How to update PO invoice plan?

Dear all,
I need to update Start-date and End-date of PO's invoice plan, the two dates storage in a Z-table.
Anyone who can tell me which function module I should use or how I can achieve this functionality.
Thanks very much!
Best Regards.

>
kumar kaduri wrote:
> Hi,
>
> You didn't mention about the link of your Z table to PO Invoice. I think it must be updated in any user Exit while crating PO. If not there must be some Z program for it. Even z program doesn't exist, you need to write a zprogram if you want to update it after creation of PO Invoice or if you want to update your z table while creating invoice, you need to write code in user exit.
>
> Kumar.
>
> Edited by: kumar kaduri on Jun 29, 2009 11:17 AM
Hi Kumar
Sorry I haven't describe it clearly.
First I create a PO with Invoice Plan, but the Start-date and End-date is estimated.
Then vendor will send the actual dates of invoice plan, and these data will be stored in Ztable.
Finally a Zprogram will be executed to update the Start-date and End-date of the invoice plan.
I need to write code in the Zprogram to realize this functionality.
Thanks.

Similar Messages

How can I settle invoicing plan with defining withholding TAX Parameter

Dear All
         Please kindly help me to answer this question, How can I settle invoicing plan with defining withholding TAX Parameter.
I've already create PO Framework Order by specify Invoicing Plan Periodic automatic settlement.
        But, We can found with holding tax parameter on the tab of invoicing plan in PO.
       Please help me.

Hi,
From my understandinging in case of withholding tax there is no provision to manage from procurement side.
At the time of MIRO or payment run users have to select the applicable
withholding tax code ( During MIRO withholding tax pop up will appear).
Withholding tax is a component within FI: FI-AP-AP-Q
Regards,
Edit

How to update CO-PA planning manually ?

hello everyone.
i used to upload CO-PA planning by KE13N (upload by excel).
but now i have error that i cannot solved (I request SAP customer message ).
so i have question that i can update CO-PA planning in SAP directly or not ?
if yes, please specify transaction code. and how to.
thank you very much for your time.

No .. ,like CCA.. you cannot plan COPA plannng fully manually ....
You have to use KEPM or KEFC upload .......... Some datas like COPA assessment cycles can be transferred from other modules..
Can you share the problem you are facing in KE13N
Regards
Sarada

How to update excise invoice values after migo.

Hi Guru's,
I have checked the forum. but did not get exact solution.
Here im having the problem with bapi BAPI_GOODSMVT_CREATE . This bapi don't have the structure to update excise invoice values.
I have one bapi 'BAPI_EXCINV_CREATE_FROMDATA' to update the excise duty, but in that also i didn't find the structure
'J_1IEXITEM' to update the ECS value ( field is 'total_ecs').
Please help me on this,Thanks in Advance...
Regards
Naren

Hi Krishna
Do not do excise invoice capture during 103. At that time select the option "No excise entry". Then capture excise invoice during 105.
The system messge " No selectable items for this document" is prompted since the preceeding document is already assigned with invoice.
Try this and give feedback.
regards
sairam akundi

How to update AR Invoice Matrix (UDF)

Hi,
I want to load the matrix data to a custom form. After user updates the custom form data. Then, get back the data to matrix.
Now I am using the following code:
- Get matrix value
For i = 1 To mMatrix.VisualRowCount
   Dim tmp as stsring = mMatrix.Columns.Item("U_UDF1").Cells.Item(i).Specific.value
   Dim tmp as stsring = mMatrix.Columns.Item("U_UDF2").Cells.Item(i).Specific.value
Next
- Update matrix value
For i As Integer = i To mDataTable.Rows.Count - 1
   mMatrix.Columns.Item("U_UDF1").Cells.Item(i + 1).Specific.value = mDataTable.GetValue("Value1",i)
   mMatrix.Columns.Item("U_UDF2").Cells.Item(i + 1).Specific.value = mDataTable.GetValue("Value2",i)
Next
Have any better solution? If the matrix's sorting order is changed, all the data will be wrong. How can solve this problem?
Regards,
On

The problem you are facing is because both AR Inv and AR Res Inv are stored in the same table OINV. The AR RESERVE Invoice is differentiated by the OINV field isINS which will have a Y when the Invoice is an AR Invoice. Checking this field is they approach.
1. Add a database field (let us presume this is Field_341)
Table: AR Invoice
Field: isINS - Reserve Invoice
2. Add a Formula Field
Formula: Field_341 == "Y"
3. Add another Formula Field
Formula: Field_341 != "Y"
4. Add another Text Field:
AR Reserve Invoice
To the Text field which has INVOICE link the formula in Step 3
To the Text field which has AR Reserve Invoice link the formula in Step 2
THIS WILL WORK

Purchase Order with Invoice Plan

Hi,
I need to understand working with Invoicing plans for a Purchase Order. Especially the service PO for the rents and other related services.
How the PO is linked to the Invoice Plan and how the process happens in SAP?
Thanks in advance!

