How to use formula variable to calculate the days for a document.

Hi expert.
I have a question, I need to calculate how many days it cost for a document, therefore , it should be like this,
cost days = clearing date - creation date..
how can I implement this calculated key figure by formula variable..
Here cost days should be a key figure, but the clearing date and creation date are the characteristics in the document.
it seems that formula variable by replacement path can not be used, do I have to use the customer exit for this variable ??
any other good ways to calculate the cost days (beside during the data loading or by virtual key figure).
I just want to implement this in the query designer..
Please give a detailed steps if you could, thanks a lot.

Hi,
These steps below are for the query designer in BI 7.0:
1. First create a Formula in the Columns.
2. Edit the formula, in the "Available Operands" see for the "Formula Variable".
3. Right Click on the "Formula Variable" folder and then create a new variable.
4. Edi the Formula Variable in the edit screen provide the Description and Technical name; select the processing by as Replacement path.
5. In the reference characteristic select your characteristic "Creation Date".
6. Save the variable.
7. Select the variable into the formula and name the formula as Creation Date.
Repeat the Same steps for the "Clearing Date".
Then create another formula for the Cost days in which you mention as Clearing date (Formula) - Creation Date (Formula).
Hope your issue is solved...
Regards,
Ravi Kanth

Similar Messages

How to use one variable as a default value for another variable?

Hi Experts,
Is it possible to use one variable as a default value for another variable?
For example:
Variable 1 = current calendar year month
Variable 2 = mandatory input ready variable for calendar year month
I want to use variable 1 as default value for variable 2, but also have the ability to change the month if required.
Thanks!
Kathryn

u can use replacement path variable
in that case u can replace the values of 1 variable with the another variable...
but u cannot do this setting
u cannot make variable 2 as mandatory
u cannot enter value for variable 2
because by default it will take the value of variable 1
u have to make follow settings
variable 2
name , technical name
processing by = replacement path
infoobject = ocalmonth
next tab
replaced by another variable
variable name
offset start , offset lenght
save and hit okey

How to calculate the amount for cleared documents.

Hi Experts,
I am working on a program and here i need to display the amount for the cleared document.
I have a scenario where there are two financial document related to a single cleared document.
I can get the amount for financial document from BSAK by passing the BELNR value of the financial document and confirm if it is a clearing document by comparing AUGBL value of BSAK with document number of cleared document.
Actually i am not very clear about the process flow of clearing document.
If anyone can explain me the same.

Hello,
Go through this links it will help full
http://help.sap.com/saphelp_sbo2004c/helpdata/en/fd/25f4c6d8888e40a521972d0be5d68b/content.htm
http://help.sap.com/saphelp_45b/helpdata/en/e5/0783e84acd11d182b90000e829fbfe/frameset.htm

How to use formula variable in customer exit

Hi all,
I just want to use formula varible in customer exit
For eg,
I have created formula variable with user manual lnput eg: ZFM_V01 = 30
Another char variable with user manual input eg: 0keydate = 28/02/2011
Required output,
I just want to read my ZFM_V01 value in customer exit
Result = 0KEYDATE - ZFM_V01
EG:
result = 28/02/2011 - 30
Required result = 29/01/2011
Kindly guide me how u get formula varibale value into customer exit(CMOD) and find the required result. please help me.
Thanks & Regards,
R. Saravanan

Sorry, Bhanu,Ashwin need more info
As my understand ::
Function module RSW_CURRENCY_TRANSLATION uses the following parameters
Import parameters
I_CTTNM : Currency translation key (optional)
I_AMOUNT: Amount in source currency (not optional !!) (data type: floating point !!)
I_SCUR : Source currency (optional) I_TCUR : Target currency (optional)
I_TIME_IOBJVL : InfoObject for determination of the time reference (optional)
I_SCUR_IOBJVL : InfoObject for determination of the the source currency (p.eg. 0COMP_CODE) (optional)I_TCUR_IOBJVL : InfoObject for determination of the the target currency (p.eg. 0COMP_CODE) (optional)
I_PERIV : Fiscal year variant (optional)
I_RATE : Exchange rate (optional)
Export parameters
E_AMOUNT : Amount in target currency (data type: floating point !!)
E_RATE : Exchange rate
E_SCUR : Source currency
E_TCUR : Target currency
I created a Currency key(ZXX) which takes CAD and converts to GBP on Planned Exchange rate (P) with time reference 0CALMONTH.
In my case :
Currency Key : ZXX (Confused here)
Source Curr :CAD
Target Curr :GBP
I need a Variable ,which takes time reference and gives back the exchange rate .
,,I am I missing some thing ?
Sudh

