How to use a 'Percentofsum' function with a group selection

Hi All!
I have created a report using CR XI in which I select on certain records in a database and then further select on those records using a group selection. The displayed records in the subgroup are correct. I sum these totals of the grouping using a formula (Basically 3 formulas, one for Reset, another for the calculation, and the third for the display) since if I just use the 'built in' summary function it will still total all records that were selected before the group selection. My dilemma is that I need to get a percentage of the subtotal based on the total of that grouping. Below is an example of the layout of the report:
                                                                            __Dept %_            Program Bugt             Prgm % of Dept Bud              Cost of %_
GH#1    ADMIN                                                        100%
GF#2    LEGAL                                                                                448694                          4.22%                                 12382
GF#2    CITY MGR                                                                               445414                          4.19%                                 12294
GF#2    CITY CLERK                                                                           113075                          1.06%                                  3110
GF#2    COM PROMO                                                                          391657                         3.69%                                  10827
GF#2   CENTRAL                                                                               1430570                         13.46%                                 39492
GF#1                                                                      293406                 2829410                                                                      78105
The "2829410" is the Display formula I used to accurately calculate the listed program budget numbers. The 3 formulas I used to get that number is a Reset formula (whileprintingrecords;Numbervar W := 0;) located in GH#1, a Calculation formula (whileprintingrecords;Numbervar W := w + Sum ({@Next Year Budget Amount}, {gl_master.a_org}); ) located in GF#2, and a Display formula (whileprintingrecords;Numbervar W;W) located in GF#1. The percentages that currently display in the "Prgm % of Dept Bud" are wrong as they use the 'built in' PercentofSum function when you right click on the filed in the details section and select summary as a percentage of. I need a formula that would do the following calculation: 448694/2829410 = 15.85% and thus the "Cost of %" formula that would do the following calculation: 293406*.1585 = 12382.
I tried using a similar "Reset", "Calculation", and "Display" formulas but I cannot get to work correctly. Any help would be greatly appreciated.
Thanks!
P.S. The reason I am using a group selection is because it is easier than listing out all the accounts (departments) that I do not want in the report and that selection could change from time to time where as what is in the group selection would never change.
Sorry for long winded explanation.

Read all about it.
You'd probably have to write a little wrapper (using JNI) that passes
parameters and return values around between your C function and
the JVM.
kind regards,
Jos

Similar Messages

How to use xsl document() function with LiveCycle XSLT processor

Hello,
I would like to use LiveCycle XSLT processor to merge xml documents by using the xsl document() function.
However, I have not, yet, found clear reference information on the specifics of how to accomplish in LC. For instance if you have
a transformation that does merging using a standalone xml editor (such as Oxygen), than what is required to accomplish the same
using the LiveCycle XSLT service. How do you specify the URI of the XML document that is specified as an input in the xsl document() function. Your insight is appreciated. Regards

Hello Steve,
I checked the reference that you cited (XSLT Transformation). The reference omits discussing how to use xlst document() function within a stylesheet. I think that probably means that feature of xslt technology is not directly available through LiveCycle. When I find a workaround, I'll post an update...for the user community that might encounter the same issue. Thank you for your response and insight. Regards, jb1809

How to use video capture function with Ti4200-VTD8X card?

I have installed nVIDIA Capture Driver provided by MSI (come with VGA card), but don't know how to use this function, do I need to run a third party program or simething else? I couldn't find any document or information in MSI site talking about this function: "Capture the image through the video input port on the card". Please help, Thanks in advance.

Try Ulead Video Studio or check your card's bundled software.Intervideo WinProducer anywhere?
Check your card's manual for proper connections :D

How to use the sharing function with other pc on the Finder sidebar?

I discver my housemates' pc's names under "sharing" on the Finder sidebar. We all use the same wifi network at home. Neither they nor I have enabled anything so I'm just wondering what is that for and where am I able to control sharing options?
Also I can even access their iTunes libraries. How do these all work? Am I able to set any security options at all?

