Satellite Pro A200 does not start up

Hi
I have an A200 with XP PRO installed.
After a routine defrag and restart the laptop when booting back up gets to my screensaver page then makes the noise off shutting back down.
No toolbar appears just goes straight tomy log in page and i have to shut it down?
When I try to restart in any of the three safe modes, again I get to the log in stage press enter the screen flickers twice and I get the login page again?
I have taken out the Ram stick and HDD to see if anything is amiss but they both seem fine..
Xmas eve and no laptop. Yeah I know. Get a life.
Can anybody help?

If you cannot even start your notebook in safe mode it is very bad situation.
What you can try is to obtain Microsoft installations CD and try to boot up with it and use REPAIR option.
If this will not help I really don't know what you can do aside from clean OS installation with recovery media.
Do you have some important data on the HDD?

Similar Messages

MacBook Pro 2009 does not start

Hi everybody, my Macbook pro 2009 does not start anymore.
I can hear the startsound, the screan lights, thats it.
I tryd PRRAM Reset, Holding down alt key,
changing RAM, nothing works...any ideas?
Thanks

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best.

Satellite A200 does not start anymore.

Hello, im trying to find a whats going on with my laptop. It's a Satellite A200 on Windows 7 professional.
From a few days ago i cant start the laptop anymore. It doesnt look like a software issue because when i push the power button, the only thing that happens is the power led turns on (blue color) and, 2 seconds later, starts to blink orange. And never passes this stage.
The screen remains as off, and i think, the BIOS does not start as well.
Ive already tried to remove the Ram and the hard drive - Keeps doing the same. Doesnt even bleeps over the missing Ram or drive!!!
Anyone have any ideia about whats going on??!! Please anwser!
Sorry for the english. Portugal here ;)

> Do you kown if this is a comom problem with this laptop model?? Because i have read in a few forums that is a common problem with this laptop
Unfortunately, this is a common problem for many laptop models. My old laptop (non Toshiba one) also had such problem with southbridge malfunction. I just threw it into garbage as replacing mobo is pretty expensive procedure. it's better to buy new one or second-hand

Satellite A200 does not start up - LED flashing error

I have problem with my Satellite A200.
The battery button is flashing 2 times blue and 2 times orange and it does not start.
Can somebody help me???????

Hi
Please check this interesting document: What can I do if my computer will not Power On?
If the problem persists please let us know.

Satellite Pro L100 does not run after BIOS update

Ok the machine is a Toshiba Satellite Pro L100 PSLA4. Problem occurred during a BIOS update from the official Toshiba website. I downloaded the zip file, extracted it and activated the .exe file inside.
The window opened by the .exe was a BIOS flashing program, the .exe also simultaneously wrote a new BIOS file to a temporary folder.
When tried to use the program all I got was an error saying that it couldn't find the new BIOS to input.
I tried again only to get the same error. I then left the laptop for several minutes and when I returned, I found a blank unresponsive laptop.
By unresponsive I mean an obvious lack of BIOS functions i.e. power LED's not changing when plugging in of unplugging from the mains and the fact that I had to pull the battery out to turn the machine off. When the machine is turned on now all it does is check the drives and restarts (no display, no beeps)
What do I do?
The first thing that came to mind was to reset the BIOS.
One problem, I can't find the RTC battery or a jumper switch.

I have at least found out why this happened, the program obtained from Toshiba automatically 'attempts' to upgrade the BIOS upon activation. This means that the program engaged with errors without my authorisation. I don't find this very impressive from a company as large and powerful as Toshiba.
Also it may be possible to fix myself if the BIOS installation instructions made sense, extracting the .zip file does not create three sub folders and pressing the F12 key does not start the laptop.

Adobe Acrobat Pro 10 does not start anymore

This happened to me three times now. One time Adobe Acrobat Pro 10 is working properly for weeks. It crashes once and after that it does not start anymore without providing a message or clue.
What I used to do is remove CS6 completely and reinstall it. But this is tedious. Just uninstalling Acrobat Pro and reinstalling it doesn't do the trick.
My guess is that a setting is stopping Acrobat Pro from starting. Is it possible to reset Acrobat Pro settings to the factory default? I've already remove the folders under
%LOCALAPPDATA% \adobe\acrobat and
%APPDATA% \adobe\acrobat
but this doesn't help.

