Data Merge: How to use script on the preview next a record and pre a record?

Preview data records too much, want to use the script implementation preview next a record and pre a record, and set shortcut keys for the script.
the following script can be opened and closed to preview:
app.menuActions.itemByID(108035).checked
But I don't know preview next a record and pre a record script in how to implement.

Bump. I'm looking for this shortcut as well. Any help would be very appreciated.

Similar Messages

I have recently got a new replacement iPhone 4. since I got this I have found that my data allowance is getting used up during the night while my phone is charging on the bedside table. How an I find out what is causing this and stop it happening

I have recently got a new replacement iPhone 4. Since I got this I have found that my data allowance is getting used up during the night while my phone is charging on the bedside table. How an I find out what is causing this and stop it happening? Some nights the usage is 150 meg!

You can not access the backup directly.
Did you restore your replacement from this backup?
If so then you already have everything in the backup on your device.
If not, you can wipe the device and restore from this backup:
Settings > General > Reset > Erase All Content & Settings
What is it you are worried about losing that isn't already on your current device?

How to use ranges in the program

hi all,
my requirement is i need to create a range for srat date so iam creating a structure say name of the range table is zstartdate. how to use this table in my program.
selct * from zuser_Secobjects where start_date in zstartdate. is it ok ?
thanks
maheedhar.t