On the doc page (this is also in the download package),
http://download.oracle.com/docs/cd/E17277_02/html/index.html
see:
Getting Started Guide
Java Collections Tutorial
Direct Persistence Layer (DPL)
All of these describe how to use data types other than byte arrays.
--mark

How to hide/show reports region with radio group selections

Hi, I have an HTML region with a radio group of two choices (Rpt1 and Rpt2). Also got two other report regions which depend on the radio group selections and by pressing a button it will display records.
Everything does work perfect BUT say I select Rpt1 and press the report button it will show the records and after that if I select the Rpt2 radio button I still see the result of Rpt1 records. How can I clear or hide the reports regions when I change my radio button selection?
Thank you
-iahmadi

Hi,
You can create HTML regions that do not need to contain anything at all (use the "No Template" region template to ensure that you don't see a region Title on the page).
However, in order to get this region to be displayed until the Report button is clicked, you would need to have a hidden page item (called, say, P1_SHOW_REPORT) that has, as a default, 0 as a value. The branch that is triggered by the Report button would then set this item to 1 - so, 0 = hide and 1 = show
On your page you should have a branch that is conditional on the Report button being clicked. On this branch, set the first "Set these items" to P1_SHOW_REPORT and "With these values" to *1*. You should also have a branch on the page that is unconditional - meaning that it can be triggered by anything that submits the page. Firstly, this branch should have a high Sequence Number (say, 99) and secondly, should should set the value of P1_SHOW_REPORT to *0*. So the Report button sets it to 1 and anything else (which will include the radio button selections) will reset it to 0.
Now, on your regions you have to change the conditions slightly as we now have two conditions to check - which report has been selected and whether or not the Report button has been clicked.
This can be done by using a SQL Exists condition of something like:
SELECT 1 FROM DUAL WHERE :P1_SHOW_REPORT = 1 AND :P1_RADIO = 'ABC'(where ABC is the value for the radio button for the report
The "blank" region would also have a condition - that would be a simple Item = Expression 1 condition of P1_SHOW_REPORT = 0
Andy

How to use ora:parseEscapedXML() Function with String Content

Hello,
I am receiving a ResponseMessage that returns a string, but the content of the string is actually XML. I have tried to use the ora:parseEscapedXML() function to parses the string (see XML Fragment below) to return structured XML data that can be assigned to typed BPEL variables. The documentation is very limited for this (I've looked in the Developer Guide draft that is available at the OraBPEL site).
2 customer records from XML literal fragment copied from string result:
<?xml version="1.0" encoding="ISO-8859-1"?>
<recordset>
<customer>
<CustNum>AROUT</CustNum>
<CustLName>Hardy</CustLName>
<CustFname>Thomas</CustFname>
<CustEmail>[email protected]</CustEmail>
<CustAddress>120 Hanover Sq.</CustAddress>
<CustCity>London</CustCity>
<CustRegion></CustRegion>
<CustPostalCode>WA1 1DP</CustPostalCode>
<CustCountry>UK</CustCountry>
</customer>
<customer>
<CustNum>BSBEV</CustNum>
<CustLName>Ashworth</CustLName>
<CustFname>Victoria</CustFname>
<CustEmail>Victoria.Ashworth@B's.com</CustEmail>
<CustAddress>Fauntleroy Circus</CustAddress>
<CustCity>London</CustCity>
<CustRegion></CustRegion>
<CustPostalCode>EC2 5NT</CustPostalCode>
<CustCountry>UK</CustCountry>
</customer>
The copy rule for assigning CustNum to accountnumber that fails:
<copy>
<from expression="ora:parseEscapedXML(bpws:getVariableData('DataService_OutputVariable','invokeSpecMsgReturn','/recordset/customer/CustNum'))"/>
<to variable="outputVariable" part="payload" query="/client:QueryResult/client:customer/client:accountNumber"/>
</copy>
Any help would be greatly appreciated.
Thanks,
Sean

