How to transport Minor changes in BPC 7.0 to other client

Hi,
I am very new to BPC and got an ticket to do a minor change in script logic. We are in BPC 7.0.
I am not sure how I can transport this minor change from Dev to other client.
My question is:
1. Do we need to make system offline while making changes to Script logic in BPC Admin or it is required only at the time of collecting transport request in BI using tcode: UJBPCTR?
It would be kind enough if any one could let me know What are all the activities we need to consider/take care before transporting objects from BPC DEV to BPC QUALITY
Thanks in Advance.
Regards, Trine

You only need to take it offline when executing UJBPCTR and when importing in the target system.  The system willl collect all of the appset and transport it, but will do a delta calculation on the target system to determine if any structure changes are required.  The script logic data should simply be overwritten.
Cheers,
Rich Heilman

Similar Messages

  • How to transport Parameter changes in a crystal report

    Hi All,
    Very Good morning!!!
    I have designed a crystal report with static parameters. Earlier i used to have a dropdown kind of input selection for my parameters.
    Now i got a new requirement for a direct input in the field....tht means no dropdown ...single date field is to be entered directly.
    Accordingly i have removed the dropdown and changed to a single direct date field. I saved these changes to a request and transported to quality. Not sure whether the parameter changes are collected into a request.
    Whereas i couldn't found any changes of my parameters in quality. They are as same dropdown manner in the quality whereas i need them to be a direct field date entry which did not affected the quality server after transporting the changes.
    Could some one please let me know how to reflect these changes in quality server regarding parameter changes in a crystal report for BW.
    Thanks in Advance.
    Jitendra

    Please re-post if this is still an issue or purchase a case and have a dedicated support
    engineer work with your directly

  • How to transport the changes of lsmw "Read display Program" changes to prod

    Hi,
    i have made some changes in the SAP generated program /1CADMC/SAP_LSMW_READ_<>.
    i.e., in step : Read display program
    the issue is that i made changes...but the changes are stored in $tmp.
    now how to move these changes to Production.
    when i assign to any package it is showing an error saying
    "/1CADMC/SAP_LSMW_READ_<>cannot be assign to package.move to package starting with "/1CADMC/".
    Thanks.
    Kumar.

    HI,
    LSMW cannot be transported from one client to another.
    You will have to do IMPORT EXPORT.
    Run transaction LSMW:-
    Give the Project, Subproject and Object.
    From Menu go to Extras->Export Project.
    Specify the project name
    By default everything in the project will be selected.
    If you want to transfer only a single subobject of the whole project then first deselect everything.
    Deselection can be done by clicking on the description besides then project name.
    After that just select the individual object.
    Then press the export button.
    It will prompt you to save the lsmw in your local machine.
    Save it.
    Similarly Import it to the production system.
    Please note that your changes in the read program will not be copied via import export.
    You will again have to make it in the production system.
    Changing the read program is not advisable as the changes will be lost if someone once again regenerates the progrsm.
    Regards,
    Ankur Parab

  • How to Transport OMT3R changes to other Clients.

    Hello All
    I have done the changes to MM01 Screen sequence using transaction OMT3R.
    But while saving it did not ask for transport request.
    Transport option is grayed out and not able to know include it to any transports.
    Can any one tell me how to inlcude this changes into a Transport Request and move it to other clients?
    Thanks & Regards
    Madhu K

    Hi Madhu,
    the values of tcode OMT3R ('Maintain Order of Main and Additional Screens') are saved in database table T133D ('Sequence Control forLogical Screens').
    If these values are missing on the target system, note 108059 ('Transport of Customizing settings made in OMT3') applies. Please proceed as described there to transport table T133D, too.
    Regards,
    Mauro

  • How to transport wdj project code from one server to other server?