hi maheedhar,
I am sending u the sample program and the docs also.
Program:
                T A B L E D E C L E R A T I O N                     *
**-- Tables used
**-- VBAK.    "Sales Document: Header Data
                  T Y P E D E C L E R A T I O N                     *
**-- Type for VBAK
TYPES: BEGIN OF T_VBAK,
      VBELN LIKE VBAK-VBELN,
      ERDAT LIKE VBAK-ERDAT,
      AUART LIKE VBAK-AUART,
      END OF T_VBAK.
       I N T E R N A L T A B L E D E C L E R A T I O N             *
**-- Internal table to store header data
DATA: IT_VBAK TYPE STANDARD TABLE OF T_VBAK WITH HEADER LINE.
**-- Ranges for Inquiry/Quotation
RANGES R_AUART FOR VBAK-AUART.
       C O N S T A N T S           D E C L E R A T I O N             *
**-- Constant to store value of Inquiry (IN) / Quotation (QT).
CONSTANTS: C_IN LIKE VBAK-AUART VALUE 'AF',
           C_QT LIKE VBAK-AUART VALUE 'AG',
           C_EQ(4) TYPE C VALUE 'EQ',
           C_I(2) TYPE C VALUE 'I'.
                     I N I T I A L I Z A T I O N                     *
**-- Clear the internal tables and flag.
CLEAR: IT_VBAK,
       R_AUART.
**-- Refresh the internal tables.
REFRESH: IT_VBAK,
         R_AUART.
**-- Initialization of ranges
R_AUART-SIGN = C_I.
R_AUART-OPTION = C_EQ.
R_AUART-LOW = C_IN.
APPEND R_AUART.
CLEAR R_AUART.
R_AUART-SIGN = C_I.
R_AUART-OPTION = C_EQ.
R_AUART-LOW = C_QT.
APPEND R_AUART.
CLEAR R_AUART.
            S E L E C T I O N S C R E E N                           *
SELECTION-SCREEN BEGIN OF BLOCK CHARLY WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_VBELN FOR IT_VBAK-VBELN OBLIGATORY.
SELECT-OPTIONS: S_ERDAT FOR IT_VBAK-ERDAT.
SELECTION-SCREEN END OF BLOCK CHARLY.
A T S E L E C T I O N S C R E E N ( V A L I D A T I O N S )      *
AT SELECTION-SCREEN.
**-- Check the sales order number exists in the database table or not
SELECT SINGLE VBELN
                FROM VBAK
                INTO IT_VBAK
                WHERE VBELN IN S_VBELN
                  AND ERDAT IN S_ERDAT
                  AND AUART IN R_AUART.
**-- If no single data selected display error message.
IF SY-SUBRC <> 0.
    MESSAGE E000.
ENDIF.
               S T A R T O F S E L E C T I O N                     *
START-OF-SELECTION.
**-- To fetch data from database table (VBAK)
**-- Store the data into the internal tabe (IT_VBAK)
PERFORM ZF_GETDATA.
                 E N D O F S E L E C T I O N                       *
END-OF-SELECTION.
**-- To display sales order.
PERFORM ZF_CHECK_DISPLAY.
                        T O P O F P A G E                         *
TOP-OF-PAGE.
**-- Page header
PERFORM ZF_TOP_OF_PAGE.
                        E N D O F P A G E                         *
END-OF-PAGE.
**-- Page footer
PERFORM ZF_END_OF_PAGE.
*&      Form ZF_GETDATA
      text
--> p1        text
<-- p2        text
FORM ZF_GETDATA .
SELECT VBELN
         ERDAT
         AUART
         INTO TABLE IT_VBAK
         FROM VBAK
         WHERE VBELN IN S_VBELN
               AND ERDAT IN S_ERDAT
               AND AUART IN R_AUART.
IF SY-SUBRC <> 0.
    MESSAGE S001 WITH IT_VBAK-VBELN.
ELSE.
    SORT IT_VBAK.
ENDIF.
ENDFORM.                    " ZF_GETDATA
*&      Form ZF_CHECK_DISPLAY
      text
--> p1        text
<-- p2        text
FORM ZF_CHECK_DISPLAY .
CLEAR: IT_VBAK.
   LOOP AT IT_VBAK.
IF IT_VBAK-AUART = C_IN.
    ULINE.
    WRITE:/1 SY-VLINE, 10 TEXT-006 INVERSE COLOR COL_HEADING,
           50 TEXT-007 INVERSE COLOR COL_HEADING,
           143 SY-VLINE.
      WRITE:/1 SY-VLINE,12 IT_VBAK-VBELN INVERSE COLOR COL_NORMAL,
             52 IT_VBAK-ERDAT INVERSE COLOR COL_NORMAL,
             143 SY-VLINE.
ENDIF.
IF IT_VBAK-AUART = C_QT.
    ULINE.
    WRITE:/1 SY-VLINE, 10 TEXT-008 INVERSE COLOR COL_HEADING,
            50 TEXT-007 INVERSE COLOR COL_HEADING,
            143 SY-VLINE.
      WRITE:/1 SY-VLINE,12 IT_VBAK-VBELN INVERSE COLOR COL_NORMAL,
             52 IT_VBAK-ERDAT INVERSE COLOR COL_NORMAL,
             143 SY-VLINE.
ULINE.
ENDIF.
   ENDLOOP.
ENDFORM.                    " ZF_CHECK_DISPLAY
*&      Form ZF_TOP_OF_PAGE
Header of the page gets displayed as soon as a new page is generated
FORM ZF_TOP_OF_PAGE .
ULINE.
WRITE:/1 SY-VLINE, 5 TEXT-002 INVERSE COLOR 7,143 SY-VLINE.
WRITE:/1 SY-VLINE, 143 SY-VLINE .
WRITE:/1 SY-VLINE, 30 TEXT-003 INVERSE COLOR 7,143 SY-VLINE.
WRITE:100 TEXT-004 INVERSE COLOR 7,120 SY-DATUM INVERSE COLOR 7,
143 SY-VLINE.
WRITE:/1 SY-VLINE,100 TEXT-005 INVERSE COLOR 7,
120 SY-PAGNO INVERSE COLOR 7,143 SY-VLINE.
ULINE.
ENDFORM.                    " ZF_TOP_OF_PAGE
*&      Form ZF_END_OF_PAGE
Footer text displayed in each page
FORM ZF_END_OF_PAGE .
WRITE:/60 TEXT-008.
Docs:
                                       Ranges
A selection table is linked to the column of a database table, or to an internal field in the program. A selection table is an internal table object of the standard table type that has a standard key and a header line.
In addition to selection tables that we create using SELECT-OPTIONS, we can use the RANGES statement to create internal tables that have the structure of selection tables. You can use these tables with certain restrictions the same way you use actual selection tables.
A ranges table type is a special case of a table type. A ranges table type describes the structure of an internal table for administrating complex areas, i.e. the type of an internal table ranges table in the ABAP program.
The row type of a ranges table type has a fixed structure. The row type consists of 4 components SIGN (sign), OPTION (comparison operator), LOW (lower limit) and HIGH (upper limit) in this order.
1.     SIGN The database type of SIGN is C with length 1. The contents of SIGN determine for each row whether the result of the row condition is to be included in or excluded from the resulting set of all rows. Possible values are I (inclusion criterion operators are not inverted) and E (exclusion criterion operators are inverted).
2.      OPTION The database type OPTION is C with length 2. It contains the selection operator. The following operators are available:-
-     If HIGH is empty, we can use EQ, NE, GT, LE, LT, CP, and NP.
-     CP and NP are only allowed if wildcards (*' or '+) are used in the input fields.
-     If wildcards are entered on the selection screen, the system automatically uses the operator CP. The escape character is defined as #.
-      If HIGH is filled, you can use BT (Between) and NB (Not Between). We cannot use wildcard characters.
3.     LOW - The data type of LOW is the same as the column type of the              database table, to which the selection criterion is linked.
If HIGH is empty, the contents of LOW define a single field comparison. In combination with the operator in OPTION, it specifies a condition for the database selection.
     If HIGH is filled, the contents of LOW and HIGH specify the upper and lower limits for a range. In combination with the operator in OPTION, the range specifies a condition for the database selection.
4.     HIGH - The data type of HIGH is the same as the column type of the database table, to which the selection criterion is linked. The contents of HIGH specify the upper limit for a range selection.
If the selection table contains more than one row, the system applies the following rules when creating the complete selection criterion:
1.     Form the union of sets defined on the rows that have SIGN field equal to I (inclusion).
2.     Subtract the union of sets defined on the rows that have SIGN field equal to E (exclusion).
3.     If the selection table consists only of rows in which the SIGN field equals E, the system selects all data outside the set specified in the rows.
RANGES tables
We can use the following variants of the TYPES and DATA statements to create internal tables of the same type as selection tables.
TYPES|DATA .
An elementary associated type defines the type of components LOW and HIGH. It can be defined by specifying a data element or by directly defining the data type, number of places and if necessary the number of decimal places.
A ranges table type always has Standard table access mode and a standard key that is non-unique.
I think this will help u .
Reward points if helpful.
Regards
Nilesh

