How to use BAPI_INB_DELIVERY_CHANGE to update vbpa fields ptnr no and fun
data : HEADER_DATA like
BAPIIBDLVHDRCHG,
HEADER_CONTROL like
BAPIIBDLVHDRCTRLCHG,
DELIVERY like
BAPIIBDLVHDRCHG-DELIV_NUMB,
TECHN_CONTROL like
BAPIDLVCONTROL,
HEADER_PARTNER like BAPIDLVPARTNERCHG
occurs 0 with header line.
CALL FUNCTION 'BAPI_INB_DELIVERY_CHANGE'
EXPORTING
header_data = HEADER_DATA
header_control = HEADER_CONTROL
delivery = DELIVERY
TECHN_CONTROL = TECHN_CONTROL
tables
HEADER_PARTNER = HEADER_PARTNER
HEADER_PARTNER_ADDR =
HEADER_DEADLINES =
ITEM_DATA =
ITEM_CONTROL =
ITEM_SERIAL_NO =
EXTENSION1 =
EXTENSION2 =
return =
TOKENREFERENCE =
HANDLING_UNIT_HEADER =
HANDLING_UNIT_ITEM =
PARTIAL_GR_OBJECTS =
thanks in advance.................
data : HEADER_DATA like
BAPIIBDLVHDRCHG,
HEADER_CONTROL like
BAPIIBDLVHDRCTRLCHG,
DELIVERY like
BAPIIBDLVHDRCHG-DELIV_NUMB,
TECHN_CONTROL like
BAPIDLVCONTROL,
HEADER_PARTNER like BAPIDLVPARTNERCHG
occurs 0 with header line.
CALL FUNCTION 'BAPI_INB_DELIVERY_CHANGE'
EXPORTING
header_data = HEADER_DATA
header_control = HEADER_CONTROL
delivery = DELIVERY
TECHN_CONTROL = TECHN_CONTROL
tables
HEADER_PARTNER = HEADER_PARTNER
HEADER_PARTNER_ADDR =
HEADER_DEADLINES =
ITEM_DATA =
ITEM_CONTROL =
ITEM_SERIAL_NO =
EXTENSION1 =
EXTENSION2 =
return =
TOKENREFERENCE =
HANDLING_UNIT_HEADER =
HANDLING_UNIT_ITEM =
PARTIAL_GR_OBJECTS =
thanks in advance.................
Similar Messages
-
How to use Innerjoin b/w these 2 tables VBAK and CDHDR ?
Hi,
How to use Innerjoin b/w these 2 tables VBAK and CDHDR for retrieving of changed sales order data ?I nned the A select stmt with INNER JOIN for changed sales data.
Thanks & Regards,
gopi.Hi Gopi,
You can use the code similar to below to read the changes to Sales order from CDHDR AND CDPOS
FORM GET_CHANGES .
* Get all the changes to Sales Order as well as Deliveries. Suppress
* Non relevant change
DATA : BEGIN OF SO_VBELN OCCURS 0 ,
VBELN LIKE CDHDR-OBJECTID,
END OF SO_VBELN.
DATA : BEGIN OF DL_VBELN OCCURS 0 ,
VBELN LIKE CDHDR-OBJECTID,
END OF DL_VBELN.
DATA TEMP_SO_VBELN LIKE SO_VBELN OCCURS 0 WITH HEADER LINE.
DATA DATE_UNTIL LIKE SY-DATUM.
DATA TIME_UNTIL LIKE SY-UZEIT .
DATA DATE_FROM LIKE SY-DATUM.
READ TABLE S_CHADT INDEX 1.
LOOP AT IT_VBAP.
AT NEW VBELN.
MOVE IT_VBAP-VBELN TO TEMP_SO_VBELN.
COLLECT TEMP_SO_VBELN.
ENDAT.
ENDLOOP.
IF TEMP_SO_VBELN[] IS NOT INITIAL.
SELECT OBJECTID AS VBELN FROM CDHDR
INTO TABLE SO_VBELN
FOR ALL ENTRIES IN TEMP_SO_VBELN
WHERE OBJECTCLAS EQ 'VERKBELEG'
AND OBJECTID EQ TEMP_SO_VBELN-VBELN
AND USERNAME IN S_CHABY
AND UDATE IN S_CHADT.
