How to use 2 transformator in a single application?

Hi,
We have an application which uses jars from many vendors, one jar needs to use Saxon.jar, another needs to use platform default transformer instance.
We are able to set only one in javax.xml.transform.TransformerFactory property.
Please help!
Regards,
Aparajith

I tried to use like this. i did not know what is the platform default instance.
try {
             System.setProperty("javax.xml.transform.TransformerFactory ",
                       "org.apache.xalan.processor.TransformerFactoryImpl");
            TransformerFactory transFactory = TransformerFactory.newInstance();
            Transformer transformer = transFactory.newTransformer();
             //TransformerFactoryImpl transFactory = new TransformerFactoryImpl();
             //Transformer transformer = transFactory.newTransformer();
            DOMSource dSource = new DOMSource(node);
            StringWriter sw = new StringWriter();
            StreamResult sr = new StreamResult(sw);
            transformer.transform(dSource, sr);
            StringWriter anotherSW = (StringWriter) sr.getWriter();
            StringBuffer sBuffer = anotherSW.getBuffer();
            processedXML = sBuffer.toString();
        } catch (Exception ex) {
             ex.printStackTrace();
             throw new Exception(" Failed to convert XML to string.:: "+ex);
        return processedXML;Thank you for your responses.
Regards,
Aparajith

Similar Messages

  • How to use the transformation matrix in Placed Suite.

    I am in trouble how to use the transformation matrix Placed Art (PlacedSuite ). 
           AIRealMatrix rasterMatrix;
    AIRealMatrix placedMatrix;
    if (artType == kRasterArt {
         error = sAIRaster-> GetRasterMatrix (art, & rasterMatrix);
    } else if ((artType == kPlacedArt) {
         error = sAIPlaced-> GetPlacedMatrix (art, & placedMatrix);
    When I converted to using the transformation matrix of PlacedArt, the target art could not be converted to expect.
    I could convert in case of the RasterArt. (The reference point of the transformation matrix of RasterArt is (0,0).) 
    In the PlacedArt, preference point is not (0,0)?
    The tx/ty of the transformation matrix of PlacedArt is not correct? 
    In the transformation matrix of RasterArt and Placed Art, how are those two different?

    The short answer is "no", (0, 0) is not the origin of placed art (unlike kRasterArt). Off the top of my head, I believe when you place art, its original state is upside-down and flipped horizontally in the upper-right of the artboard. If you want to see where it starts, simply create an identity matrix and apply that as the matrix for the kPlacedArt and you'll see how it starts. Yes, its pretty crazy.
    minimum99 posted some code that might help. I haven't tried it (I rolled my own years ago) but I'd give it a whirl:
    http://forums.adobe.com/message/3195790#3195790

  • How to use Mulitple DAQs with a single triggered event on only one of the DAQs

    I have three PXI6115 and would like to tie all these to a single triggered event on one of the DAQs. I've scaned the examples and any assistance would be greatly appreciated....

    TCjr,
    Please refer to your other post:
    How to use Multiple DAQs with a single triggered event on only one of the DAQs

  • How to use multiple tape drive for single filesystem on single client.

    Hello All.
    I want to backup single filesystem with multiple tape drive.
    Incase of Symantec veritas netbackup "NEW_STREAM" for multi-stream backup.
    Backup client has a  single backup filesystem like /data1  directory with 4 LTO6 drives.
    /data1 directory doesn't have a sub-direcotry, just present a files.
    If /data1 directory has a sub-directory like /data1/aaa, /data1/bbb, /data1/ccc , Is it possible to use multiple drives?
    Please anybody answer the questions.
    Thanks advanced.

    See how to use multiple tape drive from single client when I want to backup single filesystem?

