How to trigger alert (SALERT_CREATE) from remote R/3 system? Help!

Hi Experts,
     Here is my business reqmt:
XI reads inventory file and makes a RFC Function module (YREAD_INVDATA) call to R3 system.
In R3 system function module I have written business validation logic.
If any validation fails then I have to trigger alert. The CCMS alert is setup in the XI system. So to trigger alert I am making a RFC call (CALL FUNCTION SALERT_CREATE DESTINATION 'SYXI250'...) to XI.
    In order to make a RFC call can I use TYPE 3 RFC destination?
    Do I need to use TYPE T (TCP/IP) RFC destination?
    If I use TYPE T then I am getting error saying "no sender agreement and no receiver".
    Since I am making a call to function module in XI system and there is no other receiver after that how do I configure a receiver for this?
    Please help me!
Thanks
Gopal

Hi -
At least for what you're trying to do, consider below:
>>>The CCMS alert is setup in the XI system. So to trigger alert I am making a RFC call (CALL FUNCTION SALERT_CREATE DESTINATION 'SYXI250'...) to XI.
So SALERT_CREATE in the XI system is actually your receiver interface in this scenario.
>>>Do I need to use TYPE T (TCP/IP) RFC destination?
Yes.
>>>Since I am making a call to function module in XI system and there is no other receiver after that how do I configure a receiver for this?
As mentioned above, XI (technically at least) is the receiver and SALERT_CREATE is the receiver interface. The sender would be your R/3 system and the sender interface would be just a stub of SALERT_CREATE. So in R/3 you could create a customer, remote-enabled RFC (Z_SALERT_CREATE) that's just a stub (no implementation of SALERT_CREATE, just parameters) and call this from the R/3 side (e.g. CALL FUNCTION Z_SALERT_CREATE DESTINATION 'SYXI250'...).
Of course, you would need to import the metadata for your custom Z_SALERT_CREATE (and SALERT_CREATE if not already) RFC as an imported object to XI. You'd need a sender agreement for R/3 sender and Z_SALERT_CREATE RFC as well.
Regards,
Jin

Similar Messages

How to trigger Alert with Event Linkage?

Hi,
Can any one tell me the process how to trigger alerts with event linkage? I am successul in triggering by calling function module SALRT_CREATE_API.
my scenario is...
when a purchase order is cancelled, i have to trigger an alert to the concerned department head throgh Alert Inbox and external mail also.
Plese guide me..
Regards,
Dhanunjaya Reddy

Hi,
now i am getting alerts from Event Linkage.
Here i take the scenario Sales order change.
BOR object : BUS2032
Event : Changed
Receiver type : <my alert>
Receiver call : Function Module
Receiver Functiona Module : SALRT_CREATE_VIA_EVENT
Linkage is activated.
when a sales order is changed receiver function module triggering the alert which is defined in Receiver type. That i am getting in my alert inbox. Upto this.. it is cleared.
Now the scenario is.. about Alert Container
in alert container i take element is BOR Object type BUS2032.
the questions are..
1. Is it correct to defined BOR object here to get data when Sales order has been changed.
2. What are the properties i have to take in Properties tab?
3. How to use alert container parameters in short and long text?
Here my clear intention is when a sales order is changed.. i have to get the data related to that sales order and it has to show in Alert.

How to Trigger an IDOC from SAP R/3 to two systems at a time

Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELVRY03 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once. We need to write a logic to route the same to two different systems
Can any one tell me how can we do that ?
Regards
Ram.

Hello Ram,
Do you have connectivity between your production & XIQ?
What does "connectivity" mean?
1. RFC destination is maintained.
2. Port defined for the RFC destination.
If no, create these. (Search in SDN for details).
If yes, proceed:
1. Define the logical system for XIQ.(BD54)
2. Define the same as your partner profile. (WE20). Add the message type SYNCH with the port for XIQ.(This is imp)
3. Create a distribution model view with sender as "your production" & receiver as XIQ.
3.1. Add the messages which you want to distribute.
3.2 Generate Partner profiles.
No coding is reqd. for this.
BR,
Suhas

How to Trigger an IDOC from SAP R/3 to two XI systems

Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELCERY01 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once.
Regards
Ram.

Hi Ravi,
Thank you very much for your answer.
As I am not completely aware of R/3 side,I am getting little problem in understanding your answer.
Could you please explain the same in some what beter way.. Thank you ..

HOW TO TRIGGER AN WORKFLOW FROM A PROGRAM ?

