How to use an event that is created in a component of different DC?

Hello Experts,
I have two DCs(development components) in WD java, and
1) Created an event (say <sendvalues>) which is having two parameter values in interface controller of one DC1
2) In another DC2, I need to retrieve the values stored in <sendvalues>,
    For that I have created a method (say <getvalues_IC>)of type "eventhandler" in view controller.
    Also I have mapped the view with Interfacecontroller of DC1.
  Could you please suggest how to get the values in <sendvalues>, since I could not able to revoke the event in DC2.
Thanks,
Suri

Hi Suri,
Please refer to [DC Communcation|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60132577-7801-2b10-c9b1-b13b2f78f23b?quicklink=index&overridelayout=true]
Call the interface controller event method from other DC interface controller.
Hope it will helps
Regards
Arun Jaiswal

Similar Messages

  • How to use a excel file to create a service component?

    Dear all,
       I want to use a excel file to create a service to be my data source. I used the wizard to do that but i always got a message. "The data format is not valid, fields in each record must be delimited by tab charactors, and each record seperated by new line charactors". How should I reformat my excel file to fit the requirements? I have already chang the field`s format into 'text' type. Thx ^^

    Hi Louis,
    [Here|http://img125.imageshack.us/my.php?image=exceltestlo7.jpg] is the result of your data.  I downloaded your excel sheet and created a simulated service in 7.1.1 and it works fine.
    Below are the steps:
    1. Go to Tools -> service component wizard
    2. The popup opens : Step1 :  Enter the name of your service component
    3. Go to Excel spreadsheet Copy the data for which the service needs to be created.
    4. Step 2 : Paste the copied Excel data in the popup
    5. Step 3 : Define Input -> just click next
    6. Step 4: Define Conditions -> just click finish.
    Let me know if it helps.
    Good Luck,
    Dharmi

  • Add a note to a Calendar event that was created from Mac Mail

    When I create a Calendar event by clicking on a date within a Mac Mail message (you hover over a date in an email it draws a dashed box around the date and gives an option to create a Calendar event).  It creates an Event in my Calendar with the following fields:  Subject, Location, Date Time and alert fields, Invitees and a link to the mail message.  But - I can't seem to add a Note Field.  The only work-around seems to be to manually create a new calendar entry.
    Does anyone know how to modify an event created from Mac Mail to add a Note Field?
    iMac Retina 5K 27-inch Late 2014, OS X Yosemite Version 10.10.3, Calendar Version 8.0 (2034.9), Mail  Version 8.2 (2098).

    Thanks Brett for replying, but this doesn't work if the event is created by Mac Mail - which is my issue.  Sure it works with any other event but not one that has been created from within Mail.  If this is a bug I'm sure the Calendar people point the blame at the Mail people and vice versa but that doesn't help me.  But before I submit a report to Apple I thought I would see if I might be missing something obvious.
    See the attached screenshot of an event that was created by Mac Mail. There is no Add Notes field when the event is Double Clicked, Right Clicked or any other form of click.
    Graeme.

  • How to use an existing form to create a new one

    How do I use a form that I created as a template for a new similar form?

    Just create a duplicate by clicking the Duplicate button:

  • I'm trying to learn how to use Xcode. I've create a simple Hide App app from a youtube video tut, but I can't get it to export with the icon I've chosen. Any clues why?

    I'm trying to learn how to use Xcode. I've create a simple Hide App app from a youtube video tut, but I can't get it to export with the icon I've chosen. Any clues why?

    We didn't do that video. Why are you asking here?
    Those videos are usually outdated....
    Use the current tools etc., in the iOS Dev Center and iTunes/iTunes U ~ Stanford.

  • How to use the eventing and databag with a WAS 6.20 ?

    How to use the eventing and databag with a WAS 6.20 ?
    Is what there is a good guide for these services?
    Thank's

    In the raise event you can pass the value
    like below.
    <SCRIPT>
    function raiseEvt(value1){
    if(window.document.domain == window.location.hostname){
    if ( document.domain.indexOf(".") > 0 ) document.domain = document.domain.substr(document.domain.indexOf(".")+1);
       EPCMPROXY.raiseEvent( "urn:com.sap:BWEvents","BWiViewevent", value1, null );
      // alert('tree domain'+document.domain);
    </SCRIPT>
    and in the
    subscribe event you can get the values like below.
    <script language="javascript">
    if(window.document.domain == window.location.hostname){
    document.domain = document.domain.substring(document.domain.indexOf('.')+1);
        EPCMPROXY.subscribeEvent("urn:com.sap:BWEvents","BWiViewevent", window, "myreceiveEvent");
    function myreceiveEvent( eventObj ) {
          document.forms[0].gp_hidden.value = eventObj.dataObject;
    </script>
    Also look at the following link for a complete documentation.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/Enterprise%20Portal%20Client.pdf
    Regards
    Raja

  • Hi, somebody knows how to edit a file that I created in corel draw 11 and I need to edit like PDF!!!! is so simple and nobody knows howwwwwwwwwwww!!!!

    Hi, somebody knows how to edit a file that I created in corel draw 11 and I need to edit like PDF!!!! is so simple and nobody knows howwwwwwwwwwww!!!!

    See your other thread.

  • How to use Protected event CLICK_ROW_COL  of  cl_gui_alv_grid.

