How to use 0EC_CJOB_ATTR instead of 0JOB_ATTR in 2004S ECC HR BI?
Situation:
We did some enhancement (addition of fields) to the datasource 0EC_CJOB_ATTR. All the changes made to 0EC_CJOB_ATTR appear in 0JOB_ATTR as well.
1. But when trying to extract data in /nRSA3, 0JOB_ATTR is erroring out and 0EC_CJOB_ATTR does not give any data eventhough ECC maintains some data for some particular PERNRs. Is there any suggestion on what could be the reason?
2. In the standard cubes like 0PA_C01, 0JOB is used as a characteristics. What is the process to use 0EC_CJOB instead of 0JOB so that we can use the standard cubes and associated queries without customization? Any thoughts?
Thanks
HI experts,
Any thoughts? We desparately need some direction!!!
Similar Messages
-
How to use 0EC_CJOB_ATTR instead of 0JOB_ATTR in 2004S ECC HR?
Situation:
We did some enhancement (addition of fields) to the datasource 0EC_CJOB_ATTR. All the changes made to 0EC_CJOB_ATTR appear in 0JOB_ATTR as well.
1. But when trying to extract data in /nRSA3, 0JOB_ATTR is erroring out and 0EC_CJOB_ATTR does not give any data eventhough ECC maintains some data for some particular PERNRs. Is there any suggestion on what could be the reason?
2. In the standard cubes like 0PA_C01, 0JOB is used as a characteristics. What is the process to use 0EC_CJOB instead of 0JOB so that we can use the standard cubes and associated queries without customization? Any thoughts?
Thanks
RajHI experts,
Any thoughts? We desparately need some direction!!! -
Hello experts,
I have a scenario where a new basis release was done in my development and testing SAP boxes (Basis Release 710 I believe) which means from then on when generating an ABAP Proxy class the inheriting class will be used is CL_PROXY_CLIENT as opposed to the previous CL_PROXY_BASIS.
This causes a problem though because the target date for the project, which uses this ABAP proxy, is supposed to be in the production system before the date when the basis release will be done in the production system. Obviously this will cause delays in my project since if I were to move my objects to production before the basis release a dump/syntax error will occur in production because the class CL_PROXY_CLIENT is not expected be production yet.
The next plan is to try to use CL_PROXY_BASIS instead of CL_PROXY_CLIENT, by editing my ABAP Proxy Class be force. My question is, what steps do I need to take so that I can change these classes so CL_PROXY_BASIS will be referenced/used instead of CL_PROXY_CLIENT ?
I hope to hear from all of you soon.
Regards>
Rich Heilman wrote:
> Bad idea. Your dev and prod boxes should be at the same basis level at all times.
>
Which release and SP level are you still on? -
How to use Mic instead of Line-In as audio inp
How can I configure the Mic port (pink color) as the input instead of using Line-In (blue color) on?ceati've emu0k audio processor (wdm) ?
CrystalK wrote:
How can I configure the Mic port (pink color) as the input instead of using Line-In (blue color) on ceati've emu0k audio processor (wdm) ?
Depending on software you're using (creative (surround) mixer or windows play/recording controls) you just need to un-mute the microphone source channel and set the recording device to microphone.
jutapa -
How to use icon instead of bitmap for image on button in toolbar?
Hello,
I am trying to use an image that has a transparent background on one of the buttons on our custom toolbar in Adobe Acrobat.
In the past we have been using the following code with Bitmaps to display the image and it has worked perfectly:
======================================================================
AVIcon icon = LoadBitmap(gHINSTANCE, MAKEINTRESOURCE(IDB_OPTIONS_LARGE));
toolButton = AVToolButtonNew(ASAtomFromString("IMGR:Options"), icon, true, false);
====================================================================
Background info on the other objects:
V0200_DATA* dataPtr = (V0200_DATA*) windowsData;
gHINSTANCE = dataPtr->hInstance;
Resource File:
IDB__OPTIONS_LARGE BITMAP "Resources\\ImageOptions_Large.bmp"
IDI_ICON1 ICON "Resources\\Image_Icon.ico"
Unfortunately, these bitmaps are not transparent and end up showing the white background instead of the transparent one.
I have tried using Icons and PNGs as my image but I have been unable to get anything to show up. Here is the code I am using to get the AVIcon:
===================================================================
AVIcon icon = LoadImage(gHINSTANCE, MAKEINTRESOURCE(IDI_ICON1), IMAGE_ICON, 0, 0, LR_DEFAULTSIZE);
===================================================================
However, no image appears on the toolbar. I am able to use LoadImage with the bitmap, but I am unable to make it transparent, even when using the LR_LOADTRANSPARENT flag.
If anyone can point me in the right direction I would greatly appreciate it!
