How to trigger idoc using commnad line?
Hi abap gurus,
anyone knows how we can trigger idoc using commnadline like STARTRFC.EXE.
Please let me know its very urgent.
Thanks,
Jack.
Edited by: Alvaro Tejada Galindo on Feb 15, 2008 2:34 PM
solved on my own
Similar Messages
-
How to trigger IDOC'S from SAP
Hi All,
How to trigger IDOC's from SAP(ECC 6)..where can we check this in mii 11.5 weather it is fail/success
Thanks,
AbhiYou can trigger LOIPRO, LOIPLO and a few others manually from POIT (SAP Txn). Master Data related to orders can be triggered from POIM. Depending on which IDocs you which to generate, there are other transactions to trigger different IDocs.
You can also use Triggers from MII to generate IDocs in SAP using CLOI_DOWNLOAD_TRIGGER_MDAT (POIM equivalent) and CLOI_DOWNLOAD_TRIGGER_TRANS (POIT equivalent).
There is also a rather nice post which detailed the process of using change pointers to automate the IDoc generation and download, but I am having trouble finding it. Will continue to look and will post link when I find it.
Regards,
Mike
I couldn't find the post I was looking for, but there is an informative note 390635 which may help.
Edited by: Michael Appleby on May 5, 2009 1:29 PM -
How to trigger IDOC in a batch job?
hi,
My requirement is that a batch job must run on R/3 side to check if bank data are created or changed.Any creation or update in table BNKA will trigger an IDOC
If a record is created IDOC BANK_CREATE01 should be triggered and
If a record is changed/deleted IDOC BANK_CHANGE01 should be triggered
A background program should run periodically (every hour) and check the table CDHDR for object class BANK.
The program must check if any new entry exist in the table since the last run.
New records can be identified according to the fields UDATE and UTIME.
According to the change indicator (CHANGE_IND) the program will determine if the IDOC_CREATE (changeID=I) should be run or IDOC_CHANGE (changeID=U or D).
If change ID=D, then deletion indicator will be set in the CHANGE IDOC.
Can anybody tell me how will i write the code for this and how to trigger IDOc as i very basic knowledge in ABAP
Thanks & Regards,
Loveenahi
whenever changes made to an application document.u want to replicate these changes in target system u have to work with cahngepointers
RBDMIDOC is the program which u have to schedule background
regards
Nagesh.Paruchuri -
How to trigger idocs(outbound)
Hi SapAll.
here i just created a sample idoc to file scenario in SAP-NETWEAVER-XI/PI7.0 ,i just want to know on how to trigger the list of idocs that i explained below at sender SAP-R/3 side .
MATMAS.MATMAS05
SRVMAS.SRVMAS01
CREMAS.CREMAS04
ACC_EMPLOYEE_EXP.ACC_EMPLOYEE_EXP02.
will be waiitng for a good and quick answer.
bye.
regards.
Varma.BD10 for Matmas
BD12 FOR cremas
BD14 FOR DEBMAS
BD16, BD18 etc..
And once the IDocs are generated use the program RSEOUT00 to push them out. -
IDOC ORDERS05 - need to know how to send IDOC using EAN
Dear Expert,
in my site i have scenario to convert PO for 1 system to SO on other system.
Now my configuration is send IDOC using vendor material.
But I need to change for send with EAN code, and it can create my IDOC to SO (using EAN code)
How can i do?
Thank you for your answer,
@tomStart here:
http://java.sun.com/docs/books/tutorial/getStarted/cupojava/
Also these:
Sun's basic Java tutorial
Sun's New To Java Center. Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
http://javaalmanac.com. A couple dozen code examples that supplement The Java Developers Almanac.
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's Thinking in Java (Available online.)
Joshua Bloch's Effective Java
Bert Bates and Kathy Sierra's Head First Java.
James Gosling's The Java Programming Language. Gosling is
the creator of Java. It doesn't get much more authoratative than this. -
How to trigger idocs when GR is done
Hi Guru's
Need to trigger idoc's when GR(Goods Receipt by Order(Supplier))is done(Idoc type: DELV01, Message type WHSORD).
How can this be done for MIGO as there will not be any output type for MIGO.