    Hi, experts,
    I development 100 wdj component and deployed them to development server(A_development_server).
    I have download sca file of my WDJ project from A_development_server.
    I have config the SLD and Track in the other development server(B_development_server).
    I don't know how to transport the project code from A_development_server to B_development_server for download the project code ?
    Do you give me some hint?
    Best regards,
    tao
    Edited by: wang tao on Mar 12, 2010 4:41 AM

    Hi Wang,
    You can directly deploy project from A_development_server to B_development_server. For that you need to Define Runtime details under RUNTIME tab in landscape configurator for B_development_server in CMS. To access CMS, go through http://host:port/devinf
    Automated Deployment into Multiple Production Systems
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/44/355093ba830a67e10000000a422035/frameset.htm
    Getting Started with the Development Infrastructure 
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/44/0d18d725301a78e10000000a1553f6/content.htm
    Hopt it helps
    Regards,
    Arun

  • How to copy Partner Procedure from Downstream Template to all other clients

    Hello,
    My problem is SAP std Partner procedures (e.g. OTR) is not available in our freshly installed IS Oil Client. I found out SAP note no. "100151 - TD Partner procedures in IS-Oil bulk shipment" which is identical to my problem. However the said note does not contain how to copy Partner Procedure-OTR from Downstream Template to all other clients.
    Can any one guide me in this area?
    Thanks & Regards,
    Aniruddha

    Hello Aniruddha,
    Partner determination configuration must be transported by creating a
    manual transport.
    Please refer to note 69385 and also notes listed in the "Related Notes" section for more details.
    Best Regards,
    Soumya

  • How to transport a Screen variant from one system to other

    Hi All,
    I created a screen variant in Dev. It was included in a transport request. But when I transported the request to Quality, The transaction is not behaving according to the screen variant. i.e. Screen variant has not got transported there.
    Please help me out what can be done in this regard.
    Thanks a lot.
    Himanshu

    Check the status of the request which u have transported, whether it includes the screen variant also.

  • How to transport a deleted query?

    I have deleted one query in developmeny system. I thought it will ask for tranport request.But it did not ask for any transport requast.Now it is deleted from development system.Please let me know how to transport this change in production?

    Hi Saikat,
    Was this query transported to the prod system, or created directlyin prod? If you have transported the query, you would not be able to delete without first assigning a transport request to the BEx dev class...check if there is any request assigned to the BEx dev class (RSA1 > transport connection)
    Hope this helps...

  • How to transport standard text in SO10 to different system.

    Hi,
    I need to change the standard text in SO10. I need to change the custom text. We have a custom text id (zval) associated with it. How to transport the changes i have done from Dev to Quality to Production.
    I wanted one clarification: when we create the transport manually, whether only those changes what i have done for the text can be transported or it will include all the other text which are initially present (like table entries). From the program RSTXTRAN, can you give the what are the inputs need to given.
    Please let me know regarding this. Thanks in advance

    Steps..
    Create a work bench CR in the transaction SE09..
    Modify the task to Development correction / Repair..
    Go to the program RSTXTRAN..
    In the name of correction give the task number (Not the CR number)
    Give the Text Key..Your standard text name..
    Press F8...
    Press select all..
    Then Press enter..
    Then press the button "Trsfr texts to corr".
    Now the standard texts will be moved to a CR..
    Then release the CR and move it to QA..

  • How to transport generated reports through report painter

    Hi All,
    We are upgrading from 4.6 to ECC6. Previously somebody created reports for Finance  through report painter, now in the new system they are two to three system generated reports which are produced by report paintyer (I guess) are retrieveing wrong data.
    So I debugged the generated reports and found two locations
    1. generated report as syntax error
    2. at selection it is having an additional filter with company code for each table  like coss, cosp, cospp which I dont find that filter in the old 4.6 generated report, I modified the generated report but problem is that it dont give me any transport number.
    So these reports are client specific, can any one suggest me how to transport these changes to quality and production environment.
    I tried with transaction GCTR , but it is failing when it is released.
    Can any one suggest me.
    Thanks
    Tangudu

    No better manual than SAP help!
    Below is the link to Report Painter
    http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
    Regards
    Sreenivas

  • How to send the transport request from one client to other client?

