How to trigger an interface from a database(COBOL) in online mode?

Hi everybody,
Can you please tell me how to trigger an interface from a database(COBOL) in online mode?
thanks a lot,
Ramya Shenoy

If you can make a HTTP call from you DB platform -
HTTP -> BPM (Receive -> Send Step (execute an SP or your select statement here in the JDBC receiver channel) -> send (to target) )-> end.
VJ

Similar Messages

  • How to trigger XI scenario from a SQLServer Database?

    We plan to realize the following scenario -> Database(Receiver System) - XI - RFC/BAPI (Sender system)
    What's the best practice/technique to invoke the 'pull' from the SQLserver database ?
    The requirement is to realize this as 'on-demand' initiate i.e. trigger the interface from Receiver system only when it needs the data from R/3
    Thanks in advance.
    Mustafa

    JDBC adapter works with pooling intervals.
    It will pool from time to time (configurable) for changes in some DB, and when that DB is changed, then it will send the new entries to XI and trigger the relevant scenario.
    For your case, I'm not sure which would be the best approach.
    Maybe you could populate some dummy table with a "request data" entry whenever you need it.
    Then, when XI sees this new request entry, it will trigger an interface. There, you could either call a BPM, lookup data in RFC and call another interface back to DB, or you could try async/sync bridge without BPM, using module adapters, as explained in this thread: File - RFC - File without a BPM - Possible from SP 19.
    Not too pretty, but might work.
    Regards,
    Henrique.

  • How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

    How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

    If the data is on a remote server (for example, PHP running on a web server, talking to a MySQL server) then you do this in an AIR application the same way you would do it with any Flex application (or ajax application, if you're building your AIR app in HTML/JS).
    That's a broad answer, but in fact there are lots of ways to communicate between Flex and PHP. The most common and best in most cases is to use AMFPHP (http://amfphp.org/) or the new ZEND AMF support in the Zend Framework.
    This page is a good starting point for learning about Flex and PHP communication:
    http://www.adobe.com/devnet/flex/flex_php.html
    Also, in Flash Builder 4 they've added a lot of remote-data-connection functionality, including a lot that's designed for PHP. Take a look at the Flash Builder 4 public beta for more on that: http://labs.adobe.com/technologies/flashbuilder4/

  • How can i get data from another database SQL Server use database link from

    I have a database link from Oracle connect to SQL Server database with user cdit connect default database NorthWind.How can I get data from another database(this database in this SQL Server use this database link)?

    hi,
    u should see following documentation:
    Oracle9i Heterogeneous Connectivity Administrator's Guide
    Release 1 (9.0.1)
    Part Number A88789_01
    in it u just go to chapter no. 4 (using the gateway),,u'll find ur answer there.
    regards
    umar

  • How to Trigger an IDOC from SAP R/3 to two systems at a time

    Hi experts,
    Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
    My current production R/3 system sends a DELVRY03 IDOC to Production XI system ( Name : XIP) .
    I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
    Problem is production R/3 system triggers an IDOC once. We need to write a logic to route the same to two different systems
    Can any one tell me how can we do that ?
    Regards
    Ram.

    Hello Ram,
    Do you have connectivity between your production & XIQ?
    What does "connectivity" mean?
    1. RFC destination is maintained.
    2. Port defined for the RFC destination.
    If no, create these. (Search in SDN for details).
    If yes, proceed:
    1. Define the logical system for XIQ.(BD54)
    2. Define the same as your partner profile. (WE20). Add the message type SYNCH with the port for XIQ.(This is imp)
    3. Create a distribution model view with sender as "your production" & receiver as XIQ.
    3.1. Add the messages which you want to distribute.
    3.2 Generate Partner profiles.
    No coding is reqd. for this.
    BR,
    Suhas

  • How to Trigger an IDOC from SAP R/3 to two XI systems

    Hi experts,
       Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
    My current production R/3 system sends a DELCERY01 IDOC to Production XI system ( Name : XIP) .
    I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
    Problem is production R/3 system triggers an IDOC once.
    Regards
    Ram.