Hello,
I am attempting to provide more information in order to hopefully get some better guidance here.
1) The BPEL process I built receives input from a client that is one of city name or region name or postal code or country name and returns a list of customer records with their AccountNumber, LastName, FirstName, Email, Address, City, Region, PostalCode and Country. The BPEL flow invokes a packaged integration Web Service that retuns the records in a string whose content is XML (see XML fragment below).
2) The string content returned is vaiable based on the input (i.e. city name="London")
Two customer records from XML literal fragment copied from string result:
<?xml version="1.0" encoding="ISO-8859-1"?>
<recordset>
<customer>
<CustNum>AROUT</CustNum>
<CustLName>Hardy</CustLName>
<CustFname>Thomas</CustFname>
<CustEmail>[email protected]</CustEmail>
<CustAddress>120 Hanover Sq.</CustAddress>
<CustCity>London</CustCity>
<CustRegion></CustRegion>
<CustPostalCode>WA1 1DP</CustPostalCode>
<CustCountry>UK</CustCountry>
</customer>
<customer>
<CustNum>BSBEV</CustNum>
<CustLName>Ashworth</CustLName>
<CustFname>Victoria</CustFname>
<CustEmail>Victoria.Ashworth@B's.com</CustEmail>
<CustAddress>Fauntleroy Circus</CustAddress>
<CustCity>London</CustCity>
<CustRegion></CustRegion>
<CustPostalCode>EC2 5NT</CustPostalCode>
<CustCountry>UK</CustCountry>
</customer>
I want to <assign> each record from the packaged integration service result (the string whose content is XML) to a complexType variable defined within the BPEL Process WSDL (see example below).
XML fragment from BPEL WSDL:
<element name="QueryResult" type="client:recordType"/>>
<complexType name="recordType">
<sequence>
<element name="customer" type="client:customerType" maxOccurs="unbounded"/>
</sequence>
</complexType>
<complexType name="customerType">
<sequence>
<element name="accountNumber" type="string"/>
<element name="lastName" type="string"/>
<element name="firstName" type="string"/>
<element name="email" type="string"/>
<element name="address" type="string"/>
<element name="city" type="string"/>
<element name="region" type="string"/>
<element name="postalcode" type="string"/>
<element name="country" type="string"/>
</sequence>
</complexType>
I have read through the tutorial and reviwed the XPath Funtion example in the reference (C:\OraBPELPM_1\integration\bpelpm\orabpel\samples\references\XPathFunction), but I am stsill very unclear as to how to handle this. I would appreciate any and all help.
Thanks,
Sean

How to use elapsed time function with state machine in Lab VIEW

Hello
I've been trying to use state machine with elapsed time function in order to sequentially start and stop my code. The arrangement is to start the code for 1 minute then stop for 5 minutes. I've attached the code, the problem is when I place the elapsed time function out of the while loop it doesn't work, on the other hand when I place it inside the loop it does work but it doesn't give the true signal to move to the next state.
Could you please have a look to my code and help me to solve this issue.
Regards
Rajab
Solved!
Go to Solution.
Attachments:
daq assistance thermocouple(sate machine raj).vi ‏436 KB

Rajab84 wrote:
Thanks apok for your help
even with pressing start it keeps running on wait case
could you please explain the code for me, the use of Boolean crossing, increment , and equal functions
Best Regards
Rajab
OK..I modded the example to stop after 2 cycles. Also recommend taking the free online LabVIEW tutorials.
run vi. case statement goes to "initialize", shift registers are initialized to their constants. goto "wait"
"start"= false, stay in current state. If true, transition to "1 min" case
reset elapsed timer with True from shift register(counter starts at zero)."time has elapsed"=false, stay in current state(1 min). If true, goto "5min" case
reset elapsed timer with True from shift register of previous case(counter starts at zero)."time has elapsed"=false, stay in current state(5 min). If true, goto "1min" case. Also, bool crossing is looking for "true-false" from "5 min" compare function to add cycle count.
Once cycle count reaches 2, stop while loop....
Attachments:
Untitled%202[1].vi ‏42 KB

How to use a @PRIOR function with a SubVar in a cross dim formula?

