How to use 2 Dropdown box in webapplication for date range selection

Dear all,
I am working on a report that will show 2 drop down boxes. These should be used as a date range.
This works fine if I use 2 variables as a date range on 0CALYEAR. However I dont want the user to fill in the dates but selecting the dates with 2 drop down boxes.
I cannot manage to get this to work. I saw some comments about user exits in the forum but I cannot figure it out if there is an easier way.
Could you give me an idea of what to do?
Thanks a lot,
Andreas

Hi,
If you want the user to select the date directly rather than entering, you need not to have a dropdown menu in WAD. Directly go to the query which you have selected for the object in WAD, there create a variable with calendar. Put it mandatory, so that the user selection of the date will be mandatory. The variable will be automatically be available when you execute the template inn the browser.
Assign points if this helps u.
Regards,
Koundinya.

Similar Messages

  • How to use the same variable value for data entry and the planning sequence

    Hi,
    the scenario is the following:
    Using the WAD template a user enters cost center plan data. The cost center is selected by the chosen value for the variable "V1".
    Afterwards he shall push a button which starts a planning sequence (including saving the data and further functions). This planning sequence uses a filter that also contains the variable "V1".
    What or where has it to be defined that the planning sequence uses automatically the same value for the variable "V1" as selected for the data entry?

    You have to define in the planning function. The planning sequence is only a sequence and it read the planning functions underneath it.
    Ravi Thothadri

  • Drop Down Box for Date Range Selection

    I have multiple queries on the same worksheet with different variables for each.  To simplify changing the one consistent variable, the date range, I have added a drop down box tied to all infoproviders in the query.  This would work if I wanted to select a single date but I cannot determiine how to select a date range (01/2010 - 12/2010).  Any ideas on how I might accomplish this?  I am using Netweaver 7.1.

    You can use two single-input variables: one for DATE FROM and the other for DATE TO and use them in query definition to restrict the date (restriction type: Range between DATE FROM and DATE TO).
    Then you create two dropdown boxes, one for each variable.
    Regards,
    Dorota

  • How to use check box in flash 8?

    How to use check box in flash 8?

    If you want it to happen when someone clicks the checkbox, then you need to add a listener for that event.
    var cbListener:Object = new Object();
    cbListener.click = function (evt:Object) {
        if (cb.selected) {
              gotoAndStop(2);
    cb.addEventListener("click", cbListener);
    (Note: "cb" and "cbListener" are names that were made up for this example.  They could be anything you want to name them)

  • How to use input box LOV in query panel (search region)

    Hi,
    We are having JDeveloper version 11.1.2.4.0
    In one of the JSF page, we are showing some data (absences).
    Requirement is to add search region at the top so that user can filter the data, based on search parameters like Business Group, Job etc.
    The search parameters are inter-dependent e.g. Job is dependent on Business Group. So when user selects some particular Business Group, Job search field should show jobs for that Business Group only.
    This works fine we use Choice List for both Business Group and Job.
    However since there are huge number of jobs, Job choice list makes page rendering very slow.
    So we tried to use Input box with LOV for Job.
    But now when job is selected in the LOV popup and returned to main page, job search field shows job id instead of job name.
    Please note that our base VO (AbsencesVO) contains JobId attribute. We have added List of Values on JobId, which fetches Job Name through JobVO1 view accessor.
    How to make Job LOV field show selected Job Name instead of ID? Kindly advise.
    Thanks,
    Vivek

    Thanks Timo/Bangaram, for prompt replies
    Timo, the link mentioned by you talks about showing IDs (DepartmentId, ManagerId etc.) in the search region. I need to show names in the form of Input box LOV.
    Bangaram, as per your suggestion I tried using transient JobName attribute. However now when I select any value in the Job LOV popup and return to main page, it shows first Job Name in the Job Name search field.
    Also when I click 'Search' button in Search panel, it shows error - Attempt to set a parameter name that does not occur in the SQL: BindJobName
    Please note that I have added both JobName and JobId in the List configuration as you suggested.
    In View criteria, I have removed previous item (condition) on JobId and added condition on JobName.(This is required because JobId condition shows JobId search field)
    I also tried making JobName dependent on JobId..still same behaviour.
    Kindly advise.
    Thanks,
    Vivek