Thanks,
RyanI got it worked with PNG file. I got transparent backgrounds in toolbar and menus.
below is my code,
HRSRC resource = FindResource(gHINSTANCE, MAKEINTRESOURCE(IDB_SAVE_21_PNG), L"PNG");
if( resource == NULL )
//Unable to load resource
DWORD resourceSize = SizeofResource(gHINSTANCE, resource);
HGLOBAL glob = LoadResource(gHINSTANCE, resource);
LPVOID resouceArray = LockResource(glob);
ASUns8 *data = (ASUns8*)ASmalloc(resourceSize + 1);
memcpy(data, resouceArray, resourceSize);
AVIconDataRec iconData;
iconData.dataStm = ASMemStmRdOpen(( char *)data, resourceSize);
iconData.eColorFormat = kAVIconColor;
void * iconBundle = AVAppCreateIconBundle6(kAVIconPNG, &iconData, 1);
AVToolButtonNew (ASAtomFromString("PFXDOC:Pfx_DocumentToolSave"),
iconBundle, true, false);
Thanks & Regards
Prakash -
How to use checkboxes instead of radio button in datagrid
I have a datagrid. I have two checkboxes in datagrid.That checkboxes should act like radio button.ie we can select only one checkbox at a time. If we select second checkbox,then the first selected checkbox should deselected.How to handle this scenario.Please give some code samples.
Thanks & Regards
kvpdyYou could do that, but it will be a lot easier doing it from the data model. This way you don't have to modify the behavior of the chart, it just blindly renders the data given to it. Behind the scenes you're dealing with boolean values, so it's pretty easy to write setters accomplish this.
public function set myAttribute(value:Boolean):void
setAttributesTiedTogetherToFalse();
_attrib = value; -
How to use standard print prog SAPFM06P in an ECC 6.0 environment?
Dear all,
I am working in an Upgrade proj, and I find this print prog SAPFM06P remarkably different in both the systems 4.6C & ECC 6.0. It seems the ECC 6.0 print program is configured for an Adobe form.
But the requirement I have is that of printing a custom SAP Script through either this standard print program SAPFM06P or a copy of the same. How do I go about in making this print program adaptable to calling a SAP Script instead of an Adobe form ?
Will greatly appreciate a quick response on this.
Thanks a dozen!
Aradhana.Actually there are many includes in this standard print program SAPFM06P that have been commented out by SAP in this new version ECC 6.0.
I could make it work with the configuration of the message in NACE, but my concern is whether I would be able to incorporate all the functionality that those includes have.
Do let me know your thoughts on this.
Thanks! -
How to use Crystal Reports XI in SBO 2004 ?
Hello,
I´m making an Add-on in VB .Net and need to show a report from Crystal Reports XI (a .rpt file). My Add-on is a Console Application. From what i have read from this forum the best way is to use a Windows Form (not a form from SBO) with a "Crystal Report Viewer". How is this done exactly?
1 - What refences to include in the project?
2 - How to assign to Crystal Report Viewer to the Windows Form?
3 - How do i change in VB .Net code (that is, in runtime) the datasource from the .rpt file?
Can you please give a code example.
Thank You.
Jorge LopesThanks Ibai.
My code to change DataSource is:
Try
Dim rpt As New CrystalDecisions.CrystalReports.Engine.ReportDocument
rpt.Load(strPath & RELATORIO_ORCAMENTO)
'/ Inicio
Dim rptTableLogonInfo As New CrystalDecisions.Shared.TableLogOnInfo
Dim rptConnectionInfo As New CrystalDecisions.Shared.ConnectionInfo
Dim rptTables As CrystalDecisions.CrystalReports.Engine.Tables = Nothing
Dim rptTable As CrystalDecisions.CrystalReports.Engine.Table = Nothing
With rptConnectionInfo
.ServerName = ODBC_DATASOURCE
.DatabaseName = objCompany.CompanyDB
.UserID = System.Windows.Forms.SystemInformation.UserName
End With
rptTables = rpt.Database.Tables
For Each rptTable In rptTables
rptTableLogonInfo = rptTable.LogOnInfo
rptTableLogonInfo.ConnectionInfo = rptConnectionInfo
rptTable.ApplyLogOnInfo(rptTableLogonInfo)
rptTable.Location = rptTable.Location
Next
If (rpt.Subreports.Count > 0) Then
ActualizaSubReports(rpt.Subreports, rptConnectionInfo)
End If
'/ Fim
rpt.SaveAs(rpt.FileName)
rpt.Close()
Catch ex As Exception
objApplication.MessageBox(ex.Message)
End Try
Jorge Lopes -
How to use/declare actual and formal paramters in ECC 6.0?
Experts,
I am new to ECC 6.0, and
Please help me how to pass workarea in actual parameters ( I need to use USING/CHANGING or TABLES ? please correct me ).
And in FORM logic_4_ord_status, how to declare work area and variables in formal parameters signature ???
I have declared:
TYPES : BEGIN OF ty_869_input_rec,
rec_type(2) TYPE c,
cntrl_no(50) TYPE c,
rep_flag(1) TYPE c,
edi_tr_par(16) TYPE c,
sap_cust_no(100) TYPE c,
brd_idfr(4) TYPE c,
canc_date(8) TYPE c, " Promised to ship by date
po_no(18) TYPE c,
cust_cntrt_po_no(18) TYPE c,
selection(2) TYPE c,
END OF ty_869_input_rec.