ENDIF.
LOOP AT IT_LIPS INTO WA_LIPS.
AT NEW VBELN.
MOVE WA_LIPS-VBELN TO DL_VBELN.
COLLECT DL_VBELN.
ENDAT.
ENDLOOP.
* Changes in Sales Order.
IF NOT SO_VBELN[] IS INITIAL.
* Get partner functions
SELECT * INTO TABLE IT_TPART
FROM TPART WHERE SPRAS EQ SY-LANGU.
SELECT A~TABNAME A~FIELDNAME A~DATATYPE B~DDTEXT
INTO CORRESPONDING FIELDS OF TABLE IT_FIELD
FROM DD03L AS A INNER JOIN
DD04T AS B
ON A~ROLLNAME EQ B~ROLLNAME
AND A~AS4LOCAL EQ B~AS4LOCAL
WHERE ( A~TABNAME EQ 'VBAK'
OR A~TABNAME EQ 'VBAP'
OR A~TABNAME EQ 'VBEP'
OR A~TABNAME EQ 'VBPA'
OR A~TABNAME EQ 'VBUK'
OR A~TABNAME EQ 'VBKD' )
AND A~AS4LOCAL EQ 'A'
AND A~AS4VERS EQ '0000'
AND A~ROLLNAME NE SPACE
AND B~DDLANGUAGE EQ SY-LANGU.
* Preapare the exclusion table
R_EXCL_FIELDS-OPTION = 'EQ'.
R_EXCL_FIELDS-SIGN = 'I'.
LOOP AT IT_FIELD WHERE DATATYPE EQ 'CURR'.
R_EXCL_FIELDS-LOW = IT_FIELD-FIELDNAME.
APPEND R_EXCL_FIELDS.
ENDLOOP.
R_EXCL_FIELDS-LOW = 'ARKTX'.
APPEND R_EXCL_FIELDS.
R_EXCL_FIELDS-LOW = 'LGORT'.
APPEND R_EXCL_FIELDS.
R_EXCL_FIELDS-LOW = 'TDDAT'.
APPEND R_EXCL_FIELDS.
R_EXCL_FIELDS-LOW = 'LDDAT'.
APPEND R_EXCL_FIELDS.
R_EXCL_FIELDS-LOW = 'MBDAT'.
APPEND R_EXCL_FIELDS.
R_EXCL_TABL-OPTION = 'EQ'.
R_EXCL_TABL-SIGN = 'I'.
R_EXCL_TABL-LOW = 'KONVC'.
APPEND R_EXCL_TABL.
R_EXCL_TABL-LOW = 'VBKD'.
APPEND R_EXCL_TABL.
LOOP AT SO_VBELN.
REFRESH ITAB_CDHDR.
DATE_FROM = S_CHADT-LOW.
DATE_UNTIL = S_CHADT-HIGH.
CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
EXPORTING
DATE_OF_CHANGE = DATE_FROM
OBJECTCLASS = 'VERKBELEG'
OBJECTID = SO_VBELN-VBELN
TIME_OF_CHANGE = TIME_UNTIL
DATE_UNTIL = DATE_UNTIL
USERNAME = ' '
TABLES
I_CDHDR = ITAB_CDHDR
EXCEPTIONS
NO_POSITION_FOUND = 1
WRONG_ACCESS_TO_ARCHIVE = 2
TIME_ZONE_CONVERSION_ERROR = 3
OTHERS = 4.
IF SY-SUBRC NE 0.
CONTINUE.
ENDIF.
LOOP AT ITAB_CDHDR WHERE USERNAME IN S_CHABY.
REFRESH IT_CDSHW.
CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
EXPORTING
CHANGENUMBER = ITAB_CDHDR-CHANGENR
TABLES
EDITPOS = IT_CDSHW
EXCEPTIONS
NO_POSITION_FOUND = 1
WRONG_ACCESS_TO_ARCHIVE = 2
OTHERS = 3.
IF SY-SUBRC EQ 0.