How to use System Variable SY_ROW in the Process Instruction Category

Hi ,
I want to assign a value of System variable SY_ROW to a Normal Variable in the Process Instruction Category and use it in the formula. Please help me with the Syntax in the Process Instruction Category to get the System Variable: SY_ROW value into a Variable.
Thanks,
SV

Hello,
You can use these variables in formulas or, for example, to pass on certain pieces of information to a function module. How the function called by the function module behaves depends on the type of information passed on.
SY_ROW is used to view the current Table line.
Please look into the below link for more details on syntax :
http://help.sap.com/saphelp_46c/helpdata/en/1a/514e38493e4774e10000009b38f889/frameset.htm
http://help.sap.com/saphelp_470/helpdata/en/1a/514e38493e4774e10000009b38f889/frameset.htm
Hope the information is helpful
Regards

How to use a variable to specify the color when setting an attribute

Hi
We are using BI Publisher (XDO) embedded in e-Business Suite. So we are effectively on version 5.6.3.
I would like to conditionally set the background-color attribute of cells in a table by using a variable reference; something like this (the ways in which I have tried):
<?attribute@incontext:background-color;$exEmpBGColor?>
<?attribute@incontext:background-color;'{$exEmpBGColor}'?>
The 'standard' way of doing this would be:
<?attribute@incontext:background-color;'#CCCCFF'?>
Can anybody please help? (i.e. is this even possible?)

Thanks that works.
I was using a variable, so I adapted your example to use the variable, not an element.
<xsl:attribute xdofo:ctx="block" name="background-color"><xsl:value-of select='$exEmpBackgroundColour' /></xsl:attribute>
Regards

How to use progress indicator which block the user for editing ?

Hi All,
I have a requirement where i need to show a round progress bar while processing to the database.For example :- I have a bounded taskflow and inside it I have a two jspx page called as "First.jspx" and "Second.jspx".And i have two textboxes and one "Save" button on first.jspx page.
Now when user puts the values in the textboxes and hits the "Save" button , my ticker or progress indicator should say "Please wait while processing" and as soon as the transaction is complete , i need to show another page which is "Second.jspx" page. "Save" button action has method inside a managed bean which has some functionality and then it executes the VO(View Object) and commits the data.
How should i implement the indicator?
I have read this article :- http://www.oracle.com/technetwork/developer-tools/adf/learnmore/42-progressbarcolor-169184.pdf but it doesn't fit to my requirement.I need indicator which holds the user to edit anything on the page.Like what we get when we do any transaction in banks while navigating to payment gateway.
Please suggest!!!
Thanks and Regards,
Shah

Hi Shah,
The answer was around the same are that you were looking into. http://www.oracle.com/technetwork/developer-tools/adf/learnmore/27-long-running-queries-169166.pdf but the sample was the 27.
- Juan Camilo

How can use a variable in the folowing code?

How can use a variable 'W_ROWNUM2' in the folowing code?
MOVE '1' TO CNT.
LOOP AT L_T_PM2.
              CONCATENATE '0' CNT INTO W_ROWNUM2.CONDENSE W_ROWNUM2.
               CONCATENATE 'F110V-VARI'W_ROWNUM2'(01)' INTO FLD2.
    perform DYNPRO_FIELD       using FLD2
                                 L_T_PM2-vari12_con.
               CNT = CNT + 1.
               CONDENSE CNT.
ENDLOOP.
I need to increment the value of W_ROWNUM2.
Please ,it is urgent!!

Hello
CONCATENATE 'F110V-VARI'W_ROWNUM2'(01)' INTO FLD2.
Try using spaces between parts of the resulting string.
CONCATENATE 'F110V-VARI' W_ROWNUM2 '(01)'   INTO FLD2
Regards
Greg Kern.