Creating an Invoicing Plan
The following procedure describes how to create an invoicing plan with the pre-Enjoy ordering transactions (ME21, ME22, ME23).
The procedure described is also applicable u2013 with certain restrictions u2013 to the Enjoy purchase order (ME21N, ME22N, ME23N).
If you are using the Enjoy purchase order, you will find:
·         The Invoicing Plan button and the indicators for GR-based invoice verification (GR-Based IV), service-based invoice verification (Srv.-Based IV), evaluated receipt settlement (ERS), and invoice receipt (Inv. Receipt) among the item details on the Invoice tab page.
·         The account assignment among the item details on the Account Assignment tab page
·         The Goods Receipt and GR Non-Valuatedindicators among the item details on the Delivery tab page
Prerequisites
Vendor Master Record
Before you can use the invoicing plan with automatic settlement, the Evaluated Receipt Settlement Delivery indicator must be set on the Purchasing Data screen in the vendor master record.
(If you wish to enter invoicing dates manually, this is not necessary.)
Purchase Order
●     We recommend using a framework order (that is a purchase order with a validity period and a reason for rejection). The invoicing plan can adopt the validity period specified in the PO header.
●     PO items for which you wish to use an invoicing plan must have account assignment irrespective of whether a material with a master record, a material described by a short text, or an external service is involved.
●     The GR/IR control facility must be set up in such a way that no goods receipt (or, in the case of services, no service entry) is expected - only an incoming invoice. If you wish to have automatic settlement, you must also set the Evaluated Receipt Settlement indicator.
If you nevertheless wish to allow service entry sheets for the item (e.g. for information purposes only), you must set the GR Non-Val. indicator.
Customizing
Under Purchase Order à Invoicing Plan in Customizing for Purchasing, you can maintain data such as the desired invoicing plan types, date categories, and date descriptions.
Procedure
       1.      Create a purchase order with account assignment (framework order).
Click to access the item overview (or the overview of service lines if you chose item category D for services).
       2.      Enter the desired material or service, the quantity, and the price.
       3.      Select the desired item and click Account Assignments to access the account assignment screen. Enter the account assignment for this item.
       4.      Click to access the item detail screen. Check that the GR/IR control indicators are set correctly on the item detail screen.
○     The GR and GR-Based Invoice Verification or Service-Based Invoice Verification indicators must not be set.
○     IR must be set.
○     You must set ERS if you wish to have Evaluated Receipt Settlement.
○     If you wish to have service entry sheets purely for information, for example, allow non-valuated goods receipt (i.e. select the GR Non-Val and GR indicators).
       5.      Choose Item ® Invoicing Plan. A window appears, in which the invoicing plan types predefined in Customizing are suggested. Choose the desired invoicing plan type and click Continue.
You can use the following invoicing plan types:
○     Periodic Invoicing Plan
■      You use the periodic invoicing plan if the total value of the PO item is to be invoiced in each period.
■      The system creates the invoicing dates automatically on the basis of the settings in Customizing.
■      The invoicing date and the amount to be invoiced are shown for each settlement period (e.g. month). In the case of the periodic invoicing plan, the amount represents the total value of the PO item.
■      You can change the suggested dates and block individual dates for automatic invoicing if necessary.
■      You can enter the start and end dates for the invoicing plan.
■      With the Dates from and Dates to fields, you can determine that an invoicing plan does not contain invoicing dates extending over the entire validity period of the purchase order but only for a certain period within that validity period. (E.g. within a validity period from 1.1. to 12.31, only dates within the period 1.1. to 06.30.)
■      With the Horizon field, you control how far into the future dates can be created. If you enter a date rule that adds six months to the current date here, invoicing dates will be created for just half a year in advance in each case.
The system automatically creates new dates if you change the invoicing plan or when you invoke the transaction for Updating Periodic Invoicing Plans. See Generating Further Invoicing Plan Dates
■      The In Advance indicator allows you to specify whether the invoice is to be created with regard to a prior or subsequent period. (E.g. at the beginning of February, either in advance for the month of February or in arrears for the month of January).
■      In addition, fields with information on the existing invoicing plan are displayed (e.g. the calendar upon which the date determination process is based).
○     Partial Invoicing Plan
■      You use the partial invoicing plan if the total value of the PO item is to be invoiced in several partial amounts.
■      You get an empty date overview in which you can manually enter the desired dates.
■      If you work with a reference invoicing plan, the system automatically generates dates in accordance with the reference plan.
You have the following options:
●      You create a reference invoicing plan in Customizing for the invoicing plan type.
●      You enter an existing invoicing plan as reference plan directly in the invoicing plan for the PO item.
■      You can flag a date in field B (Billing/Invoicing Rule) as follows:
●      As a down payment (percentage or value)
●      As an invoicing date (percentage or value)
●      As a final invoice
       6.      Click to return to the item overview.
       7.      Click to save the purchase order item with the invoicing plan.
You can then start the automatic invoice creation process during invoice verification.
For more information, refer to the section Settlement of Amounts Due Under Invoicing Plans.
Once assigned to an item, the invoicing plan type (e.g. partial invoicing plan) cannot be changed. If you wish to assign a different invoicing plan type, you must delete the item and create a new one.
Generating Further Invoicing Plan Dates
If you have assigned a periodic invoicing plan to a PO item but have not initially defined invoicing dates covering the entire validity period of the purchase order, you can generate further dates in due course.
You have created a PO item with a periodic invoicing plan for a certain planned procurement. The purchase order is valid from 1.1. to 12.31. When creating the invoicing plan, you specified one invoicing date per month for the first half of the year. You have not yet planned any dates for the second half of the year because you do not wish information from the invoicing plan to be passed on to purchase order commitments at this stage, for example.
By mid-June, it is clear that the PO is to proceed as envisaged, and you therefore wish to schedule invoicing dates for the remainder of its validity period.
Procedure
To schedule further invoicing dates, proceed as follows:
Choose Purchase order ® Follow-on functions ® Period. invoicing plan
Specify the purchase orders for which invoicing dates are to be generated in the invoicing plan and perform the function.
A log can be created if desired.
Result
The system adds further dates on the basis of information such as the validity period or horizon from Customizing, the purchase order, and the invoicing plan.
regards,
indranil

