How to use h:message to display HTML code in message from property file

I am using <h:message for="somecomponentid"/> to display the error message for a validator attached to a component and the error message which resides in message property file contains HTML elements like <br> and
The HTML doesnt get displayed properly and the code <br> etc is displayed instead.
Is there a method to get h:message to display HTML elements correcly.
[I know there is an h:outputFormat which has an escape parameter to allow HTML to be rendered correcly but it has no for parameter to specify the component id whose validation error message I want to display]
eg.
<h:message for="somecomponentid"/>
to display from errormessages.properties
com.somecompany.thevalidationerrormessage=You have an error<br> Please click here to return to homepage

Hello Ivan,
Fortunately I have just recently found a solution to my problem by using code by a developer who had already had this problem in the past and who provided a patch on the Apache MyFaces jira site.
See following link for the solution I downloaded and then used :
http://issues.apache.org/jira/browse/MYFACES-155
I believe they are intending to eventually release this in a future release of MyFaces extensions on this site.
I used the escape attribute on the tag to allow 'escaped' html code in error messages to be used.
Hope it solves your problem too..
Suhel

Similar Messages

How to use command line with acrobat to extract page(s) from pdf file?

I have adobe acrobat, and have a pdf file with over 500 pages. I need to extract small chunks of pages from it as seperate pdf files. I was hoping I could use command line interface to do this faster.
Something like:
acrobat src des start end
so for example
adobe file.pdf my_folder 3 5
Is this possible? There are many chunks and I don't want to manually do it for every chunk. Command line would be much easier...
Thanks

I can't find any programs... sorry.
Can you create one for me please.
It should at least have these 5 arguments: (well the first one is not neccessary since were not using acrobat anymore...)
[program] [src path/src file] [destination path/file name] [start page (inclusive)] [end page (inclusive)]
for example:
acrobat ./my_file.pdf ./my_folder/chunk1.pdf 3 5
if start page == end page, then it only extracts that one page.
So this way I can just stack these comands on a .bat file or something (maybe like 100 commands), then run the bat file, and it will create all the files.
Thanks for doing this, it is appreciated.

How to use Faces Message

Hi ADF people,
I'm using the following code
FacesMessage msg=new FacesMessage();
msg.setDetail("felix");
msg.setSummary("Andrew....");
FacesContext.getCurrentInstance().addMessage(null,msg);
but displays only felix with information as severity. Why it doesn't display the summary part ("Andrew").
What is the usage of setSummary method ??????????????
Please suggest me to come over of this issue??????????????
Looking for your Reply,
Felix

Hi,
I would like to know what is the use of that setSummary() and as well as in my project we are specifying the error messages in property file like this to get the FacesMessage
purchaseInvoice.post.posted=MSG-00058 : Document {0} successfully posted.
purchaseInvoice.post.posted_detail=MSG-00058 : Document {0} successfully posted.
"In all cases, if a ResourceBundle hit is found for the {messageId}, look for further hits under the key {messageId}_detail. Use this value, if present, as the detail for the returned FacesMessage." (reference : [FacesMessage API|http://docs.oracle.com/cd/E17802_01/j2ee/j2ee/javaserverfaces/1.1_01/docs/api/javax/faces/application/FacesMessage.html]
So my question is why should I repeat the message two times in the properties file???? Is there anyway to avoid this?
Also I need to pass parameters from the java file properties
Regards,
Felix

How to do search of business partner data, using a message from external sy

Hi CRM Gems,
please send the answer to the following question.
1.How to do search of business partner data, using a message from external system. What FMs, BAPI etc that can be used for this functionality?
your answer will be valuble to me.
Regards,
Krishna..

Hi krishna,
Look at BAPI BAPI_BUPA_SEARCH.
Regards.
Manuel

How to use fault message for error handling.