  • How to use the same POWL query for multiple users

    Hello,
    I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
    "Query 'ABC' is already open in another session."
    where 'ABC' is the query name.
    Can you please tell me how to use the same POWL query for multiple users ?
    A fast reply would be highly appreciated.
    Thanks and Regards,
    Sandhya

    Batch processing usually involves using actions you have recorded.  In Action you can insert Path that can be used during processing documents.  Path have some size so you may want to only process document that have the same size.  Look in the Actions Palette fly-out menu for insert path.  It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

  • How to use the same services-config for the local and remote servers.

    My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
    <?xml version="1.0" encoding="UTF-8"?>
    <services-config>
        <services>
            <service id="amfphp-flashremoting-service"
                class="flex.messaging.services.RemotingService"
                messageTypes="flex.messaging.messages.RemotingMessage">
                <destination id="amfphp">
                    <channels>
                        <channel ref="my-amfphp"/>
                    </channels>
                    <properties>
                        <source>*</source>
                    </properties>
                </destination>
            </service>
        </services>
        <channels>
        <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
            <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
        </channel-definition>
        </channels>
    </services-config>
    I think the problem  is the line
            <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    but I'm not sure how to use the same services-config for the local and remote servers.

    paul.williams wrote:
    You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
    The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
    Hi Paul,
    In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
    -services=path/to/services-config.xml
    IF
    services-config.xml
    have tokens in it and user have not specified additional
    -context-root
    and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
    Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
    for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
    -services=path/to/services-config.xml
    have been specified durring compilation.
    I dont know any better way to exmplain this, but in summary there is two places that you can tell swf  about service confogiration,
    1) pass -services=path/to/services-config.xml  parameter to compiler this way you tell swf file up front about all that good stuff,
    or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

  • How to use the same email address for outgoing email on two iPads?

    How to use the same email address for outgoing email on two iPads?.   My wife and I both use the same email address.  We receive the same incoming email on both iPads but are unable to send email from my wife's iPad.  She is using an iPad 2 and is usng IOS 6.0.1

    Hi Creaturekeeper,
    If you've added the account into the iPad and you are unable to send email from it, then please follow the troubleshooting in the article below.
    Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
    Take care,
    Alex H.

  • How to use the field of 'FM for Determining Address' in report RSWUWFML2?

    Dear gurus,
    In the selection screen of report RSWUWFML2, there is a field named 'FM for Determining Address' . How to use it? Is it for sending e-mail to specific e-mail addresses?
    Regards
    David

    I will test soon. Thanks to all involved.

  • WSUS 3.2 work on Win2008 R2, how to use it deploy MS patch for Win 2012 ?

    WSUS 3.2 work on Win2008 R2, how to use it deploy MS patch for Win 2012 ?
    I have installed KB2734608, but when I search MS13-101 , no patch for Win 2012.
    Can you help me resolve this problem ?
    Thanks

    On Thu, 10 Apr 2014 06:01:48 +0000, fujitsu08 wrote:
    WSUS 3.2 work on Win2008 R2, how to use it deploy MS patch for Win 2012 ?
    WSUS has its own, dedicated forum where the WSUS experts answer questions.
    You should repost your question here:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverwsus
    Paul Adare - FIM CM MVP
    Aibohphobia: n. Fear of Palindromes

  • How to create dropdown box, radio button,check box in wad

    Hi,
    How to create dropdown box, radio button,check box in wad.
    Thanks,
    cheta.