Badi or Enhancement for Purchase order invoice plan change for ME22N

Hi ,
I have a req to have a custom tab at the header level with the push button in ME22N , By clicking the push button i need to update the invoice plan detail to all item level by using the 1st line item invoice paln entered while creating PO . I have done with adding the custom tab using MM06E005 enhancement. The problem i am facing is need to change the PO invoice plan detail for all line item. Please let me know the BADI or Enhancement to change the PO detail in the Tcode ME22N . Any Badi before save or after save with invoice plan details.
<offer removed by moderator>. Many thanks for you help!
Regards,
Vinoth.v
Edited by: Thomas Zloch on Oct 14, 2011 11:59 AM

Hi Eduardo
ME_PROCESS_PO_CUST is don'tt have the Invoice plan and ME_GUI_PO_CUST is for screen but i need the badi to get the invoice plan details and change the remaining item with the invoice plan .
Regards

Invoicing plan in SRM Purchase Orders

Hi,
Where do you set up an invoicing plan in ECC: at PO/Purchasing level or only at invoice level?
How do I create invoicing plan in SRM?
Thanks in advance!!
Sumendra

Hi ,
There is no invoicing plan PO in SRM .
thanks
Iftekhar alam

Read Invoice Plan data in BADI impl "ME_PROCESS_PO_CUST" during PO creation

Hello All,
We had implemented BADI "ME_PROCESS_PO_CUST", during the check & post methods I require to fetch the invoicing plan data for calculating the total value of purchase order. Because invoice plan is splitted just like an instalment for a period and the line item in PO is showing only one instalment, where as the ordered value of PO is the total of all instalments.
Invoice Plan data will be stored in FPLT table and the FPLNR can be fetched from EKPO.
Can any one tell me how to read the invoice plan data during the PO creation? Is there an interface & method for reading it?
Regards,
Ramesh
Edited by: Ramesh Babu Srikakollu on Apr 18, 2011 7:37 AM

Hello All,
I, myself found the solution for reading the Invoice Plan data of a Purchase Order during the creation/change. i.e. the runtime data for calculation.
Here is the solution:
Call this function module in the BADI implementation for the method CHECK or POST using the FPLNR (Invoice Plan Number), this returns the run time data of the invoice plan details during creation or change of a PO.
      data lt_fplt type table of fplt.
      CALL FUNCTION 'ML_INVOICING_SCHEDULE_READ'
        EXPORTING
          fplnr_imp = ls_opp_ekpo-fplnr
        TABLES
          xfplt     = lt_fplt.
Regards,
Ramesh

Update Infotype 1005 (Planned Compensation)

Hi,
Can anyone let me know...how to update infotype 1005 (Planned Compensation.
Transaction to create 1005 (Planned Compensation).
Thanks in advance....
Sandeep.

