How to update capacity util. level & Work hours in IT -8

Dear Concern,
There is a problem in updating capacity util. level & Work hours in IT -8 in the T -Code -PA30. It is still showing Capacity 0% & Work Hours -0 hr monthly. We have already updated the same as 100% & 208 hr. monthly in Info Type-7 , inspite of then, the same has not been automatically updated in Infotype 8..
Please advice how can we update Capacity Utilisation & Working hours in the Infotype 8 as we have already updated it in the Infotype 7.
Thx

You cannot show a specific timespan, e.g., 8AM to 5PM, and hide the remaining hours. However, you can highlight the working hours of the day by implementing getWorkingStartTime and getWorkingEndTime on the Resource.
You can specify the workingTimeColor attribute (optional, there is a default) on Gantt to set the working time color.

Similar Messages

Reading Capacity Utility Level of employee..

Hello Experts,
how do I read the capacity utility level of an employee for each month. Is there any table like the RT or the CRT tables which can give me the CUL from the payroll results? Any help would be highly appriciated.
Thanks & Regards,
Greg

You can find it on Infotype 8 and it is in the WPBP table of the Payroll Results.

How can I display assignment-level Work in hours and days in the same view?

I have a view based on Task Usage and I shows the Work figure for each resource assigned to a task. My Options settings are to display Work in hours. Want I'd like to do is have a custom field to calculate the equivalent number of days for each
assignment-level work value. Our hours per day are 7.4 so the calculated field should be [Work]/7.4.  eg.
Task Name > Work         > Work-days (Calc'd Field)
Task 1
    Fred        > 7.4 hrs     > 1 days
I tried creating a Resource custom field to do this but what displays is the value of the Task-level Work and this same value is repeated on every assignment row. MSP is not using the Work value of the assignment.
Is there a way to acheive this view?
Thanks
John

You're welcome John.
You could have a calculated task custom field which could divid the work in hours by 7.4 hours, but even like this you couldn't add it to a usage view and it would be only at task level, not assignment. Maybe a VBA macro could switch automatically the option
but I'm not sure.
If a reply above helped you, please mark it as an answer so other users with a similar concern can refer to it.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

How to update Serial Number from Work Order to Sales order in MTO flow

Helo Experts,
I have a requirement to update automatically the Serial number in Make to Order flow, from the Work order to the sales order and then to delivery.
In fact the flow is the following, when raising the sales order we don't know the SN, it will create a Work order with stock type E, when work order is released a Serial Number is assigned to the material created. After Goods receipt of WO, We need to have the SN updated in the sales order and then in the delivery.
I tried with the parameters of Serial number profile, i was not able to update from WO to Sales Order.
DO you have any idea how this requirement could be fullfiled? is it possible in standard?
Thanks

I don't think that it is possible in standard.

How get update for Reader to work?

WHen I try to update Reader 10, the installation aborts. I get an error message as follows,
"Error has occurred in script on this page 'Retrievng Install'
Line: 1
Char: 12948
Err: object expected
Code: 0
URL: http://127.0.0.1.1908/app/_js/adobe.js"
I am asked, Do I want to continue writing scripts. When I press "yes" nothing happens. I need the current update to read a file I need. This has happened several times, so I am behind on updates.
How do I get the download to work?
Earle Fox

If you are running Windows, try the Acrobat/Reader Cleanup Tool.
http://labs.adobe.com/downloads/acrobatcleaner.html
Then try to download Reader from: http://get.adobe.com/reader/enterprise

How Sun Update Connection Proxy really works

Hi,
Apolgies if this question is in the FAQ, but the FAQ link in the header text of this forum gives me a 404.
I've been trawling the docs on Sun Update Connection Proxy and trying to understand how it works with regards caching. The docs are quite detailed in how to set it up, for example how to point to a proxy using http://<proxy-name>:3816 etc., and how to install patchsvr and how to start it.
What seems to be missing from the manuals IMHO (and this all might become blatantly obvious once I've been using it a while) is any details on how the smpatch update process works end-to-end through a proxy, e.g. I know how to change the cache location using the patchsvr command but how and when is anything stored in that location? What are all the files and directories that reside under /var/sadm/spool, and how many of these relate to a proxy (LPS) server?
Is smpatch supposed to clear out the .jar files in there or do I need to set up a job to do that regularly?
Hope someone can point me in the right direction.

