How to use HTTPS from JDeveloper 9i

I am trying to run a custom JSP thru Jdeveloper 9i.
It opens a HTTP connection but I want to open a HTTPS connection.
Checked in Tools>Preferences but could not find a link for this.
Any pointers on how this can be achieved.
Thanks

Hi,
I don't think tha there is an option for this since HTTPS is not configured by default with the embedded OC4J. As a work around I suggest you create a HTML file that you run from JDeveloper and that redirects to the https port to launch your application with HTTPS. Make sure you read the OC4J security guide to learn about the required setup for OC4J and SSL
Frank

Similar Messages

HOW TO USE CLIPS FROM A DVD???

HOW TO USE CLIPS FROM A DVD???
i know this may be a stupid and obvious question but i can't seem to figure it out.
these are not copyrited dvds... mostly home movies and old home movies put onto dvd.
thank you... much appreciated.

Studio X has given one suggestion.
MPEG Streamclip is another:-
http://www.squared5.com/
It is free but your computer may not have the QT MPEG 2 Playback Component which costs $20 from Apple as a download.
If you have access to an Analogue-DV converter you can use that. Also a DV camcorder which has Analogue IN.
If you have Final Cut Pro installed, you will have the QT component.
Message was edited by: Ian R. Brown

How to use CVS with JDeveloper

Hi all!
I'm starting a new project and I would like to know how to use CVS with JDeveloper. This is my first project where I will have two more people working with me and I don't know what the better approach is. Should I use CVS that come with JDeveloper (option Internal to Oracle JDeveloper 10g) or should I configure an external repository? In both cases, I don't know what I have to do to have CVS working properly with JDeveloper. Actually I tried to create a new CVS connection in CVS navigator (using the access method Password Server), but when I test I receive the message: Could not open connection to CVS server: general socket failure, sure I must doing something wrong.
I'm using JDeveloper 10.1.3.0.4
Thanks in advance.

Thanks for you help John!
I installed cvsnt and when I try to create a new CVS connection inside JDeveloper I receive the message: authorization failed: server adminf29786.dixamico.com.br rejected access to /Diversos/DownLoad/CVS/usr/local/cvsroot for user JMartins
I using pserver method and JMartins is my user in windows
There is something that I'm curious about, when I was installing CVSNT I didn't configure any user and password, is there any default user/password?
Thanks!

Problem in calling webservice using https from livecycle designer

I want to call a webservice written in .net(c#) using https from livecycle designer.I can call webservice using http ,but when i try with https it is failing.If there any special configuration have to do in server for this ?I have already put crossdomain in server.
Waiting for your reply
thank's

How did you call from LC? Please help me out either one is fine to me http or https
Srujan

How to use JPublisher in Jdeveloper 11g?

Hi! I have question. How to use JPublisher in Jdeveloper 11g? Maybe someone can help?
Best regards!

Hi! I have question. How to use JPublisher in Jdeveloper 11g? Maybe someone can help?
Best regards!

Does anyone know how to use vlookup from a pop up menu to retrieve another pop up menu?

Does anyone know how to use vlookup from a pop up menu to retrieve another pop up menu?

BM,
Pop-Up menu format is not dynamic. It is created in the Cells Inspector and can't be modified contingent upon the state of other cells.
You could program a table to list the options available for the previous selection, but it wouldn't be in the form of a Pop-Up.
Jerry

How to use HTTPS to retrieve a set of files from a distant server?

Hi !
i am interested in some samples or links showing how is it possible to use HTTPS in a java code in a standalone application ( could be swing based or whatever) that allows an HTTPS connection to a distant server ( specefic file repository) so that downloading some data files could be possible.i am also interested to know what conditions should be available to make such connection possible ( specefic port number? specefic authentication? login? password? and does the Operating system on the distant server interfere with that ? etc...)
thanks!