HELLO THERE ,
CAN ANYBODY PLZ TELL ME HOW TO TRIGGER AN WORKFLOW FROM AN PROGRAM AND TO PAS THE VALUE TO THE CONTAINER ?

Hello Neon,
If you want to trigger the workflow directly, use the FM, SWU_START_WORKFLOW
CALL FUNCTION 'SWU_START_WORKFLOW'
EXPORTING
 task =
* LANGUAGE = SY-LANGU
 user =
* SENDER_ID =
* IMPORTING
* RETURN_CODE =
* WORKITEM_ID =
tables
* CONTAINER =
* MESSAGE_LINES =
 attachment_list =
A workflow can also be triggered by and event which is in turn triggered by a program.
By the FM, SWE_CREATE_EVENT
Example:
w_key = 'Connie'.
w_creator-otype = 'US'.
w_creator-objid = 'SAPDEV02'.
CALL FUNCTION 'SWE_EVENT_CREATE'
 EXPORTING
 objtype = 'YH_BUDDIES'
 objkey = w_key
 event = 'event'
 creator = w_creator
* TAKE_WORKITEM_REQUESTER = ' '
* START_WITH_DELAY = ' '
* START_RECFB_SYNCHRON = ' '
* NO_COMMIT_FOR_QUEUE = ' '
* DEBUG_FLAG = ' '
* NO_LOGGING = ' '
* IDENT =
* IMPORTING
* EVENT_ID =
* TABLES
* EVENT_CONTAINER =
 EXCEPTIONS
 objtype_not_found = 1
 OTHERS = 2
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
 WRITE: / 'EVENT TRIGGERED'.
ENDIF.
COMMIT WORK.
Hope it helps you.
Regards
Indu.

How to trigger an interface from a database(COBOL) in online mode?

Hi everybody,
Can you please tell me how to trigger an interface from a database(COBOL) in online mode?
thanks a lot,
Ramya Shenoy

If you can make a HTTP call from you DB platform -
HTTP -> BPM (Receive -> Send Step (execute an SP or your select statement here in the JDBC receiver channel) -> send (to target) )-> end.
VJ

How to trigger IDOC'S from SAP

Hi All,
How to trigger IDOC's from SAP(ECC 6)..where can we check this in mii 11.5 weather it is fail/success
Thanks,
Abhi

You can trigger LOIPRO, LOIPLO and a few others manually from POIT (SAP Txn). Master Data related to orders can be triggered from POIM. Depending on which IDocs you which to generate, there are other transactions to trigger different IDocs.
You can also use Triggers from MII to generate IDocs in SAP using CLOI_DOWNLOAD_TRIGGER_MDAT (POIM equivalent) and CLOI_DOWNLOAD_TRIGGER_TRANS (POIT equivalent).
There is also a rather nice post which detailed the process of using change pointers to automate the IDoc generation and download, but I am having trouble finding it. Will continue to look and will post link when I find it.
Regards,
Mike
I couldn't find the post I was looking for, but there is an informative note 390635 which may help.
Edited by: Michael Appleby on May 5, 2009 1:29 PM

How to trigger sender rfc from r3 system

Hi experts,
can any body send documents about " how to trigger sender rfc from r3 system"
regards
sandeep.

HI Sandeep,
To send RFC data on timely basis you can schedule the programs.
In Partner Profile use setting collect program. Use program RSEOUT00 to send data at particular time.
You can schedule the report RSEOUT00 according to your requirements. So it flushes all the idocs in the background as per your schedule this program.
Plese refer the below thread, it will help you.
Re: Triggering Idocs from sender side
Idoc triggering from a transaction
Cheers..
Vasu
** Reward Points if found useful **

How to trigger alerts..

Hi frendz..
i have little problem abt "how to trigger alert"
I have successfully created XI Alerts using ALRTCATDEF. But, it seems, the email is not coming. Do we have to trigger them also? If yes, please provide some document which specifies how to trigger Alerts.
thanx pankaj..

For more details have a lok on these

For email alerts
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
/people/sap.user72/blog/2005/01/14/alert-management--improving-monitoring-of-your-landscape
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
You have to do SMTP Configuration for EMail and SMS.....
http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
Alerts
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-stepCheck out these:
RWB- Alert Configuration LInk isnot working
Unable to login into Alert configuration
Thanks!!