Inside /var/sadm/spool there are several directories, I won't describe all of them, but for most purposes this should be enough:
Client:
/var/sadm/spool/cache/Database - stores patchsets (current2, etc)
/var/sadm/spool/cache/xml - stores the MoTD files
/var/sadm/spool/cache/entitlement - stores the entitlement file (note this is generated by the server on each request)
/var/sadm/spool/cache/updatemanager/analysis.results - if you have the swupAuto cron job, this directory is used to hold analysis to speed up UM launch
/var/sadm/spool/cache/ReadMe - holds the patch readme's (mostly for use with UM)
/var/sadm/spool/cache/collection - holds a file containing information about available patchsets
/var/sadm/spool/cache/category - holds a file describing the types of patches (currently Update Tools, Security, Recommended, and Generic)
/var/sadm/spool/sunucLog - holds job_history.log
Proxy:
/var/sadm/spool/patchsvr - this holds all files required for analysis and patches with URL-encoded filenames, the files used to be stored in a more hierarchical directory structure, but this changed a few patch revisions ago.
As for cleaning, in general it is safe to delete all files under /var/sadm/spool/cache/ as all of the patches are stored at /var/sadm/spool/ and most other files should be replaced on a regular basis automatically, however you may want to remove all of the patches too once you have completed your patching sessions - this is not done automatically. On the proxy you might not want to be so thorough - you would normally want to keep the patches (or at least keep the most recent ones - 180 days in this example):
# cd /var/sadm/spool/patchsvr
# ls | grep -v all_signed | xargs rm
# find /var/sadm/spool/patchsvr/ -mtime +180 -exec rm {} \;Does this answer your questions, or do you need further explanation?

How to update the dunning level and dunning details: BAPI/FM??

Hi All,
I need to update the dunning history details(dunning level) for a contract account.
I am using the table FKKMAKO(dunning header).
Let me know if there is a Function module/BAPI/ any other way to update the dunning history details
Regards
Shiva

Hi,
Can you check if these FM's are useful:
CRM_MKTPL_GET_BP_SALES_AREAS
CRM_MKTPL_AL_FILL_PRODUCT
Hope this helps.
Regards,
Anup

How to update older pdfs to work with Adobe X

We have documents posted on a website and use a href link (html) to open pdfs to specific sections of the pdf which are highlighted. These pdf's were created with QuarkExpress and Acrobat Distiller 7.0 and do not work properly with Adobe X. It appears that the older pdf's contained comments that act similar to html anchors, in other words the comment is labled and that lable name is called from the html web page: "nameofdocument.pdf#somename"

You should read this: http://partners.adobe.com/public/developer/en/acrobat/PDFOpenParameters.pdf

Default Daily working hours

Hi all,
How can I default the daily working hours from infotype 0007 and set it to the weekly view table for the current day/date on the click of button 'Submit'.'Submit' is the new button I want to create in this view.
Thanks
Kukku

Hi,
Please check the following link
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/76a6d7fd3a4e91bfb422405bf3e04d/frameset.htm
Navigate to Employee Self-Service Application>Working Time>CATS Regular/Record Working Time-->Default Values for...
<removed_by_moderator>
Regards
Sarath

Project 2013 - entering work hours at a monthly level

Hi all,
Any help with this 'hopefully small' problem will be hugely appreciated. It's not so much a problem, but
me still being new to Project - sorry! As a summary of what I am working with:
I have entered a list of tasks (all set to Manually Scheduled).
I have entered a number of resources into the Resource List.
I have also assigned relevant resources to the tasks.
Using the Task Usage view, I would now like to begin entering Work hours for the resources assigned to the
tasks. We are planning at a monthly level, so I know how many hours each resource is expecting to be spending on each task over each month.
I have set the Timescale of my Task Usage screen to a monthly scale, thinking that this would allow me to
enter total hours for each month. As an example, one of the resources assigned to a task is set for 15 hours of Work in April. It all seems to look OK on input.
My problem is however, I would like the Start and Finish fields to reflect this, and span over the months
in which the Task's resources will be doing work. It doesn't seem to pick up the month accurately. Although I have entered the 15 hours in the column labelled April, the Start and Finish dates have come out as 30/04/14 and 30/05/14 respectively. I was hoping
the Start and Finish times of that row to be 01/04/14 and 30/04/14 respectively, but they are a month out of line, and has show the work to be happening over May, not April. Is there y way I can change this?
I hope this makes sense as a question? Any help at all would be brilliant. Please do let me know if I've
missed any detail and you need some more info. I'll also continue looking through the forums to check if this has already been asked.
p.s. I tried to upload an annotated image, but my account needs to be verified first. Do I need to do anything to request this? I didn't receive any usual 'verification' links in MS's email on opening this account.
Thanks very much,
ac18

