How to trigger a Job on cancellation of another Job ?

Hi Friends,
I have a requirement stated as below.
We need to trigger a Job (JobB) on cancellation of another Job (JobA). This needs to happen on a periodc basis.
If JobA is success then we dont need to run JobB.
Could you please let me know how to acive this.
Regards,
Ravi Kasnale

Try this,
goto SM36 & create a job say job name "Job_test"
Define a Job Step,
choose an ABAP program say Zjob_start
before this step Write an ABAP program "Zjob_start" which can,
check status of "JobA"
Use FM's mentioned by other members in this post.
Check the status of JobA
If its cancelled start your new job.
by some FM's mentioned by other members in this post.
The start conditions for Job_test should be "After Job"
& mention JobA in the parameter unchecking the checkbox & finish.
Try, this may work.

Similar Messages

Schedule job with dependencies in another job

Hi All,
I Have a job in sm36 schedule but I want to create a new job and will be started after my first job,
for exemple : I have a job Test1 started in 30 and 30 minutes and I create a new job test2 that this job has to executable after the job test1, I can to do this but my slave job only executable one time, I need that this job stay continued always after job test1 and don't finish.
Thank for Help.
Regards,
Osvaldo Antonio dos Santos

Hi,
I am afraid your reqmt may not be possible.
You can very well run one job after another job by maintaining the After event parameters in SM36. However you cannot enable a job run for ever. Once there is no input meeting the selection criteria, teh job will finish.
Instead of thinking of enabling the job for ever, you can maintain the jobtest2 as after event of jobtest1.
After that you can create jobtest3 using the same variant of jobtest2 and schedule it to run once in 15 min or 30min or so.
Hope this helps you
Pls reward if it is of some help to you

How to trigger a process chain after R 3 job

Hi All,
We have a requirement to trigger a process chain immediately after the completion of R 3 job.
could you please give me your input in this regard.
rama

Try to Search first. This has been discussed a lot in this forum.
Try these:
Triggering a Process Chain From R/3 pgm
There is even an OSS Note on how to do this:
Trigger process chain using event

Cancelling a periodic job

Hi ABAP gurus,
I would like to seek help in the use of the FM BP_JOB_ABORT. I need to cancel a periodic job and need to cancel all occurences of the job. When I used this FM, it only cancelled the active job and still created another job meant to run for the next period. Hope someone can help me on this. Thanks in advance.

Go to the Job definition in transaction SM37 and remove the Periodic Job specification.

SQL SERVER AGENT job dependent on another job

Hi
I have 2 Sql Server Agent jobs that run on a daily basis.
One which is run first but is dependant on another job completing.
The secone runs every 30 mins between 9:00am to 7:00pm.
If my first Job hasn't run but the 2nd job does start running the 2nd job will fail.
Is there away with SQL servent agent where if my first Job hasn't run then don't run the 2nd job?
Regards

Hi aivoryuk,
According to your description, if you set one job is dependent on another job, when the first job does not run or execute failed, then the second job will not run. I recommend you use two steps to instead of this two jobs. In step Advanced page, we can set
that the first job execute successfully then go to the next step. Or else, it will quit the job and report a failure.
The other way is that we create new job with the same schedule as the second job , in this job , we can check the first job status with the sp_help_job stored procedure, then you can use sp_start_job to Start
the second job. For more information, you can review the following post.
http://social.technet.microsoft.com/Forums/en-US/d5cb4004-02fb-4b41-a321-5197f8105941/sql-server-agent-making-1-job-dependent-on-another?forum=sqltools
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

How to trigger an event when a job is cancelled

Hi,
Can anyone help me out wid a transaction that will trigger an event when a job is
cancelled....??
My scenario is :
When a job is cancelled (SM37) or in cancelled status i want notify to certain ppl thru emails.
How do i go abt doing the same??
Its Urgent...
Answers will be rewarded.
regards,
Rohan

Hi,
please check out the link below it might help you
http://help.sap.com/saphelp_nw2004s/helpdata/en/71/a8a77955bc11d194aa0000e8353423/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/97d2e8b3-0b01-0010-b787-b8ce558a51c2
for table name and list of function please check out the links below it will help you
http://www.erpgenie.com/sap/abap/tables_system.htm
http://www.sap-img.com/abap/function-list.htm
**************please reward points if the information is helpful to you**********

BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?

