How to Update Infoobject Masterdata using Process Chain

Hello,
I am trying to update the Master Data in Infoobjects (text and Attr) by using Process chain.
The steps used are
1. Delete data from PSA
2. Execute Infopackage
3. Execute DTP for Attr
4. Run Attr Change
5. Execute DTP for TEXT
While updating Text, I am receiving error for duplicate entry.
I am trying understand the correct process to update Infoobject Master Data in BI7 (SCM5/5.1). Please adivse.
Thanks,
Sanju

HI Narendra,
In process chain functions, you can use the process type with the name Trigger Event Data Change (for BEx Broadcaster)
The above process type must be used to determine which InfoProviders should be checked for data changes. You can specify multiple InfoProviders within this process type either directly (by simply entering the names of the InfoProviders) or indirectly by specifying the name of the variant based on one of the following process types:
Execute InfoPackage (LOADING)
Activate DataStore Object Data
Update DataStore Object Data (Further Updating)
Read PSA and Update Data Target
Hope this helps
Regards,
Sathya

Similar Messages

How to delete Master data using Process Chain

I need to delete data in respective data targets such as Infocubes, DSOs & Master data Infoobjects. It was fine with Infocubes & DSOs using respective process type. But the issue is with Master data Infoobjects.
Is there any process type by using which I can delete data in Master data Infoobjects using process chain?

Murali,
Master data object process type is not there because in BW, master data is conformed or is shared by other infoproviders. Due to this dependency, master data loading is a bit more complex. You need to drop all the data from all the infproviders which are using the master data you want to delete.
-Saket

Loading Data Using Process Chains

Hi All,
we are having 3 layers for loading data using DB connect i.e 1st and 2nd layers we are having DSO's and the 3rd layer is cube.we are following the following updates for the 3 layers
1st layer- full
2nd layer - delta
3rd -delta
is there any possibilites of getting duplicates in the cube and if so how to solve this one using process chains
regards,

Hi,
Your dataflow looks ok.
Hopefully you are using "Std DSO", there is no chances of getting duplicate records.
But in case...
If you are using "WO DSO" with check box "Do not check Uniqueness of records"
In this situation you will get the duplicate... as "WO DSO" with this property will simply keep on adding adding the records.
Thanks
Mayank

How to load hierarchies using process chains

Hi ,
Can any one please explain the steps for loading hierarchies using process chain.whenever i drag the hierarchy infopcakage Save variant is also coming by default,so do we need to have different SAve variant for different hierarchy infopackages or can we have one save variant for all the hierarchy variables.
Thanks,
Vaka

Hello Veka,
How r u ?
Yes ! SAVE Variant & Attribute Change Run will add up while loading the Hierarchy InfoPackage.
Provide the InfoObject Name for which u r loading the Hierarchy in the SAVE variant and SAVE it. The same will be transferred to the Attribute Change Run also.
If u r creating the Chain with more InfoPackages then have the Save Variant & Attribute Change Run at the last.
Best Regards....
Sankar Kumar
+91 98403 47141

HOW TO LOAD R/3 DATA INTO SAP BI USING PROCESS CHAINS?

Hi,
Can we load R/3 data into BI using process chains?... I loaded data from R/3 into Infocube using generic extraction using view... took 2 tables EBKN and EBAN and ceated view.
In PSA I can find all the 2388 records but when I load into datatarget in transferred tab there are 2388 records but in added colum i could find only 2096.....
I deleted the request and want to load through process chains....... but how to do ?????? without flat file ...can we laod using process chains?
I appreciate any inputs.......
Regards,
Prasanthi.

did you even bother looking at the links in my previous posts???
read the docs...try yourself...if you encounter specific issues, you can post them on the forum...
if you're really expecting somebody to post a step by step for process chain, i think you can wait a long, long time...

How to delete requests in PSA using Process chains

Hi All,
Can anyone explain me how to delete all the requests in PSA using Process chains.
This is what I did...
1. use Process type 'Deletion of Requests from PSA'
2. Settings:
Object Type - PSA table
Object Name - <Datasource name>
Older than - 0 (Zero) days
These settings doesn't work. Can you please let me know exact settings to use for deleting all the requests in PSA of a datasource.

