmit videos, photos or anything else displayed on my ipad to other three ipads constantly

    Hi,
    I am lecturing few kids, I would like to use ipads. I need to know how can i constantly transmit videos, photos or anything else displayed on my ipad to other three or four ipads of those kids..
    Thanks in advance..

    check out this thread:
    https://discussions.apple.com/thread/3118281?start=0&tstart=0
    some debate whether this really works.
    You could mirror the teachers ipad to a mac or pc then share the mac or pc screen.
    google
    mirror ipad screen
    Robert

  • How do I superimpose a video over a picture?

    How do I superimpose a video over a picture?

    First, go to iMovie/Preferences and make sure that the Advanced Tools are enabled.
    Drag the Photo to your project.
    Now select the frames that you want from the clip in your event library. You can get the whole clip, or a selection. Your selection will have a yellow border around it. Click inside this yellow border and drag it to your photo. Drop it at the point where you want the video to be superimposed and drop it on the photo. A popup menu will appear. Choose CUTAWAY.

  • How to transmit V/A signal over internet?

    I have transmit the signal over network successfully,but how to transport them over internet?
    I use AVTransmit2.java or VideoTransmit.java can transport the V/A signal over network,but the sample need to fill in the parameter.
    I hope transmitting V/A signal over both network and internet,what should I do?I think it cannot solve by fill the first parameter.
    pls help me!

    Nobody can answer my question?

  • How do i add video over black background in iMovie '11

    Hello,
    I'm looking to add a playing video over a black background in order to make credits/blooper reel, kind of like how this video on Youtube did it http://www.youtube.com/watch?v=aM3n1T60csc. Does iMovie 11 have this capability? If so, how can I do it?
    Thank You! Any help is much appreciated.

    The video over black is easy enough. Just add a black bacground and use Picture-In-Picture to add your video.
    http://support.apple.com/kb/PH2226?viewlocale=en_US
    http://support.apple.com/kb/PH2243?viewlocale=en_US&locale=en_US
    Matt

  • How much should an iPad 3 battery drain when watching videos over Wi-Fi?

    How much should an iPad 3 battery drain when watching videos over Wi-Fi?

    Try Battery Doctor. It'll provide you with plenty of info on battery consumption.
    https://itunes.apple.com/sg/app/battery-doctor-hd/id459702901?mt=8
    http://i1224.photobucket.com/albums/ee374/Diavonex/17e0b678bc14bd16c469f71151a08 a7d_zpse788fae8.jpg

  • Lion Mail is sending me my mail over and over.  2000 to 8000 messages at a time.  How do I stop this.

    Lion Mail is sending me my mail over and over.  2000 to 8000 messages at a time.  How do I stop this.
    http://img825.imageshack.us/img825/4003/screenshot20110731at913.jpg
    This is a little screen shot of it.
    I am new to mail.  And I have it set up with Gmail and IMAP.  And every so often it keeps sending me back my deleted messages.  At first it was 2000 message lots.  And as the screen shot in the link shows.  One time it wanted to send me 8000 messages.  I just want my deleted messages to stay deleted.  From Mail, from Gmail, from everything.  But they don't seem to want to stay deleted.  I don't know if I have det up anything wrong.  But it's pretty frustrating.
    If anyone can help me I'll be really appreciative.

    They are being sent to the All Mail folder.  The inbox is pretty much unaffected.
    I don't want to hide the All Mail folder and forget about it.  I am after the messages gone forever.  Especially from the All Mail folder.
    I'm the kind of person who uses email like sms.  I use it to contact people annd delete 95% of the messages after reading.  I don't want them archived.  I don't want them stored in the All Mail folder.  I want them totally gone.
    And yes it seems Mail is downloading all my messages over and over.  So my question is how to stop the messages being stored/archived and to instead be totally deleted.
    In the gmail settings I found:
    Auto-Expunge off - Wait for the client to update the server.
    When a message is marked as deleted and expunged from the last visible IMAP folder:  Immediately delete the message forever.  Instead of archiving it like I had set before.  I'm not 100% sure if that'll fix the issue I am having.  I'm sure you'll be able to tell me if I am on the right track.
    And thanks for the quick reply.

Maybe you are looking for

  • Opening a PDF in Acrobat via an AIR application

    Hey, I'm creating my first AIR application. The application needs to be able to launch Acrobat to view a PDF file. I have done a lot of searching and can't seem to find anything, could someone point me in the right direction? I read a response here:

  • ITunes ask me to restore from a old backup all the time when I connect my iPhone5.

    Hi! My iTunes ask me to restore from a backup when I connect my new iPhone 5. I have done the backup process but it still ask me to do it. How do I get iTunes to understand that this is done? I connected my iPhone and restore it from a backup from my

  • Photo orientation in photo grid

    All of my photos in the photo grid are horizontal. Is there a way to change some to a vertical orientation?

  • Does creation of new xml file captures latest value?

    HI All, say for instance, if web port has been changed from 8000 to 80 and after this change xml file gets corrupted in apps tier... Does creation of new xml file in apps tier captures latest value of web port 80 and all other latest changes made so

  • Recordable Volume Change Control Number?

    Does any one know the midi control number that Garageband 09 uses to record volume changes on a software instrument track? I'm not talking about the standard Midi control number 7 for volume - this only controls the left-right fader in the track head