How to use both Static and dynamic Reports in WAD using a single template.

Hi,
I have 2 reports - Report1 & Report2. Report1 is a static report with 3 column in it. In WAD user does not want to see the third series in the chart so I have made series3 invisible in the chart.
I am calling the Report2 via 'SET_DATA_PROVIDER_PARAMETERS' in the button option.
Now the issue is that, Report2 is a dynamic report which is using a calyear vaiable range. As Report2 is using the template of Report1, Series3 of Report2 also gets hidden.
Any solution for this?
Thanks
Nisha

Hi Nisha,
After setting the Report 2 DP thru SET_DATA_PROVIDER_PARAMETERS, you can use one more command SET_ITEM_PARAMETERS on the Chart webitem & edit the Series to make it visible. If there is a way to reset the DP back to Report 1, then you must once again use SET_ITEM_PARAMETERS to hide the Series.
Or you can use another Chart webitem for Report 2 DP & make the Chart webitem for Report 1 hidden & the Chart webitem for Report 2 visible using SET_ITEM_PARAMETERS after setting Report 2 DP using SET_DATA_PROVIDER_PARAMETERS.
--Priya

Similar Messages

I just updated to Pages 5.0 and I am writing a document that uses both, Spanish and English...I used to use the inspector to change spelling and languages. How do I do that in this new version?

I just updated to Pages 5.0 and I am writing a document that uses both, Spanish and English...I used to use the inspector to change spelling and languages. How do I do that in this new version?...HELP!!!

jedimaster Master wrote:
how do I do both?
By choosing SET UP for the "automatic" item at the bottom of the list I referred you to earlier

Selecting both static and dynamic values in a report.

Hello,
I am using the following LOV for a select list in a form based on another post (Re: Static and Dynamic LOV ordering
It is presenting five static values along with a dynamic LOV.
select d, r
from (select n, d, r
from (select 1 as n, 'NAME_A' d, 1 r
from dual
union all
select 1 as n, 'NAME_B' d, 2 r
from dual
union all
select 1 as n, 'NAME_C' d, 3 r
from dual
union all
select 1 as n, 'NAME_D' d, 4 r
from dual
union all
select 1 as n, 'NAME_E' d, 5 r
from dual
union all
select 2 as n,
(LNAME || ', ' || FNAME || ' (' ||
to_char(DOB, 'MM/DD/YYYY') || ')') display_value,
ID return_value
from my_name_table)
ORDER BY n, r asc)
The static display and return values do not exist in my_name_table, but the static return values are recorded in my_main_table when the user submits the form.
The tables look like this:
my_main_table:
record_id
name_id
my_name_table:
name_id
fname
lname
How can I present the display values associated with the static return values recorded in my_main_table along with the dynamic display values in a report? I am currently presenting the dynamic portion in a report using the following select statment:
select
(my_name_table.LNAME||', '||my_name_talbe.FNAME) AS Name
from my_name_table
WHERE my_main_table.NAME_ID = my_name_table.NAME_ID
I have the additional problem that the static return values are not in my_name_table so the join in the last statement will not find the static values in my_name_table.
Edited by: mterlesky on Feb 24, 2009 9:51 AM

1. You will need to add an outer join to return all the values in the Main table.
2. Then decode the values for the static LOV.
Something like (this is not tested, but should give you the idea)
select
decode(my_main_table.NAME_ID,1,'NAME_A',2,'NAME_B',3,'NAME_C',4,'NAME_D',5,'NAME_B',(my_name_table.LNAME||', '||my_name_talbe.FNAME)) AS Name
from my_name_table
WHERE my_main_table.NAME_ID = my_name_table.NAME_ID(+)
This will all break if any of your static LOV ID values clash with your dynamic LOV ID values.
I am now going to give you a long lecture about hard coding values ..... ;)
Related info: http://simonhunt.blogspot.com/2009/02/how-to-cope-with-list-of-values-lovs.html
I hope that helps
Shunt

How to achieve the static and dynamic tooltip

I am using jsf 2.0
I need to achieve the static and dynamic tool tip.
can u plz provide me the solution

No we dont have both RichFaces and tomahawk
Edited by: 814412 on 23-Nov-2010 20:55

Is it possible to have a PDF Form that is both static and dynamic?

