How to uninstall "Command Line Tools" in Xcode 4.3?

Just installed Command Line Tools using the perference in Xcode 4.3. After removing Xcode 4.3, I found the Command Line Tools are not removed.
Is there any way to uninstall?
Thanks!

Check the 'About Xcode' readme:
Uninstalling Xcode Developer Tools
To uninstall Xcode developer tools on the boot volume along with the <Xcode> directory, from a Terminal window type:
$ sudo <Xcode>/Library/uninstall-devtools --mode=all
To remove the underlying developer content on the boot volume, but leave the <Xcode> directory and supporting files untouched, from a Terminal window type:
$ sudo <Xcode>/Library/uninstall-devtools --mode=systemsupport
To just remove the UNIX development support on the boot volume, but leave the <Xcode> directory and supporting files untouched, from a Terminal window type:
$ sudo <Xcode>/Library/uninstall-devtools --mode=unixdev
Finally, to just uninstall the <Xcode> directory you can simply drag it to the trash, or from a Terminal window type:
$ sudo <Xcode>/Library/uninstall-devtools --mode=xcodedir
NOTE: The uninstaller that ships with previous versions of the Xcode developer tools will not clean everything off of your system properly. You should use the one installed with these Xcode developer tools.
-=-
If you find a black hole with the above, you could always reinstall Xcode, with those tools deselected and then delete according to the above, but all bets are off at that point, sorry
Good luck in any case.

Similar Messages

Command line tools for xcode??

I am used to compiling code much like the java sdk works from terminal where I say javac the filename and then i get a .class file that i can run by doing the command java and then the .class file after. I am now wanting to learn c++ and I dont feel like installing xcode all i want is a compiler that can run from terminal. i found command line tools for xcode on the apple developers site and i was wondering do i need xcode for this to run and after that what the commands are and how i compile/run the code. But my biggest question is still wether or not i need xcode to let command line tools work. ive read in a couple places i dont need it but in other ive read you do can i get help?!

You don't need Xcode to compile your apps with; just the compiler/linker.
Xcode is Apple's IDE. One could write the same code in TextEdit but that wouldn't be easy nor fun.
(Missed it by THAT much!)

What are the commands for compiling c++ using the command line tools for xcode?

Hi, I am taking a class in school for c++ and i would like ot be able to practice at home i found the command line tools for xcode and went ahead and installed it on my computer. now i need to know the commands and procedure to be able to compile and run c++.

c++ testfile.cc

How to uninstall Command Line Developer Tools

Hello, After upgrade to OSX Mavericks by mistake I downloaded Command Line Developer Tools. I'm not a coder, just a graphic designer and I'm not gonna need it. It's about 300 MB size and I don't want it. The worst part is that its the second time Apple Update shows a new update for this. If I try to move Library/Developer/CommandLineTools folder to trash I'm asked to provide my admin password, so I don't do it because I'm affraid to harm my OS. I've been searching on the web for an answer close to my case but only found uninstall tips related to Xcode that don't apply to me. Can you please help me to get rid of this Command Line Tools? Thanks a lot in advance!

latiffrommexico wrote:
If I try to move Library/Developer/CommandLineTools folder to trash I'm asked to provide my admin password, so I don't do it because I'm affraid to harm my OS.
Do it. It will not harm OS X, and you will be removing the Command Line Developer tools. Nothing will happen to your Mac, but you should make a backup of your files before modifying system files.

Command line tools for xcode mac os x 10.6.8

Hi,
Will the latest command line tool work for mac os x 10.6.8 also? If yes, I will go ahead and download them.
If no, please help find a download location for command line tools for mac os x 10.6.8.
Also, please let me know if that will support the development of latest ios apps.

developing for "the latest iOS Apps" is supported by the latest X-code tools, which does NOT run under 10.6.8.
Version 3.2.6 will run under 10.6.6 and later.
Version 5.0.1 requires 10.8.4 or later.
Version 6.1.1 (currently the latest) requires 10.9.4 or later.

How to run command line tool in my program???