Hi All.
I have this request.
BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?
We have jobs scheduled on BODS running smoothly and absolutely fine.
But to check, i am logging into the admin console and check for the jobs status.
I would like to have an email to be received from BODS after each job is finished.
It could succuessful. Or it could fail.
Whatsoever, i wish to receive an email alert as soon as a job is finished.
Can anyone advise me as to whether this could be made possible.
And if yes, how this could be done.
Thanks for your help in advance.
In BOE CMC / for webi / schedule / we find an option to send email for a job success or a job failure.
Is there any option similar to that in BODS ?
Also would like to know :
how to use the smtp_to or mail_to functions ?
how to set up the smtp server for this ?
thanks
REgards
indu
Edited by: Indumathy Narayanan on May 31, 2011 3:47 PM

Hi.
Since am new to this BODS. I need some help.
I already have many jobs which are running absolutely fine.
And when a job runs, and finishes, am able to see the trace saying
e.g. :
Job_abc is completed successfully.
We got the smtp service activated for our test server.
and we hae a group email id.
I have put the details of the smtp server / ip address / and said apply restarted.
The i created a simple test script as below :
print (' Before email ' );
smtp_to('abc@company_name.com', 'Job ' || job_name() ||' on ' || host_name() || ' has FAILED',
' the job has failed', 0, 0);
print('After Email ');
It does send a email to as per smtp_to whatever email is specified.
But how to differentiate between a job success
And a job which has failed.
I wish to have a mail which says on the subject :
'Job ' || job_name() ||' on ' || host_name() || ' has completed successfully'
==> IF it is a success
OR
'Job ' || job_name() ||' on ' || host_name() || ' has failed'
==> if it has failed
How to make the system identify, whether
to send a success message or a error message whatever
Could anyone advise.
thanks
indu

How do I cancel a print job from my computer to my HP Photosmart 7510. Touchscreen is unavailable.

HP Photosmart 7510 All-in-One CQ877a Model C3112; Operating system Windows Vista 64-bit.
Can't find how to easily cancel a print job. The touch screen is unavailable during the printing process (just shows the HP icon spinning around during the print process). There isn't a "cancel" button or touch area to cancel. We're wasting ink and paper by not being able to cancel jobs easily. Read the 24-page manual and it doesn't mention it. Looked on line for an answer, can't seem to locate one. Can always go to Start, Printers, and select the printer and then cancel from within there, but by then, the job is finished.

There should be a cancel button (X) on the printer. Check out the pic below taken from page 7 of the User manual for your printer:
http://goo.gl/mW7Fy
Alternately, instead of going the Start button route, did you check out the Final tip at the bottom of the article?
"Final Tip (Shortcut)
Before using the method above to open the print queue, look for the printer icon in the notification area. If you see it, double-click it to bring up the print queue. "
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

How to change the user of a cancelled background (batch) job?

Hi All,
I have a batch job which is being cancelled as the reference user account is locked. I want to update the job with a new user.
How can I change the user for a cancelled job? I am able to change the user for a scheduled job (by right clicking the job >> Change) but not for a cancelled job.
I am getting the error: "<<Job Name>> cannot be changed due to its status" when trying to change the cancelled job.
Please help.
Thanks
Vijay

Hi Vijay,
change the user of a cancelled background (batch) job
1) Goto <b>SM37</b>
2) Select the cancelled job and goto menu bar select <b>Job</b> ) click on change.
3) Click on step tab
4) Select the job and click on change tab. Change the user name and save.
regards,
kanthi

How to cancel a print job in progress

I have a HP C5580. When i was using Windows ME on my former PC, I could easily go to Printers, select the 5580, hit documents in queue, and hit cancel , and the printer stopped.
Got a new Compaq PC with Windows 7, and I can't figure out how to cancel a print job mid stream. I go to Printers and Devices, giet the page that allows me to view the print jobs in queue, I hit "print job in process", but the "Cancel" is not in bold print and I can'tfind any other way to cancel the job.
Help !