TYPES : BEGIN OF ty_870_output_rec,
rec_type(2) TYPE c,
cntrl_no(50) YPE c,
rep_flag(1) TYPE c,
edi_tr_par(16) TYPE c,
sap_cust_no TYPE vbeln_va,
brd_idfr TYPE vkorg,
po_no TYPE bstnk,
cust_cntrt_po_no TYPE bstnk,
selection(2) TYPE c,
END OF ty_870_output_rec.
Internal table declarations.
DATA : gt_869_input_rec TYPE TABLE OF ty_869_input_rec,
gt_870_output_rec TYPE TABLE OF ty_870_output_rec.
Workarea declations.
DATA : wa_869_input_rec TYPE ty_869_input_rec,
wa_870_output_rec TYPE ty_870_output_rec.
DATA : lv_order_qty TYPE wmeng,
lv_cancelled1 TYPE wmeng,
lv_cancelled2 TYPE wmeng,
lv_delivery TYPE lfimg,
lv_open_qty TYPE lfimg,
lv_neworderqty TYPE lfimg,
lv_pickedqty TYPE lfimg,
lv_unshipped_qty TYPE lfimg.
perform logic_4_ord_status
USING wa_869_INPUT_REC
lv_order_qty
lv_delivery
lv_open_qty
lv_j_3acada
lv_j_3arqda
lv_cancelled1
lv_zzactcnt
lv_zzstatus
changing wa_870_output_rec
form logic_4_ord_status
using p_wa_869_input_rec type TY_869_input_rec
p_lv_order_qty
p_lv_delivery
p_lv_open_qty
p_lv_j_3acada
p_lv_j_3arqda
p_lv_cancelled1
p_lv_zzactcnt
p_lv_zzstatus
changing p_wa_870_output_rec type TY_870_output_rec
IF p_lv_delivery LE '0'
AND p_lv_Open_Qty GT '0'
AND ( p_wa_869_input_recu2013canc_date <> p_lv_j_3acada )
AND ( p_lv_zzactcnt = 'F' OR p_lv_zzactcnt = 0 ).
p_wa_870_output_rec-shp_ord_status = 'RD' .
p_wa_870_output_rec-order_qty = p_lv_order_qty.
p_wa_870_output_rec-open_qty = p_lv_open_qty.
FOR 1st 'SC'
ELSEIF p_lv_delivery LE '0'
AND p_lv_Open_Qty GT '0'
AND ( p_lv_cancelled1 GT '0' )
AND ( p_lv_zzstatus = 'F'
OR p_lv_zzactcnt = '0' ).
I could not declare actual and formal parameters correctly .
Kindly help me.
I am getting error at p_wa_869_input_recu2013canc_date.
Please validate me ...
THANKS IN ADV.It depends on which BW environment has an RFC connection to the ECC environment you're activating the DataSource in. Typically, environments are paired, similar (but not always) like the depiction below:
ECC Development <-> BW Development
ECC QA <-> BW QA
ECC Production <-> BW Production
Best Practices suggest that a DataSource be activated and put on a transport in the ECC Development environment. Upon activation of the DataSource in ECC Development, replication of the DataSource in the BW Development environment can take place and Best Practices suggest putting the DataSource on a transport in BW. As the ECC transport is promoted throughout the ECC landscape, the BW transport is promoted throughout the BW landscape in order to keep them in sync.
So, if the envrionment that you've just activated the DataSource has an RFC connection to your BW Production environment, you can replicate in BW Production and if that's your standard practice, then that's the way your should do it. It's typically, however, not considered a Best Practice to be able to create, update or delete in a production environment. -
How to modify a lookup field-type to use checkbox instead of radiobutton?
How to modify a lookup field-type to use checkbox instead of radiobutton?
I would like to modify the behavior for the lookup field.
Normally you get a screen where it is possible to search through a lookup. The items resulted from the search are listed as radiobutton items. Therefore you can select only one at the time to be added.
Is it possible to have the items to be listed as checkbox instead? So that you can check multiple items and therefore be able to add multiple items at the time?
For example:
To add the user to 10 different groups on MS-AD.
It is desired to have the ability to check multiple groups to be added instead only one at the time.
My client would like to use this feature in many other situations.Displaying will not be a big deal but with that you have to customize the action class and its working as well.
-
How to use direct select and insert or load to speedup the process instead of cursur
Hi friends,
I have stored procedure .In SP i am using cursur to load data from Parent to several child table.
I have attached the script with this message.
And my problem is how to use direct select and insert or load to speedup the process instead of cursur.
Can any one please suggest me how to change this scripts pls.