APD process is active, How to trigger the data from BI to CRM table

Hi All,
I want to send data from BI system(using APD method) to CRM table (ADS method).
I am able to see the table for e.g ABCD in CRM system , i can open using SE11 , but data is 0.
In BI , i have data in DSO and i have mapped it in APD process to data Target to CRM system and APD is active.
Now i want to know how to trigger the data from BI to CRM table? (e.g ABCD).
Please let me know the steps.
Regards.
Nithi.

Hi
Just create a Process Chain to execute this APD method, if the process Chain is already available, then just insert this Process in to the process Chain and execute the Process Chain by normal process, by hoe we do in general.
Hope it solves...

How to extract Inventory data from SAP R/3 system

Hi friends How to extract Inventory data from SAP R/3 system? What are report we may expect from the Inventory?

Hi,
Inventory management
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
How to Handle Inventory Management Scenarios in BW (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Loading of Cube
ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
Non-Cumulative Values / Stock Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Here you will find all the Inventory Management BI Contents:
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
2LIS_03_BX- Initial Stock/Material stock
2LIS_03_BF - Material movements
2LIS_03_UM - Revaluations/Find the price of the stock
The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
detailed level (material, plant, storage location and so on). At this moment, the opening
stock is the operative stock in the source system. "At this moment" is the point in time at
which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
documents are to be posted during this run and so the stock does not change during this
run, as we will see below). It is not possible to choose a key date freely.
The second DataSource (2LIS_03_BF) is used to extract the material movements into
the BW system. This DataSource provides the data as material documents (MCMSEG
structure).
The third of the above DataSources (2LIS_03_UM) contains data from valuated
revaluations in Financial Accounting (document BSEG). This data is required to update
valuated stock changes for the calculated stock balance in the BW. This information is
not required in many situations as it is often only the quantities that are of importance.
This DataSource only describes financial accounting processes, not logistical ones. In
other words, only the stock value is changed here, no changes are made to the
quantities. Everything that is subsequently mentioned here about the upload sequence
and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
This means a detailed description is not required for the revaluation DataSource.
http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
These are the standard data sources used for Inventory extraction.
Hope this helps.
Thanks,
JituK

How to load master data from SAP R/3 system like Customer master...........

How to load master data from SAP R/3 system like Customer master, materioal master , vendor master.............

Hi Bramha,
Check ...........
Re: master data loading in BI 7.0
/message/4708129#4708129 [original link is broken]
Re: Master data loading.
Regards,
Vijay.

How to subtract a day from the presentation variable @{system.currentTime}

Hello,
How can subtract a day from the presentation variable - @{system.currentTime}
I use the above as a title in the report. However I want to subtract a day from the above variable. How can I accomplish it?
Thanks.

Hi,
Did you try the steps which I mentioned above. You can use TIMESTAMPADD function in many places in your report but I think not in title section of the title view.
Also you can try using Narrative view instead of title view to achieve this. Follow below steos:
* Pull another column in the report and change its fx to TIMESTAMPADD(SQL_TSI_DAY, -1, @{system.currentTime})
* Now go to the Narrative view and add the below text in Narrative section of the view.
Active Person Report as of @1
Here @1 assuming the new column created is placed before all the columns in the request.
* Also set the 'Rows to Display' as 1.
* Delete Title view from the report and this narrative view on top of your report.
Hope this helps.
Thanks

Unable to update software or upload pics from SD card-how do I remove files from startup disk? Please help!

Unable to update software or upload pics from SD card-how do I remove files from startup disk? Please help!

Hello Smile_333
The article below will assist with finding things and help increase the hard drive space for your computer. The best way is to have an external hard drive to copy things to if you do not want to delete and loose things.
OS X Mountain Lion: Increase disk space
http://support.apple.com/kb/PH10677
Thanks for using Apple Support Communities.
Regards,
-Norm G.

How to trigger alerts from UDF for file to file scenario

Hi,
My scenario is something like this.......
I have lookup in which there exists more than one output value corresponding to this one input value.In such cases i need to raise an exception and trigger an alert from UDF so as to inform the functional team.
Now this entire procedure has to be implemeted for file to file scenario.
I am not using any RFC nor do i need a BPM.
Entire scenario should be excuted without BPM and RFC.
Can anyone kindly suggest me as to how to proceed for this so as to trigger alerts
from UDF.
Thanks in advance
Madhu

HI,
Please see the below links
Triggering XI Alerts from a User Defined Function - /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Alerts with variables from the messages payload (XI) - UPDATED - /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
Regards
Chilla

How to trigger alert (SALERT_CREATE) from remote R/3 system? Help!

Similar Messages

Maybe you are looking for