The easiest way to cancel a print job would be by pressing the cancle button on the front panel. This is the "X" button near the right side of the control panel, see pages 10 and 11 of the user manual here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How to trigger an existing background job in ABAP program?which fm?

Hi experts,
    how to trigger an existing background job( defined in SM36 ) in ABAP program?which fm?
    seems that FM 'JOB_OPEN' / 'JOB_SUBMIT' / 'JOB_CLOSE' can only create a new job.

Hi,
    now my requirement is that sap has generated one job automatically, and then i will have a job name
'XXX'. and then i want to schedule the job in abap program,. which function module could i use ?
my expected fm is that the system will trigger the job after i give the job name and start condition.
i have tried job_open, but it seems just to create a new job. any advice ?

How to send a mail to the user when a job gets canceled?

Hi experts,
                  I need to send a mail when a job gets canceled to the user.I know the FM for sending mail and i can find if a job is canceled from tbtco,but i want to know how to send the mail from the same program ,once it got canceled ?
thanks in advance,
helpful answers will be awarded with points
regards,
ashwin

Hi Ashwin
Use the below peace of code:
REPORT ZBCJOBMONITOR .
TABLES: SOMLREC90,
        TBTCO.
DATA: MAILDATA   LIKE SODOCCHGI1.
DATA: MAILTXT    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: MAILREC    LIKE SOMLREC90 OCCURS 0 WITH HEADER LINE.
DATA: I_TBTCO    LIKE TBTCO OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001 .
SELECT-OPTIONS: S_JOB FOR TBTCO-JOBNAME.
SELECT-OPTIONS: S_JOBC FOR TBTCO-JOBClass.
SELECT-OPTIONS: S_REC FOR SOMLREC90-RECEIVER.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
CLEAR:    MAILDATA, MAILTXT, MAILREC, I_TBTCO.
REFRESH: MAILTXT, MAILREC, I_TBTCO.
PERFORM GET_ABENDED_JOBS.
PERFORM BUILD_RECEIVERS.
LOOP AT I_TBTCO.
    PERFORM BUILD_TEXT_MESSAGE.
    PERFORM SEND_MAIL_NODIALOG..
ENDLOOP.
     Form BUILD_TEXT_MESSAGE
FORM GET_ABENDED_JOBS.
SELECT * FROM TBTCO
          INTO CORRESPONDING FIELDS OF TABLE I_TBTCO
                     WHERE JOBNAME IN S_JOB
                       AND STATUS = 'A'
                       AND JOBCLASS IN S_JOBC
                       AND SDLSTRTDT = SY-DATUM.
ENDFORM.
     Form BUILD_TEXT_MESSAGE
FORM BUILD_TEXT_MESSAGE.
DATA: DATE(10) TYPE C.
DATA: TIME(10) TYPE C.
MAILDATA-OBJ_NAME = 'MONITOR'.
MAILDATA-OBJ_DESCR = 'Batch Job Monitor'.
MAILDATA-OBJ_LANGU = SY-LANGU.
CONCATENATE 'Job Name:' I_TBTCO-JOBNAME
              INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
PERFORM FORMAT_DATE USING I_TBTCO-SDLSTRTDT
                            DATE.
CONCATENATE I_TBTCO-SDLSTRTTM+0(2) ':'
              I_TBTCO-SDLSTRTTM+2(2) ':'
              I_TBTCO-SDLSTRTTM+4(2)
                 INTO TIME.
CONCATENATE 'Start Date/Time:' DATE TIME
            INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
CONCATENATE 'Job Class:' I_TBTCO-JOBCLASS
            INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
MAILTXT-LINE = 'Job has terminated abnormally'.
APPEND MAILTXT.
ENDFORM.
     Form BUILD_RECEIVERS
FORM BUILD_RECEIVERS.
LOOP AT S_REC.
    CLEAR MAILREC.
    MAILREC-RECEIVER = S_REC-LOW.
    MAILREC-REC_TYPE = 'U'.
    APPEND MAILREC.
ENDLOOP.
ENDFORM.
     Form SEND_MAIL_NODIALOG
FORM SEND_MAIL_NODIALOG.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
       EXPORTING
            DOCUMENT_DATA              = MAILDATA
            DOCUMENT_TYPE              = 'RAW'
            PUT_IN_OUTBOX              = 'X'
       TABLES
            OBJECT_HEADER              = MAILTXT
            OBJECT_CONTENT             = MAILTXT
            RECEIVERS                  = MAILREC
       EXCEPTIONS
            TOO_MANY_RECEIVERS         = 1
            DOCUMENT_NOT_SENT          = 2
            DOCUMENT_TYPE_NOT_EXIST    = 3
            OPERATION_NO_AUTHORIZATION = 4
            PARAMETER_ERROR            = 5
            X_ERROR                    = 6
            ENQUEUE_ERROR              = 7
            OTHERS                     = 8.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
     Form FORMAT_DATE
FORM FORMAT_DATE USING IN
                       OUT.
CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
       EXPORTING
            DATE_INTERNAL            = IN
       IMPORTING
            DATE_EXTERNAL            = OUT
       EXCEPTIONS
            DATE_INTERNAL_IS_INVALID = 1
            OTHERS                   = 2.
ENDFORM.
Regards,
Sree

