How to fillter both main and detailed reports

Hi im usine 2 reports
main report like productcategory,amount
detailed report like productcategory,probname,id,loc,coun,amount
if i click on main report any value then it open the detailed report and show that particular value details only
im using acion link to to open detailed report with all values
how it
im sunig master detailed but im not get that
plz help me

Hi,
if you want to see all the records in detail report using action link, then remove is prompted filters from the detail report.
Thanks
Edited by: Maqsood Hussain on Dec 5, 2012 9:44 PM

Similar Messages

Same Query for both Main and Sub Report

I have a report whichs works but I don't think i'm getting the data to both the Main Report and Sub Report in the most effcient manner... I have a report that totals users call subject counts. But then end user wishes to see all users total counts and the grand totals of call counts on the first page then then the breakdown of types of calls on subsuquent pages... so I created a report with a subreport in the report header.... I use the same query in both the sub and main report... however it asks the user to enter the parameters once for the main report and once for the sub report... Parameters are both the same for each; month and year... so it currently runs the query twice I want to run it once and use the data for both reports... I group by name and then sum the call subject counts for the user totals... and in the sub report I hide the detail section and I'm just left with the sub total line for each user, then in the main report use the same grouping and suming again and I start a new page for every user...
Using CR 9
Thanks for any advice
Vincent

i think you need to link the main report parameter with the subreport parameters inorder to pass the parameter values from main report to subreport. So right click on subreport and go to change subreport links and add parameter fields and select parameter fields from your subreport and un check the databse fields in subreport.
Regards,
Raghavendra.G

How to use both Static and dynamic Reports in WAD using a single template.

Hi,
I have 2 reports - Report1 & Report2. Report1 is a static report with 3 column in it. In WAD user does not want to see the third series in the chart so I have made series3 invisible in the chart.
I am calling the Report2 via 'SET_DATA_PROVIDER_PARAMETERS' in the button option.
Now the issue is that, Report2 is a dynamic report which is using a calyear vaiable range. As Report2 is using the template of Report1, Series3 of Report2 also gets hidden.
Any solution for this?
Thanks
Nisha

Hi Nisha,
After setting the Report 2 DP thru SET_DATA_PROVIDER_PARAMETERS, you can use one more command SET_ITEM_PARAMETERS on the Chart webitem & edit the Series to make it visible. If there is a way to reset the DP back to Report 1, then you must once again use SET_ITEM_PARAMETERS to hide the Series.
Or you can use another Chart webitem for Report 2 DP & make the Chart webitem for Report 1 hidden & the Chart webitem for Report 2 visible using SET_ITEM_PARAMETERS after setting Report 2 DP using SET_DATA_PROVIDER_PARAMETERS.
--Priya

How do you change categories in both transactions and budget report in the personal budget template in Numbers?

How do you change categories in both transactions and budget report in the personal budget template in Numbers?
I am working on both an iPad mini and a MacBook Air.
Whenever I change the category name in the budget report, it does not actually show up in the transactions tab when I am using the Personal Budget Template.
I have already tried copying and pasting a category in the budget report to add another row but it still does not show up in the transactions tab.

Hi golmeda,
Check out this answer here:
Using Numbers Personal Budget template I can't figure out how to change the categories in both tabs (budget and transact…
If it is unclear let me know.
quinn

Hoe top create summary and detail report using ABAP QUERY

Hi ,
Can any one suggest me how to create summary and detailed report using ABAP Quey.
Regards,
Raghu.

Hi,
Table Declaration
tables:mara,mast.
*Declaring the internal table
data: begin of itab_new occurs 0,
      matnr like mara-matnr,     "Material No
      ernam like mara-ernam,     "Material Created by
      mtart like mara-mtart,     "Material Type
      matkl like mara-matkl,     "Material Desc
      werks like mast-werks,     "Plant
      aenam like mast-aenam,     "BOM created
      stlal like mast-stlal,     "Alternative BOM
      end of itab_new.
select-options: p_matnr for mara-matnr.
CODE A : Retrieving the data from the database
     select f~matnr f~ernam f~mtart f~matkl m~werks m~aenam m~stlal
     into table itab_new
     from mara as f inner join mast as m
     on f~matnr = m~matnr
     where f~matnr in p_matnr.
CODE B : Retrieving the data from the database.
    SELECT FMATNR FERNAM FMTART FMATKL MWERKS MAENAM M~STLAL
    INTO TABLE ITAB_NEW
    FROM MARA AS F INNER JOIN MAST AS M
    ON FMATNR = MMATNR
    WHERE F~MATNR = P_MATNR.
    SORT ITAB_NEW BY ERNAM.
loop at itab_new.
write:/5 itab_new-matnr,itab_new-ernam,itab_new-mtart,itab_new-matkl,itab_new-werks,itab_new-aenam,itab_new-stlal.
endloop.
*TABLES: MARA , MAST.
*DATA:BEGIN OF ITAB_NEW OCCURS 0,
             MATNR LIKE MARA-MATNR,
             ERNAM LIKE MARA-ERNAM,
             MTART LIKE MARA-MTART,
             MATKL LIKE MARA-MATKL,
             END OF ITAB_NEW.
   SELECT MATNR ERNAM MTART MATKL
   INTO TABLE ITAB_NEW
   FROM MARA
   WHERE MTART = 'T'
   ORDER BY MATNR ERNAM MTART MATKL.
*DATA: BEGIN OF ITAB OCCURS 0,
     MATNR LIKE MARA-MATNR,
     END OF ITAB.
Thank U,
Jay....