in fact i tried to test a sample code by i got this exception :
Exception in thread "main" javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
     at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:174)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1591)
     at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Handshaker.java:187)
     at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Handshaker.java:181)
     at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(ClientHandshaker.java:975)
     at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(ClientHandshaker.java:123)
     at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Handshaker.java:516)
     at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Handshaker.java:454)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:884)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1096)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1123)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1107)
     at sun.net.www.protocol.https.HttpsClient.afterConnect(HttpsClient.java:405)
     at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(AbstractDelegateHttpsURLConnection.java:166)
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:977)
     at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(HttpsURLConnectionImpl.java:234)
     at HTTPSConnector.main(HTTPSConnector.java:30)
Caused by: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
     at sun.security.validator.PKIXValidator.doBuild(PKIXValidator.java:285)
     at sun.security.validator.PKIXValidator.engineValidate(PKIXValidator.java:191)
     at sun.security.validator.Validator.validate(Validator.java:218)
     at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.validate(X509TrustManagerImpl.java:126)
     at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(X509TrustManagerImpl.java:209)
     at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(X509TrustManagerImpl.java:249)
     at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(ClientHandshaker.java:954)
     ... 12 more
Caused by: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
     at sun.security.provider.certpath.SunCertPathBuilder.engineBuild(SunCertPathBuilder.java:174)
     at java.security.cert.CertPathBuilder.build(CertPathBuilder.java:238)
     at sun.security.validator.PKIXValidator.doBuild(PKIXValidator.java:280)
     ... 18 moreand here si the sample code:
package foo;
import java.net.URL;
import java.io.*;
import javax.net.ssl.HttpsURLConnection;
public class Test
public static void main(String[] args)
throws Exception
String httpsURL = "https://your.https.url.here/";
URL myurl = new URL(httpsURL);
HttpsURLConnection con = (HttpsURLConnection)myurl.openConnection();
InputStream ins = con.getInputStream();
InputStreamReader isr=new InputStreamReader(ins);
BufferedReader in =new BufferedReader(isr);
String inputLine;
while ((inputLine = in.readLine()) != null)
System.out.println(inputLine);
in.close();
}so what this error is due to? and how to fix it ?.
thanks!

How to use images from ADFLib

Hello OTN,
My application is devided into several ADFLibs, one of them is CommonUI. It includes common skin and it is imported into every application part.
There are some images which should be available in different parts, so I decided to put them in CommonUI.
After deploying adflibCommonUI adn refreshing Resource Palette, somehow I expected to see this image there, but it isn't.
Could someone, please, explain me, how to use images contained in imported ADFLib, for example, as imageLink icon?
Thanks.
ADF 11.1.2.1

Hi,
images need to be saved in a specific file structure in the JAR file to be accessible. See:
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/86-images-from-jar-427953.pdf
Frank

How to use "Add from POM" to add source path and docpath?

Hi
My team is developing multiple projects with JDeveloper 11gr2.
We share libraries and sources between team members using maven extension for JDeveloper.
We deploy class jar, source jar and javadoc jar to repository.
The project pom has some dependency defined as below
<dependency>
            <groupId>com.example</groupId>
            <artifactId>CommonClient</artifactId>
            <version>0.0.1-SNAPSHOT</version>
            <type>jar</type>
            <scope>compile</scope>
</dependency>
We use ProjectProperties->Mave->Dependencies->Add from POM button to add dependecies to Project.
The problem is that the class jar is added to the classpath but the source jar and javadoc jar are not.
As a result, Team members cannot see the javadoc in code editor.
Configure IDE libraries is an option but does not work well with maven.
Does anyone know how to add source jar and javadoc jar to project using "Add from POM" button?
Thank you!

Hi ,
Sample code snippet for GET_RELATED_CONTENT is as follows :
dataBinder.putLocal("IdcService", "GET_RELATED_CONTENT");
dataBinder.putLocal("dSource","CS");
dataBinder.putLocal("dID","3202");
dataBinder.putLocal("dLinkTypeID","1");
serializer.serializeBinder (System.out, dataBinder);
// Send the request to Content Server
ServiceResponse response = idcClient.sendRequest(userContext,dataBinder);
// Get the data binder for the response from Content Server
DataBinder responseData = response.getResponseAsBinder();
// Write the response data binder to stdout
serializer.serializeBinder (System.out, responseData);
// Retrieve the SearchResults ResultSet from the response
DataResultSet resultSet = responseData.getResultSet("RelatedContent");
// Iterate over the ResultSet, retrieve properties from the content items
for (DataObject dataObject : resultSet.getRows ()) {
System.out.println ("Related ContentID is : " + dataObject.get ("dDocName") );
Point to note is :
dLinkTypeID is set to 1 . Reason being that the rendition related content is used to link items . So looking for those related items which are as Renditions .
This value would be as follows :
dLinkTypeID Related content type
1 Rendition
2 Supersedes
3 Has Supporting content
4 Cross References
2 more sub types are :
Supports - dLinkTypeID=3 and extraparameter is isGetParents=1
Cross Referenced By - dLinkTypeID=4 and extraparameter is isGetParents=1
Hope this helps .
Thanks,
Srinath