    I've  worked with Double_click,Hotspot_click events of Cl_gui_alv grid class quite comfortable as they are Public.
    But i'm unable to work with click_row_col..
    Could u tell me how to use protected event click_row_col..

    Hi Ilayarajaramana 
    Did you try to build up a subclass of cl_gui_alv_grid and access the protected events via the subclass?
    You could e.g. throw an own public event every time the click_row_col event is risen.
    I know this isn't the best way, but it should work.
    Kind Regards,
    Sebastian

  • How to find the TCODE that is created for the table maintanance generator

    Hi ,
    How to find the TCODE that is created for the table maintanance generator of particular table,if we only know the table name.
    Regards
    Ramakrishna L

    Hello,
    I try it this way
    1. Goto SE16 --> enter table TSTCP.
    2. In the selection-screen displayed, enter
    PARAM = *<ZTABNAME>*
    You will get the t-code for the TMG.
    BR,
    Suhas
    PS: Are you sure a t-code has been created for this TMG ?

  • How can I delete albums that I created and imported photos into on my iPhone4

    How can I delete albums that I created and imported photos into on my iPhone4

    If you synced the Photos from your computer to your phone, you have to unsync the pictures via iTunes.
    Summary Pane > Photos > Uncheck "Sync Photos from ..."

  • How to see other events that have clips used in project and not just reference event for a project

    In 10.0.9 if you selected a project and then looked at info tab in the inspector you could see the reference event and all events that had used clips in the project. In 10.1 you only see the reference event. So how do you see other events in the library that the project uses clips from?

    I see. Yes, that probably should be improved. They removed the function that displayed the used events.
    Open the project. Select the library. In the browser in list view, which shows the events in order, select everything. Press right-arrow to open the disclosure triangles. Scroll the list to see what's marked used where. Not great.

  • How to use MobileMe family email acct created at my iMac on iPad 1 that already has free yahoo mail set up on it?

    How to establish and use MobileMe family email acct created at my iMac on iPad 1 that already has free yahoo mail acct set up on it.

    I don't know what the limit is for the number of email accounts that can be accessed with the iPad's Mail app if there is a limit, but it is definitely more than one email account.
    Add the MobileMe account - at Settings > Mail, Contacts, Calendars, select Add Account. Select MobileMe and follow the prompts.

  • HT201365 how do i change the passcode for using my ipad that i created when installing find my iphone. the is different from my apple id and password

    how do i change the passcode for using my ipad which i created when i set up findmyiphone.  this is different from my apple id and password

    On both your devices go to Settings>iCloud, then scroll down and click "Delete Account". You can then sign back in using your updated details.
    Note: "Delete Account" will not delete data from iCloud, it will simply remove the account from your device.

  • How to use a event structure in a subVI

    I am trying to use an event structure inside a subVI.  The subVI has an array builder that builds arrays, and the event structure is used so that when the program is running, it allows you to change the elements of the array.  It works, but when I implement it inside a subVI, it does not work properly.  This is going into a subVI, because it will be a part of a much larger progrram, so it needs to be modular.

    If you're using an event structure, it's not a subVI.  if you're worried about modularity, you shouldn't be using the event structure.
    You seem to have a fundamental misunderstanding of modularity.  An event structure should be placed within a while loop.  If you have a while loop within a subVI, you've handed over control of your program to the subVI.  You're not modular at this point.  Your top level GUI has no control.  You'd have to create some asinine system of variables to pass data down to that loop to stop the loop and return to your main VI.  That's not a good design decision.
    Instead of looking for a way to do something broken, you should spend effort trying to understand what you actually want to accomplish.  You should also spend some time learning how event structures work.
    This application is small right now and it's already on the path to unreadable.  That's a terrible thing to do to yourself.  Break these habits now.  se variables only when absolutely necessary.  Use subVIs to accomplish individual tasks, not run the entire application.  With event structures, use a stop button value change event to not be held hostage by the timeout.  If your variable has "2" in it, you're doing something wrong.  There has to be something different between the setpoints, put that in the name.  If you want to make subVIs, create an icon.
    But first and foremost, invest time in understanding dataflow

  • How to use a pwa group in CREATE A TASK PROCESS in SPD 2013 for project server workflow approval process

    I am working on a Project Server 2013 workflow. I am creating this using Sharepoint Designer 2013. In this workflow I am using approval process at one stage. I have created a security group SalesManagers in PWA. I want to use this group for workflow approval
    process. I want all users of this group get approval tasks. 
    For this I used START A TASK PROCESS activity in the SP Designer. I clicked on
    this user and created task process. But here I could not find SalesManager group which I created in PWA. I was only able to find the users. I can also see
    Administrators for PWA . But couldnot find SalesManager or any other security group created in pwa.
    Can anyone suggest how I can get the security group created in pwa.

    NBDevelopment,
    I believe SPD only recognizes the SharePoint Groups and not the project server security groups.
    The Administrators for PWA, and few other groups like Project Managers for PWA etc., are synced SharePoint Groups with the security groups, which is why they show up in SPD.
    You could create a SharePoint Group for the Sales Managers group and use that in SPD.
    Cheers,
    Prasanna Adavi, Project MVP
    Blog:
      Podcast:
       Twitter:   
    LinkedIn:
      

Maybe you are looking for