How to use Script in ADF model?

Hi!
I don't know how to use Script in ADF model. Help me, please!
Detail: javaScript.
Thanks so much!

You can put your Javascript code in the Onmouseover property of the column.
I don't have the Javascript code for changing the color but for example the following will pop up an alert
<af:outputText value="#{row.DepartmentId}" onmouseover="alert(\'Unload event fired!\')">

I just bought photoshop elements 13 last night. Today I am watching tutorial videos to show me how to use it, but the videos are showing me things I don't have. Asking me to click on tabs i don't have. Why is this? Is there another way I can learn? Or is

I just bought photoshop elements 13 last night. Today I am watching tutorial videos to show me how to use it, but the videos are showing me things I don't have. Asking me to click on tabs i don't have. Why is this? Is there another way I can learn? Or is my download messed up and not giving me everything I need?

Got a link showing us which video tutorials you're watching and examples of what's missing in your software?

I am planning to switch to the "iPhone for Life Plan" with unlimited data. How do i determine what the balance is on my equipment installment plan?

I am planning to switch to the "iPhone for Life Plan" with unlimited data. How do i determine what the balance is on my equipment installment plan?

Yes I am considering switching from the VZ Edge to Sprint iPhone for Life plan.
Thanks,
Adrian
>> Personal information removed to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

How to use shortDesc in the disabled inputtext

hi,all
i encounter a problem,our team must use disabled inputtext when the text is only used to output string.
the reson we don't use outputext is if there is noting in the outputtext,there is nothing displayed.
how to use shortDesc in the disabled inputtext?
here is the code:
<af:inputText value="#{bindings.shortdesc.inputValue}" disable="true"
id="ot2" columns="25" shortDesc="#{bindings.longdesc.inputValue}"
simple="true"/>
thanks all

Hi,
........... I use JDev 11g ..............
If you make your inputText disabled -----> shortDesc will not be displayed.
You can make a workaround to achieve this by using popup as :
1- add showPopupBehavior inside your inputText as :
<af:inputText label="label1" id="it1" disabled="true">
                <af:showPopupBehavior triggerType="mouseOver"
                                      align="endBefore" alignId="it1"
                                      popupId="p1"/>
              </af:inputText>2- add a popup which will display your shortDesc text
<af:popup id="p1">
                  <af:outputText value="Sameh POPUP" id="ot1"/>
          </af:popup>I hope it is useful.
Sameh Nassar

My inbox used to show the sender for each message and now it does not...how do I get it back to where it was?

My inbox used to show the sender for each message and now it does not...how do I get it back to where it was?

