How to uninstall Elements 8?

I installed Elements 10, but when I tried to uninstall Elements 8 I get, "Error 1316. A network error occurred while attempting to read from the file C:\Windows\Installer\AdobePhotoshopElements8.0.msi"  I searched the web and found one set of instuctions to manually remove the folder and registry entries.  The folders were easy, but the registry instructions appear to be for previous versions of Windows.  Are there any instructsion for Windows 7?

Actually, I spoke too soon.  When I checked I an only find about half of
the items listed.  I cannot find HKCR\Software|Adobe\Elements Organizer nor
Photoshop elements.  In HKCR\Software\Adobe\ folder there is only Acrobat.
In HKLM\Software there is no Adobe subfolder.
Also, it isn't clear to me what it means to remove the registry entry.  Do
I delete the subfolder or something else.  For exampe
HKLM\Software\Classes\Installer\UpgradeCodes\5C1E2F4B17C6F69...  is listed
as a subfolder and in the right panel it has 2 items with their names
(Default and C73EFD71E...) the type (REG_SZ for both) and Data ("value not
set" on the first and blank on the second).  So do I delete the subfolder
or an item in the subfolder.
Sorry for the questions, but I'm finding this difficult.
Ed
On Thu, Mar 22, 2012 at 9:36 PM, Edward Pattishall

Similar Messages

  • How to uninstall Elements 12

    Just purchased and installed PhotoShop Elements 13 but cannot find any way of uninstalling Photoshop  Elements 12.
    Does not appear in all programs in control panel or Revo Uninstall Pro.

    Hi,
    Ideally there should be an entry of PSE 12 in Add/Remove Programs in Control Panel.
    If you are not able to locate PSE 12 Entry there you can initiate PSE 12 Setup.exe (from PSE12 Installer Setup that you used for installation) ,it will launch in uninstall mode.
    Thanks,
    Shikha

  • How to uninstall Elements 6 after a failed installation?

    My wife bought Elements 6 and I attempted to install it on her ibook, but entered the serial number incorrectly. Clearly some parts of the installation downloaded but these prevent a re-installation and need to be removed by an uninstaller. There is no uninstaller on the installation CD. I have installed it on my mac to make sure it works and it does, but where can I get the uninstaller?

    Yes, there is an uninstaller, but it's stupidly hard to find. You start the install, only choose Remove Components rather than Install Components when you get to that screen. Are you sure your ibook meets the requirements for PSE 6? (some do not)

  • I WANT TO UNINSTALL ELEMENTS 10 ON WINDOWS 8 BUT IT IS NOT SHOWN UNDER PROGRAMMES AND FEATURES SO HOW DO i DO IT PLEASE?

    I
    WANT TO UNINSTALL ELEMENTS 10 ON WINDOWS 8 BUT IT IS NOT SHOWN UNDER PROGRAMMES AND FEATURES SO HOW DO i DO IT PLEASE?i

    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements
    But please not all-caps.

  • I want to uninstall Elements 10 but it is not shown under Programmes and features in my Windows 8. How do I do it please?

    I want to uninstall Elements 10 but it is not shown under Programmes and features in my Windows 8. How do I do it please?

    See if this helps:
    https://helpx.adobe.com/photoshop-elements/kb/manually-remove-photoshop-elements-10.html

  • How to uninstall trial elements 6

    I don't know how to uninstall the trial version of elements 6. I can't load the new disc i bought today until the trial is removed.....I get errors. 2hrs with tech support was no help at all. Any thoughts.

    I’m not sure if Photoshop Elements does it, but some software developers have their software periodically “phone home” to them.  The software reports back to the developer’s web site and says, “Hi, I’m serial number 12345v6 and I’m running on a computer with the serial number of C02FCCD7DF92”.  I don’t know the reporting interval, but let's say this phone home process happens once a week.  This phone home process can only happen when you have launched the software on a computer and that computer is connected to the Internet.
    By recording and comparing the serial numbers, this allows the software developer to know if you have installed this version of the software on more than one computer - which is a real No-No.
    I don’t know that Photoshop Elements is using this phone home option, but how else could Adobe know that you are running the same serial number of Elements on two different computers?  It’s not as though you’re phoning Adobe.
    I don’t believe that there is a “deactivate” option that you need to select.  What if the old computer had died yesterday, and you no longer could launch Elements to select a deactivate option?
    If I’m right, you could “deactivate” the software, if you just stop using Elements on the old computer.  That’s a bit dangerous because if you were to accidentally launch this software on the old computer - it will phone home.
    To insure that you are safe, I’d uninstall the version by putting the version of Elements on the old computer in the trash, and emptying the trash.  You then would only have the software installed on one computer.
    Bob Leahy
    Chief Executive Loafer
    [email protected]

  • I have Elements 12 on my pc.  I installed elements 13 but it will not boot up. Both products are registered with Adobe.When I sign in to 13 and then accept the software agreement it does not load.  Do I need to uninstall Elements 12?