Find the 'DAY' for a given 'DATE'

Hi Folks,
I need a help regarding finding the day for a given date.
My requirement is that..,
If I enter a date using 'parameters', it should write the 'day' for the corresponding date.
To be more specific.....,
if I enter date as ' 07/15/2008 ' it should return me the day as 'Tuesday'.
Regards,
Naveen G

HI,
FM LIST WITH RESPECT TO DAY, WEEK, AND MONTH.
CALCULATE_DATE : Calculates the future date based on the input .
DATE_TO_DAY : Returns the Day for the entered date.
DATE_COMPUTE_DAY : Returns weekday for a date
DATE_GET_WEEK : Returns week for a date
RP_CALC_DATE_IN_INTERVAL : Add days / months to a date
MONTHS_BETWEEN_TWO_DATES : To get the number of months between the two dates.
END_OF_MONTH_DETERMINE_2 : Determines the End of a Month.
HR_HK_DIFF_BT_2_DATES : Find the difference between two dates in years, months and days.
FIMA_DAYS_AND_MONTHS_AND_YEARS : Find the difference between two dates in years, months and days.
MONTH_NAMES_GET : Get the names of the month
WEEK_GET_FIRST_DAY : Get the first day of the week
HRGPBS_HESA_DATE_FORMAT : Format the date in dd/mm/yyyy format
SD_CALC_DURATION_FROM_DATETIME : Find the difference between two date/time and report the difference in hours
L_MC_TIME_DIFFERENCE : Find the time difference between two date/time
HR_99S_INTERVAL_BETWEEN_DATES : Difference between two dates in days, weeks, months
LAST_DAY_OF_MONTHS : Returns the last day of the month
DATE_CHECK_PLAUSIBILITY :Check for the invalid date.
Reward points if useful,
siri

How to use bind variables in the following query

CREATE OR REPLACE PROCEDURE MMDB.test IS
sel_qtn VARCHAR2 (10);
CURSOR PT_QUANTITY IS select * from mmdb.product_tree WHERE QUANTITY_CHECK ='E'
AND run_id = 100
a PT_QUANTITY%ROWTYPE;
BEGIN
FOR i IN PT_QUANTITY
loop
sel_qtn := i.quanttity-1;
While sel_qtn>=1
loop
insert into mmdb.product_tree (BILLING_ACCOUNT_NO ,S_CODE) values (i.BILLING_ACCOUNT_NO ,i.S_CODE||'E');
sel_qtn :=sel_qtn -1;
End loop;
commit;
end;

Don't duplicate threads: How to use bind variables in the following query

[svn:fx-trunk] 10545: Make DataGrid smarter about when and how to calculate the modulefactory for its renderers when using embedded fonts

Revision: 10545
Author:   [email protected]
Date:     2009-09-23 13:33:21 -0700 (Wed, 23 Sep 2009)
Log Message:
Make DataGrid smarter about when and how to calculate the modulefactory for its renderers when using embedded fonts
QE Notes: 2 Mustella tests fail:
components/DataGrid/DataGrid_HaloSkin/Properties/datagrid_properties_columns_halo datagrid_properties_columns_increase0to1_halo
components/DataGrid/DataGrid_SparkSkin/Properties/datagrid_properties_columns datagrid_properties_columns_increase0to1
These fixes get us to measure the embedded fonts correctly when going from 0 columns to a set of columns so rowHeight will be different (and better) in those scenarios
Doc Notes: None
Bugs: SDK-15241
Reviewer: Darrell
API Change: No
Is noteworthy for integration: No
tests: checkintests mustella/browser/DataGrid
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-15241
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/DataGrid.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridBase .as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridColu mn.as

Hi Matthias,
Sorry, if this reply seems like a products plug (which it is), but this is really how we solve this software engineering challenge at JKI...
At JKI, we create VI Packages (which are basically installers for LabVIEW instrument drivers and toolkits) of our reusable code (using the package building capabilities of VIPM Professional). We keep a VI Package Configuration file (that includes a copy of the actual packages) in each of our project folders (and check it into source code control just as we do for all our project files). We also use VIPM Enterprise to distribute new VI Packages over the network.
Also, as others have mentioned, we use the JKI TortoiseSVN Tool to make it easy to use TortoiseSVN directly from LabVIEW.
Please feel free to contact JKI if you have any specific questions about these products.
Thanks,
-Jim

How to calculate the measure for the next month using the AGO Function

Hi,
I need to calculate the measure for the current month and the next month.
Can anyone please let me know the syntax to use AGO function for the above requirement.
Regards,
Ambika Nanda.