USE [IconicMarketing]
GO
/****** Object: StoredProcedure [dbo].[SP_DMS_INVENTORY] Script Date: 3/6/2015 3:34:03 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <ARUN,NAGARAJ>
-- Create date: <11/21/2014>
-- Description: <STORED PROCEDURE FOR DMS_INVENTORY>
-- =============================================
ALTER PROCEDURE [dbo].[SP_DMS_INVENTORY]
@Specific_Date varchar(20) ,
@DealerNum Varchar(6),
@Date_Daily varchar(50)
AS
BEGIN
SET NOCOUNT ON;
--==========================================================================
-- INVENTORY_CURSUR
--==========================================================================
DECLARE
@FileType varchar(50),
@ACDealerID varchar(50),
@ClientDealerID varchar(50),
@DMSType varchar(50),
@StockNumber varchar(50),
@InventoryDate datetime ,
@StockType varchar(100),
@DMSStatus varchar(50),
@InvoicePrice numeric(18, 2),
@CostPack varchar(50),
@SalesCost numeric(18, 2),
@HoldbackAmount numeric(18, 2),
@ListPrice numeric(18, 2),
@MSRP varchar(max),
@LotLocation varchar(50),
@TagLine varchar(max),
@Certification varchar(max),
@CertificationNumber varchar(max),
@VehicleVIN varchar(50),
@VehicleYear bigint ,
@VehicleMake varchar(50),
@VehicleModel varchar(50),
@VehicleModelCode varchar(50),
@VehicleTrim varchar(50),
@VehicleSubTrimLevel varchar(max),
@Classification varchar(max),
@TypeCode varchar(100),
@VehicleMileage bigint ,
@EngineCylinderCount varchar(10) ,
@TransmissionType varchar(50),
@VehicleExteriorColor varchar(50),
@VehicleInteriorColor varchar(50),
@CreatedDate datetime ,
@LastModifiedDate datetime ,
@ModifiedFlag varchar(max),
@InteriorColorCode varchar(50),
@ExteriorColorCode varchar(50),
@PackageCode varchar(50),
@CodedCost varchar(50),
@Air varchar(100),
@OrderType varchar(max),
@AgeDays bigint ,
@OutstandingRO varchar(50),
@DlrAccessoryRetail varchar(50),
@DlrAccessoryCost varchar(max),
@DlrAccessoryDesc varchar(max),
@ModelDesc varchar(50),
@Memo1 varchar(1000),
@Memo2 varchar(max),
@Weight varchar(max),
@FloorPlan numeric(18, 2),
@Purchaser varchar(max),
@PurchasedFrom varchar(max),
@InternetPrice varchar(50),
@InventoryAcctDollar numeric(18, 2),
@VehicleType varchar(50),
@DealerAccessoryCode varchar(50),
@AllInventoryAcctDollar numeric(18, 2),
@BestPrice varchar(50),
@InStock bigint ,
@AccountingMake varchar(50),
@GasDiesel varchar(max),
@BookValue varchar(10),
@FactoryAccessoryDescription varchar(max),
@TotalReturn varchar(10),
@TotalCost varchar(10),
@SS varchar(max),
@VehicleBody varchar(max),
@StandardEquipment varchar(max),
@Account varchar(max),
@CalculatedPrice varchar(10),
@OriginalCost varchar(10),
@AccessoryCore varchar(10),
@OtherDollar varchar(10),
@PrimaryBookValue varchar(10),
@AmountDue varchar(10),
@LicenseFee varchar(10),
@ICompany varchar(max),
@InvenAcct varchar(max),
@Field23 varchar(max),
@Field24 varchar(max),
@SalesCode bigint,
@BaseRetail varchar(10),
@BaseInvAmt varchar(10),
@CommPrice varchar(10),
@Price1 varchar(10),
@Price2 varchar(10),
@StickerPrice varchar(10),
@TotInvAmt varchar(10),
@OptRetail varchar(max),
@OptInvAmt varchar(10),
@OptCost varchar(10),
@Options1 varchar(max),
@Category varchar(max),
@Description varchar(max),
@Engine varchar(max),
@ModelType varchar(max),
@FTCode varchar(max),
@Wholesale varchar(max),
@Retail varchar(max),
@Draft varchar(max),
@myerror varchar(500),
@Inventoryid int,
@errornumber int,
@errorseverity varchar(500),
@errortable varchar(50),
@errorstate int,
@errorprocedure varchar(500),
@errorline varchar(50),
@errormessage varchar(1000),
@Invt_Id int,
@flatfile_createddate datetime,
@FtpDate date,
@Inv_cur varchar(1000),
@S_Year varchar(4),
@S_Month varchar(2),
@S_Date varchar(2),
@Date_Specfic varchar(50),
@Param_list nvarchar(max),
@Daily_Date Varchar(50);
--====================================================================================
--DECLARE CURSUR FOR SPECIFIC DATE (OR) DEALER-ID WITH SPECIFIC DATE (OR) CURRENT DATE
--====================================================================================
set @Date_Specfic = Substring(@Specific_Date,1,4) +'-'+Substring(@Specific_Date,5,2)+'-'+Substring(@Specific_Date,7,2);
set @Daily_Date = SUBSTRING(@Date_Daily,14,4) + '-' + SUBSTRING(@Date_Daily,18,2)+ '-' + SUBSTRING(@date_Daily,20,2)
IF @Daily_Date IS NOT NULL
BEGIN
Delete From [dbo].[DMS_INVENTORY_DETAILS]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[DMS_INVENTORY_AMOUNT]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[ICONIC_INVENTORY_VEHICLE]
Where DMSInventoryVehicleID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[DMS_INVENTORY_VEHICLE]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[ICONIC_EQUITY_INVENTORY_COMPARE]
Where InventoryVehicleId in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[DMS_INVENTORY]
Where ID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
DECLARE Inventory_Cursor CURSOR FOR
SELECT * from [dbo].[FLATFILE_INVENTORY] where
CONVERT (date,flatfile_createddate) = CONVERT (date,GETDATE()) order by flatfile_createddate;
END
Else
BEGIN
if (@Date_Specfic IS NOT NULL AND @DealerNum != '?????')