    Hi Ravi,
      Thank you very much for your answer.
    As I am not completely aware of R/3 side,I am getting little problem in understanding your answer.
    Could you please explain the same in some what beter way.. Thank you ..

  • How to I convert data from oracle database into excel sheet

    how to I convert data from oracle database into excel sheet.
    I need to import columns and there datas from oracle database to microsoft excel sheet.
    Please let me know the different ways for doing this.
    Thanks.

    asktom.oracle.com has an excellent article on writing a PL/SQL procedure that dumps data to an Excel spreadsheet-- search for 'Excel' and it'll come up.
    You can also use your favorite connection protocol (ODBC, OLE DB, etc) to connect from Excel to Oracle and pull the data out that way.
    Justin

  • HOW TO TRIGGER AN WORKFLOW FROM A PROGRAM ?

    HELLO THERE ,
    CAN ANYBODY PLZ TELL ME HOW TO TRIGGER AN WORKFLOW FROM AN PROGRAM AND TO PAS THE VALUE TO THE CONTAINER ?

    Hello Neon,
    If you want to trigger the workflow directly, use the FM, SWU_START_WORKFLOW
    CALL FUNCTION 'SWU_START_WORKFLOW'
      EXPORTING
        task                  =
    *   LANGUAGE              = SY-LANGU
        user                  =
    *   SENDER_ID             =
    * IMPORTING
    *   RETURN_CODE           =
    *   WORKITEM_ID           =
      tables
    *   CONTAINER             =
    *   MESSAGE_LINES         =
        attachment_list       =
    A workflow can also be triggered by and event which is in turn triggered by a program.
    By the FM, SWE_CREATE_EVENT
    Example:
    w_key = 'Connie'.
      w_creator-otype = 'US'.
      w_creator-objid = 'SAPDEV02'.
      CALL FUNCTION 'SWE_EVENT_CREATE'
        EXPORTING
          objtype                       = 'YH_BUDDIES'
          objkey                        = w_key
          event                         = 'event'
         creator                        = w_creator
    *     TAKE_WORKITEM_REQUESTER       = ' '
    *     START_WITH_DELAY              = ' '
    *     START_RECFB_SYNCHRON          = ' '
    *     NO_COMMIT_FOR_QUEUE           = ' '
    *     DEBUG_FLAG                    = ' '
    *     NO_LOGGING                    = ' '
    *     IDENT                         =
    *   IMPORTING
    *     EVENT_ID                      =
    *   TABLES
    *     EVENT_CONTAINER               =
       EXCEPTIONS
         objtype_not_found              = 1
         OTHERS                         = 2
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ELSE.
        WRITE: / 'EVENT TRIGGERED'.
      ENDIF.
      COMMIT WORK.
    Hope it helps you.
    Regards
    Indu.

  • How to search a string from the database?

    how to search a string from the database? starting with some character

    If you're trying to do this in a SELECT, you can use the LIKE verb in your WHERE clause.
    Here's an Example
      SELECT obj_name FROM tadir
        INTO prog
        WHERE pgmid = 'R3TR'
          AND object = 'PROG'
          AND obj_name LIKE 'Z%'.
    In this case it will select every row that obj_name starts with Z. 
    If you wanted to find every row that the field obj_name contains say... 'WIN'  you use LIKE '%WIN%'.
    Edited by: Paul Chapman on Apr 22, 2008 12:32 PM

  • How to select alternate entries from the database table

    Hi Experts,
    can u help me, how to select alternate entries from the database table.
    Thanks

    As there is no concept of sequence (unless there is a field specifically included for the purpose), there is no meaning to "alternate" records.
    What table do you have in mind, what data does it hold, and why do you want alternate records?
    matt

  • How to trigger IDOC'S from SAP

    Hi All,
    How to trigger IDOC's from SAP(ECC 6)..where can we check this in mii 11.5 weather it is fail/success
    Thanks,
    Abhi