Ok. This occasion I had a bit of time on my hand and found a solution yuhu!
Make sure you have access to you license key as you have to enter it new after this procedure
1) Navigate to C:\Program Files (x86)\Common Files\Adobe\Adobe PCD\cache
2) Delete or rename the file cache.db
3) Open Acrobat Pro, you will be asked to license the software again under your Adobe-ID again.
4) If asked to connect to your Adobe-ID and re-enter the license key.
Now Acrobat Pro is working (as are all the other CS6 applications.

Satellite Pro A200 - Wifi not responding after loading of Win XP

Hi there, i`m new here and I apologies if this has been covered,i have searched the forum but came up with nothing.
I have a:
Satellite pro a200
Windows XP.
My laptop had xp professional installed and the onboard wifi was working.
I had issues with the laptop overall but the wifi worked. I formatted it last night, installed a new copy of xp home and now the wifi doesnt appear to be recognised. The light is on ,on the switch but i cant seem to get the laptop to recognise its there.
I havent given you much I know but I hope I can get it sorted.
Any questions you may have i will try and answer with as much info as possible.
Thanks, Kirky.

Hello, thanks for the advice.
I have flashed the bios and also installed the latest driver. Now I can see my home network but the notebook now wants a WEP Key to continue. In the last few weeks i have connected 2 xboxs and 2 mobile phones to this network without any issues. Now I want to connect a notebook it is asking for this key and I don`t know what it is, or where to locate it.
Thanks, Kirky.

Satellite L650-12Q does not start up

I have a toshiba L650Q laptop. Its been working fine since 1.5years now..
Just a couple of days back I closed the laptop ie closed the screen ( typically it puts the same in sleep mode).
After about 10 min when I tried to open & start up the laptop simply does not startup :(
I can see the battery & power adapter LED glow, but when I press the start button, it simply does not start..
there is momentary glow of the power on button, i hear the fan trying to start up & then it dies down in abt 2 seconds & laptop simply does not start up..
I tried the below troubleshooting steps but no success
1) I removed the battery & tried starting using the adapter, it dint start up
2) I put the battery out for like 1 hour & then tried again, it dint start up
Please advise the troubleshooting steps or any pointers as what could the problem be & how can i resolve it..
Message was edited by: dhiru23

Try this:
- Remove the battery and disconnect the AC adaptor.
- Press power button 30sec long
- Connect battery and AC adaptor to the notebook
- Try to power up the unit.
If this fails, check the memory modules.
Remove one module and try to boot the notebook using one module. Run the test for each slot and module.

Satellite A series does not start up after BIOS update

After bios update with downloaded utility my notebook does not start up.
Did this case covered by warranty?

Im not quite sure if this would be covered by warranty. You should contact the ASP in your country for details but I presume its not covered.
PS: Did you try this workaround:
- remove battery, disconnect the AC adaptor
- wait ~ 40min
- connect both devices again and try to power up the notebook

Satellite 1800-814 does not start if AC adapter is plugged in

Hello,
I've got a problem with my 3 year old 1800-814.
It all began with sudden Windows crashes. Sometimes it ran smooth, sometimes it just hung up. So I decided to reinstall the notebook. My Problem is when it is plugged into pressing the power on button does not start the laptop. Just the green light is on nothing else happens. Sometimes it starts after a wait of 3 or 5 secs. On battery it starts every time. What can I do? Defect hardware or just dust somewhere?
Thanks,
Jens Grieger

Hi,
If you have a voltage tester test the AC adapter and see if it has the right current voltage, which is written on the adapter. If it does, plug the adapter into the portable and move it around, see if the light turns on and off while you are moving the ac plug(near where it plugs in to the computer, to see if it is a loose ac harness inside the computer). Does the computer randomly turn off if you have the battery removed? Or do you notice that it suddenly switches to battery power and back to AC adapter while the adapter is plugged in? Could be the adapter. Check that first. If that is good, then check the adapter plug(located on the back of the computer, where the adapter plugs in) to see if it is loose. If you find that it is loose, you can take it to an Authorised Service Provider and have them fix it. I hope this helps.