BEGIN
Delete From [dbo].[DMS_INVENTORY_DETAILS]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[DMS_INVENTORY_AMOUNT]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[ICONIC_INVENTORY_VEHICLE]
Where DMSInventoryVehicleID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[DMS_INVENTORY_VEHICLE]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[ICONIC_EQUITY_INVENTORY_COMPARE]
Where InventoryVehicleId in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[DMS_INVENTORY]
Where ID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
DECLARE Inventory_Cursor CURSOR FOR
SELECT * from [dbo].[FLATFILE_INVENTORY] where FtpDate=@Date_Specfic AND ACDealerID='ACTEST' + @DealerNum;
END
ELSE
BEGIN
Delete From [dbo].[DMS_INVENTORY_DETAILS]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[DMS_INVENTORY_AMOUNT]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[ICONIC_INVENTORY_VEHICLE]
Where DMSInventoryVehicleID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[DMS_INVENTORY_VEHICLE]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[ICONIC_EQUITY_INVENTORY_COMPARE]
Where InventoryVehicleId in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[DMS_INVENTORY]
Where ID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
DECLARE Inventory_Cursor CURSOR FOR
SELECT * from [dbo].[FLATFILE_INVENTORY] where FtpDate=@Date_Specfic;
END
END
OPEN Inventory_Cursor
FETCH NEXT FROM Inventory_Cursor
INTO
@FileType ,
@ACDealerID ,
@ClientDealerID ,
@DMSType ,
@StockNumber ,
@InventoryDate ,
@StockType ,
@DMSStatus ,
@InvoicePrice ,
@CostPack ,
@SalesCost ,
@HoldbackAmount ,
@ListPrice ,
@MSRP ,
@LotLocation ,
@TagLine ,
@Certification ,
@CertificationNumber ,
@VehicleVIN ,
@VehicleYear ,
@VehicleMake ,
@VehicleModel ,
@VehicleModelCode ,
@VehicleTrim ,
@VehicleSubTrimLevel ,
@Classification ,
@TypeCode ,
@VehicleMileage ,
@EngineCylinderCount ,
@TransmissionType ,
@VehicleExteriorColor ,
@VehicleInteriorColor ,
@CreatedDate ,
@LastModifiedDate ,
@ModifiedFlag ,
@InteriorColorCode ,
@ExteriorColorCode ,
@PackageCode ,
@CodedCost ,
@Air ,
@OrderType ,
@AgeDays ,
@OutstandingRO ,
@DlrAccessoryRetail ,
@DlrAccessoryCost ,
@DlrAccessoryDesc ,
@ModelDesc ,
@Memo1 ,
@Memo2 ,
@Weight ,
@FloorPlan ,
@Purchaser ,
@PurchasedFrom ,
@InternetPrice ,
@InventoryAcctDollar ,
@VehicleType ,
@DealerAccessoryCode ,
@AllInventoryAcctDollar ,
@BestPrice ,
@InStock ,
@AccountingMake ,
@GasDiesel ,
@BookValue ,
@FactoryAccessoryDescription ,
@TotalReturn ,
@TotalCost ,
@SS ,
@VehicleBody ,
@StandardEquipment ,
@Account ,
@CalculatedPrice ,
@OriginalCost ,
@AccessoryCore ,
@OtherDollar ,
@PrimaryBookValue ,
@AmountDue ,
@LicenseFee ,
@ICompany ,
@InvenAcct ,
@Field23 ,
@Field24 ,
@SalesCode ,
@BaseRetail ,
@BaseInvAmt ,
@CommPrice ,
@Price1 ,
@Price2 ,
@StickerPrice ,
@TotInvAmt ,
@OptRetail ,
@OptInvAmt ,
@OptCost ,
@Options1 ,
@Category ,
@Description ,
@Engine ,
@ModelType ,
@FTCode ,
@Wholesale ,
@Retail ,
@Draft ,
@flatfile_createddate,
@FtpDate;
WHILE @@FETCH_STATUS = 0
BEGIN
--==========================================================================
-- INSERT INTO INVENTORY (PARENT TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY]
DMSDealerID,
StockNumber,
DMSType,
InventoryDate,
FtpDate
VALUES (@ClientDealerID,@StockNumber,@DMSType,@InventoryDate,@FtpDate);
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errortable = 'DMS_INVENTORY',
@errorstate = ERROR_STATE(),
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXEC [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
-- PRINT @errornumber;
-- PRINT @errorseverity;
-- PRINT @errortable;
-- PRINT @errorprocedure;
-- PRINT @errorline;
-- PRINT @errormessage;
-- PRINT @errorstate;
set @myerror = @@ERROR;
-- This -- PRINT statement -- PRINTs 'Error = 0' because
-- @@ERROR is reset in the IF statement above.