So I have a form that I need to make that would consist of two different pages. The first being lots of form fields and some simple graphics where the user could use the comment markup tools to draw some simple lines. The second page would be all text and filling out narrative. So the second page being dynamic and being able to expand would be important. The first page would not need to expand at all. Is there any way to do this and still have the form be one file, one document? What about embedding a dynamic form inside of the static form? Such as how you can embed a word document inside of an excel form... I've done some research but I can't tell if this is even possible. Thanks in advance.

Yeah I kinda figured that... Really too bad. Seems lke it should be possible somehow. Anyway, do you all have any suggestions about the best way to combine a static form that is really just text fields and such (that comments and markup tools can be used in) with another page that is sections of narrative that would need to be able to flow?
Or better yet, a way to draw lines on to a form without using the comment and markup function?
I like your idea about connecting two forms - but I need to keep the final product as simple as possible. Once the user fills it out, they would be to be able to submit it and it show up as one file, even if that is just a flat file. I don't expect you all to tell me how to do this, but it would be nice to know its possible before I commit to the project and research. Thanks in advance.

How to fillter both main and detailed reports

Hi im usine 2 reports
main report like productcategory,amount
detailed report like productcategory,probname,id,loc,coun,amount
if i click on main report any value then it open the detailed report and show that particular value details only
im using acion link to to open detailed report with all values
how it
im sunig master detailed but im not get that
plz help me

Hi,
if you want to see all the records in detail report using action link, then remove is prompted filters from the detail report.
Thanks
Edited by: Maqsood Hussain on Dec 5, 2012 9:44 PM

I have an Apple computer, use both Firefox and Safari browsers, use Comcast for my email. Lately, when on Firefox, my email is not functioning properly. Why?

I have an Apple computer, use both Safari and Firefox browsers. I use both Apple mail and Comcast for my email. Lately, when in Firefox, my email does not work properly. I get a message "your servers license has expired". While I can usually access my emails I cannot delete unwanted emails. This problem does not happen when I use Safari and Apple mail. Is this a Firefox issue or Comcast? Do you know what license expiration refers to?

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

How to use both wired and wireless connection with static addresses

Now that I have setup my home network with static addresses (router, mini1, mini2 and PC) in the way I want, (big thanks to BDAqua http://discussions.apple.com/thread.jspa?threadID=1271635&tstart=0) I would like to understand some more advanced network concepts.
I would like to change the network so that I use both the wireless connection and the built-in ethernet connection at the same time in my Mac mini1. I would like to connect my PC to my Mac mini by using the wired ethernet connection so that I reach the Internet from my PC as well. I would also like to be in control of all the addresses therefore I want to assign the addresses manually.
The question: What addresses should I use between mini1 and PC? Should I use the same wireless address space as I already use between the wireless router and the other computers (router: 192.168.1.1, mini1: 192.168.1.101, mini2: 192.168.1.103) or should I use something totally different like 10.X.X.X? What should I put in ethernet connection "Router"-field, the same as in Airport (192.168.1.1)? What about DNS, same as in Airport?

If I understand this correctly, you wish your Mini to perform Internet Sharing for your PC, correct!?
If so you'll pretty much have to let the Mini handle DHCP & NAT on the Ethernet port. You also want to be sure Airport is dragged to the top of Network>Show:>Network Port Configurations, that's what position the Mini will use 1st for Internet itself.
On the Mini turn on both Web Sharing & Internet Sharing. The PC once connected will have the Mini's Ethernet IP as it's Gateway addy.

How to set up both static and DHCP assigned addresses on an AirPort Extreme

I recently bought an AirPort Extreme to replace my failed Cisco/Linksys router.
I am having trouble figuring out how I can configure the Extreme to support the already static IP addresses on my network as well as assign IP addresses via DHCP to a few devices where static IPs are not supported, i.e., work laptop.
Additionally, when DHCP is turned on, are my only options the 10.0, 172.16, and 192.168? What if I am running something like 10.10 or 172.30?
I am far from green when setting up computer networks, but this AirPort Extreme is making me pull my hair out.
BTW, I have access to a number of computers running a number of OSes including Windows XP, 7, and 8, as well as Mac OS X Snow Leopard and Mountain Lion.
The Mountain Lion or Windows 7 machine would be the preferred ones to configure the Extreme. I already have the AirPort Utility software running on them.
Any help would be appreciated.

