How to turn off/on triggering within same IMAQ session

I put together an image acquisition application with a NI 1427 frame grabber and a Basler Aviator camera. I want to be able to switch between continuous (non-triggered) acquisition and triggered (acquisition is not running during the switch).
I can switch from continuous to triggered without reconfiguring the IMAQ session by using the IMAQ Configure Trigger3 VI. However, to go back to non-triggered mode, I tried calling the Configure Trigger3 VI with "Disabled" as the Action but that gave me a "Requested triggering mode is invalid error". I also tried using "Software Trigger" as the Type and that gave me the same error. Is there no way to turn off triggering without reconfiguring the entire IMAQ session?
Thank you for any input.
Vadim

Hi Kira,
Thank you for the response. I tried what you suggested but received an error stating that this was not a valid attribute. So I looked in MAX and saw that I have 2 Camera attributes (I think based on my icd file) and they are Bit Depth and Triggering. The Triggering attribute does have a "Free Run" value which I tried using with the IMAQ Set Attribute VI (with Camera Attribute = Triggering). I had no error but the frame grabber was also not acquiring images, i.e., the IMAQ session was originally in triggered mode and it seems that it was still waiting for an external trigger.
Vadim

Similar Messages

How to turn off Currency Conversion within the execution of Fox code

Hi All:
We have a number of custom key figures defined in a Planning Layout.
We had wanted to define those fields as type CURR with 4 Decimals, however it appeared that 2 Decimals was the maximum we could specify. We therefore wound up using Type FLOATING POINT with 16 Decimals.
In some Fox code that calculates these custom key figures we then use a ROUND statement to produce values such as 3.2735000000000000.
When this Fox code executes in debug mode, I see a generated ABAP program running which includes Include programs RUPFGENTOP and RUPFGEN00. This program executes a Form F_00001, which is essentially the Fox code. Here I can see the ROUND statement producing the desired result. Right after though a Form TCURX_CONVERSION executes, which often reintroduces all 16 decimals, and I might get values, such as 3.2735000000000001 or 3.2734999999999998. These small fractions cause other issues later on in the process.
In our case we are not trying to convert an amount from one currency to another, so we don't understand why it even would try to do a currency conversion.
My question: is there any way to "turn off" this currency conversion routine?
Please advise - any suggestions would be most welcome.
Many thanks in advance,
Robert van der Kam

Hi Robert,
the solution suggested by Anass only works for key figures of type number. For key figures of type amout or quantity it is not allowed to change the number of decimals. Especially for amounts the number on the DB can only be intepreted correctly knowing the currency. Depending on the currency the value 1 on DB may be 100. This is why the FOX does the TCURX_CONVERSION, a better word would be currency shift since currency values have to be scaled depending on the values maintained in table TCURX. Since FOX needs one common number type for calculations the shift is neccessary.
This is the reason why amounts have only 2 decimals on DB, the real number of decimals comes from TCURX; no entry there means 2 decimals, i.e. not scaling is neccessary. This is why changing the number of decimals via domains might corrupt all data.
It seems that you are using release 7.0x, in releases 7.3x internally uses DECFLOAT data type, thus the 'problems' coming from binary arithmetic in ABAP FLOAT will not occur any more.
Regards,
Gregor

I'm using same icloud and same apple ID on two iphones. Now i get calls from same number on both iphones at the same time. How to turn off that?

I'm using same icloud and same apple ID on two iphones. Now i get calls from same number on both iphones at the same time. How to turn off that?

Apple ID's are not device specific, so when you changed it on the iPad 2 it changed it on the iPhone 4 as well, since it's the same account still. What you need to do is create a second Apple ID (so you'll have two accounts, one for iPhone 4 and a seperate one for iPad 2).
To create a new Apple ID on your iPad 2:
1) Go into Settings > Store.
2) If you are already signed in, tap your Apple ID on the screen and you will be given a few options, one of which is to sign out of your account.
3) After you sign out, now click the "Sign in" button.
4) Tap "Create New Apple ID" and follow the instructions on-screen.

How to turn off phone keypad beeps?

I've got a 3GS/3.1. I can't figure out how to turn off the phone keypad beeps. Under settings/sounds I've turned off keyboard clicks, but the phone keypad still beeps. Any suggestions?