How to populate both key and text in drop down list in dialog prog screen

Hi, Can anyone please advice how to display both key and text in the drop down list in dialog prog screen. I tried with below code. keys and texts are getting populated in values table but only text is appearing when click on drop down. need to display both key and text in the drop down. Thanks in advance.
TABLES: ZRPP_MODELS, ZRPP_FFLSTRATEGY.
TYPE-POOLS : VRM.
DATA : field_id TYPE VRM_ID ,
       values   TYPE VRM_VALUES,
       value    LIKE LINE OF values.
FORM fill_model_list .
select MODEL MODEL_DESC from ZRPP_MODELS into value.
    APPEND value TO VALUES.
endselect.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id     = 'ZRPP_MODELS-MODEL'
      values = values.
ENDFORM.

You need to concatenate KEY & VALUES
wa_values-key = '1'.
wa_values-text = '1 - One'.
append wa_values to i_values.
wa_values-key = '2'.
wa_values-text = '2 - Two'.
append wa_values to i_values.
wa_values-key = '3'.
wa_values-text = '3 - Three'.
append wa_values to i_values.
call function 'VRM_SET_VALUES'
    exporting
      id              = 'LIST_BOX'
      values          = i_values
    exceptions
      id_illegal_name = 1
      others          = 2.
a®

How to print both normal and bold data in a single line

Hi ,
I have requirement wherin the data need to be displayed in a single line.
FAX: Z8525_text.
where FAX needs to be in bold and Z8525_text is a standard text and it shoould not be bold , both of this needs to be displayed in
a single line.
Can you let me know how to print both normal and bold data in a single line one of which is coming fro standard text.
Regards,
Senthil

Hi Senthil,
If you are using smartforms, have a character format created for BOLD and apply it to the text you want to highlight. The remaining text of the line could be applied with a Character format which is not highlighted.
Try and revert in case you need further assistance

How to install database 10g and forms&reports developer 10g?

hi
how to install database 10g and forms & reports developer 10g on windows xp 32 bit? and which one is to install first? how to connect them together? where can i find complete guide

Gul wrote:
hi
how to install database 10g and forms & reports developer 10g on windows xp 32 bit? and which one is to install first? how to connect them together? where can i find complete guideThis link will help you http://tahiti.oracle.com/

PGI for both main and sub items (Sales BOM)

Hello SD friends,
I'm trying to map some BOM scenario.
Only main item should be relevant for princing.
Here's what I've done :
1. Create sales BOM via CS01
2. Maintain item category group ERLA for main item and NORM for sub item MM01
3. Maintain item category TAQ for main item and TAE for sub item VOV4
When I wanna do PGI, system creates material document only for main item.
Which means that PGI has not been done for sub items.
Is there any way to make PGI possible for both main and sub items ??
Regards,
Bahia.

Can you clear, that why you want to issue both Main item/Sub Item, where your pricing is @ main item level.
in Main item level Pricing, Main item itself includes components. Once you issue the main item. from Inventory this main item wil be reduced.
Eg: In Case of Main Item- Computer (Assume Components - Monitor , Keyboard , CPU & Mouse)
Price for Computer - $1200. Component prices individually- $300 , $100, $700, $100 - These prices applicable only when you sell as BOM at Subitem level Pricing Or Seperately )-
In SO: - Order Computer (System explodes Components to verify,which are the subitems consists in Main Item)
DEL:- Components will be copied in Delivery , but not for dispatch (Sch Line Cat:CT has these controls)
Inv: Only Main item will be displayed for print.
NOTE: for your requirement, you can change the Schline Category from CT - CN- which is relevant for delivery with movement type i601 -in SO. Then you can dispatch components & these components will not copied into Invoice ,as they are not relevant for billing.
If you want CN has to determined automatically, maintain Schline Category determination accordingly.
Hope it helps,
Any info, please revert

E-Mail Summary Report and Detailed Report Automatically

Hi, I have just started a new job (1st IT job since leaving college) and I've been told that our Small Business Server 2011 used to email a Summary Report directly to a specified email address, as well as a weekly Detailed Report to the same email address,
but that has stopped sending reports now. How do i make sure that the reports are automatically generated and sent out via email to the specified address. Any help would be great.