Hi John, Julie,
Thank you both very much for the help! Yes good spot, I did post it on both forums (http://www.msofficeforums.com/project/21190-project-2013-entering-work-hours-monthly-level.html) - it's been years since I've used forums of any kind, and it's great to see
experts being active across multiple sites!
I have given both suggestions a try, but unfortunately am still not quite there yet.
John, although your tip seems to work OK, I think I was hoping to find a way for the Start and Finish times to automatically span across the Work hours I have entered. If I was to then enter another 5 hours, but this time for March, the Start-Finish dates
should auto update to be 01/03/14 - 30/04/14. I understand now that this may require me to be on an Automatically Scheduled project?
Julie, your screen shot on the msofficeforums.com website is exactly what I am looking to achieve! I would like to enter month-level Work data, and that looks to be exactly that. I did try entering a zero in the month immediately after the last month that
had hours in it, but Project seemed to simply ignore it, with no visible change to the dates.
I have done some further investigating, and there does seem to be something different happening with my Project version (it's Proj Prof 2013). I have access to another computer with Project 2010 installed on it, and this doesn't seem to cause an issue. Note,
I did need to have set the tasks as Auto Scheduled.
Essentially, if I try and exactly replicate Julie's example on both versions with the following steps, I get slightly different results:
Tasks set to Auto-Scheduled.
Set Project Start Date to 01/01/14
Enter some resources.
Switch to Task Usage view.
Set the Timescales on the right hand side to: Bottom tier=Months, Middle tier=Quarters.
Enter a task.
Assign resources to the task. At this point, by default 8 hours worth of work appears for each assigned resource. In 2010, these hours appear in the January 14 column. But on my 2013 laptop however, these hours appear under the December 2013 column. Strange?
Anyway, in both cases I clear these default hours by entering zeros in their places.
I now enter 15 hours under April 2014 for one of the resources on the task.
In 2010, the Start and Finish dates of the assigned resource's row update to 01/04/14 - 30/04/14.
In 2013 however, the Start and Finish dates update to 30/04/14 - 30/05/14.
I have a feeling that this discrepancy is perhaps at the heart of my problem? Is there a setting with the application that I am not making?
Thanks again,
Arjun

I have 2 ipod touch's that both have frozen screens and will not reset or show up in itunes. They both froze after trying to update to the latest software version. How do I get them to work?

I have 2 touch's that froze when trying to update to the latest ios version. Neither respond to restarting the devices. They are also not recognized in windows or itunes. How do I get these to work. I followed all of the instructions on the apple website and they still don't work. I have verified that I have apple support for mobile devices installed in itunes and my version of itunes is 11.0.1. I am running windows 7 64bit with service pack 1 installed and all of my updates are current. Is anybody else having this problem with their apple devices?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Has anyone been able to contact Adobe to learn why their Flash Player does not work on Mac OS 10.6.8, no matter how many updates you install? This seems like a big error by Adobe.

I have thee Mac computers with Mac OS 10.6.8, one of which is a Mac Pro. No matter how many updates I install from Adobe, their Flash Player does not work on any of these 3 computers. I don't know how to contact Adobe Systems about this problem, but I think it is their responsibility to make sure that their so-called "universal" software works proplerly on a relatively recent operating system like OS 10.6.8 that is still in widespread use. When you install the updates, nothing happens -- not even an error message. What is the point of a universal player that is not universal? It works fine on my MacBook Pro with OS 9 Mavericks, but it does not work at all -- indeed, has never worked -- on my 3 Macs with OS 10.6.8. Has anyone contacted Adobe Systems to find out why the Flash Player does not work with OS 10.6.8 and what they plan to do about it?