HI
Anybody has an idea about how we use fault messages to handle errors in XI
Thanks
Debraj

Hi,
Refer this link. This pdf file has descriptions about fault message types and how to use it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4cdfc390-0201-0010-2197-da4ada09f281
Regards,
Uma

How to use PO message type to output 'Form' as PDF file

Dear experts,
I am working for a topic of how to use PO message type to output 'Form' as 'PDF file', and save to external file system automatically.
Any one familiar to this topic, please kindly give me some guide, thank you!
Regards,
Joyce

Hi,
Go through the program RSTXPDFT4 (Converting SAPscript (OTF) or ABAP List Spool Job to PDF), you will get some idea. Using this program you can convert spool into PDF file.
-Alpesh

How to pick a message from a mail box using shell script

Hi
Can any one tell me how to pick a message from a mail box using shell script.
Thanks,
Suman.

Hi Suman,
Can any one tell me how to pick a message from a mail box using shell script.Grep for the message and then either cut or awk for the text. . . Something like this:
ls -al /mail/directory | grep "$1"* | awk '{print $9}'
Jon emmons has working samples in his book on Oracle shell scripting . . .
Hope this helps . . .
Donald K. Burleson
Oracle Press author
Author of "Oracle Tuning: The Definitive Reference"
http://www.rampant-books.com/book_2005_1_awr_proactive_tuning.htm

How to delete the messages from JMS Queue

Hi,Can anybody help how to delete the messages from the JMS Queue.Thanks in advance.

You can dequeue the message using a JMS client or delete it using Weblogic Admin Console -
http://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e13952/taskhelp/jms_modules/queues/ManageQueues.html
Regards,
Anuj

How can i remove messages from faces context

hi
how can i remove messages from faces context
with regards
shannu sarma

I'm also looking to find a way to remove message/s from FacesContext, and so far I've not been able to do this.
The issues described below (if you have the patience to understand it) may uncover some JSF issues when combining different functionalities in JSF to come up with a solution.
I have a requirement to display (let's just say error) messages in a message board. I do this in 2 steps: field-level validations are done first, and if all corrected (by the user), I do multi-field-level as well as business logic validation after model update (the way JSF seems to be designed to handle different types of validations). Let's say I have a combination of 3 combo-boxes that are dependent on one another. Selection from (1) requires dynamically filtering and setting a list for two and that in turn requires dynamically filtering and setting a list for 3, so the first two have valueChangeListener (try doing this in JSF!!!, I had to hack my way through to set this up with JSF, but that is not the issue). I have business rules associated with items within combo (1) and other entry fields entered by users (i.e. for simplicity let's just say, if material 'chain' is selected from combo 1, I should set combo (2) and (3), and validate that user entered at least four in # used entry field). Let's say I have a table with many rows of above combination of combo-boxes specified. Again for simplicity, assume we only have business rule violations (not field-level that would not go through model update):
* User selects many combination of entried before submit (with no field-level error)
* Business rules are checked and messages added to FacesContext and displayed in a message board
* Next, all these messages disappear from the view when selecting any item from any combo-box (with valueChangeListeners attached to them) - 2 reasons: 1. a new FacesContext is created per valueChangeEvent 2. Business model update does not happen (so we don't generate these messages again and add them to FacesContext, it is not efficient to do so anyways)
* we would like to display all those business logic validation messages so the user could correct them all (and not lose them by any combo-box selection)
* As a workaround, I add these messages to session (which is another issue, since FacesMessages are not serializable) at the end of business logic validation, and retrieve and display them by (a.) forcing combo-boxes go through (field-level) validation, (b.) adding a new hidden field at the end of all fields in JSP page with a custom-validator that all it does is to get messages saved to session (from the last business logic validation) and add them to the FacesContext - this ensures that messages are not lost due to combo-box selections
* The problem is that when user submits (to validate the business rules again), since the old Business validations messages are added to FacesContext at the end of field-level validation, I need to clear them, before adding the newly generated messages
* But....I can't remove messages from FacesContext
So here's a reason for this 'needed' functionality, based on whatever is available (as of JSF 1.1.01). Is there a better way to this, I'll be delighted to hear it (as I have tried different solutions myself with above combination of issuses), and have wasted some time trying to work-around the issues I've faced using JSF (in every one of those ways I've tried) ....part of which is described here...
Thanks...

HT201269 how do i transfer messages from one iphone to another

how do i transfer messages from one iphone to new iphone

"There is nothing there when I go to it."
What does "there" mean? What does "it" mean?
If you saved a backup in iCloud or iTunes, and then restored that backup to a newer device, you would see the messages ... assuming the newer device uses the same telephone number and cellular carrier as the old one did.

