How to use System Variable SY_ROW in the Process Instruction Category

Hi ,
I want to assign a value of System variable SY_ROW to a Normal Variable in the Process Instruction Category and use it in the formula. Please help me with the Syntax in the Process Instruction Category to get the System Variable: SY_ROW value into a Variable.
Thanks,
SV

Hello,
You can use these variables in formulas or, for example, to pass on certain pieces of information to a function module. How the function called by the function module behaves depends on the type of information passed on.
SY_ROW is used to view the current Table line.
Please look into the below link for more details on syntax :
http://help.sap.com/saphelp_46c/helpdata/en/1a/514e38493e4774e10000009b38f889/frameset.htm
http://help.sap.com/saphelp_470/helpdata/en/1a/514e38493e4774e10000009b38f889/frameset.htm
Hope the information is helpful
Regards

Similar Messages

How to use formula variable to calculate the days for a document.

Hi expert.
I have a question, I need to calculate how many days it cost for a document, therefore , it should be like this,
cost days = clearing date - creation date..
how can I implement this calculated key figure by formula variable..
Here cost days should be a key figure, but the clearing date and creation date are the characteristics in the document.
it seems that formula variable by replacement path can not be used, do I have to use the customer exit for this variable ??
any other good ways to calculate the cost days (beside during the data loading or by virtual key figure).
I just want to implement this in the query designer..
Please give a detailed steps if you could, thanks a lot.

Hi,
These steps below are for the query designer in BI 7.0:
1. First create a Formula in the Columns.
2. Edit the formula, in the "Available Operands" see for the "Formula Variable".
3. Right Click on the "Formula Variable" folder and then create a new variable.
4. Edi the Formula Variable in the edit screen provide the Description and Technical name; select the processing by as Replacement path.
5. In the reference characteristic select your characteristic "Creation Date".
6. Save the variable.
7. Select the variable into the formula and name the formula as Creation Date.
Repeat the Same steps for the "Clearing Date".
Then create another formula for the Cost days in which you mention as Clearing date (Formula) - Creation Date (Formula).
Hope your issue is solved...
Regards,
Ravi Kanth

How to use a variable to specify the color when setting an attribute

Hi
We are using BI Publisher (XDO) embedded in e-Business Suite. So we are effectively on version 5.6.3.
I would like to conditionally set the background-color attribute of cells in a table by using a variable reference; something like this (the ways in which I have tried):
<?attribute@incontext:background-color;$exEmpBGColor?>
<?attribute@incontext:background-color;'{$exEmpBGColor}'?>
The 'standard' way of doing this would be:
<?attribute@incontext:background-color;'#CCCCFF'?>
Can anybody please help? (i.e. is this even possible?)

Thanks that works.
I was using a variable, so I adapted your example to use the variable, not an element.
<xsl:attribute xdofo:ctx="block" name="background-color"><xsl:value-of select='$exEmpBackgroundColour' /></xsl:attribute>
Regards

How to use PAPI-Ws to get the Process Image

As what the topic says,
I use the papi-ws to connect to the BPM engine,
But I can't find the API to show the Process Image via Papi-WS
Can anyone help ?
Thanks a lot~
Best wishes,
Alex

Here is the sample code
ProcessService processService = null;
ProcessServiceSession session = null;
try {
processService = ProcessService.create(configuration);
session = processService.createSession(USERNAME, PASSWORD, HOSTNAME);
for (String processId : session.processesGetIds())
fuego.papi.Process process = session.processGet(processId);
ProcessDiagram diagram = session.processGetDiagram(processId);
diagram.setTheme(ProcessDiagram.THEME_COLOR_BPMN);
diagram.setDrawFlowOnly(true);
Image image = diagram.getImage();
File pngImage = new File(createPngFilename("image"));
image.write(pngImage, ImageExtension.PNG);
catch (Exception e)
e.printStackTrace();
finally
session.close();
processService.close();
You can also look for more pointers here
http://beatechnologies.wordpress.com/2011/07/26/archiving-audit-diagrams-as-images-in-oracle-soa-suite-bpm-processes/

How can use a variable in the folowing code?

How can use a variable 'W_ROWNUM2' in the folowing code?
MOVE '1' TO CNT.
LOOP AT L_T_PM2.
              CONCATENATE '0' CNT INTO W_ROWNUM2.CONDENSE W_ROWNUM2.
               CONCATENATE 'F110V-VARI'W_ROWNUM2'(01)' INTO FLD2.
    perform DYNPRO_FIELD       using FLD2
                                 L_T_PM2-vari12_con.
               CNT = CNT + 1.
               CONDENSE CNT.
ENDLOOP.
I need to increment the value of W_ROWNUM2.
Please ,it is urgent!!

