How to upload a large number of object states?

Hello,
We are working on a quiz/poll app and have 582 object states in one page. The file doesn’t respond while uploading and InDesign doesn’t react anymore. There are several button and sound actions inside the states. Does this mean there is a limit to the number of object states? Or does anybody know another solution to upload this document?
Cheers,
Edward van Eck

You should re-design your page to reduce (drastically) the number of object states. There's no way that many object states will render well on mobile devices with limited memory.
Neil

Similar Messages

  • TS1702 how can I remove large number of photos on my iPhone 4s from iTunes using a PC - Lenovo Think Pad - so that I can reduce the space used on the phone by 50%?

    how can I remove large number of photos on my iPhone 4s from iTunes using a PC - Lenovo Think Pad - so that I can reduce the space used on the phone by 50%?

    You don't need iTunes for that. Simply connect the iPhone to the PC where it will be recognized as a camera. You can then select the photos you wish to transfer, transfer them, and delete them.

  • How to find out the Number range object for Incident number

    How to find out the Number range object for Incident number ?
    CCIHT_IAL-IALID
    regards,
    lavanya

    HI, an example.
    data: vl_num type i,
          vl_char(6) type c,
          vl_qty type INRI-QUANTITY,
          vl_rc type INRI-RETURNCODE.
    CALL FUNCTION 'NUMBER_GET_NEXT'
      EXPORTING
        NR_RANGE_NR                   = '01'
        OBJECT                        = 'ZRG0000001'
       QUANTITY                       = '1'
      SUBOBJECT                     = ' '
      TOYEAR                        = '0000'
      IGNORE_BUFFER                 = ' '
    IMPORTING
       NUMBER                        = vl_num
       QUANTITY                      = vl_qty
       RETURNCODE                    = vl_rc
    EXCEPTIONS
       INTERVAL_NOT_FOUND            = 1
       NUMBER_RANGE_NOT_INTERN       = 2
       OBJECT_NOT_FOUND              = 3
       QUANTITY_IS_0                 = 4
       QUANTITY_IS_NOT_1             = 5
       INTERVAL_OVERFLOW             = 6
       BUFFER_OVERFLOW               = 7
       OTHERS                        = 8
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    vl_char = vl_num.
    write vl_char.
    Regard

  • How to add a large number of keywords to the e-mail filter?

    Hello.
    I would like to know how to add a large number of keywords to a filter.
    The thing I want to accomplish, is it to add around 4000 e-mail addresses to a filter list, which checks the body of incoming e-mails, which get forwarded to me.
    I don't want to outright delete them, but I would love it if it detects that the forwarded message contains one of the e-mail addresses, it would add a tag to the message.
    Is it in any way possible to make a filter like this, which doesn't slow Thunderbird down to ass-crawl speed?
    I tried to copy the whole list into the small filter tab, but It had no discernible effect on my messages, since some of the previously received ones, which I was sure contained the keywords, were not tagged. All it did was make the program super slow and I was forced to delete the filter.

    You can look at creating a exclusion crawl rule:
    http://technet.microsoft.com/en-us/library/jj219686(v=office.15).aspx
    You can also modify your content source starting addresses and remove onedrive:
    http://technet.microsoft.com/en-us/library/jj219808(v=office.15).aspx
    Blog | SharePoint Field Notes Dev Tools |
    SPFastDeploy | SPRemoteAPIExplorer

  • Trouble copying a large number of objects using Acrobat X

    Acrobat X is many times slower than Acrobat 9 when copying a large number of objects in a PDF.  What used to take one second in Acrobat 9, now takes upwards of 45 seconds or longer in Acrobat X and often causes the application to crash.  I am using 10.2.1 on OS X 10.6.8.  Has anyone else experienced this performace difference or have any solutions?  Any thoughts on the subject would be much appreciated.  Thanks.

    Since you do not want to crop your images to a square 1:1 aspect ratio changing the canvas to be square will not make your images square they will retain their Aspect Ratio and  image size will be changer to fit within your 1020 px square. There will be a border or borders on a side or two borders on opposite sides.   You do not need a script because Photoshop ships with a Plug-in script to be used in Actions.   What is good about Plugins is the support Actions.  When you record the action the plug-in during action recording records the setting you use in its dialog into  the actions step.  When the Action is played the Plug-in use the recorded setting an bypasses displaying its dialog. So the Action can be Batch.  The Action you would record would have two  Steps.   Step 1  menu File>Automate>Fit Image... in the Fit Image dialog enter 1020 in the width and height  fields.  Step 2 Canvas size enter 1020 pixels in width and height  not relative leave the anchor point centered it you want even borders on two sides set color to white in the canvas size dialog. You can batch the action.
    The above script will also work. Its squares the document then re-sizes to 1020x1020  the action re-sizes the image to fit with in an area 1020 x 1020 then add any missing canvas. The script like the action only process one image so it would also need to be batched. Record the script into and action and batch the action. As the author wrote. The script re size canvas did not specify an anchor point so the default center anchor point is uses  like the action canvas will be added to two sides.