Hi,
You can goto tcode pp01 or pp02(Expert mode) to create the planned compensation for the job or position.
Rgds,
Balaji.

How to update the condition price in sales order while creating the invoice

Hi,
How to update the condition price in the sales order to carry out the new price while creating the invoice?
While creating the invoice it should update the condition price in sales order.
Thanks,
Balaram

No, pricing is not there in delivery.
I found an exit for VF01transaction where we can update the price in order.
Can you please tell me how to update the price if I have the order, material numbers and conditions number?
Thanks,
Balaram

How to update 'number of notes' field in UDM_SUPERVISOR in Invoices tab

I made program to create the notes using UDM_RSM_CREATE function module.
it is creating notes for selected customer and invoices and shows perfect in Notes tab, but when i see on Invoices tab there is column by the Name: Number of Notes' this is not getting updated with the counter.
Can any one please let me know how to update the number of notes column.
if there are 10 notes in notes tab for the particular Invoice then the Number notes column should show as '10'.
Please ask me if it is not clear.
Thanks,
Maheshkumar Gattu

Hi Mahesh,
I AM also trying to mass upload Notes Data and Promise to Pay data using FM "UDM_RSM_CREATE" and "FDM_P2P_CREATE" respectively from an excel file. .
1.My query in fm UDM_RSM_CREATE is from where will i get parameter i_rsm_guid ,as that cannt be generated from excel file user data.
2. My second query is once i generated case_guide via FM FDM_P2P_CREATE , its a succesfull return tat means data should appear in promise to pay but that is not happening.
3. I got a help that after successful generation of case guid from FDM_P2P_CREATE I need to use one FM for customer create contact i.e "FDM_CCT_CREATE" then only data will appear in collection management ....but I am not the parameters of this FM.
Can you guide me in it. If possible can you share ur logic if my requirement is same as your. Its very critical issue for project go live.
Thanks a lot.

How to create invoicing plan with BAPI?

Dear Experts,
      I am using this BAPI to create PO,it is ok,but I can not create invoicng plan. could you please tell me how create this po with invoicing plan?
    CALL FUNCTION 'BAPI_PO_CREATE'
      EXPORTING
        PO_HEADER                        = ITAB_PO_HEAD
        PO_HEADER_ADD_DATA               = ITAB_PO_HEAD_ADD
        HEADER_ADD_DATA_RELEVANT         = 'X'
     IMPORTING
       PURCHASEORDER                    = WF_PO_NUMBER
      TABLES
        PO_ITEMS                         = ITAB_PO_ITEM
        PO_ITEM_SCHEDULES                = ITAB_PO_ITEM_DATE
        PO_ITEM_ACCOUNT_ASSIGNMENT       = ITAB_PO_ACCOUNT
        RETURN                           = PO_RETURN
         PO_SERVICES                      = ITAB_PO_SERVICE
         PO_SRV_ACCASS_VALUES             = ITAB_PO_SERV_ACC_VAL
Best regards,
Shinny

Thank you

Urgent!! How to update Planning book and change when planning will start

Hi Gurus,
I had configured the system and we can initilize planning area every month and my question is
1. How to update planning book and change planning start date every month?
Thanks a Lot
Regards,
Raj

Hi,
In the planning book-dataview, you will assign the time bucket profile, and will be on rollling basis. if you want the forecast profile on rolling basis, maintain the forecast and history horizon as periods then that will also be on rolling basis.
Regards,
Raj

How to update PAYMENT tables manually from backend after invoice creation.

Hi,
I am Financial beginner. how to update payment details from invoices using backend in P2P.
Thanks and Regards,
Srikanth

I have created a invoice and updating payment details.
I just need small information regarding payaments.
After invoice we create payments using validate, pay in full.
But What actually happens when we do validate and pay in full.
and what are the fields and tables effected in this process.FAQ: Common Tracing Techniques in Oracle E-Business Applications 11i and R12 [ID 296559.1]
R12 Docs
http://docs.oracle.com/cd/E18727_01/index.htm
eTRM
http://etrm.oracle.com/
Thanks,
Hussein

How to update PO invoice plan?

Similar Messages

Maybe you are looking for