Right click the heading at the top of the message list and select From from the list of options.

How to use labview with the handyboard

Hi,
how to use labview with the handyboard
Thx...

I'm assuming you're talking about this, since you didn't provide a link for those of us who don't know what you're talking about.
As the other poster said, you didn't say how you want to use LabVIEW with it. If you want to write LabVIEW programs than run on the microprocessor, then you're out of luck. If you want LabVIEW to interact with it, then you've got a couple of options, SPI probably being the best, but it also has DI and AI that you could use to communicate with it - the DI's could be used as a parallel interface.
Message Edited by Matthew Kelton on 12-17-2007 02:21 PM

How to use PS to judge the existence of a folder in the specified directory and how to use PS in the specified directory to create to create the folder?(javascript)

1,How to use PS to judge the existence of a folder in the specified directory?(use javascript)
2, how to use PS in the specified directory to create to create the folder?(use javascript)
Thanks you!

Thanks you!

When the PC System timing runs as per normal, reaches 0000hrs - a new date. How to Auto re-execute the VI from its first sequence order?

When the PC System timing runs as per normal, reaches 0000hrs - a new date. How to Auto re-execute the VI from its first sequence order?

Duplicate Post

I downloaded the free trial for Adobe XI Pro but now I cant find it on my computer or figure out how to use it. The only thing I see that downloaded is Adobe Download Assistant. How can I access the program?

I downloaded the free trial for Adobe XI Pro but now I cant find it on my computer or figure out how to use it. The only thing I see that downloaded is Adobe Download Assistant. How can I access the program?

Assistanttolindsey the Adobe Download Assistant will download the installation files for Adobe Acrobat Professional XI. By default they are saved to your download folder. You can begin the installation process from there.

How to use Innerjoin b/w these 2 tables VBAK and CDHDR ?

Hi,
          How to use Innerjoin b/w these 2 tables VBAK and CDHDR for retrieving of changed sales order data ?I nned the A select stmt with INNER JOIN for changed sales data.
Thanks & Regards,
gopi.