Hi,all,I've got some tools that are usually,or take JDK for example,if we are not using an IDE,we need to open the command prompt,and then use the javac command to compile the source files and the "java "command to run the program,and both of them accept some command line params.The problem is that how could i integrate the tools in my own program,like JBuilder or some other IDE,you configure the params and compile and run in the IDE which don't need to open a command line prompt.Hope i have got my question clear:)
Best regards..

jesperdj ,thanks:)
actually,i am using eclipse to run my ant tasks programmatically,but I got trouble with the AntRunner class.it seems that i should config a proper classloader for it,but i just don't know how.please lend a hand:)thanks
robin

How to uninstall the command line tools?

I installed the command line tools in Xcode 4.5 from the preferences : downloads : command line tools.
If i want to uninstall this component, what should I do？
PS:
I saw an answer in the Apple Support Communities about how to uninstall the Xcode 4.3 and later versions.
This is the original: " If You want to uninstall completely XCode go to launchpad and push Xcode icon for two
seconds, so click on the upper left checkbox.".
I don't know what means "push Xcode icon for two seconds, so click on the upper left checkbox".

There is no easy way to uninstall the command line tools. The following article has a script to uninstall them:
You Don’t Need The Xcode “Command Line Tools”
Read the comments in the article. I have not tested the script, but this is the first result when searching Google for "xcode 4.5 uninstall command line tools".

Command Line Tools installs the latest version of clang (and others) in /Library/Developer/CommandLineTools/... but not in /usr/bin/

I've upgraded Xcode to the latest 5.1 Installed Command Line Tools via xcode-select --install Homebrew tells me "A newer Command Line Tools release is available"
brew --config:
Xcode: 5.1 CLT: 5.1.0.0.1.1393561416 LLVM-GCC: build 2336 Clang: 3.1 build 318
Checking my clang executable:
$ /usr/bin/clang --version Apple clang version 3.1 (tags/Apple/clang-318.0.58) (based on LLVM 3.1svn)
$ /Library/Developer/CommandLineTools/usr/bin/clang --version Apple LLVM version 5.1 (clang-503.0.38) (based on LLVM 3.4svn)
So it appears Command Line Tools didn't install clang (and perhaps other executables) into /usr/bin? I checked my other laptop (w/ Mavericks), and /usr/bin/clang is version 5.1.
So I'm guessing this is the problem? I've tried to reinstall Command Line Tools as sudo, but now it won't let me install again (says software isn't currently available).
Can anyone help me with this? I've spent hours on it now, but can't find a solution.
Thanks

BTW, I installed Xcode 5.1 from the Store, but have never run xcode-select --install. Here is the verbose output from a clang.
xew ~/$:clang -v -o hello main.c
Apple LLVM version 5.1 (clang-503.0.38) (based on LLVM 3.4svn)
Target: x86_64-apple-darwin13.1.0
Thread model: posix
"/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain /usr/bin/clang" -cc1 -triple x86_64-apple-macosx10.9.0 -emit-obj -mrelax-all -disable-free -disable-llvm-verifier -main-file-name main.c -mrelocation-model pic -pic-level 2 -mdisable-fp-elim -masm-verbose -munwind-tables -target-cpu core2 -target-linker-version 236.3 -v -resource-dir /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/ usr/bin/../lib/clang/5.1 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/ SDKs/MacOSX10.9.sdk -fdebug-compilation-dir /Users/xew -ferror-limit 19 -fmessage-length 100 -stack-protector 1 -mstackrealign -fblocks -fobjc-runtime=macosx-10.9.0 -fencode-extended-block-signature -fdiagnostics-show-option -fcolor-diagnostics -vectorize-slp -o /var/folders/zf/d5vqmmtn5mq7h6766jtlkrvr0000gn/T/main-353995.o -x c main.c
clang -cc1 version 5.1 based upon LLVM 3.4svn default target x86_64-apple-darwin13.1.0
ignoring nonexistent directory "/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer /SDKs/MacOSX10.9.sdk/usr/local/include"
ignoring nonexistent directory "/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer /SDKs/MacOSX10.9.sdk/Library/Frameworks"
#include "..." search starts here:
#include <...> search starts here:
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/ usr/bin/../lib/clang/5.1/include
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/ usr/include
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/ SDKs/MacOSX10.9.sdk/usr/include
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/ SDKs/MacOSX10.9.sdk/System/Library/Frameworks (framework directory)
End of search list.
"/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain /usr/bin/ld" -demangle -dynamic -arch x86_64 -macosx_version_min 10.9.0 -syslibroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/ SDKs/MacOSX10.9.sdk -o hello /var/folders/zf/d5vqmmtn5mq7h6766jtlkrvr0000gn/T/main-353995.o -lSystem /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/ usr/bin/../lib/clang/5.1/lib/darwin/libclang_rt.osx.a
xew ~/$:

Issue while creating BPEL artifacts using BPEL command line tool

All
I am trying to create BPEL artificats for SQL server stored procedure for SQO Server 2005 using BPEL Command line tool.
My demo.properties is
ProductName=Microsoft SQL Server
DriverClassName=com.microsoft.sqlserver.jdbc.SQLServerDriver
ConnectionString=jdbc:sqlserver://10.10.20.2:1433;databaseName=dAP
Username:apcdb
Password:password1
SchemaName:dev
ProcedureName:spiSOATesting
ServiceName:SQLServerSPService
DatabaseConnection:MSSQLServer
Destination:c:/temp/sqlprocedure
and I have create a batch file called as generate.bat and it contains following information
java -cp D:\jdevstudio10134\integration\lib\DBAdapter.jar;D:\jdevstudio10134\integration\lib\bpm-infra.jar;D:\jdevstudio10134\integration\lib\orabpel.jar;D:\jdevstudio10134\lib\xmlparserv2.jar;D:\jdevstudio10134\lib\xschema.jar;D:\jdevstudio10134\toplink\jlib\toplink.jar;D:\jdevstudio10134\integration\lib\connector15.jar;D:\temp\sqlprocedure\JDBC\sqljdbc.jar oracle.tip.adapter.db.sp.artifacts.GenerateArtifacts %1
and when I try to run the command at BPEL PM Developer Prompt, I am getting Procedure not found, Can one please tell, what is the cause of this error. and how does this command line tool exactly work.
Following is the output from command prompt.
D:\product\10.1.3.1\OracleAS_1\bpel\samples>D:\temp\sqlprocedure\generate.bat D:\temp\sqlprocedure\demo.properties
D:\product\10.1.3.1\OracleAS_1\bpel\samples>java -cp D:\jdevstudio10134\integration\lib\DBAdapter.jar;D:\jdevstudio10134\integration\lib\bpm-infra.jar
;D:\jdevstudio10134\integration\lib\orabpel.jar;D:\jdevstudio10134\lib\xmlparserv2.jar;D:\jdevstudio10134\lib\xschema.jar;D:\jdevstudio10134\toplink\j
lib\toplink.jar;D:\jdevstudio10134\integration\lib\connector15.jar;D:\temp\sqlprocedure\JDBC\sqljdbc.jar oracle.tip.adapter.db.sp.artifacts.GenerateArtifacts D:\temp\sqlprocedure\demo.properties
Procedure not found: dAP.spiSOATesting
Thank you

HI
Pricing will be carried basing on the pricing
procedure.
Case1: Prices will be carried out automatically if
necessary condition records are maintained for the
condition type.
For this you can go to Sales Order-> Item Conditions
In the screen you can click on command button Analysis,
which gives you the list of condition types associated
to the pricing procedure. By clicking on the condition
type you can know the action that has taken place.
Case2: Manually forcing prices for Items.
To do this, you have to populate ORDER_CONDITIONS_IN &
ORDER_CONDITIONS_INX. Also note to identify the item
numbers, you manually pass the item number for each item
in the sales order, use the same item number for
populating conditions.
Parameters required:
ORDER_CONDITIONS_IN:
ITM_NUMBER, COND_TYPE, COND_VALUE, CURRENCY
ORDER_CONDITIONS_INX:
ITM_NUMBER, COND_TYPE, UPDATEFLAG, COND_VALUE,CURRENCY.
Hope the above info helps you. Do revert back if you
need more info.
Kind Regards
Eswar