Hi all,
I have a pretty basic logic to calculate a member:
Rate = Account1->Entity->Prior Forecast Year / (Account2->Entity->Prior Forecast Year + Account3->Entity->Prior Forecast Year);
We have a SubVar for the Current Forecast Year, so in my formula I wanted to use @PRIOR(&CurFstYr)
I got an error message: expected type [MEMBER] found [NUMBER] ([@PRIOR]) in function []
The calc validates and runs with no errors if I use &CurFstYr only, which gives me the option to create a Prior Forecast Year subvar: &PriorFstYr. Is this my only option?
I've also tried using SUMRANGE function. The formula validated for @PRIOR(&CurFstYr). Eventhough the calc script validated, the calc stopped after 3 seconds with the below error message:
Error executing formula for [Rate] (line 0): invalid object type
Any idea why the SUMRANGE calc failed to run? Also, once again, is my only option to create a new SubVar for the Prior Forecast Year?
Thanks,
Mehmet
Edited by: Mehmet Sevinc on Mar 2, 2012 12:14 PM
Edited by: Mehmet Sevinc on Mar 2, 2012 12:29 PM

You have this:
Rate = Account1->Entity->Prior Forecast Year / (Account2->Entity->Prior Forecast Year + Account3->Entity->Prior Forecast Year);I don't have Essbase fired up, but I wonder if this would work:
Rate = @PRIOR(Account1->Entity->&CurFstYr, 1, "Years") / (@PRIOR(Account2->Entity->&CurFstYr, 1, "Years") + @PRIOR(Account3->Entity->&CurFstYr, 1, "Years")) ;You can put a cross dim into a @PRIOR statement, but you will need to specify the dimension unless it's whatever is tagged as Time. My guess is Years is not the Time dimension.
I'll bet the @PRIOR doesn't make things fast.
Regards,
Cameron Lackpour
Edited by: CL on Mar 2, 2012 6:26 PM
Forgot the first @PRIOR

How to use SQL String functions with JPA and SAP NW

Hi Everyone,
I'm recently got the following problem:
I have a Web Service project using JPA. But as i found out SAPs JPA implementation or more precisely openSQL restricts the use of the LOWER() function, which converts a String to lower case.
Now I am looking for some sort of workaround. I want to execute the following JPQL query:
SELECT bp FROM BusinessPartner bp WHERE LOWER(bp.companyName) LIKE LOWER(:companyName)
I assume there is somewhere a flag to disable this restrictions, because there might be cases, like mine, where this standard functions are needed.
Kind Regards,
Carl

Hi Vladimir,
no it's not the same issue, because I am asking for a solution for this problem. There have to be ways to bypass this. Otherwise you can't use JPA properly. This is too much of a restriction!
Is there no possibility to change to another implementation than openSQL?
Regards,
Carl
Edited by: Carl Simon Heckmann on Feb 2, 2009 2:26 PM

How to use the set functions effectively in webi ,please let me know with detail

how to use the set functions effectively in webi ,please let me know with detail

Hi,
we use use set functions on heirarchies with aggregate functions mostly .
If you include member_set, Min returns the minimum value of the aggregated data for all members in the member set.
Member_set can include multiple sets separated by semicolons (;).
The list of member sets must be enclosed in {}.
If the member set expression does not specify a precise member or node, the hierarchy referenced must be present in the table, then the member set expression references the current member in the hierarchy in the table. If the hierarchy is not in the table, the function returns the message #MULTIVALUE.
Eg .
1)     Ancestor
=Sum([YTD] ; {Ancestor([Test Hierarchy];2)})
2)     IsLeaf
=[Test Hierarchy].IsLeaf
You can use this function when you want to show your Measure only at lower level .
3)     .Depth
=[Test Hierarchy].Depth
This is also function used with hierarchy to find Level of Members .
Follow this link for PDF reference .
Page 147
https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&ved=0CDIQFjAB&url=https%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2Fboexir4%2Fen%2Fxi4sp5_ffc_en.pdf&ei=nBAUU-iUM4WWrAeMuoCoDg&usg=AFQjCNHakXsEjd_yUk2y3lVdibf3PXpEOA&bvm=bv.61965928,d.bmk
search on SCN this question was discussed before also one those links .
http://scn.sap.com/thread/3183380
Hope this will help you .