  • How to handle a large number of query parameters for a Browse screen

    I need to implement an advanced search functionality in a browse screen for a large table.  The table has 80+ columns and therefore will have a large number of possible query parameters.  The screen will be built on a modeled query with all
    of the parameters marked as optional.  Given the large number of parameters, I am thinking that it would be better to use a separate screen to receive the parameter input from the user, rather than a Popup.  Is it possible for example to have a search
    button on the browse screen (screen a) open a new screen (screen b) that contains all of the search parameters, have the user enter the parameters they want, then click a button to send all of the parameters back to screen a where the query is executed and
    the search results are returned to the table control?  This would effectively make screen b an advanced modal window for screen a.  In addition, if the user were to execute the query, then want to change a parameter, they would need to be able to
    re-open screen b and have all of their original parameters still set.  How would you implement this, or otherwise deal with a large number of optional query parameters in the html client?  My initial thinking is to store all of the parameters in
    an object and use beforeShown/afterClosed to pass them between the screens, but I'm not quite sure how to make that work.  TIA

    Wow Josh, thanks.  I have a lot of reading to do.  What I ultimately plan to do with this (my other posts relate to this too), is have a separate screen for advanced filtering that also allows the user to save their queries if desired. 
    There is an excellent way to get at all of the query information in the Query_Executed() method.  I just put an extra Boolean parameter in the query called "SaveQuery" and when true, the Query_Executed event triggers an entry into a table with
    the query name, user name, and parameter value pairs that the user entered.  Upon revisiting the screen, I want the user to be able to select from their saved queries and load all the screen parameters (screen properties) from their selected query. 
    I almost have it working.  It may be as easy as marking all of the screen properties that are query parameters as screen parameters (not required), then passing them in from the saved query data (filtered by username, queryname, and selected
    item).  I'll post an update once I get it.  Probably will have some more questions as I go through it.  Thanks again! 

  • How to handle a large number of images?

    I am writing a program that need handle a large number of images.
    How should i do to make it work faster and less memory.
    Is it a image pool i can use ? How is it works?

    Thank you for you reply.
    I need to handle images.For example a user upload an
    image via web browser and i need save too images ,one
    is the original image ,the other is the compressed
    image.And there may be a large number of images
    because my project is a web application.
    How should i do to reduce the stress of server?Well, you can find some answers under "Image I/O" for your image related IO problems here
    http://java.sun.com/products/java-media/jai/forDevelopers/jaifaq.html.

  • Mail - how to send to large number of recipients?

    How can I send an email to a large number of recipients that I hold addresses for in a document without a) adding them to my contacts, and b) so that they can't all see each others addresses?

    I thought about using BCC, but it seems a little messy although it would do the job.
    Messy how?  That's exactly what it's for.  In fact, there's no other way to hide addresses from other recipients of the message.  The only other way to do it would be to script automated sending of one message per address, and that would get quite messy!
    What is the maximum number of recipients that Mail can handle?
    There's no limit enforced by Mail, AFAIK.  The limits come from the SMTP server you're using.
    One of the issues I had when using Outlook on Windows for this by copying and pasting from a text document, was that if there was an invalid/non-existent address in the list, it would just return an error and I was never quite sure if the whole thing didn't send, or if it was just to the dodgy address(es).
    In Mail, you'll just get a bounce message for any addresses that don't exist.  The one exception to that is addresses on the same server that you're sending from...  often, the server will simply reject the attempt to send to an address that it knows doesn't exist.  I'm not sure what kind of message the server returns in that case, though, and suspect it depends on the server.  It's been a while since I've seen such a problem.

  • Simultaneous change of properties of a large number of objects

    Hi there,
    is there a way to change the properties, especially the qualification, of a large number (>100) of objects in Universe Designer simultaneuosly?
    Or is there another effecient way to import a file that consists of only 5 dimensions and 100 measurements?
    Best regards,
    Uwe

    What exactly do you mena by Qualification ?
    Do you want to change the object definition from
    tablename.columnname
    to
    schema.tablename.columnname ?
    Regards,
    Stratos

  • How to copy very large number of files from one drive to another???