(EXample for sales order we do have output type to trigger idocs)
Thanks!Hi Prince,
As mentioned earlier, you can configure output type for ME (Inventory Management) in transaction NACE. You can copy existing WE01 output type and configure your custom type for your suppliers(vendors).
You or functional team has to set up a procedure in NACE transaction to automatic determination of your newly configured output type.
Once you are done with output type configuration, you need to maintain partner profile for your related vendors in transaction WE20. You need to maintain outbound parameters like partner type, role, message type, etc in partner profile.
I think now you are ready testing. Good luck!!
Regards,
Pranav -
Hi,
I did all design and configuration steps and ALE configuration steps for Idoc to file scenario. Can any one tell me how to put idoc that this scenario should work??Hi Pavani,
WE19 -> u can enter either basic type or message type.
click on create
go to menu object->edit control record
there give the receiver system paramters and source system parameters
after that double click on idoc segments, window opens with all the fields, give data and click on Test Idoc outbound processing.
check the status in we02.
Regards,
Ravi. -
How to Trigger IDOC for GR in SAP?
Hi Gurus,
I am making the configs for triggering an IDOC whenever a GR document is posted. Could you please advice on what are the configs need to be done and also on the Message type for the Idocs on the same?
Thanks in Advance,
SaakithyanIt is possible.But you need to maintain output condition record to trigger idoc once GR is posted.
Check below Idoc message types this may help your requirement
MBGMCR01 BAPI Posting of goods mvts with MB_CREATE_GOODS_MOVEMENT
MBGMCR02 Post goods movements with MB_CREATE_GOODS_MOVEMENT
MBGMCA01 Reverse goods movements with MB_CANCEL_GOODS_MOVEMENT -
How to trigger IDoc CLFMAS after saving in transaction MM01 OR MM02
HI,
whenevr a characterististic for a material is created or changed in transaction MM01/MM02 , idoc clfmas should be triggerred with the characteristic values.
whenevr we save in transaction mm02, a user exit EXIT_SAPLMGMU_001 will be called from where v need to trigger the idocs.
Can anybody suggest me how do i trigger the idoc from the user exit
Its urgent
thanks ,
loveenaHi,
You can use any of the FMs in the user exit as per your requirment direct or SMD to trigger the idoc
CLA1_CREATE_CLFMAS
CLA1_CREATE_CLFMAS_DIRECT
IDOC_INPUT_CLFMAS
MASTERIDOC_CREATE_CLFMAS
MASTERIDOC_CREATE_CLFMAS_BY_OB
MASTERIDOC_CREATE_REQ_CLFMAS
MASTERIDOC_CREATE_SMD_CLFMAS
Regards. -
Trigger IDOC using change pointers
Dear All,
We are using change pointers for triggering IDOC's when a cost centere is creaed/changed/deleted.
We are using message type COSMAS for the same.
I have maintained all the necessary settings including Distrubution model.
When a cost centre is created or changed the IDOC is getting triggered ( After executing prgroam RBDMIDOC ).
But when we delete an cost centre the IDOC is not getting triggered.
I am able to see the releated entries in BDCP and BDCPV tables as well as CDHDR and CDPOS tables.
Can any one say how this can be achieved? When a cost centre is deleted then also IDOC should get triggered.
Regards,
SRavanWhen we remove an Cost center it physically gets deleted from the data base.There is no delete indicator as such
-
Hi, how to debug IDOC using se37.
Hello experts:
Thank you in advance for all your replies.
I tried to debug the function IDOC_OUTPUT_ORDCHG like the following in our company(because the structure of IDOCS this morning are totally wrong):
1 I set some breakpoints at IDOC_OUTPUT_ORDCHG .
2 modify a PO with me22n and an IDOC was created because the MESSAGE(on the menu bar) showed that an IDOC is created .
3 the program didn't stop at where I set the breakpoint.
Is there anything wrong how I tried to debug?
couldn't thank you more.
Best regards.
FrankHi,
To debug IDOC
http://searchsap.techtarget.com/tip/0,289483,sid21_gci1268508,00.html
Regards,
Jagadish -
How to trigger button using shortcut keys
Hi Friends i want to trigger a button in java swings using keyboard keys.
for ex: a button called "Enter" either i click mouse or i press ALT+E to trigger it.