PERFORM GET_ACTION .
ENDIF.
ENDLOOP.
ENDLOOP.
ENDIF.
* Changes in Delivery
IF NOT DL_VBELN[] IS INITIAL.
REFRESH : IT_CDHDR , IT_CDPOS.
SELECT OBJECTCLAS OBJECTID CHANGENR USERNAME UDATE
FROM CDHDR INTO CORRESPONDING FIELDS OF TABLE IT_CDHDR
FOR ALL ENTRIES IN DL_VBELN
WHERE OBJECTCLAS EQ 'LIEFERUNG'
AND OBJECTID EQ DL_VBELN-VBELN
AND USERNAME IN S_CHABY
AND UDATE IN S_CHADT
AND CHANGE_IND EQ 'U'.
LOOP AT IT_CDHDR.
CONCATENATE SY-MANDT IT_CDHDR-OBJECTID
INTO IT_CDHDR-TABKEY .
CONDENSE IT_CDHDR-TABKEY.
MODIFY IT_CDHDR.
ENDLOOP.
IF NOT IT_CDHDR[] IS INITIAL.
SELECT * INTO TABLE IT_CDPOS FROM CDPOS
FOR ALL ENTRIES IN IT_CDHDR
WHERE OBJECTCLAS EQ IT_CDHDR-OBJECTCLAS
AND OBJECTID EQ IT_CDHDR-OBJECTID
AND CHANGENR EQ IT_CDHDR-CHANGENR
AND TABNAME EQ 'LIKP'
AND TABKEY EQ IT_CDHDR-TABKEY
AND FNAME IN ('WADAT','LFDAT','ROUTE','VSBED')
AND CHNGIND EQ 'U' .
LOOP AT IT_CDPOS .
CLEAR IT_DL_CHG-FLAG_RED.
CASE IT_CDPOS-FNAME.
WHEN 'WADAT'.
MOVE 'Goods issue date changed' TO IT_DL_CHG-ACTION.
WHEN 'LFDAT'.
MOVE 'Delivery date changed' TO IT_DL_CHG-ACTION.
MOVE 'X' TO IT_DL_CHG-FLAG_RED.
WHEN 'ROUTE'.
MOVE 'Route Changed' TO IT_DL_CHG-ACTION.
WHEN 'VSBED'.
MOVE 'Shipping Condition Changed' TO IT_DL_CHG-ACTION.
WHEN OTHERS.
ENDCASE.
AT NEW CHANGENR .
READ TABLE IT_CDHDR WITH KEY OBJECTCLAS = IT_CDPOS-OBJECTCLAS
OBJECTID = IT_CDPOS-OBJECTID
CHANGENR = IT_CDPOS-CHANGENR
BINARY SEARCH.
MOVE IT_CDHDR-USERNAME TO IT_DL_CHG-ERNAM.
WRITE IT_CDHDR-UDATE TO IT_DL_CHG-ERDAT.
ENDAT.
IT_DL_CHG-COUNTER = IT_DL_CHG-COUNTER + 1.
MOVE IT_CDPOS-OBJECTID TO IT_DL_CHG-VBELN.
MOVE IT_CDPOS-VALUE_OLD TO IT_DL_CHG-OLD_VAL.
MOVE IT_CDPOS-VALUE_NEW TO IT_DL_CHG-NEW_VAL.
INSERT TABLE IT_DL_CHG.
ENDLOOP.
ENDIF.
ENDIF.
ENDFORM. " GET_CHANGES
Cheers
VJ -
How to use the same services-config for the local and remote servers.
My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
<services>
<service id="amfphp-flashremoting-service"
class="flex.messaging.services.RemotingService"
messageTypes="flex.messaging.messages.RemotingMessage">
<destination id="amfphp">
<channels>
<channel ref="my-amfphp"/>
</channels>
<properties>
<source>*</source>
</properties>
</destination>
</service>
</services>
<channels>
<channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
<endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
</channel-definition>
</channels>
</services-config>
I think the problem is the line
<endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime . -
In this episode of the Adobe Creative Suite Podcast Terry White shows how to use the Pen Tool to create Art, Frames and to trace images in Photoshop CS6. If you've never used the Pen Tool before, this is your video!
http://adobe.ly/STegFgWith the pen tool in Indesign, is there a way of making the points not join if you want to make a few single lines?