I have found the 'DHCP Reservations' option on the AirPort Extreme to be buggy. I seem to remember it causing IP conflicts for some reason. I think what I remember is that if the computer with the reservation was off, and the DHCP server then handed out that IP to another DHCP client, then there would be a conflict when the reserved IP computer was turned back on. Maybe it was an issue in ealier versions of the AE or OS X as the case may be, and maybe it's been corrected, but I've never bothered using it agian since the method I describe below has always worked without fail. Also, I'm guessing DHCP Reservations would work fine if one manually enters IPs outside of the DHCP range but in the AE 'DHCP Reservation Setup Assistant' the IP options provided are within the DHCP range which to me makes no sense and increases the potential for IP conflicts.
Here's what I do to setup a mixed environment of static and dynamic IPs on my network. It works like a charm and does not require the DHCP server (beyond the distribution of dynamic IPs to hosts using DHCP).
For machines on my network that are accepting services from the public network, I set them up with static IPs using the 'Manually' option (System Preferences/Network/Ethernet/Configure IPv4). The settings for 'Router' IP address and 'DNS Server' IP address should both be set with your gateway/router LAN IP). Use an IP address below or above the DHCP range of adresses (in AE/Internet/DHCP/DHCP Beginning & Ending Address).
i.e. if my subnet is 10.0.1.1 and my DHCP range is 10.0.1.100 to 10.0.1.150, you could set the static IPs on your local hosts as 10.0.1.x where x = any number from 2 - 99 or from 151 - 200 as an example.
All other machines and devices that do not require static routing are setup as DHCP clients and get a dynamic IP from the AE. To me it's a simpler setup though it might take a little extra time to setup initially.
John

How do you change categories in both transactions and budget report in the personal budget template in Numbers?

How do you change categories in both transactions and budget report in the personal budget template in Numbers?
I am working on both an iPad mini and a MacBook Air.
Whenever I change the category name in the budget report, it does not actually show up in the transactions tab when I am using the Personal Budget Template.
I have already tried copying and pasting a category in the budget report to add another row but it still does not show up in the transactions tab.

Hi golmeda,
Check out this answer here:
Using Numbers Personal Budget template I can't figure out how to change the categories in both tabs (budget and transact…
If it is unclear let me know.
quinn

How can i use both Windows and Mac os at the same time on my iMac

How can i use both Windows and Mac os at the same time on my iMac

You can use Parallels desktop or VM Fusion to run both operating systems at the same time. Both programs work well, but I personally perfer VM Fusion.

Perform static and dynamic check together on a customer?

Hello All,
Is it possible to perform static and dynamic check together on a customer?
I believe standard SAP does not allow both options together.
The scenario is: My client has customer who orders products 1 year in advance and create sales order with a future delivery date. The customer might have balance due on their account which is close to the credit limit. As a result the sale order should be blocked as if the automatic credit check is "Static". This would allow our customer service to call the customer and arrange for the payments.
Then 11 months later, a dynamic check should be performed on the customer to make sure the past due is under the credit limit. If the past due is over credit limit, the sales order must be blocked for delivery as if the credit check was "Dynamic" with 30 days horizon. This would again give our customer service time to settle the payment with the customer.
If anyone has implemented such a scenario, can you please give me an overview of how you did it?
Thanks very much in advance and Text Removed.
With Regards,
AM
Edited by: Lakshmipathi on Nov 13, 2010 9:23 AM
Please dont include this text