-- PRINT N'Error = ' + @myerror;
set @Inventoryid = scope_identity();
-- PRINT @Inventoryid;
--==========================================================================
-- INSERT INTO DMS_INVENTORY_DETAILS (CHILD TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY_DETAILS]
DMSInventoryID,
StockType,
DMSStatus,
LotLocation,
TagLine,
Certification,
CertificationNumber,
CreatedDate,
LastModifiedDate,
ModifiedFlag,
PackageCode,
OrderType,
AgeDays,
OutstandingRO,
Memo1,
Memo2,
Purchaser,
PurchasedFrom,
DealerAccessoryCode,
InStock,
AccountingMake,
SS,
Account,
AccessoryCore,
ICompany,
InvenAcct,
Field23,
Field24,
SalesCode,
Draft,
FTCode,
FtpDate
VALUES (
@InventoryID,
@StockType,
@DMSStatus,
@LotLocation,
@TagLine,
@Certification,
@CertificationNumber,
@CreatedDate,
@LastModifiedDate,
@ModifiedFlag,
@PackageCode,
@OrderType,
@AgeDays,
@OutstandingRO,
@Memo1,
@Memo2,
@Purchaser,
@PurchasedFrom,
@DealerAccessoryCode,
@InStock,
@AccountingMake,
@SS,
@Account,
@AccessoryCore,
@ICompany,
@InvenAcct,
@Field23,
@Field24,
@SalesCode,
@Draft,
@FTCode,
@FtpDate
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errorstate = ERROR_STATE(),
@errortable = 'DMS_INVENTORY_DETAILS',
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXECUTE [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
--==========================================================================
-- INSERT INTO DMS_INVENTORY_AMOUNT (CHILD TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY_AMOUNT]
DMSInventoryID,
AllInventoryAcctDollar,
OtherDollar,
PrimaryBookValue,
AmountDue,
LicenseFee,
CalculatedPrice,
OriginalCost,
BookValue,
TotalReturn,
TotalCost,
DlrAccessoryRetail,
DlrAccessoryCost,
DlrAccessoryDesc,
InternetPrice,
InventoryAcctDollar,
BestPrice,
Weight,
FloorPlan,
CodedCost,
InvoicePrice,
CostPack,
SalesCost,
HoldbackAmount,
ListPrice,
MSRP,
BaseRetail,
BaseInvAmt,
CommPrice,
Price1,
Price2,
StickerPrice,
TotInvAmt,
OptRetail,
OptInvAmt,
OptCost,
Wholesale,
Retail,
FtpDate
VALUES (
@InventoryID,
@AllInventoryAcctDollar,
@OtherDollar,
@PrimaryBookValue,
@AmountDue,
@LicenseFee,
@CalculatedPrice,
@OriginalCost,
@BookValue,
@TotalReturn,
@TotalCost,
@DlrAccessoryRetail,
@DlrAccessoryCost,
@DlrAccessoryDesc,
@InternetPrice,
@InventoryAcctDollar,
@BestPrice,
@Weight,
@FloorPlan,
@CodedCost,
@InvoicePrice,
@CostPack,
@SalesCost,
@HoldbackAmount,
@ListPrice,
@MSRP,
@BaseRetail,
@BaseInvAmt,
@CommPrice,
@Price1,
@Price2,
@StickerPrice,
@TotInvAmt,
@OptRetail,
@OptInvAmt,
@OptCost,
@Wholesale,
@Retail,
@FtpDate
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errortable = 'DMS_INVENTORY_AMOUNT',
@errorstate = ERROR_STATE(),
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXEC [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
--==========================================================================
-- INSERT INTO DMS_INVENTORY_VEHICLE (CHILD TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY_VEHICLE]
DMSInventoryID,
InteriorColorCode,
ExteriorColorCode,
Air,
ModelDesc,
VehicleType,
VehicleVIN,
VehicleYear,
VehicleMake,
VehicleModel,
VehicleModelCode,
VehicleTrim,
VehicleSubTrimLevel,
Classification,
TypeCode,
VehicleMileage,
FtpDate,
EngineCylinderCount
VALUES (
@InventoryID,
@InteriorColorCode,
@ExteriorColorCode,
@Air,
@ModelDesc,
@VehicleType,
@VehicleVIN,
@VehicleYear,
@VehicleMake,
@VehicleModel,
@VehicleModelCode,
@VehicleTrim,
@VehicleSubTrimLevel,
@Classification,
@TypeCode,
@VehicleMileage,
@FtpDate,
@EngineCylinderCount
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errortable = 'DMS_INVENTORY_VEHICLE',
@errorstate = ERROR_STATE(),
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXEC [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
--==========================================================================
-- MOVE CURSUR TO NEXT RECORD
--==========================================================================
FETCH NEXT FROM Inventory_Cursor
INTO @FileType ,
@ACDealerID ,
@ClientDealerID ,
@DMSType ,
@StockNumber ,
@InventoryDate ,
@StockType ,
@DMSStatus ,
@InvoicePrice ,
@CostPack ,
@SalesCost ,
@HoldbackAmount ,
@ListPrice ,
@MSRP ,
@LotLocation ,
@TagLine ,
@Certification ,