-
How to use Powershell to update user details in Active Directory?
Hi,
I received an updated contact list from HR of about 1500 names, and I want to update (make corrections and add missing data) ADUC quickly without having to do each user manually. How would I go about that using power-shell?
The fields that need updating are:
Under the General tab -> Description, Telephone number
Everything under the Address tab
Under the Telephone tab - > Mobile
Under the Organization tab -> Job Title, Department, Company, Manager
The server we're using is Windows Server 2008 R2.
Many thanks,
NickThere are 100 of such scripts are there online.
here are few tips and codes. you will get more.
https://gallery.technet.microsoft.com/scriptcenter/Feeding-data-to-Active-0227d15c
http://blogs.technet.com/b/heyscriptingguy/archive/2012/10/31/use-powershell-to-modify-existing-user-accounts-in-active-directory.aspx
http://powershell.org/wp/forums/topic/ad-import-csv-update-attributes-script/
Please mark this as answer if it helps -
How to use new patch updates in track
Hi All,
I am a developer working in NWDI. We have everything in place and working fine upto now.
SAP has release a patch for the software component i am using in a track. Basis guys have updated the track and they confirmed the patch is updated successfully.
Now when ever i rebuild my DC, the changes are not effected as per the new patch. Please let me how I will be able to use new patch updates in my DC(In NWDS I can see the old source code only, I did all SYNC's and refresh but didnt worked, even NWDI is restarted)
How I can confirm that the patch is updated to track successfully, from a developer point of view.
I have access to CMS and CBS.
Regards,
Sateesh ChandraDid you update your configuration in the studio?
--MLS -
How to use Count with other all fields
Hello guys. Sorry about my question because it s syntax but i didnt find in google.
How can i use count combined with other all fields.
Like SELECT count(*) 'other all fields like * ' FROM VBAK .
Thank you very much.Don't sure to understand your requirement (count would always be 1, aggregates are only defined with grouping)
So either use two SELECT (or replace count(*) counting Nr of records selected) if no relation between count and field values....
Or use a dynamic SELECT syntax. Use FM DDIF_FIELDINFO_GET to get field list, then create fieldlist with every field name and count(*), create grouplist with every field name
SELECT (fieldlist)
INTO ...
FROM table
GROUP BY (grouplist).
Regards,
Ramond -
Error using Bapi_PO_Change for update custom fields
Dear Expert,
I have requirement for update custom field in table ekko. I used BAPI_PO_CHANGE with PO_number as a key. Then i put the value of custom field in segment TABLES - EXTENSIONIN.
But I get error : "ERROR TRANSFERING EXTENSIONIN DATA FOR ENHANCEMENT CI_EKKODB".
When I checked, I found the difference between data type the value for BAPI_PO_CHANGE (Usinf structure BAPIPAREX) and data type for custom field in table EKKO.
Data Type in BAPI_PO_CHANGE is CHAR (you can see in structure BAPIPAREX). And data type for the custom field is DECIMAL.
I found the note '1124803', but the correction note was not applicable for us because our released system is 500.
Is there any suggestion or solution for resolve our problem?
Really appreciate your help.
Thanks.Hi Laxmikanth Bethi ,
I tried with BAPI_PO_CHANGE in level header, and SAP was support the BAPI. And also i tried to appending the same fields in MEPOHEADR & MEPOHEADERX structures, but the problem is the type of my custom fields are DECIMAL, then the type MEPOHEADR & MEPOHEADERX structures are CHARACTER. So i got the error : "ERROR TRANSFERING EXTENSIONIN DATA FOR ENHANCEMENT CI_EKKODB".
Because the types are difference.
Have you any suggestion to solve this problem?
