How to use CooCox software(CoBuilder+CoDebugger+CoFlash) to develop application program using

1、Install JAVA platform and GCC compiler.
eg:
jdk-6u2-windows-i586-p.exe
arm-2009q3-68-arm-none-eabi.exe
website:
https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_Developer-Site/en_US/
-/USD/ViewProductDetail-Start?ProductRef=jre-6u16-oth-JPR@CDS-CDS_Developer
http://www.codesourcery.com/sgpp/lite/arm/portal/release1033
2、Download CoBuilder,CoDebugger,CoFlash and Colink Plugin.(four packages).
3、Using CoBuilder create project and build it.
4、Download the bin file to the target by using colink and coflash.
Note:using coflash to download the bin file,you must in Command Line mode.
5、Then,you can debug the project using CoDebugger.(open the CoDebugger,import the project you
created just now, and debug it)
www.coocox.org

       Yes. They are all developed by Eclipse.
       CoBuilder provides a completely free and highly automatical integrated development environment for the application based on ARM Cortex M3. It integrates plenty of drivers and components for users, so users can fully concentrate on the development of application software.
       It support devices:
ATMEL
ST
NXP
Luminary
AT91SAM3U4E AT91SAM3U4C AT91SAM3U2E AT91SAM3U2C AT91SAM3U1E AT91SAM3U1C
STM32F103VB,STM32F103V8 STM32F103T8, STM32F103RB STM32F103R8,STM32F103CB
STM32F103C8
LPC1768, LPC1766 LPC1765, LPC1764 LPC1758, LPC1756 LPC1754, LPC1752
LPC1751
LM3S811 LM3S8962 LM3S9B96
www.coocox.org

Similar Messages

We have a corporate iPad in our auto showroom to show guests how to use features on their vehicles. Someone locked it with their account. It was not an employee. How can I get in? I did a restore of the software already?

We have a corporate iPad in our auto showroom to show guests how to use features on their vehicles. Someone locked it with their account. It was not an employee. How can I get in? I did a restore of the software already?

Gather up the proof that the dealership is the original purchaser of the iPad,
and take the iPad & that proof to a physical Apple store for possible assistance.
It is highly suggested that you make a genius bar appointment to avoid delay
at the store:
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
If no Apple store close by, get the information mentioned above and contact
Apple Contact Us for assistance.
Once the problem is resolved, you may wish it use Guided Access to limit
what customers can do with the iPad.
iOS: About Guided Access - Apple Support

I am fairly new to using Mac computers, I would like to know how to uninstall drivers, software and other things I might install on my computer. With a PC it's really easy, you just go to the control panel.

I am fairly new to using Mac computers, I would like to know how to uninstall drivers, software and anything else I may install on my computer. With PC it's very easy, you go the control panel, locate what you want to uninstall and with a few clicks it's done. Can someone please help me? Thank you.

See these:
Switching from Windows to Mac OS X,
Mac Basics—Tutorials on using a Mac,
Mac OS X keyboard shortcuts,
Apple How-To Guides for Mac OS X,
Anatomy of a Mac,
MacTips,
Switching to Mac Superguide, and
Switching to the Mac: The Missing Manual, Mavericks Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.

Virtual Machine( VM WARE) using Windows Server 2008 R2- how to install a software from host to guest.

Dear All,
Can you Please tell how to install a software SQL Server 2012 from the Host to my Guest OS Windows Server 2008R2 in my Virtual Machine? I am using VMPlayer and have already created a VM using the Windows Server 2008R2.
I just need help in installing another software (SQLServer2012) from my laptop(guest computer) to my host VM. I also have the files downloaded into my C drive of my laptop(hostcomputer) for the SQL Server 2012. But I am lost as to where to click to install
this software to my VM.
I know I put into Windows Server 2012 forum but I thin the procedure should be similar.
Thank-you

there are few options,
you can copy the files from your host to virtual machine
you can create a iso file and mount it to vm
you can share the source files and access as a share
Darshana Jayathilake

How to use webdynpro abap? need separate software? or please help me.. :-)

How to use webdynpro abap? need any separate software? if no, please help me with Transaction Codes..
Thanks in Advance
-Parthi
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on Oct 19, 2011 8:18 PM