Hi,
Based on your description, I understand that there some issue occurred in Report feature in the SBS 2011.
On current situation, please refer to following steps and troubleshoot this issue. Then check if can help you.
1. Login the SBS server. Please open Windows SBS Console and select
Reports tab. In the Reports panel, select a report (Summary or Detailed), then View report properties. In Report Properties page, please select
E-Mail Options to check if had added the correct user account or e-mail address. Also please select Schedule tab, and check if had configured correctly.
2. Then manually click
Generate report option in Tasks. Please check if successfully generated the report. If not, please refer to following TechNet article and repair Monitoring and Reporting features in the SBS server. Then monitor the result.
Repair Monitoring and Reporting Features
in Windows Small Business Server 2011 Standard
3. If generated the report successfully, please manually click
Generate report and e-mail report option in Tasks. Then check if run successfully. Or any error message occurred?
4. If this issue still exists, please refer to following path: C:\Program Files\Windows Small Business Server\Logs\MonitoringServiceLogs and check if there has some log files
which be related to Report (Summary or Detailed). If has, please check if can find some more clues. Meanwhile, please open Event Viewer and check if find some relevant errors. Those may hope us to go further analyze.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

How to print both letter and legal size docs at same time with two trays

I have an HP Laser Jet P2055dn printer. How can I print both letter and legal docs at same time?

Not quite sure what you mean by "print both letter and legal docs at same time".
If you mean that sometimes you want to print a document on Letter size paper, and at other times you want to print a different document on Legal sized paper, then all that is neccessary is to ensure that:
The printer knows what Paper Size (e.g. Letter or Legal) is present in each tray; on many LaserJet devices, the size is detected automaticaly by sensors in each tray (except for the drop-down tray), but some devices may require that you set the size via front panel menus, or (for network models) via the Embedded Web Server equivalent.
You may also need to specify what Paper Type (e.g. Plain or Letterhead) is present in each tray, in order to distinguish between two or more trays which have the same paper size loaded.
Within your appllcation / print preferences, ensure that you select the required combination of size and type for the document.
But if you mean how do you print a document with some pages on one size of paper, and other pages on a different size, this may only be possible with bespoke applications and/or printer drivers.

How to call function in updateable detail report field in apex 4.0

i build a function which calculate the total price of the product by multiply qty* rate
and i build a master detail form i want in the updatable detail report when i give the qty and rate then i call the culculation function and display the result in the field of price. but i don't know where i call the calculation function please help me
Regards
NOMAN RASHAD

In your SQL:
SELECT ename, job, your_function(sal, comm) your_calculation
FROM empDenes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

How to show both SC and Local Currency in PLD at Amount place?

Hi sir,
I want to show both System Currency and Local Currency in PLD at the Amount Place.
And amount in Words also.
When i preview my PLD Report than it show the both SC and LC in Words.
So,plz help me sir.!

Hello jyotasna ,
Docuement total always in one currency depend on selected Customer or Vendor and if you want to in two currency then you should make UDF(User Define Field) for other currency.
also make FMS for calculation in this UDF .
If you want to amount in word in PLD then you should use ,select option Amount in words
for this configuration you should need workaroud.
Thanks
Manvendra Singh Niranjan

Is there a single sever supports both Jdev11 and Froms/Reports to deploy

is there a single server to support both jdeveloper 11 and forms/reports to deploy on web.
We currently have ias 10.1.2, deployed 10g forms/reports on web. we are developing new module in jdeveloper11. Can some one guide us, best way to integrate both? (we also have to implement ldap/sso soon for secuirty reasons)
Thanks
Lalitha

Thanks for the reply.
We have currently IAS 10.1.2 with forms/reports on sun machine.
We also have brand new sum machine for other reasons. Now if we choose to use this new machine to deploy only new module which we developed in Jdev11, what would be the best steps we can take and eventually migrate/transfer old forms/reports modules to new machine.. can you please give your advice?
Thanks
Lalitha

How to change both start and end dates for an business event (or any object

Hi all.
We are in the case to change the validity dates for several business events in training management.
The special point is that both, start and end date, have to be changed.
In example, business event 00000001 is valid from 2010.01.01 to 2010.01.31 and shoud be "moved" from 2010.05.01 to 2010.05.31.
So if i run RHBEGDA0 report to change start date first, it doesn't work propperly because new start date is bigger than old enddate.
Next thing we thought is to change end date first, using RHGRENZ1, and then change the start date, with the report RHBEGDA0. Problem with this solution is that a business event duration shoud be calculated taking care of free days (weekends and day ofs).
Is there any better solution for this?
Thanks in advance for your help.
Best regards.

Hi,
I gueass the best solution is to use PV1A t-code.
You can write an LSMW for this t-code if the number of business events to be maintained is huge.
Regards,
Dilek

How to fillter both main and detailed reports

Similar Messages

Maybe you are looking for