  • How to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0)

    Hi all,
    I'd like to know if it's possible and how to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0), Windows version.
    With the following code, I can see that the mail.jar used by the server is the one included in the jdk installation :
    // I'm testing InternetAddress.class because I want to use commons-email-1.2.jar that requires mail.jar 1.4 (or higher) and activation.jar 1.1 (or higher)
    // and I know that inside the commons-email-1.2.jar file, I need to call the InternetAddress.validate() method that throws a java.lang.NoSuchMethodError: javax.mail.internet.InternetAddress.validate()V if it is used with mail.jar 1.2.
    Class cls = javax.mail.internet.InternetAddress.class;
    java.security.ProtectionDomain pDomain = cls.getProtectionDomain();
    java.security.CodeSource cSource = pDomain.getCodeSource();
    java.net.URL location = cSource.getLocation();
    System.out.println(location.toString());
    This code returns : file:/C:/oracle/app/jdk/jre/lib/ext/mail.jar and this mail.jar file has an implementation version number: 1.2
    - I've tried to include my own mail.jar (1.4.2) and activation.jar (1.1.1) files in the war file that I deploy, but it doesn't work (the server still uses the same mail.jar 1.2)
    - I've tried to put the mail.jar (1.4.2) and activation.jar (1.1.1) files in the applib directory of my OC4J instance, but it doesn't work (the server still uses the same mail.jar 1.2)
    - I know that a patch exists : I've read the following document: How to Make Libraries such as mail.jar and activation.jar Swappable ? [ID 552432.1]
    This article talks about the Patch 6514136, but this patch only applies to : Oracle Containers for J2EE - Version: 10.1.3.3.0
    Can you please help me ?
    Thanks in advance for your answers,
    Laurent

    I strongly suggest to upgrade to AS 10.1.3 to get this.
    Think of future support of AS 9.0.4. You will get not critical patch updates anymore.
    --olaf                                                                                                                                                                                                                                                                                                               

  • How to use debug my jdevloper devloped jsp applications using tomcat 4.0?

    hello,
    how to use debug my jdevloper devloped jsp applications using tomcat 4.0?
    how to run with using tomcat path with browser?
    can any one help?
    thanks
    pullareddy

    Hi Pullareddy,
    Charles' answer will work for Servlets in Tomcat, but debugging JSPs is a bit more complicated than debugging Servlets.
    Here's what you need to do:
    (I don't have Tomcat, so I don't know the details of Tomcat configuration files and I can't guarentee that Tomcat provides the flexibility so that you can configure it for debugging JSPs. Each application server is configured a bit differently. Hopefully you can adjust the following instructions to Tomcat.)
    1. You need to replace Tomcat's JSP engine with OJSP and you need to setup debugging parameters for OJSP.
    This is not specifically in the JDev documentation, but you may be able to apply the information found in the topic "Remote Debugging in OC4J".
    Here are some tips:
    A. You'll probably need to specify the following jars in some Tomcat config file: ojsp.jar, ojsputil.jar, xmlparserv2.jar, ojc.jar, and jdev-rt.jar.
    B. The OJSP class name is oracle.jsp.runtimev2.JspServlet.
    C. The debug parameters are:
    debug_mode = true
    developer_mode = true
    encode_to_java = true
    emit_debuginfo = true
    jspjavacompiler = oracle.jdevimpl.jsp.JspOjcCompiler
    2. You need to make Tomcat start the Java command with debugging options. (This is what Charles was talking about. One of the debug options is -XXdebug). This is in the JDev documentation in the topic "Starting a Java Process in Debug Mode". Please read that documentation help topic.
    3. You need to delete any old .java or .class files which were created in the past for your JSP. If you leave old .java or .class files around, then the debugger may not be able to stop at breakpoints in your JSPs. So, be sure to clean up old files.
    4. Set your project settings for remote debugging. This is on the Debugger - Remote panel in the Project Settings dialog box. You probably want either Attach to OJVM or Attach to JPDA. Which radio button you choose depends on what command line options you specified in step 2.
    -Liz