Hello
CONCATENATE 'F110V-VARI'W_ROWNUM2'(01)' INTO FLD2.
Try using spaces between parts of the resulting string.
CONCATENATE 'F110V-VARI' W_ROWNUM2 '(01)'   INTO FLD2
Regards
Greg Kern.

Process Instruction Category for the online inspection in process industry

Dear Gurus ,
I will have to add online quality inspection in the PI SHEET so please suggest me the process instruction category for the same .
Abhi

Hi,
PPPI_INSPECTION_LOT Inspection lot
PPPI_INSPECTION_RESULT Inspection result
Please refer the details,
[Process Instruction Category|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4b82b590-0201-0010-a39b-89349ba1972b]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/277bb590-0201-0010-a992-f785fb7aa787
Regards,
R.Brahmankar

How to use bind variables in the following query

CREATE OR REPLACE PROCEDURE MMDB.test IS
sel_qtn VARCHAR2 (10);
CURSOR PT_QUANTITY IS select * from mmdb.product_tree WHERE QUANTITY_CHECK ='E'
AND run_id = 100
a PT_QUANTITY%ROWTYPE;
BEGIN
FOR i IN PT_QUANTITY
loop
sel_qtn := i.quanttity-1;
While sel_qtn>=1
loop
insert into mmdb.product_tree (BILLING_ACCOUNT_NO ,S_CODE) values (i.BILLING_ACCOUNT_NO ,i.S_CODE||'E');
sel_qtn :=sel_qtn -1;
End loop;
commit;
end;

Don't duplicate threads: How to use bind variables in the following query

Error in using System Variable

Dear all,
I want to use System Variable 225 ( VAT percent (per VAT code) ) which is used in one of document i.e. "VAT Only Invoice".
When I used it in my Invoice document the following error occurs:
Printing Error : Invalid Variable number (RPT -6300)(Field:F_XXX) Variable 'XXX'
Please help me to use this System Variable in my Invoice.
Note: I have already read "How To Use the PLD Variables File in Release 2007 A" .pdf file.
can any one tell the meaning of folowing which is in the sheet "vars utilisation" of PLD_Vars_march2007 xls file
" it means that this variable can be used only under certain repetitive area exclusive numbers (109, 126, 132, 135, 139, 148, 149, 309, 316, 427, 502, 509, 686)
Regards,
Ghazanfar
Edited by: Ghazanfar Ahmed on Jun 18, 2009 12:16 PM

Hi,
It is a special variable available for the VAT summary part, not to be used in the rows but in a separate repetitive area.
To display the respective VAT rates in each row, create a database field instead: Tax Definition - Rate%. It will populate the VAT percentage for you.
Regards,
Nat

How to access system variables in Script Component in data flow task in SSIS

Hi,
I am new to SSIS. Can someone tell me how to access system variable in Script Component in SSIS using C# code.
Thanks

You can use the System.Environment.GetEnvironmentVariable(...) to read the variables. An example is here:
http://msdn.microsoft.com/en-us/library/y6k3c7b0.aspx
Vikash Kumar Singh || www.singhvikash.in

How to set a variable value on the BPC Data Manager

Hello BPC Experts,
I'm creating a BPC10 NW version demo environment for our prospect customer.
I made a data manager to import BW data into BPC model from BW cube.
I need to import just one month data into BPC from the BW cube that has more than one month data.
When I run the data package manually, I can select a member of the time dimension prompt and I can import specific month data I want.
But, in a case where the program (data manager) runs by JOB monthly,
I can't select a member of the time dimension prompt manually.
So I want to know how to set a variable value to the time dimension prompt from a system date etc. automatically.
Are there any way to set a variable value to the time dimension prompt on the data manager automatically from a system date?
Or, do you have any other solution to import just one month data into BPC from the BW cube that has more than one month data by the data manager running on JOB ?
(without selecting a member of the time dimension prompt of the data package manually)
Thanks in advance,
Keisuke

Hi Gersh
Sorry for my late reply and thanks for your helpful information.
I tried the second way of your information and I could configure it.
And I 'll try first way of your information.
Regards,
Keisuke

How to use a variable of jsp custom tag in my java code?

hi folks,
i got a folderList tag like this:
ArrayList list = new ArrayList(20);
%>
<foo:folderList path="${attributes.newsPath}" var="year" contentType="folder">
<%
          list.add(${year.contentEntryName});   // of course, this doesn't work
%>
</foo:folderList>I think, its clear what I want to do. I am just wondering how I can use my Variable "year" in the Java code between <% %>...

<% list.add(year.getContentEntryName()); %>
You have to have defined in the custom tag that "var" relates to a scripting variable that you want defined.
<tag>
<variable>
    <name-given>var</name-given>
    <variable-class>myPackage.myClass</variable-class>
    <declare>true</declare>
    <scope>NESTED</scope>
</variable>
</tag> Cheers,
evnafets

How to use sql variables in jdbc send adapter??