How to use BC4J with JDeveloper 9i in a Team

Hello
I'm not sure if I'm to stupid, but to say the truth I didn't found the clue how to share a BC4J Application between several develeopers. Maybe someone can give me a hint.
That's my situation:
Our team is going to develop a web application using BC4J and BC4J-JSP, nothing special I think.
But my problem is, that BC4J and especially the wizards refer to a lot of different files. Even simple changes often result in multiple files being changed in different parts of the project.
Creating a view link between view objects in two packages for example changes the view objects in both packages. Also the project (.jpr) file or several "BC4J.xcfg" files are changed very often.
So it is not easy to find parts of code from which I can say they are owned by one developer and others which are owned by another. Most often, if you have to merge the work of different developers, you have to edit the BC4J-XML-Files using an external editor. Or did someone find a better way? Please tell me!
So, what is the best way to share code between developers?
Should I partition the application by packages?
- advantage:
it allows a fine partitioning
- disadvantages:
it has the great danger that BC4J makes changes in other packages which will be overseen when merging.
Should I create a projects for each developer and distribute code between the projects using libraries?
- advantage: no unseen changes will happen, as the libraries are readonly.
- disadvantages: no view links between view objects in different projects (Libraries) are possible! Also a lot of "load errors" can occure when updating a library, which have to be manually corrected in the dependent projects.
Are source code management systems a real help in this problem or do they just "manage" the problem? I already tried SCM and PVCS but was not very happy with the way of working. As JDeveloper is not "really easy" to use with theese tools.
So I would like to get any hints how other developers are dealing with this problem. Are you using BC4J with JDeveloper 9i in a team? Please tell me how do it and how you have partitioned your application.
Thanks in advance
Frank Brandstetter

Hi,
I'm not sure whether my answer is good enough for you, but it might help.
First of all, you have to use JDev 9.0.3, because 9.0.2 has big problems with associations/view links between objects in different projects.
Creating a view link between view objects in two packages for example changes the view objects in both packages. Also the project (.jpr) file or several "BC4J.xcfg" files are changed very often.This is not completely true in 9.0.3, as you may choose not to create an accessor in the imported object (and usually you don't need it neither!). As for bc4j.xcfg, there is a trick: define a "standard" database connection name to use all over your project! This will prevent modifying these files all the time!
Should I create a projects for each developer and distribute code between the projects using libraries?
- advantage: no unseen changes will happen, as the libraries are readonly.
- disadvantages: no view links between view objects in different projects (Libraries) are possible! Also a lot of "load errors" can occure when updating a library, which have to be manually corrected in the dependent projects.I would say, projects for each application component, which by chance will be managed by a single developer at a time.
As for the disadvantages, in 9.0.3 you are able to properly create associations and links using read-only objects. Hopefully, the release version will solve some generation inconsistencies...
Concerning the errors that occur when modifying a library, this might be balanced by the relative independence of the components... If you are able to develop following the dependency tree, you will not meet the problem very often.
Are source code management systems a real help in this problem or do they just "manage" the problem? I already tried SCM and PVCS but was not very happy with the way of working. As JDeveloper is not "really easy" to use with theese tools.Indeed, I do not have a SCMS really able to manage merges in the BC4J XML files... We rather try not to arrive there!
So I would like to get any hints how other developers are dealing with this problem. Are you using BC4J with JDeveloper 9i in a team? Please tell me how do it and how you have partitioned your application.I really hope that my hints will help.
Regards,
Adrian

[SOLVED] makepkg git clone fails (firewalled), how to use https

At my new employer git(hub) traffic has been blocked so I am unable to clone a repo with "git clone git://someurl/..." but I can clone via https "git clone https://someurl/..."
However, makepkg uses the former and fails with the following error:
Cloning into bare repository '/tmp/cower-git/cower' ...
fatal: unable to connect to github.com:
github.com[0: 192.30.252.130]: errno=Connection refused
Can I configure makepkg to use https cloning? I can edit makepkg itself, but this seems far from ideal.
For the time being, I just cd'ed into 'src' and manually cloned via https, then backed out and used 'makepkg -ei'. So I now have cower up and running, but this is a bit tedius to do for all git packages.