    Pertaining to my question above.....I have uninstalled Elements 13 and then re-installed but I have the same problem as stated above.  Any ideas on how to solve my problem?  Elements 12 boots up just fine.

    cactisken
    You should not have to uninstall Premiere Elements 12/12.1 in order to install and run Premiere Elements 13 on the same computer unless your computer is overloaded and the computer resources are compromised. Just use one program at a time.
    Can you still use 12/12.1 on this same computer that will not let you use 13?
    What specific Window operating system are you using?
    Let us go through the usual drill...
    1. Does the problem exist with and without the antivirus and firewall(s) disabled?
    2. Are you using a pen and tablet device instead of a mouse?
    3. Did you install the program with antivirus and firewall(s) disabled?
    4. Disable the SLCache Folder found in Windows 7, 8, or 8.1 64 bit
    Local Disk C
    Program Files (x86)
    Common Files
    Adobe
    and in the Adobe Folder should be the SL Cache Folder that you delete or disable by renaming the Folder
    from SLCache to SLCacheOLD.
    5. Are you running the program as Administrator and is the latest version of QuickTime installed on the same
    computer as Premiere Elements 13?
    Let us start here and then decide what next.
    Thank you.
    ATR

  • How to uninstall Adobe Acrobat Reader 8 completely?

    How to uninstall Adobe Acrobat Reader 8 and Adobe Download Manager completely?
    I have Adobe Photoshop Elements 3 and I don't want to uninstall that.

    Hi
    Most Mac applications come in self-contained packages (ctrl-click, or right-click, & you will see Show Package Contents), they can just be dragged to the trash.
    Some applications have their own uninstaller which must be run.
    With Adobe Reader 8, I believe the icon in Applications is a folder so just drag it to the trash & empty the trash. I believe Download Manager (Applications/Utilities) should be the same. Someone may know different.
    There is also AppZapper or AppDelete. These work by you dragging & dropping the application you wish to delete onto its icon, AppZapper/AppDelete then pulls all parts of that application together then moves it to the trash.
    Steve

  • How to Reinstall Elements 12? - after WIndows8 troubleshooting removed Elements 12

    Windows 8.1 automatically installed a patch during shutdown yesterday.   Afterwards, my system wouldn't boot up.   I tried to boot up several times but the system froze very early in the boot sequence.   Eventually I entered a troubleshooting mode where Windows offered to uninstall my apps and then attempt to boot up.  I did this and my Elements 12 was de-installed.
    I've been using Elements for many years. I have over 60,000 photos in my catalog and I have 20 or so albums and have spent a lot of time tagging my photos with keywords/stars.  Needless to say, I am quiet interested in recovering my catalogs.
    My photos are kept on a NAS drive.
    I purchased Elements 12 over the net and installed it on my Windows 8.1 machine.    The machine has 16 GB of RAM.  Its a 64-bit OS, x64-based processor (Intel).
    I manually ran \users\xyz\Desktop\Adobe Phtoshop ELements 12\PSE 12\setup.exe
    Adobe Photoshop Elements 12 - Setup  (Pop-up):
    Setup.exe was not able to locate some components required for successful installation of the product.  Please retry after making sure the complete set of files are available.
    When I re-ran it I received a pop stating:
    "Adobe Installer"
    Installer failed to initialzie.  This coulbe be due to a missing file.  Please download Adobe Support Advisor to detect the problem.
    How should I proceed?

    SisyphusWV wrote:
    I accidently clicked on UNINSTALL ELEMENTS 12.  How do I get it back?
    by reinstalling it on that same machine.  Have your serial number handy and you should be done with it.  It is pretty obvious the more you look into it.
    Good luck.

  • How to uninstall adobe dng converter 8.3??

    hello,
    i installed adobe dng converter on my windows 7 system. i am very thankfull for any advice how to uninstall it.
    the program isn't listed like other programs in the control panel - programs area, so there's no option to uninstall it the usual way.
    greetings sebastian

    Why do you think it is necessary to get rid of them? They are automatically installed with Lightroom updates and Camera Raw updates anyway. There really isn't any need to get rid of them. You might someday be in a situation where you could need one of those profiles. If you are using Lightroom or Photoshop or Photoshop Elements you probably already had most of those profiles installed. The installation of the DNG converter would only have added a few new profiles that were added in the latest version.

  • How to uninstall Inquisitor and use the updated AcidSearch (in Leopard)

    Title says it all I think - I loved AcidSearch - enough that I didn't use Safari 3 (beta) in Tiger because it killed AcidSearch and when I migrated to Leopard I missed it dearly and have been getting by unhappily with Inquisitor. Now there's a new AcidSearch and it's installed but my search tab is still controlled by Inquisitor - which I can't remove.
    The two ways to remove it that I've found while googling are running the install app again and clicking 'uninstall' - however that isn't an option - it just installs over the top over and over - or by removing it from the Input Managers folder in Library - but that's seemingly a Tiger-only folder now and there's nothing Inquisitor-related in it...
    I guess the other question I have is actually which is better - I only just now realized I can add search engines to Inquisitor - so that might make it very functionally similar to AcidSearch. I don't have very fast broadband, so I feel the predictive element of Inquisitor is useless.
    Any thoughts on which is better and/or how to uninstall Inquisitor (so I can choose!) would be greatly appreciated!