Where are you getting Flash from?
Get the appropriate dmg installer here and then run it.
http://www.adobe.com/products/flashplayer/distribution3.html
If it still won't install, do these two things: First uninstall any Flash by going into the second level Hard Drive Library>Internet Plug-ins, and trash the Flash Player.plugin and flashplayer.xpt. Then boot into Safe Boot, Shift at the startup chime (give it much longer than a usual boot) and run the installer while booted in Safe Boot.

How to update the service order status at meter level

Hi
I need to fetch one open service order and update the retrieved open service order status at meter level.
I am trying to do it through BAPI_ALM_ORDER_MAITAIN but i am not able to do it.
Please let me know the process how to update.
Thanks & Regards
Pallavi

Hi,
Check if this code works ...
REPORT zbapi .
DATA t_meth TYPE TABLE OF bapi_alm_order_method.
**Internal table for Operation (BAPI)
DATA t_oper TYPE TABLE OF bapi_alm_order_operation.
DATA t_comp TYPE TABLE OF bapi_alm_order_component.
**Internal Table for Opertaions UP (BAPI)
DATA t_comp_up TYPE TABLE OF bapi_alm_order_component_up.
**Internal table for BAPI Return code
DATA t_ret TYPE TABLE OF bapiret2.
***WORK AREA DECLARATIONS
**Work Area for Hedaer
DATA:wa_header TYPE caufvdb,
wa_meth TYPE bapi_alm_order_method,
wa_op TYPE afvgb,
wa_comp TYPE resbb,
wa_comp1 TYPE bapi_alm_order_component,
wa_comp_up TYPE bapi_alm_order_component_up,
wa_oper TYPE bapi_alm_order_operation.
PARAMETERS:TEST.
****Fill Method Internal table
CLEAR wa_meth.
wa_meth-method = 'SAVE'.
APPEND wa_meth TO t_meth.
wa_meth-refnumber = sy-tabix.
wa_meth-objecttype = 'COMPONENT'.
wa_meth-method = 'CHANGE'.
wa_meth-objectkey(12) = '000004000104'.
wa_meth-objectkey+12(4) = '0010'.
wa_meth-objectkey+16(4) = '0010'.
APPEND wa_meth TO t_meth.
**Component Internal table
wa_comp1-reserv_no = '0000001072'.
wa_comp1-res_item = '0001'.
wa_comp1-activity = '0010'.
wa_comp1-item_number = '0010'.
wa_comp1-special_stock = 'B'.
wa_comp1-requirement_quantity = '15'.
wa_comp1-stge_loc = '0001'.
wa_comp1-backflush = 'X'.
APPEND wa_comp1 TO t_comp.
**Component Update Internal table
wa_comp_up-special_stock = 'X'.
wa_comp_up-backflush = 'X'.
wa_comp_up-requirement_quantity = 'X'.
wa_comp_up-stge_loc = 'X'.
APPEND wa_comp_up TO t_comp_up.
**Call Bapi
BREAK-POINT.
CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
TABLES
it_methods = t_meth
it_component = t_comp
it_component_up = t_comp_up
return = t_ret.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'. <--- Hope u r using this too
regards,
Naveen
Edited by: Naveen Deva on Apr 16, 2009 9:12 AM