@CertificationNumber ,
@VehicleVIN ,
@VehicleYear ,
@VehicleMake ,
@VehicleModel ,
@VehicleModelCode ,
@VehicleTrim ,
@VehicleSubTrimLevel ,
@Classification ,
@TypeCode ,
@VehicleMileage ,
@EngineCylinderCount ,
@TransmissionType ,
@VehicleExteriorColor ,
@VehicleInteriorColor ,
@CreatedDate ,
@LastModifiedDate ,
@ModifiedFlag ,
@InteriorColorCode ,
@ExteriorColorCode ,
@PackageCode ,
@CodedCost ,
@Air ,
@OrderType ,
@AgeDays ,
@OutstandingRO ,
@DlrAccessoryRetail ,
@DlrAccessoryCost ,
@DlrAccessoryDesc ,
@ModelDesc ,
@Memo1 ,
@Memo2 ,
@Weight ,
@FloorPlan ,
@Purchaser ,
@PurchasedFrom ,
@InternetPrice ,
@InventoryAcctDollar ,
@VehicleType ,
@DealerAccessoryCode ,
@AllInventoryAcctDollar ,
@BestPrice ,
@InStock ,
@AccountingMake ,
@GasDiesel ,
@BookValue ,
@FactoryAccessoryDescription ,
@TotalReturn ,
@TotalCost ,
@SS ,
@VehicleBody ,
@StandardEquipment ,
@Account ,
@CalculatedPrice ,
@OriginalCost ,
@AccessoryCore ,
@OtherDollar ,
@PrimaryBookValue ,
@AmountDue ,
@LicenseFee ,
@ICompany ,
@InvenAcct ,
@Field23 ,
@Field24 ,
@SalesCode ,
@BaseRetail ,
@BaseInvAmt ,
@CommPrice ,
@Price1 ,
@Price2 ,
@StickerPrice ,
@TotInvAmt ,
@OptRetail ,
@OptInvAmt ,
@OptCost ,
@Options1 ,
@Category ,
@Description ,
@Engine ,
@ModelType ,
@FTCode ,
@Wholesale ,
@Retail ,
@Draft ,
@flatfile_createddate,
@FtpDate;
END
CLOSE Inventory_Cursor;
DEALLOCATE Inventory_Cursor;
SET ANSI_PADDING OFF
END
Arunraj KumarThank you.
And another question if the data is already there in the child table if i try to load alone it must delete the old data in the child tablee and need to get load the new data and
How to do this ?
Arunraj Kumar
You can do that with an IF EXISTS condition
IF EXISTS (SELECT 1
FROM YourChildTable c
INNER JOIn @temptable t
ON c.Bkey1 = t.Bkey1
AND c.Bkey2 = t.Bkey2
DELETE t
FROM YourChildTable c
INNER JOIn @temptable t
ON c.Bkey1 = t.Bkey1
AND c.Bkey2 = t.Bkey2
INSERT INTO YourChildTable
where Bkey1,Bkey2 etc forms the business key of the table
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page -
The program doest enterpret my figures from the text file in the correct way since the numbers contain dots instead of commas. Is there a way to fix this in labVIEW, or do I have to change the files before reading them in the program? Thanks beforehend!
You must go in the labview option menu, you can select 'use the local
separator' in the front side submenu (LV6i).
If you use the "From Exponential/Fract/Eng" vi, you are able to select this
opton (with a boolean) without changing the labview parameters.
(sorry for my english)
Lange Jerome
FRANCE
"Nina" a ecrit dans le message news:
[email protected]..
> I would like to read a text file in which the decimal numbers are
> using dots instead of commas. Is there a way of converting this in
> labVIEW, or how can I get the program to enterpret the figures in the
> correct way?
>
> The program doest enterpret my figures from the text file in the
> correct way since the numbers contain dots instea
d of commas. Is there
> a way to fix this in labVIEW, or do I have to change the files before
> reading them in the program? Thanks beforehend! -
Hi All,
I am new to TestStand. Still in the process of learning it.
What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?
Thanks in advance,
LaVIEWan
Solved!
Go to Solution.Hi,
Using the Parameters is the correct method to pass data into and out of a sub sequence. You assign your data to be passed into or out of a Sequence when you are in the Edit Sequence Call dialog and in the Sequence Parameter list.
Regards
Ray Farmer -
How to use a bluetooth dongle instead of built-in BT?
Just got an "Ultra Long Range Industrial" bluetooth dongle (BTD Bluetooth Dongle BT-6610). I want to use it instead of the built-in bluetooth because it has a much longer range.
How do I disable the built in bluetooth and enable the BT-6610?
The dongle shows up:
USB Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0aa7
PCI Revision ID: 0x00b1
PCI Vendor ID: 0x10de
Bus Number: 0x06
Bolutek BTD-6610:
Product ID: 0x0001
Vendor ID: 0x0a12 (Cambridge Silicon Radio Ltd.)
Version: 59.41
Speed: Up to 12 Mb/sec
Manufacturer: Bolutek Technology Co.,Ltd.