    Cheta,
    This are all standard Web Items in the WAD. Drag them onto your template and then make the changes you need to them in their Properties.
    Regards
    Gill

  • How to use find my iPhone app for windows pc

    How to use find my iPhone app for windows pc ... Is it possible to do..
    Or what is the closest app to do that.,,,,,

    iPhone User Guide (For iOS 5.0 Software)
    iCloud: Find My iPhone
    iCloud: Find My iPhone overview
    iCloud: Set up Find My iPhone

  • How to use 'DELETE ADJACENT DUPLICATES FROM' for deleting as some field

    How to use 'DELETE ADJACENT DUPLICATES FROM' for deleting as some field
    eg:
    I have a inner table ,it contains a field named ast_guid,now,I search ten records,contains some duplicate records in the field of ast_guid.but I can not delete the duplicate records as ast_guid.

    If the type of  inner table is standard table,  you should sort the inner table  by the fields before user 'DELETE ADJACENT DUPLICATES  ', and use COMPARING addtion.
    Edited by: Justin on Jun 28, 2009 9:48 AM

  • SMP3 - AppDevelopment (Agentry):how to use GCM (Google cloud Messaging) for Agentry Application.

    Hi, I have a question on SMP3 and AppDevelopment (Agentry): how to use GCM (Google cloud Messaging) for Agentry Application for PUSH notification

    Pratik,
    Let me walk you through the flow with the assumption that the user is on an Android device and "connected" to the Agentry server.
    An emergency workorder is created in SAP and assigned to the technician. 
    The SAP backend system will notify the Agentry server via an XML message that there is a workorder to send.
    Agentry will get the details and if the user is connected attempt to send the workorder to the device via the Push mechanism
    If the push fails to reach the Agentry client, the Agentry server will send a GCM message to the user
    When the user returns to the Agentry client, the normal push processing / fetch will occur to receive the workorder from the server assuming the push retrys are in effect.
    So, essentially you should not have to do anything to get the GCM to work as a secondary notification mechanism.
    If you are looking to do something else with GCM that would be outside of Agentry.
    --Bill

  • How to use Replacement Path Variables to perform Date Calculations

    Hi Experts,
    Can anyone make me clear about:How to use Replacement Path Variables to perform Date Calculations???????
    Thankyou in advance..
    shankar

    In left panel select the time Dimension
    Then hit new variable in that
    give the Name and Description for the Variable
    In processing by hit Replacement Path
    In reference characterisitcs use Calendar Day...
    As ur intention is to use it for Date
    Then in adjacent tab use
    Replace variable with Query / Variable
    Then u can use Offset length and offset start for controoling the display of your variable.
    Use as single, multiple single, interval, selection option as uwish
    HIt okey
    and you are good to go

Maybe you are looking for

  • Windows 2008 Server and Windows 8 clients

    Hey Guys, I have had this problem for sometime now and really need a solution. I have Windows 2008 Enterprise Server running about 200+ terminal services clients. All Windows XP clients are fine, Windows 7 clients have issues when they get an updated

  • How do I use the print function to output a numeric variable with a fixed amount of leading zeroes

    I need to create an output from a T-SQL query that picks a numeric variable and uses the print function to output with leading zeroes if it is less than three characters long when converted to string.  For example if the variable is 12 the output sho

  • How do I delete credit card info

    Its says I have to many credit cards on this account? How do I get rid of that!

  • SBLIVE 5.1 : dts drops using spdif under zoomplayer and recl

    Hello there... I really need a big help. I'm usign a personnale HT PC done with athlon 2800 XP, gforce 5200 and SBLIVE 5.. I plugged SBLIVE using spdif out connector to my sherwood R-945 ( DTS, DD, DPL ... ). Everything works fine under Dolby Digital

  • In operator and subquery

    I have created a sql query for oracle rdbms. I am passing a particular id in the subquery of my main query . I have one major difference in the query whenever i use a subquery with IN operator and using IN_list values in IN operator. I found that whe