Updating work hours

Greetings everyone,
I'm trying to update a field in a table with the total work hours in a specific month. To achieve this I've tried using a piece of SQL found in several other threads to retrieve the number of work days in a month. This doesn't work properly in my case however, since the subquery doesn't know the reference to a field on a higher level. Here is the SQL:
UPDATE PS_EMPL_WRK_HRS Z SET WRK_HRS = (
SELECT Z.STD_HOURS * (SELECT COUNT(*)
    from (select trunc(Z.EFFDT, 'mm')+level-1 dt
           FROM   DUAL
           connect by level <= last_day(Z.EFFDT) - trunc(Z.EFFDT, 'mm')+1
    where to_char(dt, 'dy' ) not in ('sat', 'sun')) END AS WRK_HOURS
FROM PS_GENL_DEDUCT_NLD GD
WHERE   Z.EMPLID = GD.EMPLID
AND Z.EMPL_RCD = GD.EMPL_RCD
AND (GD.DEDUCTION_END_DT >= Z.EFFDT OR GD.DEDUCTION_END_DT IS NULL)
)The error message will be ORA-00904: "Z"."EFFDT": invalid identifier, because the subquery to retrieve the number of workdays in a month doesn't know about the Z alias.
The PS_EMPL_WRK_HRS contains the EMPLID, EFFDT and STD_HOURS. For each employee the record contains one row for each last day of the month, which is stored in the EFFDT field.
Any help would be appreciated!
CREATE TABLE PS_EMPL_WRK_HRS (EMPLID VARCHAR2(11) NOT NULL,
   EFFDT DATE,
   STD_HOURS DECIMAL(6, 2) NOT NULL,
   WRK_HOURS DECIMAL(6, 2)
Insert into PS_EMPL_WRK_HRS (EMPLID,EFFDT,STD_HOURS) values ('010382',to_date('31-05-2013','DD-MM-RRRR'),40);
Insert into PS_EMPL_WRK_HRS (EMPLID,EFFDT,STD_HOURS) values ('010382',to_date('30-04-2013','DD-MM-RRRR'),40);
Insert into PS_EMPL_WRK_HRS (EMPLID,EFFDT,STD_HOURS) values ('010382',to_date('31-03-2013','DD-MM-RRRR'),40);
Insert into PS_EMPL_WRK_HRS (EMPLID,EFFDT,STD_HOURS) values ('010382',to_date('28-02-2013','DD-MM-RRRR'),40);
Insert into PS_EMPL_WRK_HRS (EMPLID,EFFDT,STD_HOURS) values ('010382',to_date('31-01-2013','DD-MM-RRRR'),40);Edited by: Michel on Feb 5, 2013 3:53 PM - Added CREATE and INSERT script

Fixed it already:
UPDATE PS_EMPL_WRK_HRS Z SET WRK_HOURS = (
CASE WHEN (SELECT
1
FROM PS_GENL_DEDUCT_NLD GD
WHERE   Z.EMPLID = GD.EMPLID
AND Z.EMPL_RCD = GD.EMPL_RCD
AND (GD.DEDUCTION_END_DT >= Z.EFFDT OR GD.DEDUCTION_END_DT IS NULL)) = 1
THEN 1 ELSE (Z.STD_HOURS - Z.DED_HRS_ILL_K ) * (SELECT COUNT(*)
        FROM
          (SELECT rownum rnum
          FROM ps_country_tbl
          ) Y
        WHERE y.rnum <= Z.EFFDT - to_date(TO_CHAR(Z.EFFDT,'YYYY-MM')||'01','YYYY-MM-DD') + 1
        AND TO_CHAR( Z.EFFDT + Y.RNUM - 1, 'D' ) NOT IN ( '1', '7' )
        ) END );

Time updation for Support desk message and business calender working hours

Hi Experts,
I would like to know how to set the time updation of Support desk message in CRM_DNO_MONITOR. After i receive a new message in it, I can see the from timing and to timing (even after changing the status of message) as 00:00:00. Is there any standard job to automatically update the timing of message?
Also i would like to know, how to set the working hours for various days. Lets say i want to set my business hours for Monday from 10am to 6pm and for Tuesday as 9am to 5pm.
Suitable points will be rewarded.
Thanks in advance,
Naresh Dodeja.

Hi,
The reason is "created by me" selects the role "Creator" of a message/notification.
There are three roles "Creator", "Contact" or "Reporter" and "Responsible" or "Processor".
The creator is identified by his user name and the others by their BP-ID.
Therefore using the report "created by me" does not work if your users are defined for BPgen only.
That it works you have additionally to define in BP the role "BUP003 - Employee".
You find in the transaction BP for "BUP003 - Employee" in the tab "identfication" a field "User Name".
If you enter the User-ID the user has in the Solution Manager then it works.
Good look!
Best regards,
Adelbert

How to update capacity util. level & Work hours in IT -8

Similar Messages

Maybe you are looking for