Oracle Http server 11g, change ports with command-line tool

I have installed the WLS11g webtier's Oracle Http server 11g. I installed the OH 11g only.
The OH is runing fine with ports: non-ssl 7779 and ssl 4444
I want to change the ssl port to 443 such that we can have the url without showing the port as https://hostname.domain/
I have looked up the documnet http://download.oracle.com/docs/cd/E15523_01/core.1111/e10105/ports.htm#CIHJIFHB for "managing port".
it states "You can change the port numbers for some Oracle Fusion Middleware components, using Fusion Middleware Control, Oracle WebLogic Server Administration Console, or *the command line*."
Because I only installed the OH, I have no the Fusion Middleware control , admin console available for making the port change. And I cannot find out how to the command line tool to make the change.
I followed the steps in section 5.3.2.1 Enabling Oracle HTTP Server to Run as Root for Ports Set to Less Than 1024 (UNIX Only) http://download.oracle.com/docs/cd/E15523_01/core.1111/e10105/ports.htm#CIHJEEJH
And I did edit ssl.conf for port change to 443 ---- this is not documented in the document. I think because Oracle wants you to use the console to make the change.
OH is not working after I made the change.
Does anyone know how to use the commend line tool for making the port changes for OH11g?
Thanks

Hi,
if u want to achieve it using JMX then u can try :
http://middlewaremagic.com/weblogic/?p=613
Using Command Line Option WLST you can do it in ONLINE Mode...like:
Step1). Please run the ". ./setWLSEnv.sh" script to set the CLASSPATH & PATH in the shell prompt.
NOTE: Run the “setWLSEnv.sh” by adding two DOTs separated by a single space …..before the actual script like following : (use ‘cd’ command to move inside the <BEA_HOME>/wlserver_10.3/server/bin) then run the following command….
*. ./setWLSEnv.sh*
Note: the first DOT represents that set the Environment in the current Shell, AND the second ./ represents execute the script from the current directory.
Step2). Now in the same Shell Prompt please run the WLST Utility like following:

java weblogic.WLST
wls:/offline> connect()
Please enter your username [weblogic] : weblogic
Please enter your password [weblogic] : weblogic
Please enter your server URL [t3://localhost:7001] : t3://localhost:7001
Connecting to t3://localhost:7001 with userid weblogic ...
edit()
startEdit()
cd ('Servers/AdminServer')
cmo.setListenPort(9999)
save()
activate()

Now you NEED NOT to restart your Server to reflact these Changes....
The Above JMX Code is also able to do it in Runtime only on the Fly.
Thanks
Jay SenSharma
http://middlewaremagic.com/weblogic (Middleware Magic Is Here)

Hello I am on a macbook pro (retina IOS 9) i have installed xcodes and command line tools but codeblocks does not compile, terminal gives this message /Users/MacPc/Desktop/Untitled1: Permission denied      any one has a solution

Hello I am on a macbook pro (retina IOS 9) i have installed xcodes and command line tools but codeblocks does not compile, terminal gives this message /Users/MacPc/Desktop/Untitled1: Permission denied      any one has a solution?? please...

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
          Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
           ▹ Restart
from the menu bar.

How are Windows Server Backup and Command Line Tools used in vCSHB installation?

How are Windows Server Backup and Command Line Tools used during the installation of vCSHB? Is it required in all types of deployments (PtoV, VtoV, PtoP)? Is it used to create the files that are put in the file share for the second node to use during vCSHB installation or is it only used during a vCSHB clone operation of a Physical to Physical deployment? Are these tools not used in some deployments?

You need Windows Server Backup installed on source and destination, and during the installation of vCSHB the installer will invoke the wbadmin (Windows Server Backup Utility) and will backup configuration and application data (application data is optimal but can decrease the sync time after installation of secondary node). On the secondary node you will need only run the vCSHB installer and everything will be restored.
Check this blog entry for some more info about some problems in P2P deployment: http://www.vcoportal.de/2013/12/vmware-vcenter-server-heartbeat-restore-on-a-second-node-a-journey/

How can I create a NetBoot image using command line tools?