Really appreciate for your input. -
hello,everybody ,it a question makes me crazy .my code is that :
public string tableName = "";
public DataSet ds;
public OleDbDataAdapter myAdapter;
public string sql = "";
private void button12_Click_1(object sender, EventArgs e)
sql = textBox5.Text.Trim();
OleDbConnection Conn = new OleDbConnection(st_contractconn);
Conn.Open();
this.comboBox1.Items.Add(this.textBox5.Text);
try
System.Text.RegularExpressions.Regex r = new System.Text.RegularExpressions.Regex(@"(?<=from\s)\w+(?=\s)");
System.Text.RegularExpressions.Match B = r.Match(sql);
tableName = B.ToString();
OleDbCommand cmd = new OleDbCommand("SELECT * FROM PT_PO",Conn);
Conn.Close();
myAdapter = new OleDbDataAdapter(cmd);
ds = new DataSet();
myAdapter.Fill(ds, "PT_PO");
dataGridView2.DataSource = ds.Tables["PT_PO"].DefaultView;
this.groupBox2.Text = "共查询到" + ds.Tables[0].Rows.Count.ToString() + "条记录" + tableName;
catch (Exception ex)
MessageBox.Show(ex.Message);
private void button26_Click(object sender, EventArgs e)
OleDbConnection Conn = new OleDbConnection(st_contractconn);
Conn.Open();
OleDbCommandBuilder Builder = new OleDbCommandBuilder(myAdapter);
Validate() ;
myAdapter.Update(ds.Tables["PT_PO"]);
Conn.Close();
ds.AcceptChanges() ;
when it run to the myAdapter.Update(ds.Tables["PT_PO"]); it comes out a wrong "对于不返回任何基表信息的 SelectCommand 不支持动态 SQL 生成。" who knows it is why ,my QQ is 501212848,thankyou very much.Hello,
We were a IBM-DB2 shop for over 20 years, when we moved to .NET we found it was better to use the native DB2 data provider which you can download from IBM for free.
Main objects
IBM.Data.DB2.iSeries.iDB2Connection
IBM.Data.DB2.iSeries.iDB2Command
IBM.Data.DB2.iSeries.iDB2Parameter
So you would not use adapters but write code using the key objects above. Then to get new primary keys we would use
SELECT nextval for SOMETABLE_REF_AUTONUMBER_SEQUENCE from sysibm.sysdummy1
Bottom line is the structure is create a connection, create a command, set the connection and command text along with creating parameters as needed.
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.
what is the meaning about you ? db2 cannt using adapters to update the datebase? -
I have the MC086LL S.N.1F******75J, I haven't any clue how to set up any updates and to get the YOUTUBE channel's or anything else at that matter on it?? What do i do ?? Please Help if anyone can??
<Personal Information Edited by Host>A 3rd gen iPod touch can run up to iOS 5.1.1. If the apps you need require a later version of iOS, you will need a newer iPod touch.
The 4th gen model, which is still available on Apple Store's refurb ("Special Deals") page can run up to iOS 6.1.3. The current 5th gen model can run the current iOS 7.x. -
How to Use A Timemachine Back Up Drive for backup and storage?
I bought a 1TB external drive, and installed a 1TB SSD in my Macbook Pro 13in Early 2011 i-5, and have 426gb free, the other 200 or so is for bootcamp. I used the external as a timemachine back up, but there should be some extra space right??? I need someplace for storage for my videos and photos for work, and I don't want to go out and buy another 500gb external. Can I just use the one for timemachine for both timemachine and storage?
I plan on getting a second drive eventually but this is more of a last minute kind of transfer, i need to take a bunch of wedding videos and move them over to my laptop, and I don't have the money or time to get another external.
how would I use the current one I have for storage, because when I plugged it in it reads it only as a time machine back up and drive and opens differently, I don't have it on me now to test it again, but just drag and drop files into it? -
Data Merge: How to use script on the preview next a record and pre a record?
Preview data records too much, want to use the script implementation preview next a record and pre a record, and set shortcut keys for the script.
the following script can be opened and closed to preview:
app.menuActions.itemByID(108035).checked
But I don't know preview next a record and pre a record script in how to implement.Bump. I'm looking for this shortcut as well. Any help would be very appreciated.
-
BP extend : how to use FM to update customer specific fields ?