Static and Dynamic Cannot be Performed together. They are mutually exclusive events.
Credit check can be performed either at Sale order level or at Delivery / PGI Level.
FCV3 is a good report to see whether a customer would fail a credit check. ( suitable for your customer service )
Coming to your Point , Assuming that the customer is eligible for a Credit of 50 Lacs. Now the Customer has placed an order for 60 Lacs. We set the Customer credit checking at order level . The Customers Sale order would get blocked.
The Customer service will follow up for the payment and see to it that it is made. Assume the customer has made a payment for 70 Lacs.
Now let us have a look at the account statement of the customer.
Account Statement : Customer Cr : 70 Lacs. Dr : 0. ( because no delivery and invoice so far has been made )
So we are supposed to deliver the Material worth value of 60 Lacs.
The First sale order worth 60 Lacs has been unblocked in VKM3. Now at the time of Delivery level why would you want to chekc the Credit limit again ? It has already passed the credit check.
It is not necessary to check credit limit . Because you have already performed the same at the order level.
Now the customer has come again and raised another sale order for 80 Lacs. The System would block him.
The system will never block the Previous delivery which you are, due for delivery to the customer.
If we keep on checking the Credits without delivering we would end up only raising in Sale orders and no Delivery to the Customer at all. The Debit side of his account will always be 0.
So i donot think Static and dynamic is needed . you can go for either Static or Dynamic.

Mixing static and dynamic content in a single outputText value causes NPEs

Hi,
I am having a problem and I'm wondering if it is a result of my error or if this is a bug.
I am mixing dynamic and static content in the value attribute of tags (e.g., outputText). On initial page load, everything works fine. However, if the same view is reloaded (e.g., after a failed validation) I get an NPE from JSF:
[#|2006-10-24T08:49:03.756-0500|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=12;|StandardWrapperValve[Faces Servlet]: Servlet.service() for servlet Faces Servlet threw exception
java.lang.NullPointerException
        at com.sun.faces.el.MixedELValueParser.getNextToken(MixedELValueParser.java:140)
        at com.sun.faces.el.MixedELValueParser.parse(MixedELValueParser.java:123)
        at com.sun.faces.el.MixedELValueBinding.getValue(MixedELValueBinding.java:60)
        at javax.faces.component.UIOutput.getValue(UIOutput.java:147)
        at com.sun.faces.renderkit.html_basic.HtmlBasicInputRenderer.getValue(HtmlBasicInputRenderer.java:82)
        at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.getCurrentValue(HtmlBasicRenderer.java:201)
        at com.sun.faces.renderkit.html_basic.LabelRenderer.encodeBegin(LabelRenderer.java:128)
        at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:683)
        at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:443)
        at com.sun.faces.renderkit.html_basic.GridRenderer.encodeChildren(GridRenderer.java:233)
        at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
        at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
        at com.sun.faces.renderkit.html_basic.GroupRenderer.encodeChildren(GroupRenderer.java:130)
        at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
        at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
        at com.sun.faces.renderkit.html_basic.GridRenderer.encodeChildren(GridRenderer.java:233)
        at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
        at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
        at com.sun.faces.renderkit.html_basic.GroupRenderer.encodeChildren(GroupRenderer.java:130)
        at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
        at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
        at com.sun.faces.renderkit.html_basic.GridRenderer.encodeChildren(GridRenderer.java:233)
        at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
        at javax.faces.webapp.UIComponentTag.encodeChildren(UIComponentTag.java:609)
        at javax.faces.webapp.UIComponentTag.doEndTag(UIComponentTag.java:546)
        at com.sun.faces.taglib.html_basic.PanelGridTag.doEndTag(PanelGridTag.java:460)
        at org.apache.jsp.registration_jsp._jspx_meth_h_panelGrid_0(registration_jsp.java:324)
        at org.apache.jsp.registration_jsp._jspx_meth_h_form_0(registration_jsp.java:223)
        at org.apache.jsp.registration_jsp._jspx_meth_f_view_0(registration_jsp.java:157)
        at org.apache.jsp.registration_jsp._jspService(registration_jsp.java:118)
        at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:105)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
        at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:336)
        at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:297)
        at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:247)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
        at sun.reflect.GeneratedMethodAccessor188.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
        at java.security.AccessController.doPrivileged(Native Method)
        at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
        at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
        at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
        at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
        at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
        at java.security.AccessController.doPrivileged(Native Method)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
        at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:723)
        at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:482)
        at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:417)
        at org.apache.catalina.core.ApplicationDispatcher.access$000(ApplicationDispatcher.java:80)
        at org.apache.catalina.core.ApplicationDispatcher$PrivilegedForward.run(ApplicationDispatcher.java:95)
        at java.security.AccessController.doPrivileged(Native Method)
        at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:313)
        at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:326)
        at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:132)
        at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
        at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:248)
        at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
        at javax.faces.webapp.FacesServlet.service(FacesServlet.java:194)
        at sun.reflect.GeneratedMethodAccessor202.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
        at java.security.AccessController.doPrivileged(Native Method)
        at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
        at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
        at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
        at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
        at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
        at java.security.AccessController.doPrivileged(Native Method)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
        at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
        at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
        at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
        at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
        at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
        at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
        at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
        at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:132)
        at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
        at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
        at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:189)
        at com.sun.enterprise.web.connector.grizzly.ProcessorTask.doProcess(ProcessorTask.java:604)
        at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:475)
        at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:371)
        at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:264)
        at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:281)
        at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:83)My code looks like this:
<h:outputText escape="false"
          value='<link href="#{myBean.styleSheet}" rel="stylesheet" type="text/css" />' />If I replace this with a much more convoluted set of tags, it works:
<h:outputText escape="false"
          value='<link href="' /><h:outputText escape="false" value="#{myBean.styleSheet}"
          /><h:outputText escape="false" value='" rel="stylesheet" type="text/css" />' />So is the problem that I am mixing dynamic and static content with a single value? If so, why does it work on the first view, and not after?
If it matters, I'm using the reference implementation version 1.1 (as included with NetBeans 5.5RC2) on SuSE 10.0 w/ JDK 1.5_09.
Thanks,
Bill