Is it possible to create a NetBoot image entirely using command line tools?
(That is, without using the SystemImageUtility)
If so, are there reasonable instructions posted somewhere?
I don't believe I can use SystemImageUtility with my current setup,
but I would be happy to hear how I could:
I have a set of Xserve clusternodes but without optical drives or video cards.
One node acts as the head, running DHCP, DNS, OpenDirectory, Xgrid.
They are wired to a gigabit switch.
I have a PowerBook connected on the subnet which has ServerAdmin Tools installed.
I don't think when I run SystemImageUtility on my PowerBook that I can successfully image one of the clusternodes disks over the network.
I have tried to start one node in target(Firewire) mode, connect it via Firewire
to the head node, and run hdiutil from the head node to make a complete disk image of the clusternode's drive.
But a NetBoot image requires the whole nbi file, right?
Could I then use copy this disk image to my PowerBook and use SystemImageUtility on my PowerBook to create a NetBoot image from it?
I really have tried to read the PDFs, but I found the section on System Imaging in the Command Line Reference rather unhelpful.
Thanks for anyones help.
dmaus
Mac OS X (10.4.4)

To create a NetBoot image, you could just put the cluster node in target mode and attach it to your PowerBook. Then use SIU to create the NetBoot image.
If you're trying to create a backup image of the disk, use hdiutil, or put in in target mode and create the image with Disk Utility.

How to configure Team explorer 2010 command-line tool in Mac x os. configure shell or system path to include the folder to which (TF client) unzipped archive available.

How to configure Team explorer 2010 command-line tool in Mac x os.
Hot to configure shell or system path to include the folder to which (TF client) unzipped archive available. I am new to Mac X OS. Please help.

Dmitry,
Thanks for the great writeup!
I think I've got my universal instant client libraries built correctly.
I too am using MacBook Pro but I'm getting stuck at building the 32 bit oci8.so
First problem is my pecl download (ver 1.4.1) did not contain a "configure" file so ./configure failed.
I used configure from /sw/....... to try to continue.
Second problem. Using existing configure from /sw/.... I used an appropriate variation of your example command
(./configure --with-oci8=instantclient,/usr/local/oracle/instantclient_10_2 && make).
Things look like everything ran OK but The output does NOT include an oci8.so file
So I guess my question is: Which "configure" should I be using? And if it is not the one on the system under /sw/...
where would I get it since it doesn't come in the pecl download?

Use third party framework in Command Line Tool

Hi. I'm writing a small application for a friend of mine, and basically what it does is lets you put in some information, and then creates and stores that information in an Excel file. However, all of my research suggests that C++ doesn't work nicely with Excel files, so I found a 3rd party framework called LibXL which provides C++ with the ability to create and edit Excel files. My only problem is getting my Command Line Tool to use this framework. I'm not even sure if it is possible, but if someone could help me out, I would really appreciate it!
P.S: I'm using XCode 4.2 to write this application, and I'm using Command Line Tool because the application has to be useable on Windows.

That last one is an excellent punch line!
>I found a 3rd party framework called LibXL which provides C++ with the ability to create and edit Excel files.
That should be coming with a manual. Some frameworks can be included in their entirety into the program you are writing, where for others you can only reference to it and you have to distribute the framework file(s) along with your own application. This doesn't sound like one, but an external framework may only be meant for GUI functions, in which case you cannot write a Terminal-only program.
But here comes the kicker:
>P.S: I'm using XCode 4.2 to write this application, and I'm using Command Line Tool because the application has to be useable on Windows.
It's possible for you to *write* the program but not to compile it. (Actually, you *can* compile it but then you have a Mac Terminal program, not a Windows one.) Even if you know what you are doing and are happy with sending over the source code, together with instructions on how to compile it under Windows, this implies you would only and *exclusively* use functions that are available in compilers for Windows. That rules out your External framework idea -- unless there is a Windows version available as well (do check for that; if this is an Open Source project, there very well may be.) But you are still programming "blind", and if you get it to work on your Mac (and nevermind the problem with the framework being external, because you won't need to send it over anyway) but your friend canNOT make it work under Windows, you won't know if it's because the Windows version of the compiler doesn't accept the external library, or it's the wrong version, or you accidentally used a Mac-only feature anyway, or the friend does not know how to compile ... et cetera, et cetera.
Best advise is to install VirtualBox (or something similar) on your system, test all you want with XCode but then, after you got it to work, carry over the project into Windows and start a-new.

How to uninstall "Command Line Tools" in Xcode 4.3?

Similar Messages

Maybe you are looking for