Hello Praveen,
That's what I thought too. But if I use '1' one day, what if I need to run it twice same day? So this doen't work for my requirement.
Any other suggestions?
Thanks.

How to run R3 program in BW using process chain

Hi,
I need to run a delta program of R3 in BW using process chain.
Can any one suggest me how to do that.
Its urgent.
regards
Bhanumathi

hi
Use the ABAP Program process type.
http://help.sap.com/saphelp_nw04/helpdata/en/d5/e80d3dbd82f72ce10000000a114084/frameset.htm
Regards
Dina

How to debugg by using process chains?

HI,
i got the reguirement to debugg using process chain .
regards
venkat

Debug an ABAP ? Debug a Process chain itself ?
Se38 contains the debugger for ABAP.
RSPC log monitors will allow you to drill into the results of your process chain and its actions.

Loading from flat file to dso using process chains

hi,
i am using BI7.0
i am new to process chains
can anyone explain how to load data from flat file to dso using process chains(i have created all the objects created) preffered if explained with an example

You can find a lot info if you can searh SDN.
Metachain
Steps for Metachain :
1. Start ( In this variant set ur schedule times for this metachain )
2.Local Process Chain 1 ( Say its a master data process chain - Get into the start variant of this chain ( Sub chain - like any other chain ) and check the second radio button " Start using metachain or API " )
3.Local Process Chain 2 ( Say its a transaction data process chain do the same as in step 2 )
Steps for Process Chains in BI 7.0 for a Cube.
1. Start
2. Execute Infopackage
3. Delete Indexes for Cube
4.Execute DTP
5. Create Indexes for Cube
For DSO
1. Start
2. Execute Infopackage
3. Execute DTP
5. Activate DSO
For an IO
1. Start
2.Execute infopackage
3.Execute DTP
4.Attribute Change Run
Data to Cube thru a DSO
1. Start
2. Execute Infopackage ( loads till psa )
3.Execute DTP ( to load DSO frm PSA )
4.Activate DSO
5.Delete Indexes for Cube
6.Execute DTP ( to load Cube frm DSO )
7.Create Indexes for Cube
3.X
Master loading ( Attr, Text, Hierarchies )
Steps :
1.Start
2. Execute Infopackage ( say if you are loading 2 IO's just have them all parallel )
3.You might want to load in seq - Attributes - Texts - Hierarchies
4.And ( Connecting all Infopackages )
5.Attribute Change Run ( add all relevant IO's ).
Start
Infopackge1A(Attr)|Infopackge2A(Attr)
Infopackge1B(Txts)|Infopackge2B(Txts)
/_____________________|
Infopackge1C(Txts)______|
\_____________________|
___________________|
__\___________________|
___\__________________|
______ And Processer_ ( Connect Infopackge1C & Infopackge2B )
__________|__________
Attribute Change Run ( Add Infobject 1 & Infoobject 2 to this variant )
1. Start
2. Delete Indexes for Cube
3. Execute Infopackage
4.Create Indexes for Cube
For DSO
1. Start
2. Execute Infopackage
3. Activate DSO
For an IO
1.Start
2.Execute infopackage
3.Attribute Change Run
Data to Cube thru a DSO
1. Start
2. Execute Infopackage
3.Activate DSO
4.Delete Indexes for Cube
5.Execute Infopackage
6.Create Indexes for Cube
Some Links
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c

Deletion of changelog data using process chain

Hi All,
I have a requirement where i have to delete the changelog data for particular set of data using process chain.we have an option of deleting the entire data from changelog but how to delete only a particular set of data?????

If you are on BI 7 than,
Choose "Deletion of Requests from the Change Log" from process category Further BI Processes by double-clicking.
Create a new process variant and in the variant maintenance screen select Type of Object as Change Log Table
Under Name of object select DSO name
Specify the requests that need to be deleted by determining the days or dates. You also have the option to specify whether you only want to delete successfully updated requests, and/or only incorrect requests that are no longer updated in an InfoProvider.