Did you ever get an answer to this question about you not being able to silent your keypad (ten key) tones on your Iphone? I am having this same issue, my boyfriend and i compared our settings and set them exactly the same. His keys are silent, my beep with each one I touch. I can't stand this? Did you ever get it resolved?
Thanks
Renea

How to turn off categorization for case management

Hopefully a simple one, how to turn off categorization for case management.
I get this error in CRM 5.0 when choosing Cases.
CASE_MANAGEMENT, CASE_TYPE, Z_01
My categorization in the IC profile is set to ZDEFAULT (copy of default) but only contains
IR     Interaction Record
SO     Service Order
ST     Service Ticket
Does not have the CA case entry that is in DEFAULT.
Z_01 is my case type but I see no place to set the categorization.
I think I am missing something easy but don't see it.

I'm guessing zdefault had same description default and it was picking up the default one in error.

How to turn off "Copy Files on Import"

I'm new to Photoshop Elements 9 and the Organizer. I'm trying to import my pictures into the organizer but I don't want to copy the file from the network drive to my local Macbook hard drive. Unfortunately I can't figure out how to turn off the "Copy Files on Import" checkbox.
From within the Organizer I am selecting:
File -> Get Photos and Videos -> From Files and Folder
This opens a Finder window and I can navigate to the network drive, select the source folder, and select the files I want to import. I just can't seem to figure out how to disable the "Copy Files on Import" option. Is there something in Prefences that I need to change to allow me the option?
Thanks,
Vince

From the PSE9 help :
Add files from specific folders
In the Elements Organizer, from the Display menu, select Folder Location.The folder hierarchy panel opens on the left side of the Media Browser.
In the folder hierarchy panel, browse to the folder containing the files you want to import.
Right-click/Control-click the folder, and choose Import To Organizer.The Getting Photos dialog box will report whether files were imported.
Click OK.
If files were imported, the folder’s icon changes from an Unmanaged Folder icon to a Managed Folder icon .

'save in subfolder' - how to turn off by default ?

'save in subfolder' - how to turn off by default ?
Thank you for any help with this,
TB

It is really annoying when settings/features are added that just assume a specific work process - without an option to turn them off (or complicated work arounds). And even more annoying when I am asked to submit a feature request after adobe randomly changes things.
This was not a random change. The ability to render image sequences into a sub-folder was a feature request that we have received many many times over the years. Many After Effects users, myself included, sometimes forget to manually create a folder for an image sequence with the result of hundreds or thousands of files exploding into the renders folder or your desktop or wherever the render was saved to.
We answered not only this common feature request but extended the functionality to all formats by the following:
Adding the Save in Subfolder control to create a folder for any output module
Adding support for creating and using folder paths in output file name templates (which naturally interacts with the Save in Subfolder control)
Adding a new output file name template that creates a folder, which is used by default for image sequences
All of these additions were vetted by actual After Effects users before we released the After Effects CC (12.2) update.
not sure why defaults have to be changed.
Perhaps I didn't answer your original question directly: there is not a simple option to stop Save in Subfolder from being enabled when you choose an image sequence format. This would be an additional control on top of the rest of this new functionality. It's not something we thought was necessary as part of the original design of these changes, but we could be convinced to add it in the future. So if you (or anyone else) would like to see this added, please submit a feature request.
The reason why you can get the result you want by changing default output file name template is because that is how the logic works in After Effects. Choosing an image sequence format triggers the use of the Comp Folder and Name template. Changing what that template contains will apply your new rules instead.
Regardless of the template, you can always change the output file path on a case-by-case basis by simply unchecking Save in Subfolder or by choosing a different output file name template.

How to turn off double finder in maverick?

Now that maverick has given me two finder top menus my applications don't work the same way. I use to stretch menus all over my two monitor. now everytime i do this the app window stay in one finder. and apps that have many menus like photoshop won't let me keep the menus on other monitor. how to turn off this feature?

You beat me to the answer Barney-15E. I just found it out. after trying all day. must be telepathy.
thanks for answering so quickly.

How to turn off Smartfilter in firefox?

I want to know how to turn off smartfilter in Firefox. Turn It Off!!!

When you go to a site that triggers Smart Filter it prompts you to contact the administrator.
I just got this laptop from a friend. It is mine now and I am the administrator but I still don't know what to do.