Hello
I'm working on a CRM 2007 project and for customer needs, the BP data have been extent with specific fields using EEWB. So specific FMs have been automatically generated to manage the specific data. We want to use these FM to maintain the values of the specific fields. In the EEWB transaction, in the Task BUPA_API for the specific object, 2 FMs have been generated : ZZ1XO_BUPA_MAINTAIN and ZZ1XO_BUPA_MNTN_ALL : we suppose we have to use these FMs to update the values fo this object. This object (customer specific data) is time dependent with gaps and multiple instance. We tried to use these 2 FMs to update values but it does not work : anybody has already used this kind of FMs ?
Thanks to all.Jerome,
Normally I use the FM modules generated by the EEWB that contain API to update the data. However keep in mind if this is a Z-Table and you don't like what is provided, then add your own BAPI modules to the BDT function group to update the data.
Take care,
Stephen -
Having a problem using Workflow to update a field based on ZIP code
I created a Workflow to update a Yes/No picklist called eligibility based on a Text (Short) field called Applicant ZIP code.
It's set to update on the Opportunity page:
Before modified record saved
And the value function is:
IIf(InStr("60601_60602",[<stApplicant_Zip_Code_ITAG>|http://forums.oracle.com/forums/]+)>0,"Yes","No")+
That was a guess of how to try it while relying on my limited MS SQL & Access knowledge.
It does work correctly using what I did. The problem I have is that I actually need to choose from over 600 ZIP codes. The function window only allows for 256 characters. (And I suspect my way is fairly inelegant for search a multi-thousand character string.)
Any suggestions?I created a Workflow to update a Yes/No picklist called eligibility based on a Text (Short) field called Applicant ZIP code.
It's set to update on the Opportunity page:
Before modified record saved
And the value function is:
IIf(InStr("60601_60602",[<stApplicant_Zip_Code_ITAG>|http://forums.oracle.com/forums/]+)>0,"Yes","No")+
That was a guess of how to try it while relying on my limited MS SQL & Access knowledge.
It does work correctly using what I did. The problem I have is that I actually need to choose from over 600 ZIP codes. The function window only allows for 256 characters. (And I suspect my way is fairly inelegant for search a multi-thousand character string.)
Any suggestions? -
How to use At Selection Screen for fields whiledealing with Multiple Blocks
Hi Guys,
In my requirement i am having 4 blocks.1st block with raduio buttons for activating the opther 3 Blocks.
In these 3 blocks i am having some fields.
How to do Validation for these fields.?
I am using At Selection-screen on S-SCAD1. I am getting error"S_SCACD1 is neither a selection screen nor a Parameter"
On the top of this" At Selection-screen on S-SCAD1" I am having"AT SELECTION-SCREEN OUTPUT."
Can anybody tell me how to solve this error?
Thanks,
Gopi.If you are using your block name than you should use like:
AT SELECTION-SCREEN ON BLOCK S-SCAD1.
Regards,
Naimesh Patel
Maybe you are looking for
-
How do I sync my Adobe Reader files from my smartphone to my laptop?
I have some e-books and files on my Adobe Reader app through my phone, but I also want to read them on my laptop by logging on to Adobe.com. How can I sync these files from one place to another?
-
I am trying to upgrade from Windows 8 to 8.1. The download got at far as 61% complete, then notified me that it could not continue until I uninstalled MS Office 2010 Starter. I do not have this software and it is not in the list of programs that I ca
-
Making Markings in .PDF File
I'm playing a cool game. It's an old RPG-type game that uses the manual, which I have in .PDF. In that .PDF, there's, like, a list of quests and stuff. I'd like to be able to check stuff off on the page of the book in the .PDF. You know, as if usi
-
Can I make DVD of HDV quality in iDVD?
I shooted HDV by Sony hdr-hc1. and I edited the movie (1080 60i) in iMovie, then I export to h.264 format of that movie. I import h.264 in iDVD, then authoring.. but that Quality of video is lower as same as DV quality. and disk size is lower as quar
-
Hi all, I wanted to share with you all a new tutorial I have made. Its using the dancing dissolve blend mode to create an interesting aged film look. I know .http://chrisforrester.tv/2013/04/dancing-dissolve-tutorial/ You can view it at the web add