How to add Abap program in process chain to check the another process chain status and do accordingly

Hello All,
My requirement is related to process chain 1 . I have one process chain in that i have to put abap program in middle of that chain . This program will check the status of one another process chain 2 status ( whether it was completed or it is going on). if it is completed then continue the Process chain 1 to further activity else wait to complete Process chain 2 .
Here i have to use process chain 2 as a parameter.
Kindly provide me solution .
Regards
Saurabh

Hi Saurabh,
You need to create ABAP program in which you check the values for required process chain in
following table
RSPCLOGCHAIN (Feilds ANALYZED_STATUS LOG_ID)
Depend on values you can trigger next process or you can wait unitil this process chain complete.you need to check status from table using ABAP.
If you are not aware about how to write ABAP program then take help from ABAP Team.
Regards,
Ganesh Bothe

Attr changes runs for all Infoobject in a process chain

Hi,
I have a process chain for the master data ( ATTR, TEXT and HIER),I want a Hierarchy/attribute change run like a last process in my chain and actives all the InfoObject and Hierarchy.
How can I carry out the structural changes for all InfoObject in a process chain?
Thanks!

yes but it requests me a variant. then a layout "execute infopackage", then the attr change doesn´t have Object.
I don´t know what I do?
This process actives all my ATTR and HIER in my chain???
Message was edited by: Victoria León

Initial full load of Master data using process chain

Hi All,
Could you please help me regarding, initial master data load to characteristics with attributes and text. I need to load master data to 23 info objects, by using process chain can I do full load of master data to all info objects at a time. And one more doubt is, as per my knowledge we can't maintain more than one variant in an info package, is that right ? or we can ?
Means Start Variant -> Info Package (0Customer_Text, 0Customer_Attr,0BILL_TYPE_TEXT, BILL_CAT_TEXT) -> DTP ( ", ", ", ") -> ACR.
Your Help will be appreciated.
Thanks & Regards
Sunil

Hi,
"I need to load master data to 23 info objects, by using process chain can I do full load of master data to all info objects at a time."
if there is no dependency between attributes then you add you can create process chains and trigger them at a time. No issues.
we can't maintain more than one variant in an info package, is that right ? or we can ?
With one info pack you can't load data to all 23 psa. because each data source have own psa. you need to sue 23 info packs.
in general start variant--> info pack --> dtp (assuming as your bw 7.x)---> attribute change run.
like that you need to create 23 chains
Or create one two big chains.
one is for attribute and another for text.
In attribute
start varaint--> info pack(info bject 1)--DTP(infoobject 1))--> info pack(infoo bject 2)-->dtp(infoobject 2).
Like that way you can create in series and parallel chains to load attributes data into info objects. at end you add change run for 6 info objects each. SAme you can do for text loads also.
Thanks

Delete Master Data using Process Chain?

Hi Friends,
How do I delete Master Data using Process Chain?
Thanks,
Pradeep

Hi Bhanu,
I am not sure why we would want to delete MD. But that is the task given to me. I actually know it is not possible. But is there a way to delete MD using chains?
Thanks,
Pradeep

Selectively deleting load from ODS using Process Chain

Hi All,
I have a requirement in which I have to delete the last load of the current month if any and leave the load of the last month untouched which has to be done using process chain.
I will try to elaborate the condition required like say we have a data for June in the ODS already (date 10) and when the load for July will come it will not touch the June data but on 2 July the load of first July will be deleted without touching the load from June 10. (The PC will run for the first 10 days of the month).
How can this be implemented, There seems to be some FM for this but are there any other method by which the same can be implemented without much use of ABAP.
Any relevant suggestion would be awarded points
Regards,
Samved

Hi Bhanu,
Thanks for the reply.
I tried to generate the program but that can be used for selective deletion from the ODS i think soo.
But my requirement is basically to delete the complete request from the ODS and not any selective deletion and at the same time I cannot use the complete deletion option as that will delete the request from the last month also.
Are there any optioin at the level of Info package which can be used for these type of deletion.
Regards,
Samved

How to Update Infoobject Masterdata using Process Chain

Similar Messages

Maybe you are looking for