Can't install Win 8 - Satellite Pro C660 does not detect HDD

Hello,
My HDD has died, so i decided to upgrade my Satellite Pro C660-1D9 to an SSD.
I made a bootable USB with Win8, and booted just fine.
The problem is that it does not detect my SSD so i can proceed with the install.
SSD shows up in BIOS, but not in Windows install.
It says there's a driver missing.
I downloaded AHCI drivers (XP, only ones available) and even then, after selecting the only driver that appears, it says no new devices found.
I tried changing SATA mode from AHCI to Compatibility mode and it's the same..
What can i do?
Thanks for the help.
Best regards,
Bruno Moreira

Older Windows XP required an AHCI driver from Intel but I think this isnt a missing SATA driver issue because as far as I know Windows 8 as well as Win 8.1 already contains the drivers in order to recognize the HDD or SSD drive.
Furthermore the OS installation should be possible even if the driver would not be added... for this procedure you have to use the "compatibility mode".
As you said, the compatibility mode did not work too, so I think there is another problem.
However, Toshiba driver page provides also an Intel RST (Intel Rapid Storage Technology) driver (Windows 8 - Upgrade) which you could try to add while OS installation.
But Im wondering if you would be able to install this Win 8 on common SATA HDD.
Did you try to format the SSD drive using another computer and then to install Win 8?
Try it out.

Satellite L100-113 does not start after memory upgrade

Hello.
Our integrator bring to our company memory modules KVR800D2S5, but notebook doesn't start :(
I read manual - this notebook supports 533 PC4200 memory modules.
But SO-DIMM 533MHz will be delivered only in a month...
What memory modules we can install to Toshiba L100-113?
Thank you.

Hi
I think the notebook does not power up due to a faulty or not fully compatible memory module.
Please check this 3rd party memory website:
[Memory for Toshiba Satellite L100-113|http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=22360&ft=m&st=3]
As you can see the Satellite L100-113 memory can be upgraded up to 2GB (2x 1GB) and you have to use the DDR2 533MHz (PC2-4200) 200-PIN SODIMM
Regards

Satellite M-series does not start correctly

Hello,
I have the following problem: suddenly (don't know why, nothing changed) Satellite notebook shows black white screen with about the following:
(sorry, translated from german):
windows did not start correctly... due to software or hardware change.. pls choose last functional configuration if mistake was due to power shut down...
But this does not work, also all other options (start windows as normal, start in safe mode...did not work.
No idea what happenend !
Problem:
Actually moved to another country and forgot or lost recovery CD ! already contacted Toshiba for new one but maybe anyway somebody can help?

Hmm. Stupid situation. If possible try to obtain Microsoft WXP installations CD to see if you can start installations procedure properly and if you can use repair option too.
It is not easy to say what is wrong there but I just hope there is no problem with HDD. Try to use original recovery disc.

Satellite A660-11M: Does not start with 8GB of RAM, but works with 6GB

Satellite A660-11M:
I upgraded my RAM from 4GB (2x2GB) to 8GB (2x4GB). When I start the computer I can see in the BIOS it reads the 8GB of RAM. However, when it boots up, it does not go past the blank DOS screen (just before starting Windows).
If I remove one of the 4GB & replace with a 2GB (so I have 6GB in total) it starts ok.
Does anyone know how can I get it to work with 8GB of RAM?

Hey,
To be honest I never heard about SanMax RAM modules...
In my opinion the problems is related to your RAM modules Not compatible to your notebook or defective.
Can you test it with high quality modules from Kingston or pretested modules from an authorized service provider?

Satellite pro A200 won't start up / boot

Hi,
my laptop is refusing to startup beyond the windows loading page, I disabled automatic restart and the message on the blue screen says:
STOP: c0000221 {Bad Image Checksum} The image oleaut32.dll is possibly corrupt. The header checksum does not match the computed checksum.
Does anyone know what I need to do?
Thanks in advance for any help.
Donal

Satellite Pro A200-16Y
Bug Check 0xC0000221: STATUS_IMAGE_CHECKSUM_MISMATCH
This indicates that a driver or a system DLL has been corrupted.
This bug check will display a descriptive text message. The name of the damaged file is displayed as part of the message.
Please give us the name of the file from the blue screen. If a path is available, be sure to include that.
If you have located an installation CD, learn to access the Recovery Console.
Description of the Windows XP Recovery Console for advanced users
-Jerry

Satellite Pro A200 does not start up

Similar Messages

Maybe you are looking for