Location ID: 0x06200000
Current Available (mA): 500
Current Required (mA): 200
BRCM2046 Hub:
Product ID: 0x4500
Vendor ID: 0x0a5c (Broadcom Corp.)
Version: 1.00
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0x06100000
Current Available (mA): 500
Current Required (mA): 0
Bluetooth USB Host Controller:
Product ID: 0x8217
Vendor ID: 0x05ac (Apple Inc.)
Version: 1.80
Serial Number: xxxxxxxxx
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0x06110000
Current Available (mA): 500
Current Required (mA): 0
Here are my bluetooth setting:
Apple Bluetooth Software Version: 2.4.0f1
Hardware Settings:
Address: xx-xx-xx-xx-xx-xx
Manufacturer: Cambridge Silicon Radio
Name: billbarnes
Firmware Version: 5941
Bluetooth Power: On
Discoverable: No
Vendor ID: 0
Product ID: 0x1
HCI Version: 4 (0x4)
HCI Revision: 5941 (0x1735)
LMP Version: 4 (0x4)
LMP Subversion: 5941 (0x1735)
Device Type (Major): Computer
Device Type (Complete): Macintosh Portable
Composite Class Of Device: 3670284 (0x38010c)
Device Class (Major): 1 (0x1)
Device Class (Minor): 3 (0x3)
Service Class: 448 (0x1c0)
Requires Authentication: No
Services:
Bluetooth File Transfer:
Folder other devices can browse: ~/Public
Requires Authentication: Yes
State: Enabled
Bluetooth File Exchange:
Folder for accepted items: ~/Downloads
Requires Authentication: Yes
When other items are accepted: Ask
When PIM items are accepted: Ask
When receiving items: Prompt for each file
State: Enabled
Devices (Paired, Favorites, etc)
Manufacturer: Cambridge Silicon Radio (0x3, 0x10db)
Incoming Serial Ports:
Serial Port 1:
Name: Bluetooth-PDA-Sync
RFCOMM Channel: 3
Requires Authentication: No
Outgoing Serial Ports:
Serial Port 1:
Address:
Name: Bluetooth-Modem
RFCOMM Channel: 0
Requires Authentication: NoHi X42:
Your last paragraph intrigued me as I had the same impression:
I thought unlicensed BT devices were legally limited by the FCC to about 30 feet (3 meters)
Actually, 30 feet is 10 meters.
Anyway, I researched and found this as part of a Wikipedia item:
Bluetooth is a standard wire-replacement communications protocol primarily designed for low power consumption, with a short range (power-class-dependent, but effective ranges vary in practice; see table below) based on low-cost transceiver microchips in each device.[7] Because the devices use a radio (broadcast) communications system, they do not have to be in visual line of sight of each other, however a quasi optical wireless path must be viable.[2]
Class
Maximum Permitted Power
Range
(approximate)
mW
dBm
Class 1
100
20
~100 meters
Class 2
2.5
4
~10 meters
Class 3
1
0
~5 meter
The effective range varies due to propagation conditions, material coverage, production sample variations, antenna configurations and battery conditions. In most cases the effective range of class 2 devices is extended if they connect to a class 1 transceiver, compared to a pure class 2 network. This is accomplished by the higher sensitivity and transmission power of Class 1 devices.[8]
Apparently there are BT devices that will transmit about 300 feet. I did look at the FCC site, but quickly became confused in the technbabble.
Barry -
Need a shortcut to "Allow pages to choose their own colors, instead of my selections above option preference" I know where it is and how to use it but I have to go through 7 mouse clicks to change it, then a few minutes later change it back. I also know the sequnce is alt t, alt o, alt c, alt a, then ok, ok. Got to be a way to make a one key short cut for this. I use a black background to reduce eye strain, but about 10% of the webpage I go to can't be send with black so I have to go into tools and hit 6 or 7 things to chnage it then after through with webpage have to do it all over at Not allow webpages to have own color. Very very cumbersome.
== This happened ==
A few times a week
== made that wayhttps://addons.mozilla.org/en-US/firefox/addon/toggledocumentcolors-198916/
The above addon will solve your problem.
Shortcut to toggle user color/page color :- Ctr+Shift+C
Maybe you are looking for
-
Read only / save problem when multiple user accessing PDF
When accessing a PDF-file from a network location (where multiple users might have the file open simultaneously) I have noticed a problem. First of all you will not get notified when opening the file that it is open elsewhere, there is no "read only"
-
A lot of my songs, once put on the iCloud, will not download to my iPod. They are in my iTunes library, already downloaded, but will not appear in my library on my iPod. There is no common thread for the origin of the songs--many were ripped from C
-
Is there a way that you can convert a pdf file into a InDesign 5.5 file
I want to convert a pdf file into a InDesign CS5.5. Is there anyway you can do this, or is there any software which can be downloaded that achieves good results.
-
I am unable to install flash 9 on my intel mac. I have deleted firefox and its preferences. I have closed google desktop but still get the access denied message. Does anyone have any suggestions?
-
Photoshop CC export layers to files without prefix
Can anyone help with this?