Hi Gopi,
You can use the code similar to below to read the changes to Sales order from CDHDR AND CDPOS
FORM GET_CHANGES .
* Get all the changes to Sales Order as well as Deliveries. Suppress
* Non relevant change
DATA : BEGIN OF SO_VBELN OCCURS 0 ,
       VBELN LIKE CDHDR-OBJECTID,
       END OF SO_VBELN.
DATA : BEGIN OF DL_VBELN OCCURS 0 ,
       VBELN LIKE CDHDR-OBJECTID,
       END OF DL_VBELN.
DATA TEMP_SO_VBELN LIKE SO_VBELN OCCURS 0 WITH HEADER LINE.
DATA DATE_UNTIL LIKE SY-DATUM.
DATA TIME_UNTIL LIKE SY-UZEIT .
DATA DATE_FROM LIKE SY-DATUM.
READ TABLE S_CHADT INDEX 1.
LOOP AT IT_VBAP.
    AT NEW VBELN.
      MOVE IT_VBAP-VBELN TO TEMP_SO_VBELN.
      COLLECT TEMP_SO_VBELN.
    ENDAT.
ENDLOOP.
IF TEMP_SO_VBELN[] IS NOT INITIAL.
    SELECT OBJECTID AS VBELN FROM CDHDR
         INTO TABLE SO_VBELN
           FOR ALL ENTRIES IN TEMP_SO_VBELN
         WHERE OBJECTCLAS EQ 'VERKBELEG'
         AND OBJECTID EQ TEMP_SO_VBELN-VBELN
         AND USERNAME IN S_CHABY
         AND UDATE IN S_CHADT.
ENDIF.
LOOP AT IT_LIPS INTO WA_LIPS.
    AT NEW VBELN.
      MOVE WA_LIPS-VBELN TO DL_VBELN.
      COLLECT DL_VBELN.
    ENDAT.
ENDLOOP.
* Changes in Sales Order.
IF NOT SO_VBELN[] IS INITIAL.
* Get partner functions
    SELECT * INTO TABLE IT_TPART
      FROM TPART WHERE SPRAS EQ SY-LANGU.
    SELECT A~TABNAME A~FIELDNAME A~DATATYPE B~DDTEXT
       INTO CORRESPONDING FIELDS OF TABLE IT_FIELD
       FROM DD03L AS A INNER JOIN
            DD04T AS B
            ON A~ROLLNAME EQ B~ROLLNAME
            AND A~AS4LOCAL EQ B~AS4LOCAL
          WHERE ( A~TABNAME EQ 'VBAK'
                  OR A~TABNAME EQ 'VBAP'
                  OR A~TABNAME EQ 'VBEP'
                  OR A~TABNAME EQ 'VBPA'
                  OR A~TABNAME EQ 'VBUK'
                  OR A~TABNAME EQ 'VBKD' )
           AND A~AS4LOCAL EQ 'A'
           AND A~AS4VERS EQ '0000'
           AND A~ROLLNAME NE SPACE
           AND B~DDLANGUAGE EQ SY-LANGU.
* Preapare the exclusion table
    R_EXCL_FIELDS-OPTION = 'EQ'.
    R_EXCL_FIELDS-SIGN = 'I'.
    LOOP AT IT_FIELD WHERE DATATYPE EQ 'CURR'.
      R_EXCL_FIELDS-LOW = IT_FIELD-FIELDNAME.
      APPEND R_EXCL_FIELDS.
    ENDLOOP.
    R_EXCL_FIELDS-LOW = 'ARKTX'.
    APPEND R_EXCL_FIELDS.
    R_EXCL_FIELDS-LOW = 'LGORT'.
    APPEND R_EXCL_FIELDS.
    R_EXCL_FIELDS-LOW = 'TDDAT'.
    APPEND R_EXCL_FIELDS.
    R_EXCL_FIELDS-LOW = 'LDDAT'.
    APPEND R_EXCL_FIELDS.
    R_EXCL_FIELDS-LOW = 'MBDAT'.
    APPEND R_EXCL_FIELDS.
    R_EXCL_TABL-OPTION = 'EQ'.
    R_EXCL_TABL-SIGN = 'I'.
    R_EXCL_TABL-LOW = 'KONVC'.
    APPEND R_EXCL_TABL.
    R_EXCL_TABL-LOW = 'VBKD'.
    APPEND R_EXCL_TABL.
    LOOP AT SO_VBELN.
      REFRESH ITAB_CDHDR.
      DATE_FROM = S_CHADT-LOW.
      DATE_UNTIL = S_CHADT-HIGH.
      CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
        EXPORTING
          DATE_OF_CHANGE             = DATE_FROM
          OBJECTCLASS                = 'VERKBELEG'
          OBJECTID                   = SO_VBELN-VBELN
          TIME_OF_CHANGE             = TIME_UNTIL
          DATE_UNTIL                 = DATE_UNTIL
          USERNAME                   = ' '
        TABLES
          I_CDHDR                    = ITAB_CDHDR
        EXCEPTIONS
          NO_POSITION_FOUND          = 1
          WRONG_ACCESS_TO_ARCHIVE    = 2
          TIME_ZONE_CONVERSION_ERROR = 3
          OTHERS                     = 4.
      IF SY-SUBRC NE 0.
        CONTINUE.
      ENDIF.
      LOOP AT ITAB_CDHDR WHERE USERNAME IN S_CHABY.
        REFRESH IT_CDSHW.
        CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
          EXPORTING
            CHANGENUMBER            = ITAB_CDHDR-CHANGENR
          TABLES
            EDITPOS                 = IT_CDSHW
          EXCEPTIONS
            NO_POSITION_FOUND       = 1
            WRONG_ACCESS_TO_ARCHIVE = 2
            OTHERS                  = 3.
        IF SY-SUBRC EQ 0.
          PERFORM GET_ACTION .
        ENDIF.
      ENDLOOP.
    ENDLOOP.
ENDIF.
* Changes in Delivery
IF NOT DL_VBELN[] IS INITIAL.
    REFRESH : IT_CDHDR , IT_CDPOS.
    SELECT OBJECTCLAS OBJECTID CHANGENR USERNAME UDATE
           FROM CDHDR INTO CORRESPONDING FIELDS OF TABLE IT_CDHDR
         FOR ALL ENTRIES IN DL_VBELN
       WHERE OBJECTCLAS EQ 'LIEFERUNG'
       AND OBJECTID EQ DL_VBELN-VBELN
       AND USERNAME IN S_CHABY
       AND UDATE IN S_CHADT
       AND CHANGE_IND EQ 'U'.
    LOOP AT IT_CDHDR.
      CONCATENATE SY-MANDT IT_CDHDR-OBJECTID
       INTO IT_CDHDR-TABKEY .
      CONDENSE IT_CDHDR-TABKEY.
      MODIFY IT_CDHDR.
    ENDLOOP.
    IF NOT IT_CDHDR[] IS INITIAL.
      SELECT * INTO TABLE IT_CDPOS FROM CDPOS
           FOR ALL ENTRIES IN IT_CDHDR
         WHERE OBJECTCLAS EQ IT_CDHDR-OBJECTCLAS
         AND OBJECTID EQ IT_CDHDR-OBJECTID
         AND CHANGENR EQ IT_CDHDR-CHANGENR
         AND TABNAME EQ 'LIKP'
         AND TABKEY EQ IT_CDHDR-TABKEY
         AND FNAME IN ('WADAT','LFDAT','ROUTE','VSBED')
         AND CHNGIND EQ 'U' .
      LOOP AT IT_CDPOS .
        CLEAR IT_DL_CHG-FLAG_RED.
        CASE IT_CDPOS-FNAME.
          WHEN 'WADAT'.
            MOVE 'Goods issue date changed' TO IT_DL_CHG-ACTION.
          WHEN 'LFDAT'.
            MOVE 'Delivery date changed' TO IT_DL_CHG-ACTION.
            MOVE 'X' TO IT_DL_CHG-FLAG_RED.
          WHEN 'ROUTE'.
            MOVE 'Route Changed' TO IT_DL_CHG-ACTION.
          WHEN 'VSBED'.
            MOVE 'Shipping Condition Changed' TO IT_DL_CHG-ACTION.
          WHEN OTHERS.
        ENDCASE.
        AT NEW CHANGENR .
          READ TABLE IT_CDHDR WITH KEY OBJECTCLAS = IT_CDPOS-OBJECTCLAS
                                       OBJECTID = IT_CDPOS-OBJECTID
                                       CHANGENR = IT_CDPOS-CHANGENR
                                       BINARY SEARCH.
          MOVE IT_CDHDR-USERNAME TO IT_DL_CHG-ERNAM.
          WRITE IT_CDHDR-UDATE TO IT_DL_CHG-ERDAT.
        ENDAT.
        IT_DL_CHG-COUNTER = IT_DL_CHG-COUNTER + 1.
        MOVE IT_CDPOS-OBJECTID TO IT_DL_CHG-VBELN.
        MOVE IT_CDPOS-VALUE_OLD TO IT_DL_CHG-OLD_VAL.
        MOVE IT_CDPOS-VALUE_NEW TO IT_DL_CHG-NEW_VAL.
        INSERT TABLE IT_DL_CHG.
      ENDLOOP.
    ENDIF.
ENDIF.
ENDFORM.                    " GET_CHANGES
Cheers
VJ