    Hi Alex,
    I just installed it to see where it places files, and the only place the latest version seems to install anything is in Hard drive -> Library -> Input Managers.
    It also (annoyingly) renamed my users Input Managers folder to what you have, i.e. Input Managers-Tiger (I have Cocoa Gestures in there, which was working just fine Mr InquisitorX developer...)
    After deleting the Inquisitor bundle from the top level Input Managers folder and restarting Safari it appears to have gone.
    What version were you using before? Have you tried downloading the same version from versiontracker.com and seeing if the uninstall in that version works?

  • How to uninstall adobe revel

    I have a macbook pro and premiere elements 12. I made the mistake of accepting installing revel. I don't need it but I can uninstall the thing. There is no app to send to trash. I suppose the only other recourse I have is uninstalling elements 12 and reinstalling it.
    Anyone has any suggestion before i do that on how to individually uninstall revel?
    Thank you.

    Please take a look at this Elements help information.  If that doesn't help, perhaps you could say specifically what problems you are seeing.
    http://helpx.adobe.com/elements-organizer/kb/undo-association-elements-catalog-revel.html
    -Peter

  • Uninstall elements 10 problem

    i want to uninstall elements 10 i had trial version then i entered activation key to register product.
    i have no guided photooption or share optionsthey are all blank so i want to uninstall elements 10 so i can reinstall fresh version.
    When i go into control panel / remove program PSE10 is not there ?
    I have put installation discs in and it brings me the uninstall wizard but i keep getting error message "error 2343 specified path is empty"
    How do i uninstall this ?
    Perry

    See this Adobe document describing how to manually uninstall PSE (it's for PSE9, should also work for PSE10):
    http://helpx.adobe.com/photoshop-elements/kb/manually-remove-photoshop-elements-9.html
    Ken

  • How to reinstall Elements 12 [was:?]

    I accidently clicked on UNINSTALL ELEMENTS 12.  How do I get it back?

    SisyphusWV wrote:
    I accidently clicked on UNINSTALL ELEMENTS 12.  How do I get it back?
    by reinstalling it on that same machine.  Have your serial number handy and you should be done with it.  It is pretty obvious the more you look into it.
    Good luck.

  • How to uninstall 10, 11 & 12?!!!

    Dell T7500 PC Windows 7 Ultimate 64 bit. Have Photoshop Elements 13. How to uninstall 10, 11 & 12?!!! I have used Control>Programs>Unistall get message "This action is only valid for products that are currently installed" & 2.59 GB remains for each version !!! I need to free up same space on C:

    Hi,
    If you get the same message when uninstalling versions 10, 11 & 12 then it suggests a system problem which I had hoped the fix it tool would sort out. Did it find any problem but was not be able to fix it or just not find anything? Not all software uses the same installation tools which is why other software may work. Has all the Windows updates, including optionals, been applied?
    You could try a registry cleaner like ccleaner - that may detect some registry errors.
    Otherwise, you will need to do a manual removal.
    Photoshop Elements 10
    http://helpx.adobe.com/photoshop-elements/kb/manually-remove-photoshop-elements-10.html
    Photoshop Elements 11
    http://helpx.adobe.com/photoshop-elements/kb/manually-remove-photoshop-elements-11.html
    Photoshop Elements 12
    https://helpx.adobe.com/photoshop-elements/kb/manually-remove-photoshop-elements-12.html
    Good luck
    Brian

Maybe you are looking for

  • Search and replace string inside a column

    Hi, in my table there is Column A with Type NVARCHAR. i need to search inside all the rows in that column to find the string "_TH" and remove it wherever it exist. how can i do it?

  • Please explain ....

    Verizon Wireless More Everything Plan was a "Mistake", literally! "Wow, you guys were screwed" said the Verizon representative at the store we went to visit. Dear Verizon Wireless, My wife and I have been loyal (paying) customers for over a decade. 

  • Mapping Dynamic File Names - JDev 10.1.3.1.0

    It is important for me to be able to capture the name of the inbound file while mapping in the XSL builder. I need it to be mapped to an XML value on the target side. The file name will be dynamic so it will not be possible to hard code it. Is anyone

  • Design Time Repository question.

    Hi, I'm clustering my SOA Suite per a consultant and this documentation: http://download-west.oracle.com/docs/cd/B31017_01/core.1013/b28939/j2ee.htm In section 3.1.19 Configuring JNDIs for the Topic and Topic Connection Factory, it states: Using Orac

  • How can I colour pop a moving object in a stop-frame animation in After Effects CS6 (Creative Cloud)

    Hi, The title pretty much explains what I want to achieve. I have a black and white video and I want to colour pop a moving object in it with it's original colours. I'm a full member of the Creative Cloud and so have all the suite available to me. Ho