  • How to use execute query For a single record

    Hi All,
    I am working with oracle forms 10g, I have developed a custom form.
    I the form user enter some data and click save in the menu and data get inserted into my table. Inside the insert statement i have hardcoded some values, Once data get inserted i cant able to see that values immediately in my text fields in my form.After requerying i can able to see the changes.
    For example I have a text field called Status, and the field is display only field. At that time of insert i have hardcoded as "INCOMPLETE". Once the user enter the data in the form and click save the data get inserted in to my table but i cant able to see the status, after i requery my form i can able to see the status.
    Here i do multi insert also.
    This is my insert statement
    BEGIN
    First_Record;
    LOOP
    IF :BANK_GUARANTEE_BLK.CHECK_IN_OUT = 'Y'
    THEN
    XXBANK_GUARANTEE_HEADERS.XXBANK_GUARANTEE_INSERT;(this is my package, here i have written my insert statement)
    --Execute_query;
    END IF;
    Exit when :System.Last_Record = 'TRUE';
    Next_Record;
    END LOOP;
    END;
    If user insert only one row and i gave Execute_query to refresh and bring the current data, but when i use execute_query Its brings up all the datas in the table.
    Can any one tell me how to avoid this and how to use execute_query for a single record.
    Thanks &regards
    Srikkanth

    Solved,
    The solution is
    set_block_property('LC_REQ_BLK',ONETIME_WHERE,'LC_PO_NUMBER='||:LC_REQ_BLK.LC_PO_NUMBER);
    go_block('LC_REQ_BLK');
    execute_query;
    Works fine.
    Regards
    Sri

  • How to use multiple hierarchies for a single char in single query

    Hi,
    Is there any way that we can use multiple hierarchies for a single char in single query. I tried and it just allows me to select one hierarchy even if I use hierarchy variable.
    I have a requirement where user wants to see information related to a cost center with different cost center groups in different hierarchies (every year has different cost center group hierarchies).
    Suppose I want to see information related to a cost center from year 2001-2004.in these four year cost center may have been associated to different groups depending upon that year hierarchy. How can I do that?
    Thanks
    Jona

    Nope. Now way to do this.
    There is always just one hierarchy assigned to a characteristic. And even if the hierarchy was time dependent, it only reads it for one key date and not according to transaction data.
    Regards,
    Beat

  • How to use the transformation file

    Hello there!
    This message is to ask a question that maybe it could be familiar to you. I want to load data using a .txt file and a transformation file using the import package. Suppose  that the structure of my txt file is:
    Entity,Category,Time,Account1,Account2,Account3
    Ent1,Actual,2010.JAN,289.23,32.43,123.34
    Ent1,Actual,2010.JAN,289.23,32.43,123.34
    Ent1,Actual,2010.JAN,289.23,32.43,123.34
    How could I load this values using a transformation? I know that there exists an option named *MVAL(), but if I use the following syntax in mapping section it doesnu2019t work:
    Account=*MVAL(4:6)
    I read something about accountval, does some boddy knows how to use it?
    Thanks in advance
    regards

    Hi,
    If you are using MVAL statement, then you need to maintain a conversion file also. Its compulsory. Please make sure that you have maintained a conversion file.
    If you are on 7.5 MS, then the statement will work. Please refer to the MVAL statement in the mapping section of the below link
    http://help.sap.com/saphelp_bpc75/helpdata/en/a2/e722bc58404335ada8592cdc8feaca/content.htm
    However, in 7.0 MS, the MVAL works only if the multiple key figures are corresponding to the time dimension. In your case, they correspond to the account dimension. You need to create separate transformation file for each of the key figures and then upload the flat file separately using each of the transformation files.
    Hope this helps.

  • How to use joiner transformation for 3 sources?

    Hi,
    I want to use joiner transformation to join my 3 source tables (t1, t2, t3).
    When I look at the joiner transformation it only has INGRP1 and INGRP2 for two sources. How do I use it for third source for joining? I dont see INGRP3 so that I could drag my third source in to the joiner.
    Regards,
    Billu

    Can also break the join down into a number of joins which has advantage sometime if part of the join can be reused or you want to (in 11gR2) use different data movement technology for that set of operators. There are 2 illustrations here one with 2 joiners for 3 tables the other with one joiner which has 3 groups;
    !http://blogs.oracle.com/warehousebuilder/owb_join_expressivity.jpg!
    Cheers
    David

  • How to use multiple tape drive from single client when I want to backup single filesystem?