Yes, that's how I originally had it, but then changed it to the outputText approach since a single tag could do what I wanted, as long as I was allowed to mix static and dynamic content within a single value.
I think this is a bug in JSF 1.1, since if what I am doing is illegal, it should throw an exception on the first page view, not work on first view and throw an exception on subsequent views. I'm guessing that this has something to do with the fact that on first page view it only runs the restore view and render response JSF phases, while on subsequent requests all of the phases will be run, and it's in one of those other phases that the exception is thrown.
For now, multiple tags is the work-around, I guess.
Thanks,
Bill

Am I able to use both Carbonite and Time Machine as back-ups for my iMac?

HI,
I have a iMac, and I have recently recently completed the initial back up for Carbonite. I also have a 2TB Seagate external hard drive that I would like to use with Time Machine. I am wondering if I am able to use both Carbonite and Time Machine simultaneously.

Hi, and welcome to the forums.
As bdmarsha says, yes, you can run both simultaneously.
But one caution; there are some reports here that some of the online backup apps keep some fairly large, frequently-changing files on your system. Time Machine will back them up along with everything else, which can take some extra time and space on your TM drive.
After your initial TM backup, see how large the incremental backups are (by watching the progress bar and info on the +Time Machine Preferences+ window). If those seem too large for the changes you've made since the previous backup, see #A2 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum), for a couple of apps that will show exactly what was backed-up.
If you find such things, you can exclude them from TM backups, per #10 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).

HT4818 Can you use both Bootcamp and Parallels with the same Windows 7 installed

I have Parallels installed with Windows 7. Can I use both Bootcamp and Parallels on the same machine depending on whether I just want to work in Windows all day (Bootcamp) or alternate during the same session (Parallels)?

You can, yes. But there is a complication: once you activate windows it will only be activated for one of the two methods you use. So, let's say you install into boot camp and activate windows. You can then install Parallels and it will find your boot camp installation, but when running in Parallels, Windows will report that it is not activated. Or, you can activate it in Parallels and when running in Boot Camp Windows will report that it is not activated. The reason for this is because Windows thinks it is running on different computers depending on how you boot it. This may not be an issue for you if you run Windows a lot one way and just occasionally the other way, so be sure to activate Windows in whichever method you use more often. Hope this helps!

How to use both Static and dynamic Reports in WAD using a single template.

Similar Messages

Maybe you are looking for