    Hello Friends,
    I have generated one transport request in one of the client in Development server.Now as it is  customizing request so unless and until i transport it to other client within the same server, Changes will not be visible in other clients.So how to transport this customizing request from one client to other client within the same server.
    Thanking you guys in advance.
    Regards,
    Jitendra

    Hi Jitendra,
    Release your Transport Request via SE10, then go to STMS & import the request first to your quality server, then to your production server.
    Apologies for the incorrect inputs, please use SCC1 as advised by other forum members
    Hope the above clarifies your query.
    Regards,
    Vivek
    Edited by: Vivek on Mar 16, 2009 1:05 PM

  • How to see the change logs for billing document

    Dears,
    Could you please how to see the change logs for billing document.
    My client is using ECC 6.0 & if i use VF03 > Environment > changes > does not show the changes i had made.
    Thanks in advance
    Ranjan

    hello, friend.
    you should be able to see changes done after the initial creation and saving, by going thru Environment > Changes.  try it again, and this time make sure that changes were done to the billing document prior to posting to accounting.
    normally, when configuration of Billing is done correctly, there will be little or no instances of changing anything in the Billing document,  as saving the document after creation will post this to Accounting.  of course, inclusion of a posting block in the billing type will provide you the opportunity for changes. 
    regards.

  • How to transport changes made in SE36 -  Dynamic Seletion for BRF

    Hi Friends,
    Please guide me how to transport or assign a request for the changes made in BRF selecion view.
    I have assigned and added BKPF-XREF1_HD field for FB03 transaction. Its working fine as per user requirement.
    I am facing probelm to assing a transport request for that. I didn't find any transport menu in se36.
    So please provide me how to assign a TR which need to import into Production client.
    If I have to assign or create a program (standard), then please provide me the program name.
    Please reply.
    Thanks & Regards
    Sankar.
    Edited by: sankar babu on Jul 29, 2010 12:26 PM

    Solved

  • How to Transport changes made to tool Area

    Hi
    According to my requirment
    i had to remove a Portal Search option from Tool Area.
    My requirment is to removie it from the theme as we don't need it
    I performed the following
    Go to Content Administration
    Portal Content--> Content Provided by SAP->End User Content-> Standar Portal Users
    From Default frame work page.Open the same and untick the Visible Check box beside tool area iView in the frame work page.
    Now how can i transport these changes from DEV Portal to QUA Portal
    Thanks

    You can transpor the pcd content using
    Import/export options in SystemAdministration->Transport
    But I am afraid that you cannot transport the standard pcd content as its id starts with sap.com.
    Best of doing is Don't do any changes to the standard default framework page
    Instead of that... you duplicate it and change the id of the framework page then export it
    and import in the target portal as said above.
    Use that imported frameworkpage in your dekstop.
    Raghu

  • How to transport changes made on Workflow Template to other cleint

    We have make changes to Workflow template via tcode PFTC_CHG (Change Task), with workflow builder screen, we make changes on the standard task, work item text etc, save the changes to workflow template WS90000XXX. However the changes we make is not save under a Transport Request number.
    How to make the changes on workflow template to save under a transport request and transport it to other client. ?

    Hi Eric,
    All development and customization of workflwo are saved in a transport request.
    If while making the changes it did not prompt you for a TR then check the TR in whcih the task was created.
    To port TRs follow the below procedure:
    1. Go to t-code SCC1.
    2. Select the transport request number and enter the source system (client)
    3. Click on 'Including Request Subtasks.
    4. Click on button 'Start immediately'
    This would port the TR.
    Please note to port workbench TRs before the customizing TRs.
    Regards,
    Saumya

Maybe you are looking for

  • Can not boot into OSX after boot camp installation and resizing of Macintosh HD

    So from the beginning what I was trying to do was set up my iMac (27-inch, Late 2013)  with boot camp so that I could play some old windows based games that can not be played in Parallels. I went through the Boot camp process and everything set up ju

  • From PDF to Word DOC

    When I attempt to convert a multiple page MS Word 2003 doc (25 pgs) to PDF using Adobe Std 9, it works. When I attempt to take that same PDF and convert it back to WORD using the feature within Adobe Acrobat 9 Std FILE - EXPORT - WORD DOCUMENT, Adobe

  • Company Code One Vs multiple

    Hi Experts, I would like know that if we merge multiple company code to one company code. then what would be legal impact and vice versa. Regards,

  • How do I open exec file?

    I apologize in advance if this post is categorized incorrectly. This was the best possible thread I could find for it. Any way.., here's the issue that I'm having. I had a .sitx file that contained a bunch of midi files. The .sitx file was on a parti

  • No Order Found

    Last night, I ordered a Samsung Focus 2 4G for AT&T, and I got an email confirming the order, but when I check the order status on bestbuy.com, it says no orders found.  However, when I call and check the order status, it says that it is being prepar