    Hello All.
    I want to backup 1 filesystem using 4 tape drives for reducing backup time.
    In case of symantec veritas netbackup, they can user "NEW_STREAM" for multi-streaming backup.
    Please anybody let me know that how to do use multiple tape drive for single client.
    1. Backup Source server : Linux (1 client)
    2. Backup Soucre :      /data1  (500GB)
        -> Current directory structure doesn't have sub directory under /data1, just files present under /data1
    If direcotry struceture has a sub-direcotry like( /data1/aaa, /data1/bbb ), Is it availble to use multiple tape drives?
    3. Tape Drive with OSB : LTO6 * 4 drives
    Thank you.

    You would have to create a different dataset for each sub-folder. If you only have files at the top level folder then even the NEW_STREAM option couldn't be used to split the job.
    Organise it into folders and then create datasets in a client folder such as :
    /usr/local/oracle/backup/admin/config/dataset/Linux/data1_aaa
    /usr/local/oracle/backup/admin/config/dataset/Linux/data1_bbb
    Then in the schedule you just specify the Linux folder. In each dataset you list the hostname and the folder name, such as :
    include host Linux
    include path /data1/aaa
    Now it will create a new job for each dataset and therefore each folder.
    Thanks
    Rich

  • How to use a transformer xml to html

    hi
    I want to develop jsp pages based on xml data, so to construct components with xml data i must use a transformer converting xml to htm. so if there is a better or more generic solution of classes or examples that can help me , i tried to use cocoon but the problem was to use it within a jsp page.
    please to mail me your suggestions or solutions .
    thank you

    Review Xalan/Xerces from the Apache project.
    http://xml.apache.org/xalan-j/index.html
    http://xml.apache.org/xalan-j/usagepatterns.html#servlet
    http://xml.apache.org/xalan-j/samples.html
    Just one method...

  • How to use the same component in different applications

    Hi All,
    I need to use the same component in different applications. i.e In opportunity, Quotation & Promotion.
    The Search help view in the component PRD01QR should be used in all these components but with different search criteria.
    With help of the DO_determine_configuration, different view configurations are possible but Different search criteria is not possible.
    for Eg. search parameter without DDLB, F4 options in another components.
    How can I control the behavior of the search view in different applications with restricting the field properties?
    Is it possible to find out where and in which component these search_help_search component is used?

    Hi Harry,
    Is it possible to find out where and in which component these search_help_search component is used?
    ans: I am giving an Example for your question go through that u might get clear about this.
    Ex: BT115IT_SLSO  sales order component
    below screen they component usage using for populate the product search component.
    please let me know any help required .
    Regards,
    vishwa.