    You can trigger LOIPRO, LOIPLO and a few others manually from POIT (SAP Txn).  Master Data related to orders can be triggered from POIM.  Depending on which IDocs you which to generate, there are other transactions to trigger different IDocs.
    You can also use Triggers from MII to generate IDocs in SAP using CLOI_DOWNLOAD_TRIGGER_MDAT (POIM equivalent) and CLOI_DOWNLOAD_TRIGGER_TRANS (POIT equivalent).
    There is also a rather nice post which detailed the process of using change pointers to automate the IDoc generation and download, but I am having trouble finding it.  Will continue to look and will post link when I find it.
    Regards,
    Mike
    I couldn't find the post I was looking for, but there is an informative note 390635 which may help.
    Edited by: Michael Appleby on May 5, 2009 1:29 PM

  • How to trigger sender rfc from r3 system

    Hi experts,
    can any body send  documents about " how to trigger sender rfc from r3 system"
    regards
    sandeep.

    HI Sandeep,
    To send RFC data on timely basis you can schedule the programs.
    In Partner Profile use setting collect program. Use program RSEOUT00 to send data at particular time.
    You can schedule the report RSEOUT00 according to your requirements. So it flushes all the idocs in the background as per your schedule this program.
    Plese refer the below thread, it will help you.
    Re: Triggering Idocs from sender  side
    Idoc triggering from a transaction
    Cheers..
    Vasu
    <i>** Reward Points if found useful **</i>

  • APD process is active, How to trigger the data from BI to CRM table

    Hi All,
    I want to send data from BI system(using APD method) to CRM table (ADS method).
    I am able to see the table for e.g ABCD in CRM system , i can open using SE11 , but data is 0.
    In BI , i have data in DSO and i have mapped it in APD process to data Target to CRM system and APD is active.
    Now i want to know how to trigger the data from BI to CRM table? (e.g ABCD).
    Please let me know the steps.
    Regards.
    Nithi.

    Hi
    Just create a Process Chain to execute this APD method, if the process Chain is already available, then just insert this Process in to the process Chain and execute the Process Chain by normal process, by hoe we do in general.
    Hope it solves...

  • Cisco Prime 2.0 Infrastructure-how to remove unneccessary interfaces from monitoring

    Hello all,
    We have Cisco Prime 2.0 Infrastructure and I would like to know how to remove certain interfaces from monitoring?  For example, I do not need monitoring on some ISDN and FXS/FXO ports.  I am receiving email alerts for ISDN channels going up/down for example.   Thanks.

    take a look at:::
    http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/2.0/user/guide/setup_groups.html

  • How to Insert a record in a database table in debugging mode in production

    Hi,
    How to Insert a record in a database table in debugging mode in production ?
    Waiting for kind response.
    Best Regards,
    Padhy
    Moderator Message : Duplicate post locked.
    Moderator message : Warning. Don't create multiple threads for same question.
    Edited by: Vinod Kumar on May 12, 2011 11:02 AM
    Edited by: Vinod Kumar on May 12, 2011 11:04 AM

    Hi Senthil,
    Regards,
    Phani Raj Kallur
    Message was edited by: Phani Raj Kallur

Maybe you are looking for

  • Timeout of one session destroys the other

    Hi folks, I got a strange problem regarding sso and session lifew time, which drives me crasy. Well, I got two web apps which use FORM authentication which I like to use with sso enabled. sso seems to work fine for my two web-apps App-A and App-B, bu

  • To write into a mime file.

    How do i specify the path for the mime object so that i can write data into it.

  • RGB Channel Curves or Levels

    Hello, I would like to see the ability to adjust the black and white point of the R, G, and B channels independently, as can be done in Aperture and PS, as well as the tone curve for each channel. I like the LR interface and UI approach very much, so

  • Chinese PO printout (Unicode server)

    Hi all, Need some expert advice on chinese PO output. 1)if the purchasing group, payment terms description, incoterms and unit of measure are required to be printed in chinese on the PO, does that mean I have to configure the above in chinese by logg

  • Black X in the report

    Hi When the user is executing the report it is showing a Black X in the report. This is in a standard report S_ALR_87013611. I used to get this earlier for the same report when I used to change the currencies for the report but i used to change back