How to trigger a mail once BG job finished.

Hi,
Could anyone please let me know how to trigger a mail once Background job finished. I let you give one scenario where exactly I require this concept. Say, I execute t.code MB52 with particular variants in background to find stuck qty(s) of material(s) in given site(s).Now I want that system will trigger a mail to concern team once job finished.
Thanks,
AK

You can try using workflow transaction SBWP.
you need to create a distibution list in the above transaction and add the requested mail ids to it.
then when you create a jon using transaction SM37 you have the option SPOOL LIST RECIPIENT where you can add the created distibution list
so when ever the job has run sucessfully then a mail is sent to all the mail id's in the list.
hope this helps.
cheers
sundeep

How to trigger IDOC in a batch job?

hi,
My requirement is that a batch job must run on R/3 side to check if bank data are created or changed.Any creation or update in table BNKA will trigger an IDOC
If a record is created IDOC BANK_CREATE01 should be triggered and
If a record is changed/deleted IDOC BANK_CHANGE01 should be triggered
A background program should run periodically (every hour) and check the table CDHDR for object class BANK.
The program must check if any new entry exist in the table since the last run.
New records can be identified according to the fields UDATE and UTIME.
According to the change indicator (CHANGE_IND) the program will determine if the IDOC_CREATE (changeID=I) should be run or IDOC_CHANGE (changeID=U or D).
If change ID=D, then deletion indicator will be set in the CHANGE IDOC.
Can anybody tell me how will i write the code for this and how to trigger IDOc as i very basic knowledge in ABAP
Thanks & Regards,
Loveena

hi
whenever changes made to an application document.u want to replicate these changes in target system u have to work with cahngepointers
RBDMIDOC is the program which u have to schedule background
regards
Nagesh.Paruchuri

Trigger mail when backgroung job is cancel

Hi,
I want to trigger a mail to outlook when background job in sap gets cancel
Regards
Gopal

Hi Gopal
Have u read through [This|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/97d2e8b3-0b01-0010-b787-b8ce558a51c2] document?

How to trigger a Job on cancellation of another Job ?

Similar Messages

Maybe you are looking for