  • How to Use Mobile Service in HTML/JavaScript Application

    The Windows Azure Mobile Service is a back end tool for mobile applications. It supports various platforms, such as Windows Store, Windows Phone 8, iOS and Android. The Windows Azure
    Mobile service can also support HTML/JavaScript. This article helps you to get a basic idea of how to use the Windows Azure Mobile Service in HTML/JavaScript applications.
    Let us start with a Quick startup project provided by Microsoft. A Quick startup is a simple demo project that can help us to understand how to use the Windows Azure Mobile Service with HTML/JavaScript. So let's start from the Quick startup project.
    Login into in the Windows Azure portal and use the following procedure.
    This article assumes you already have a Windows Azure account and the mobile service is enabled in your account.
    1. Create a new Windows Azure Mobile Service
    Click on the +New button from the left corner and select Compute -> Mobile Service and then click on the "Create" button.
    The Windows Azure portal popup creates a mobile service wizard when you click the Create button. Windows Azure asks you to enter the mobile service name as shown in the following image:
    Select the database options and region for your mobile service and click on the "Next" button.
    Once your mobile service is successfully created, the portal will show all your mobile services as shown in the following images.
    Ok! We have created a new mobile service successfully. Let's move to our subsequent steps.
    1. Quick startup Project 
    As we all know, the Windows Azure Mobile Service can support many platforms such as Windows Store, Windows Phone 8, iOS, Android and HTML/JavaScript. This article only tells us about the new HTML/JavaScript platform that is recently added to the Windows Azure
    Mobile Service.
    In the image above, we are in the quick startup page where the Windows Azure Mobile Service allows the user to choose their platform. I have selected the HTML/JavaScript Platform.
    In the image above, we found 3 quick steps that can allow us to run <g class="gr_ gr_74 gr-alert gr_gramm Grammar" data-gr-id="74" id="74">a HTML/JavaScript</g> sample project. 
    1. Create Table: In this step the user needs to create a table that can used by the sample project, once you hit the create TodoItem Table button. The Portal will create a TodoItem table in your mobile service. You
    can check this table by clicking on the data tab(menu).
    2. Download and run your app: In this step the user needs to download the Quick startup project that is provided by the Windows Azure portal. Click on the "Download" button and download the project. You will
    see the following files in the quick startup project.
    The Server folder contains some files to setup this project locally. The user should run the file from the server folder corresponding to their OS. I am using Windows OS so I ran the <g class="gr_ gr_80 gr-alert gr_spell ContextualSpelling ins-del multiReplace"
    data-gr-id="80" id="80">lanch</g>-<g class="gr_ gr_79 gr-alert gr_spell ContextualSpelling ins-del multiReplace" data-gr-id="79" id="79">windwos</g> file to setup this project locally in
    IISExpress.
    Press r and enter the key, you will see IISExpress started. Do not close this Windows and open your browser and request the http://localhost:8000/ page.
    Enter the Item name and click on the add button. Your Item will be added to the TodoItem table.
    3. Configure your host name: This step is a very important step for any HTML/JavaScript application that uses the Windows Azure Mobile Service. In this <g class="gr_ gr_83 gr-alert gr_gramm Punctuation only-ins
    replaceWithoutSep" data-gr-id="83" id="83">step</g> the user must register their website name in the Cross-origin resource sharing (CORS). By default, "localhost" is added by the Windows Azure Mobile Service
    so your quick startup project can run without making any CORS setting changes. The user can add their website domain name by clicking on the configure tab (menu).
    The user can add as many website domain names as needed.

    are you asking a question or did you just post a tutorial here? you might want to post it as a blog post or wiki entry instead.

  • How to use bapi /external service directly in application service

    Hi
    I have to use BAPI_ALM--RDER_MAINTAIN in my caf application
    i have imported it as external service.As there are problems mapping its input fields to entity service , it has to be consumed directly vai application service.
    But i ahve never done so before.Can someone give me an example as to how t do it.
    If someone can give example of how to code in the application service to call  the bapi , it would be great . as i have some time constraint.
    Thanks ,
    Points assured for help.

    Hi Vivek,
    As you asked for an example to call a bapi directly from Application Service you can follow this link.
    <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/44/57fff3b10b3672e10000000a114a6b/frameset.htm">Using Generated External Proxy in Application Service</a>
    Thanks and Regards
    Avijit

Maybe you are looking for

  • Problem on the configuration about creating an SPN for your CMS on a Window

    I have some problem on the configuration about creating an SPN for your CMS on a Windows 2003 domain My Environment: Domain Controller and AD Server :SV01 Crystal Report Server: SV07 Domain Name: SVG.NTT.LOCAL I created a domain user "BOUSER" in SV01

  • Objectclass for change documents for contracts using condition record no.

    I want the changes for price, Price per and currency for contract based on the info record number and contion record number. Presently i am using object class is COND_A. But if user changes  multiple times price, price per and currency by deleting ex

  • Apple-ID at Ipad

    Hi, Hope someone can help me. Had some trouble with my Apple-ID over the weekend. Couldn't log in anymore. That problem is solved now, changed my Apple-ID and my password. At the moment I can log in at iTunes at my PC, but can't log in at iTunes on m

  • Buffering

    hi to all abap gurus my querry is as  follows  what is buffer ? and when do we buffer the table ? how do we  decide wether the table has tio be buffered or not ? we know that all bufeering types 1 full buffering , 2. single record buffering .3.generi

  • Black screen flickering Safari

    Why is my macbook pro screen is black. I turned on Safari by using cntrl command when i turned it on. now safari is flickering and the rainbow ball continues to spin