I don't think you quite understand how hibernation mode works.
"The state of a computer is stored into its main memory, which is also called RAM. When a
computer is powered off, the contents of this memory are irremediably wiped out. Hiberna-
tion works in the following way: before being powered off, the computer saves all the con-
tents of the memory to a ﬁle on the hard disk drive. On wake up, data stored in this ﬁle is
read out and restored to the memory. Therefore, the RAM contents are the same before
and after the hibernation process, and the state of the computer is also the same. The
saved ﬁle is named sleepimage, and is located in the /private/var/vm directory. Hi-
bernation is sometimes also called “software suspend” or “suspend to disk”.
The default suspension feature of Mac OS X, called sleep works in a different way. When
entering sleep, every subsystem of the computer is shut down, except the main memory
which is still powered. This process preserves the contents of the memory, and allows the
computer to wake up quickly. However, a sleeping computer still consumes a small
amount of power. Sleep is sometimes also called “hardware suspend” or “suspend to
RAM”.
Apple introduced the safe sleep feature in Mac OS X 10.4.3 for the Powerbook HD line of
laptops. This feature is a variation of the default suspension behavior. The main memory is
still powered during the sleep, but the contents of the memory are also saved to the disk at
the beginning of the operation. The saved ﬁle will only be used if the laptop runs out of bat-
tery power while sleeping, in order to restore the original state of the computer.
This safe sleep feature is what makes hibernation possible in Mac OS X 10.4.3 and above."
Quoted from *Deep Sleep v. 0.7 documentation*
Matthieu Beaumel, 10/03/2006

How to use Dashboard as a cut & paste software

Hi !
I´ve hard to understand the function of "Dashboard" - I thought that the software could be a help for me to cut/copy pictures on websites for an example - I thought that I could mark an area on a site, copy the are and save it to iPhoto or copy it to Pager or other programs but it didn´t work that way. So now I´m looking forward to get an introduction in "how to use Dashboard" from someone who knows more about Mac and the programs than I do.
Best regards / Marlene

Dashboard exists to display the various widgets such as clocks, weather or Stock Market info, dictionary, etc.etc.
You don't need it for what you want to do. Most pictures on websites can be saved simply by dragging them to the Desktop - try it with the picture on the right. Otherwise, hit command-shift-4 and click drag the mouse over the area you want to save: an image will be saved to your Desktop.

How to use Qosmio F50 Quad core HD Processor in other software

I would like like to know how to make use of the quad core processor in other programs besides Toshiba Upconvert, Transcoding, Face Navigation and Gesture Control functionality. Anybody has any clue? Thanks!

cklow01 has right.
how to use this hd processor with other programm , new program with blueray support for video. because dvd movie factory 5 sold with qosmio is older but oprimised for this processor.
otherwise we are with an up to date notebook with old, very old software !!

Where do I find help on how to use a software?

Recently I've purchased a ZIP software through App Store - (Smart Zipper Pro). I have never used one of these programs and now have a large file to send to a customer. I found no customer support nor directions on the use of it.
I will appreciate there is someone that could help me understanding how to use this software. I have tried different alternatives but files seems to have the same size as the original. There is no compression.
Your help on this subject will be greatly appreciated.
AntaresPower

have a large file to send to a customer.
*Some suggestions regarding sending large files:*
If you both have High-speed connections, the easiest & fastest way is through Dropbox.
I send all my large/huge files this way instead of using email.
iChat has the same ability of transferring large files as Dropbox but is slower.
Adium has file transfers.
Yahoo Messenger has file transfers.
If you must use email, check out YouSendIt and TransferBIGFiles for large & small file transfers.
MediaFire is another file transfer site.
Care to share which OS you are using?

How to use MacBook pro with ERP software like SAP B1

We are using Sap B1 how to use with MacBook pro, it is easy with PC to set up.

Please contact the developer. Some ERP's write Mac clients. Some require you to run the Windows client in Parallels. The software we used had a lame Mac client, missing about 80% of the features I needed (like running gross profit reports by product line...really lame). So, I just ran the client in Parallels desktop. I could run a VPN connection from my Mac to our server if I was out of the office, and Parallels picked it up, and told the ERP client that it was a secure connection. Worked well. Our IT guy was able to set it up without too much assistance from the software developer, who charged $100/hour for these things.

How to using the executable software in Java

I got a software named: pdf to text convertor; which can format the text interface from the pdf, for example, you need add the page number with a4 paper, then the convertor can change the pdf into text with page numbers. it is running on the doc, the command like: c:\pdfconvertor\xpdfrc.exe "c:\filename\name.pdf", after the text file will exist in the same directory with the pdf file.
so my problem is how to use java to call this DOS command to execute the program, and then java can read the text file, does some one give me some idea? better with simple java code!! Thanks very much! I will pay dollar for the solutions

You can use:
String[] cmd = {"c:\\pdfconvertor\\xpdfrc.exe", "c:\\filename\\name.pdf"};
Process p = Runtime.getRuntime().exec(cmd);Wait for the process to finish:
p.waitFor()and do your thing with the output file.
Note there are mechanisms for capturing the input and output of the subprocess; see java.lang.Process javadoc.

I got a software license crtificate ,how to use it??? i paied for it.

I got a software license crtificate ,how to use it??? i paied for it.