Plz give me sample coding if u have
By
vinodTry looking at the tutorials...
http://java.sun.com/docs/books/tutorial/uiswing/events/keylistener.html -
Search idocs using status message EDIDS
Hi,
Is it possible to find out the idocs using status message?
For example, I need the idocs example in test system which has error message "Vendor & is not defined in company code &"
How to search idocs using error message?
Thanks for your help.
Regards,
YogitaHello Yogita
You have to select within table EDIDS directly:
Example:
STATXT = Item &: Only &2 &3 from material &4 are available
STAPA1 = syst-MSGV1
STAPA2 = syst-MSGV2
STAPA3 = syst-MSGV3
STAPA4 = syst-MSGV4
STATYP = syst-msgty (E, W, I, S, A)
STAMID = syst-msgid
STAMNO = syst-msgno
Regards
Uwe -
Is there any way to trigger IDOC using Payment Medium Workbench Format? Or it works only for RFFO* Classical Format?
Regards
SriniHi Mayank,
Ok, I understood your requirement. I am also facing similar problem I am able to generate IDOC's through APP by using classic payment program given in the payment method, in the IDOC's i am able to generate the check number, with out actually printing the same.
But when I want to run F-58 for check printing it is not generating because the program assigned is different.
I will also investigate the PMW scenario, if u r successful pls share the same.
regards
srikanth. -
How to trigger change documents based on inbound-idoc?
Hi experts,
Currently I'm working in on a project where I have to create an interface based on IDOCS. This is an interface for two SAP-HR systems.
If there are made changes in the dialog (gui) by a user, there will be created a change document, which can be displayed by report RPUAUD00. For the inbound-interface based on idocs it's important that there will also be created a change document in the system based on this idoc. We have tested this, but no change document is created.
Can anybody help me to solve this problem: "How to create a change document based on the inbound-idoc?"
Thanks in advance.
With kind regards,
RoyThanks for responding. First, I like the idea of defining an event, but I'm still stuck with how to trigger it. I looked at dynamically registering events, and maybe doing something where a click on the graph control registers an event for key presses on the vi. I'd still have to figure out out to terminate the key press event. Unfortunately, (actually it's a feature I like..) there are a number of different ways to complete typing in a scale change. I routinely use ctr-enter (habit from working on a laptop), though enter works fine, and clicking somewhere else is probably the most common method. I am not that familar with User Defined Events, so I may be overlooking something obvious here.
The graphs are a Bode Plot, with a seperate graph for RPM vs Phase Lag, and RPM vs Magnitude. I want them to always be plotted on the same x-axis. The plot is generated when the user doubleclicks on a dataset. After that, it's just the user looking at it. They can change the axis without any new data being generated.
Thanks,
Chris
Maybe you are looking for
-
Intercompany Text-Based Standard Purchase Order from Production Order
We have a business scenario where a material is made in a plant and then another plant performs a service on that material. The customer wants the purchase requisition that is created from the production order from the producing plant to apply a ven
-
I lost my redemption code to install Lion onto my new computer. Is there a way I could get it again? When I go to the "get the update" page, it says that my serial number already has a code. How do I find this code again?!
-
Aggregation Level Vs Multiprovider
Hi Folks, Can some one can explain me what makes to use Aggregation Levels as we have an option of building Read Input Queries on Multiprovider it self? Is it a mere performance issue or else thats the only way we need to go build a Input Query. Also
-
I know this violates platform independence, but does anyone know of a tool to convert a jar that runs a class based on its manifest into an executable for a given platform (I assume such a tool would merge parts of the JRE with the jar itself)?
-
How to convert Access query to Oracle?
I am trying to convert this query into an Oracle 8i query: - SELECT * FROM EMPLOYEE LEFT JOIN ATTENDANCE ON EMPLOYEE.EMPID = ATTENDANCE.EMPID WHERE ATTENDANCE.COL1="#" AND ATTENDANCE.COL2>=#1/1/2007# AND ATTENDANCE.COL2<Now() GROUP BY EMPLOYEE.EMPID,