How do you export messages from Ovi Suite?

As the title says, how do you export messages from Ovi Suite?
I know how to export messages from Nokia PC Suite, but it doesn't seem to be possible in the new Nokia Ovi Suite.
Here is how I would do it in the Nokia PC Suite.
1. I click the Messages icon to open Nokia Communication Center.
2. I click on the Messages option on the left pane to view only messages.
3. In the main window I mark the messages I want to export.
4. Then I go to File menu and chose Export.
5. Choose destination folder and I'm all set to export my messages from my Nokia.
I can chose between the formats CSV and VMG (vMessage) for export. If more than one message is marked only the CSV format is available. But what you can do to export several messages in the VMG format is to mark them all in the main window and press CTRL+C or right click and chose Copy to copy them all to RAM memory. Then all you have to do is create an empty folder on the desktop and paste them in there by pressing CTRL+V or right clicking and chosing Paste.
That's all there is to it, using Nokia PC Suite. So how do you do this in Nokia Ovi Suite? You don't, right?
And this **bleep** Ovi Suite is supposed to replace PC Suite?
Thank God I won't be needing neither of them much longer. I am switching to Android and HTC. Good luck with Ovi, the Ovi Player, the Ovi Suite, the PC Suite, the Symbian, the S60, the Symbian^1 (S60 5th edition), the Symbian^3, the Symbian^4 and what not.

I believe OVI took a step in the right direction with this option. I also believe it was made available due to the fact that OVI Suite cannot take a huge number of messages altogether. This option was made available so that the messages could be backed up.
However, I'd like to suggest the following, if possible.
1. Make Nokia OVI Suite be able to handle a huge number of messages.
2. Have the option to export only selected messages.
Nokia 701 Dark Steel on Belle FP2

How to delete the messages from SXMB_MONI which are already cancelled .

Hi All,
The messages were earlier in System error(Red flag) state so i cancelled it manually.
I want to know how to delete the messages from sxmb_moni which are already cancelled manually using ctrl+f8.
if not possible , then i want to see them in earlier state i.e.., in System error(Red flag).
can any tell me the procedure of doing it.
thanks
Sai.

Hi AmitSri,
Thanks for u r reply,
What is retention period, where can i find this option.
And i don't have authorizations to sxmb_adm --> configure delete procedure
--> Define interfaces for archiving and retention period.
and to RSXMB_DELETE_MESSAGES in se38 , i don't have authorizations to run
Is there any way to delete the messages or make them to System error( Red flag) which are manually cancelled.
Thanks
Sai.
Edited by: sai_SHA on Aug 17, 2011 12:29 AM

How to delete the messages from sxmb_moni with status cancelled

Hi ,
how to delete the messages from sxmb_moni with status cancelled
Is there any report for this
Regards
Suman

I think just for deleting the jobs you can do this only
Scheduling Delete Jobs
To schedule delete jobs, proceed as follows:
       1.      In the Integration Engine -
> Administration menu, choose Schedule Delete Jobs.
       2.      Select the job(s) to be scheduled.
       3.      Specify the start time and date.
       4.      Specify the period you want to use and choose Schedule.
For an overview of all jobs, choose Jobs.

How to input password automatically with below html code

I want to display one pdf file with password(I know the password) on website.How to input password automatically
with below html code:
<object classid="clsid:CA8A9780-280D-11CF-A24D-444553540000" width="760" height="411" border="0">
<param name="_Version" value="65539">
<param name="_Password" value="1234">
it seems <param name="_Password" value="1234"> does not work.
Is there any way to input password of PDF file automatically on server side so that Client user don't need to input password.

Not possible.

How do i delete messages from i phone and clear the name/number from appearing in my message list?

How do i delete messages from i phone 4 but make sure the line/number/details clears from my list on messages so i don't have a long list in there??

To delete a conversation, you can either swipe left to right, and delete the conversations, or use the edit button. If you have a conversation selected, edit will allow you to delete specific messages.

How to use h:message to display HTML code in message from property file

Similar Messages

Maybe you are looking for