I have transefer function like (1/(s^2+s+5)) and i have a square wave input , i want to use this transfer function with this input to see the output , how can i do that , with example please.

i need to know also how to represent this transfer function in labview, try to send me example. answer me at my mail

"st" wrote:
> answer me at my mail
give a valid e-mail first, and your name, we don't like to help anonymous
people
> try to send me example.
how much do you pay ?
> i have transefer function like (1/(s^2+s+5)) and i have a square wave
> input , i want to use this transfer function with this input to see
> the output , how can i do that
First you have to know what you are doing, like an engineer : you have a
Laplace, continuous time transfer function but LabView handles discrete
signals only. Use matlab/simulink if you want to simulate continuous time
systems easily...
If you definitely want to use LabView, the first step is to discretize your
continuous-time transfer function, i.e. decide a sampling rate and convert
it to a "z transfor
m". Then you can directly use the "IIR Filter.vi" as I
said earlier.
Philippe Guglielmetti - www.dynabits.com me at my mail

How do i lock all fields without using the signature function with adobe lifecycle designer 9

How do i lock all fields without using the signature function with adobe lifecycle designer 9 ...
I want it to have the same affect as when a signature is used but not use that function. I want a button that says lock all fields. And then you can click it again to unlock all fields...
Thanks

Here you go!
LOCK the form once its SAVEd?

Does anyone know how to use the bcc functionality for apple mail while accessing it on the cloud from my PC?

I am currently away from my MAC and want to send an email through apple mail with the bcc functionality. I am using the cloud to get to my mail, however, I can't figure out how to use the BCC functionality, please help. Thanks!

Open your mail,
lower left corner click on settings,
go to composing and check BCC, save and your done

How to Use the language function for assignment and validation

Hi All,
If anyone can explain me in details with example ,how to use the language function for assignments and validations?
Thanks
Arnab

Hi Arnab,
The expression is checked only for the current MDM session.
If u login with the ABC language it will always show the ABC language no matter how many times u execute it.
Try connecting to the DM with the XYZ language.
It should go to the if part rather than else.
Hope it helps.
Thanks,
Minaz

How to use the CMS functionality in Sun Portal Server 7.2

Hi All,
How to use the CMS functionality using the ccd.war(Portlet) which is available in the library as i could add it to my channel but not able to show the functionality as it is showing the error msg "You are currently not logged in. Please login." should I create userid and there respective roles inorder to use the CMS functionality.
Has any one used this as I could this in glass fish server.
Any Input is appreciated.
Thanks & regards
Srikanth

Have a look at the "*Roles*" section of the portal server 7.2 content management system guide
http://docs.sun.com/source/820-4275/index.html . You can also look at [project mirage|https://mirage.dev.java.net] for some screencasts
Alternatively,
1. ccd.war has 3 portlets in it:
(a) custom content definition portlet
(b) custom content portlet
(c) workflow portlet
2. Inorder to work with these portlets, user needs to be in anyone of the below roles:
(a)Consumer (b) Editor (c) Approver (d) Administrator (e) Submitter (f) Contributor (g) Publisher
3. By default ccd.war gets deployed using a default roles file (/var/opt/SUNWportal/tmp/ccd.roles.properties)
Note: In windows, you may not find this file
4. Access the portlets as a user in any of the role mentioned in the ccd.roles.properties
(OR)
you can use a new roles file which has mapping to your custom roles. For this , undeploy existing ccd.war and deploy again with a new roles.properties file
Hope this helps!

How to use a 'Percentofsum' function with a group selection

Similar Messages

Maybe you are looking for