Hi,
i wanna use a variable in the sql statement in the jdbc send adapter.
i know i can key sql statement in the "Query SQL Statement" in the jdbc send adapter.but i dont know how to use variables in the sql statement.
i mean, for example, the sql statement is "SELECT * FROM t_student WHERE READFLAG = 0", but now i wanna instead of "0"(the value of the READFLAG) using a variable.
and if i can use a variable to replace the "0"(the value of the READFLAG above sql statement), then how can i send a value to the variable??
request help in the regard.
thx in advance.
Brian

Hi,
Use the place holders to pass the data at runtime. Check the below structure for more details.
Hope this helps.
Thanks and Regards,
Kalpesh
<root>
<stmt>
    <Student action="SQL_QUERY">
      <access> SELECT * FROM t_student WHERE READFLAG = '$FLAG$ </access>
      <key>
        <FLAG>0</FLAG>
      </key>
    </Student>
</stmt>
</root>

How to use bind variables in this procedure

Hi Experts,
How to use bind variables in this procedure for static queries.
PROCEDURE DELETE_MER_PROC (M_id IN NUMBER)
IS
BEGIN
V_date DATE;
SELECT PD_DATE INTO v_date FROM PD_MAINTAIN;
    DELETE FROM MER_CLEAR
    WHERE MER_DT < v_date
    AND ID = M_ID;
COMMIT;
END;
How to use v_date and m_id as bind variables in this procedure to avoid hard parsing.
Please help me.
Thanks.

976208 wrote:
How to use v_date and m_id as bind variables in this procedure to avoid hard parsing.
You cannot avoid hard parsing - as the 1st time a SQL statement (like the SELECT or DELETE statements in your code) is encountered, it does not reside in the server's Shared Pool, and needs to be added into the pool via a hard parse.
Bind variables does not prevent hard parsing. Hard parsing happens when the SQL statement (with or without bind variables) is a brand new statement encountered by the server.
Bind variables enables the same SQL cursor to be reused, by simply changing the bind variable value.
Not using bind variables means that each SQL statement is unique and not shareable - as the value is hardcoded into the statement and cannot be changed via a bind value. This typically means LOTS of different SQL statements (where the only difference is the changed value in the statement) are created - with each statement being a new statement not seen before in the Shared Pool and needing to be hard parsed.
One does not design one's code not to be hard parsed. There ALWAYS will be a hard parse in order to get a SQL statement into the Shared Pool. One designs one's code to REUSE cursors in the Shared Pool.

How to use substitution variables in sqlplus activity of process flow

I have a process flow that does nothing more than create a couple of packages that I cannot successfully deploy from OWB. A workaround, not something that I want to do, but currently there is not much time to adjust the packages so they can be deployed from OWB.
I can successfully create the packages from files that are present in a directory on the server. But the location (directory) is not the same in all cases (OTAP). So I thought to use an input parameter to the process flow (named TELLINGEN) and use that in the sqlplus activity.
I have created the parameter START_PATH with a default value.
I have added an sqlplus activity and placed the following into the PARAMETER_LIST variable of the activity:
?${Target.ConnectString}?@${TELLINGEN.START_PATH}/npl_dbug.pkg?
When I run the process flow I see the following in the output:
SQL*Plus: Release 10.2.0.3.0 - Production on Tue Mar 18 18:10:14 2008
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SP2-0310: unable to open file "${TELLINGEN.START_PATH}/npl_dbug.pkg"
SQL> SQL> Disconnected from Oracle Database 10g Enterprise Edition Release
10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
It obviously connects to sqlplus but then cannot find the file. Presumably because the variable has not been substituted.
How can I persuade the activity to substitute the variable?
Kind regards,
Eric.

Have been reading around a bit and found the (a) solution:
I placed the following in PARAMETERLIST:
?${Target.ConnectString}?@${Working.RootPath}/base64.sql?
And it turns out ${Working.RootPath} is pointing to the location you can provide under the configure for the sqlplus activity in the process flow. Just as you have to provide the target destination as indicated here: Re: SQLPLUS Activity in Process Flow
From the documentation it was not immediately clear to me where Working.RootPath was pointing to.

How to use Bind Variables in Essbase data control

Hi,
I am trying to use Bind Variables in MDX query while creating the Essbase Data Control. I have used the below query with the Bind Variable.. this query is working in Essbase admin console..but it is throwing error (*Invalid MDX Query)* while creating Essbase Datacontrol in JDeveloper.
MDX Query : SELECT {[Measures].Msr_2} ON COLUMNS, [Time].Children ON ROWS FROM cube
where ($name)
Could any body suggest me on how to use bind variables with Essbase Data control.
Thanks,
Swathi

Hello Swathi, can you please help me how you created Essbase DataControl? Also were you able to figure out this?
Thanks, Praveen.

How to use System Variable SY_ROW in the Process Instruction Category

Similar Messages

Maybe you are looking for