NOT SURE HOW TO TURN OFF RESTRICTIONS AS i DO NOT HAVE A PASSCODE

not sure how to turn off restrictions

Are restrictions enabled? If they are and you don't know the restrictions passcode:
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
     If you have forgotten your Restrictions code, then follow the instructions
     below but DO NOT restore any previous backup. If you do then you will
     simply be restoring the old Restrictions code you have forgotten. This
     same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
     1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
         of the cable connected to your computer's USB port.
     2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
         red slider appears, then slide the slider. Wait for the device to turn off.
          If you cannot turn off the device using the slider, press and hold the Sleep/Wake
          and Home buttons at the same time. When the device turns off, release the Sleep/Wake
          and Home buttons.
     3. While pressing and holding the Home button, reconnect the USB cable to the device.
         The device should turn on. Note: If you see the screen pictured below, let the device
         charge for at least ten minutes to ensure that the battery has some charge, and then
         start with step 2 again.
     4. Continue holding the Home button until you see the "Connect to iTunes" screen.
         When this screen appears you can release the Home button.
     5. If necessary, open iTunes. You should see the following "recovery mode" alert:
     6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

How to turn off login password at boot up?

how to turn off login password at boot up?
currently, i just want the computer to boot up without typing in a password

I am having the same issue, however, when I go to system preferences and then Accounts, Login Options is grayed out.
A little background:
Several macs are networked (with out a server) and scheduled to startup at 6:45 for a Retrospect back-up script to start at 7am. Retrospect runs through the computer that won't automatically login at startup (the system pref. Option is grayed out as described above)
I am running 10.4.11 and so are all the other computers.

How to turn off DataGrid header rollover?

Does anybody know how to turn off the background rollover
color in a DataGrid header? I have seen how to set
useRollOver=false to turn it off in the body of the DataGrid but so
far I can't see how to turn this off in the header. Thanks.

I found a way to fix this but it seems like a kludge. In the
table's style:
headerColors: #D4DBE1,#D4DBE1;
useRollOver: false;
rollOverColor: #D4DBE1;
useRollOver:false works for the data rows, not the header.
Then setting rollOverColor will be ignored by the data rows, but
will turn off the rollover for the headers, as long as the color is
the same as the header colors.

TS3697 I've this problem and don't know what to do , i'n trying to follow these steps so i'm asking how to turn off photo syncing and to sync my device

I've this problem and don't know what to do , i'n trying to follow these steps so i'm asking how to turn off photo syncing and to sync my device

As the article you attached says, "Within iTunes, select the device, then select the Photos pane and turn off syncing."
In other words, once you click on the device in iTunes on your computer (with the iPhone attached), you then click "Photos" near the top and uncheck the "sync photos" box.
Then you sync your device by clicking something in the lower right (it probably says "Apply", but it might say "Sync").

How to turn off receiving apple support communities emails

how to turn off receiving apple support communities emails on imac and ipad?

In addition ,you can go to Your Stuff - Profile- Manage Email Notifications (in the upper right hand Actions box) - either check individual threads to remove or click in the top box which will check all the threads and then click on Remove Email Notifications.
Also check the tutorial for managing email subscriptions
You might also make sure that you haven't subscribed to one of the communities by mistake.
Go to the community that you are receiving the emails from and the same box called "Actions" will appear there just like it does next to the individual question. Make sure that you are not reciveing email notifications for that community. Probably the community where you asked your question. Typically that is what causes people to get 100's of email notifications. I think that this is not included in the tutorial so a lot of people miss it.
laverne's mom

How to turn off Nokia 109

How to turn off the mobile phone nokia 109 ?
Moderator's note: The subject was edited so other users can easily search for the same topic.
Solved!
Go to Solution.

Well there is a difference between removing the battery directly and turning the phone off normally.
When you directly remove the battery, the caller will be notified with "not reachable" and when you turn off the phone by pressing turn off key, the caller will be notified with "Switched off".
Removing the battery is same as going to location with no network!
When you turn off the phone,
The phone tells the network that I'm turning off.
and when you pull the battery out without turning the phone off and when the somebody tries to call you, the network searches for the phone for sometime and says "not reachable".
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------

How to turn off/on triggering within same IMAQ session

Similar Messages

Maybe you are looking for