How do I find out the exact path of each and every file that LabVIEW finds and loads into memory for a given top level vi?

How do I find out the exact path of each and every file that LabVIEW finds and loads into memory for a given top level vi? There is probably a trivial, easy way to get this info, but I have not yet found it! Thanks..

Or if you want to grab all the paths programatically, try the attached VI.
Open the top level that you want all the paths from and close all others, then open the
attached and run it. It will return an array of all the VIs that the VI
in question uses, including vi.lib VIs. You can filter these as well if
you like.
Ed
Message Edited by Ed Dickens on 08-01-2005 07:01 PM
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.
Attachments:
Get all paths.vi ‏29 KB

How can I found out the No. of Psocess running and How can I Release them

Dear experts,
How can I found out the No. of Psocess running and How can I Release them.
I have 1GB RAM with oracle 10G. and please tell me How many processes can run with this RAM.

>How can I found out the No. of Psocess running
well, that depends on where you are ? if you are on windows then task manager will tell you what all processes are running. if you are on unix then ps -ef will tell you about all the processes running on a particular machine
How can I Release them.
what do you exactly mean by Release ? if you mean "end" that again has 2 scenarios, first that process ends by itself (ie after completing its job), another can be killing the process , that again will depend upon operating system. in windows you can kill a process from task manager itself, in unix you can use kill -9 PID to kill a process.
How many processes can run with this RAM.
loads of other details required before one can answer this question.no of processes in a very simple manner will depend how much memory is available and how much a process is eating.
Sidhu

Data Merge: How to use script on the preview next a record and pre a record?

Similar Messages

Maybe you are looking for