    I'm a fairly experienced Mac user for serveral years but this problem really has me stumped.
    I'm trying to copy or move 152,000 files from one external drive to another drive. I can highlight (Cmd - A) all the files on the first drive and drag them to the second drive but Finder always shows 32,768 files being copied no matter what I try.
    Any and all suggestions on how to move/copy a large number of files from one external drive to another are greatefully appreciated.
    Thank you in advance,
    Mack

    I would use the command line tool rsync.
    For instance with: rsync -av source-dir destination-dir
    -a The files are transferred in "archive" mode, which ensures that symbolic links, devices, attributes, permissions, ownerships, etc. are preserved in the transfer.
    -v Verbose, so you see the progress.
    Rsync is fast and really, really powerful and many times used in shell scripts and the like to automatically backup and/or sync stuff. Google a bit for more info.

  • How do I delete large number of email messages?

    I get a large number of emails. Is there a way to select them on my iPod Touch 32g in groups rather than one at a time when I delete many messages?

    Did you ever find a solution to this?
    I, too, would like to DELETE lots of emails at the same time, even ALL of my old emails, without having to use EDIT, then touching each email one at a time, then selecting DELETE. Painfully slow if you have 200+ emails ... this should take 5 seconds, not 10 minutes.

  • How do I delete large number of duplicates on my Itunes w/o Ctrl+Click

    I have a large number of duplicates that were loaded onto my ITunes and I would like to delete them. So far the only way I have found is to go down the list one at a time and Ctrl+Click and then delete. Since Itunes can designate duplicates, is there a function for removing all the duplicates before I synch my ipod???
      Windows XP  

    Itunes can't mass delete duplicates, but one of the forum member has written a script to do it, see:
    http://home.comcast.net/~teridon73/itunesscripts/
    If you prefer to go commercial take a look at iTsync
    http://www.itsyncsoftware.com/itsync.htm

  • How to include a large amount of objects in a package interface

    Hi guys,
    I would like to include a large amount of objects (programs, classes, etc.) in a package interface in the package builder (SE21).
    I would like to avoid inserting them one by one. Is anyone have a solution? It is not possible to use such characters has " * ". There is no documentation or help provided for this issue.
    Thank you in advance for your answers.
    Best regards,
    Sylvain

    Hello,
    I do not wish to change the package assignment of all my objects.
    I created a new package in which I created an interface to include various objects from others packages (standard and customer specific). I want to make these objects visible into my new package.
    Since I have a high quantity of objects to include in my interface, I would have like to know if there was a simple way to do this task rather than entering the name one by one in SE21.
    I hope the context is clearer now.
    Best regards,
    Sylvain

  • How to convert a large number to hex without truncating to 32-bit.

     I am trying to convert a very large number to hexadecimal (string). The number gets truncated to 32-bit, which is not what I want. For example, the number 28037546508295 (double) should be 0x198000000007. Labview truncates it and the resulting string is 0x7FFFFFFF, using Number To Hex String.vi. I am stuck. Thanks.
    Solved!
    Go to Solution.

    You can split your dbl into two 32bit integers using quotient&remainder (divide by 2^32 followed by "toU32").
    Now format each with %032x and concatenate the strings.
    Remove leading zeroes if needed.
    (Sorry, posting via phone. I can show an example later)
    LabVIEW Champion . Do more with less code and in less time .

  • Querying for large number of objects... searchspec limitation

    As part of a product i'm developing i may come across a scenario where i need to query for 100+ specific objects based on ids.
    I know the query input for WS 2.0 has a "searchspec" string field, but based on the sheer number of specific objects i need to query for i'm afraid the string may eventually get too large.
    Is there a way around this? Can i send multiple individual queries in a batch request? Can i add more than one search object to a single query page request? Anything?
    Thanks!
    -Kevin

    A few options available using the WS v2.0 Query methods:
    1. Use Arguments like page size and startrownumber arguments. This will allow you to specify the pagesize of the recordset to be returned and also the starting row number.
    2. The searchspec is a powerful argument and it supports a set of binary and unary operators. Refer the Ondemand user guide for a more complete set of operators supported by searchspec. To narrow the results of your query, you could use the "AND" operator between 2 or more fields in your object query.
    Hope this helps.
    Jaya

Maybe you are looking for