Hi.
You can also use Oracle analytic functions LAG and LEAD inside the EVALUATE obiee function. The second one will give you the next measure.
For example the report is:
TIMES.CALENDAR_MONTH_DESC
SALES.AMOUNT_SOLD
LAG column: EVALUATE('LAG(%1, 1) OVER (ORDER BY %2)' AS DOUBLE, SALES.AMOUNT_SOLD, TIMES.CALENDAR_MONTH_DESC)
LEAD column: EVALUATE('LEAD(%1, 1) OVER (ORDER BY %2)' AS DOUBLE, SALES.AMOUNT_SOLD, TIMES.CALENDAR_MONTH_DESC)
And the result is:
CALENDAR_MONTH_DESC--------AMOUNT_SOLD--------LAG--------------LEAD
2000-01----------------------------------8025513.84---------------------------8474475.88
2000-02----------------------------------8474475.88----- 8025513.84-----7439568.24
2000-03----------------------------------7439568.24------8474475.88-----7062040.48
2000-04----------------------------------7062040.48------7439568.24-----7497971.40
Regards
Goran
http://108obiee.blogspot.com

Using Formula variable in a key figure formula

Hi Expert,
Can anyone tell me how to use a formula variable to pass the fiscal year variable value (with offset values define in different columns) to the be used in the formula (if statements)?
Currently, I create a formula variable using replacement path from the fiscal year reference object and key but it's not pull the correct value. I'm not sure what's the difference between the different objects i.e. key, external char key value, attribute value etc.
Please give me some lights.
Thanks!

Hi Janice,
From Standard SAP Help
http://help.sap.com/saphelp_nw70/helpdata/EN/43/565cd22fc95f6ce10000000a1553f6/content.htm
Don't want to sound rude, but please search the Forum and SAP Hel before posting a thread, it helps everyone.
Thanks
CK

How to calculate the compliance for an software update deployment

Hi All,
I am trying to find as how do we calculate the compliance for an software update deployment.
Scenario, We have about 4000 machine in the domain. but we have some stale records in the domain which is about 1200. The AD cleanup for the stale records is planned for sometime in March.
So total number of machines in a collection (including the stale machines) are 5200.
The current compliance of that deployment shows the following status:
Complaint : 1156
In Progress : 1724
Error : 38
Unknown : 2462
And in the unknown, we have :
Client check failed/Active: 2
Client check failed/Inactive: 6
Client check passed/Active: 732
Client check passed/Inactive: 1722
Can you please suggest in understanding the formula that should be followed to get the compliance.

Your Compliancy, should be based solely off of the number of computers within CM12.
There are no “if”, “and” or “but” able it. This is the only way to truly and reliably provide numbers to management.
Again it should be very simple calculation:
(Total outstanding Security SU, Total outstanding
Critical SU, Total outstand Service packs, Total outstand Update Rollups, Total outstand Updates, Total outstand Definition Updates, Total outstand tools, Total outstand Feature packs) Vs Total applied SU (all Classifications)
Or
Total # of 100% patched PCs vs Total # of PCs as seen by CM12.
If you use any other calculation then you MUST include a disclaimer that you are filtering out computers because they might be invalid. Or you MUST define exactly how you are calculating the number. Therefore any compliancy rate that your calculate maybe
invalid too or at least it will change once you clean up AD.
I will never hide low compliancy numbers to management, I will always show it to them.
In many case I will ask to give a presentation to Management to explain why the numbers are so low.
Provide them with a list of action items that need to be done in order to bring up the number to more reasonable level. I also set their expectation on what a reasonable level is.
100% is unachievable; there is no exception to this!
95-99% Very excellent but expect to spend lots of $$$s to obtain these percentages.
90-95% is really, really, good; expect to spend $$s in this range.
85-89% is good; expect to set strict procedures
81-84 is ok but you could do better
Below 80% is bad
In your case, I would start by saying AD is dirty and need to be clean up, this has been schedule for March 2015. I would follow up this to say, in order to keep AD clean the follow procedures need to be define / updated / followed. You should also define
exactly what you are doing to ensure that all computers are management by CM12.
IMO these is no simple answer of this.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

How to calculate the unit for RATE?

Hey All,
I am not sure if there is something standard for this or not.
I am calculating the 'Rate' by using 'Value/Amount' and 'Quantity' as follows -
Rate == Value / Quantity
I need to calculate the unit for the rate as below -
Rate unit == Value unit (Currency) / Quantity unit (Base_uom)
(for example -
if value is 1000 USD and quantity is 10 TO then Rate should come out as 100 USD / TO)
Could anyone please suggest how to calculate the unit in this case?
Many Thanks!
Tanu

Hi,
Go through the below link it may give some idea
http://help.sap.com/saphelp_nw04/Helpdata/EN/19/1d7abc80ca4817a72009998cdeebe0/content.htm
Regards,
Marasa.

How to use formula variable to calculate the days for a document.

Similar Messages

Maybe you are looking for