Which program, and where did you buy?
Do you have a redemption code?
Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

Hi yesterday i downloaded a software from i tunes for keyboard short cut and i don't know how to use them and install them, how to use keyboard shorts bought from i tunes

hi yesterday i downloaded a software from i tunes for keyboard short cut and i don't know how to use them and install them, how to use keyboard shorts bought from i tunes

You can install it on your iOS device (iPad, iPhone, iPod Touch) either by redownloading it directly on the device via the Purchased tab in the App Store app on it, or by connecting the device to your computer's iTunes and syncing it to it.
Syncing apps from a Mac : iTunes 11 for Mac: Sync and organize iOS apps
from a PC : iTunes 11 for Windows: Sync and organize iOS apps
As to how to then use the app, if the description on the app's description page in the store doesn't describe how to use it in enough detail, then is there a link to the developer's website on its description page, and does that have details ?

Hi, i am from india, im using iphone3gs with ios5.1.1 .i want to update the same to ios6 or to ios7,but i couldnt find the software update option in my iphone,so plz help me how to update my software.

hi, i am from india, im using iphone3gs with ios5.1.1 .i want to update the same to ios6 or to ios7,but i couldnt find the software update option in my iphone,so plz help me how to update my software.

Are you sure it's a 3GS? What is the model number?

How do i downgrade software so i can use after effects cc

I updated my mac to osx mavericks, from mountian lion and the after effects cc 12.0 isn't running on this software can you please help with this and tell me if I an fix it strait away and how?

To learn how to use it type C4D in the search help field at the top right corner of AE and follow the links or create a new comp and then go use File>new>cinema 4d project and poke around in the dark until you research some tutorials.

How to use orinda Software generated classess

hai all,
iam newly useing jdev any body tell me how to use orinda generated classes. can send me sample code for this & can u tell me what is use of this.

OrindaBuild examines your data dictionary and generates Java source code to run your PL/SQL procedures and Functions.
It can also generate Java to run any SQL statement you give it. The generated code does not require SQLJ.
General documentation can be found here:
http://www.orindasoft.com/public/Docstwo.php4
An example can be found here:
http://www.orindasoft.com/public/Exampletwo.php4
Say you have a PL/SQL package you want to access using JDBC:
CREATE OR REPLACE PACKAGE complex_example AS
TYPE city_pair_plsql_record IS RECORD (from_city flights.departure_city%type
                                      ,to_city   flights.arrival_city%type);
PROCEDURE flies_between_all (p_first_city_pair in city_pair_oracle_type
                            ,p_second_city_pair in city_pair_plsql_record
                            ,p_third_city_from in airports%ROWTYPE
                            ,p_third_city_to    in airports%ROWTYPE
                            ,p_airline_list     out simple_examples.airline_refcursor_type);
PROCEDURE get_table_of_flights_from (p_city         in     flights.departure_city%TYPE
                                    ,p_flights_from    out flights_table);
PROCEDURE add_bookings (p_customer       in     customers%ROWTYPE
                       ,p_booking_table in     bookings_table
                       ,p_status_message    out varchar2);
END;OrindaBuild would generate code like this:
package com.mycompany.myproject.generated;
import com.orindasoft.pub.CSException;
import com.orindasoft.pub.OracleResourceUser;
import com.mycompany.myproject.generated.plsql.*;
* WSDL Compatible Web Services Interface used by classes generated by OrindaBuild
* Generated by OrindaBuild 5.0 build 2342 at 2007/01/19 18:02:18 GMT
public interface DAOFactoryServiceInterface
public com.mycompany.myproject.generated.plsql.SimpleExamplesAirlineRefcursorTypeAttrs[]
servicePlsqlComplexExampleFliesBetweenAll
    (CityPairOracleTypeAttrs paramPFirstCityPair
    ,ComplexExampleCityPairPlsqlRecordAttrs paramPSecondCityPair
    ,AirportsAttrs paramPThirdCityFrom
    ,AirportsAttrs paramPThirdCityTo) throws DAOFactoryServiceException;
public FlightsTypeAttrs[] servicePlsqlComplexExampleGetTableOfFlightsFrom
    (String paramPCity) throws DAOFactoryServiceException;
public String servicePlsqlComplexExampleAddBookings
    (CustomersAttrs paramPCustomer
    ,BookingsTypeAttrs[] paramPBookingTable) throws DAOFactoryServiceException;
} // Generated by OrindaBuild 5.0                                                 The rest of the generated code for this example is available here:
http://www.orindasoft.com/public/Java2HTML
As you can see from the code above each procedure in the package is called by a method in the generated code. OrindaBuild is really useful is situations where the PL/SQL has complicated parameters.
David Rolfe
Orinda Software
Dublin, Ireland
null
null

How to use CooCox software(C​oBuilder+C​oDebugger+​CoFlash) to develop applicatio​n program using

Similar Messages

Maybe you are looking for

How to use CooCox software(CoBuilder+CoDebugger+CoFlash) to develop application program using