Change it how? I tried changing it to "https://github..." but then makepkg didn't treat it as a git repo and just downloaded the webpage.
EDIT: nevermind, I'm an idiot:
source=("git+https://github/...")
I know I had done this before, but I wasn't finding it when I needed it. Thanks.
- Trilby: Moderator and Noob!

How to use RowSetBrowser in Jdeveloper 3.2

Hi friends,
Please show me how to use the Webbean RowSetBrowser to view the
content of a ViewObject which made by the jbo:CreateViewObject.
Thanks,

Hi,
JQuery sample is in htmldbQuery_sample.zip.
File apex_developer_tool_bar.user.js is Greasemonkey script.
Go to Greasemonkey site and check document how import user scripts.
http://userscripts.org/about/installing
Read about htmltooltip.js from
http://dbswh.webhop.net/apex/f?p=BLOG:READ:0::::ARTICLE:3000
Read about other files
http://dbswh.webhop.net/apex/f?p=BLOG:READCAT:0::::CATEGORY:11100346066619
Regards,
Jari
Edited by: jarola on Dec 7, 2010 9:40 AM

HOw to use EL in JDeveloper 9.0.5

Hello All,
I am trying to use EL in JDeveloper 9.0.5 and it is not working. The problem I figured out is JDeveloper 9.0.5 doesn't have the jar files that support EL. Any idea how I can change the jar files to give support for EL in the JDeveloper 9.0.5???
Any help would be highly appreciated.
Thanks

Thanks for the prompt answer. I can use the JSTL tags, but the problem is I am using struts tags to iterate and to render other HTML controls.
The code is something like this
<logic:iterate id="FrmBean" name="FormBean01" property="dataId">
<logic:equal name="FormBean01" property="dataId" value="${dataObject.dataId}">
<bean:write name="FrmBean" property="dataId"/>
</logic:equal>
</logic:iterate>
I can not use a tag inside a tag. Yes, I can surely use a tag inside a HTML control, but that would not serve my purpose.
Is there any way by which I can change the .jar file of JDeveloper 9.0.5 from jsp version 1.2 to jsp version 2.0 so it starts supporting EL....??
Thanks

What is JHeadstart and how it is different from Jdeveloper

Hello everbody
I am new to JHeadstart but iam quite aquinted with Jdeveloper 10.1.3, so can any body please tell how JHeadstart is better than Jdeveloper and what extra thing can we do with it

JHeadstart is a plug in to use with JDeveloper. If you go to the JHeadstart product center you can read all about its features and benefits. http://www.oracle.com/technology/consulting/9iServices/JHeadstart.html
Good luck!

Audacity - how to use songs from iTunes?

Hello,
I'm trying to create some song clips to use in a music quiz - using songs from my iTunes library. I've downloaded Audacity and the MP3 encoder but am completely stuck - not sure that the encoder is even installed yet as I can't click on anything when I try and 'find' it.
I can't get most of my songs to play in Audacity - I think they're in an unsuitable format - .mp4? But how do I convert existing songs in iTunes into a format that I can edit in Audacity? AND then, do I burn them onto a CD in a particular format so that they will play on a PC (for the quiz)?
Any help would be great - many thanks.

The guide to installing the Lame encoder is here
http://audacity.sourceforge.net/help/faq?s=install&item=lame-mp3
I just saved mine to my Audacity folder in Applications then pointed Audacity in the right direction 1st time I used it.
Right click on a track in iTunes and select "convert to mp3" does the trick.
PCs read MP3's so all should be well. If not, save the tracks as WAVs (audio files).

How to use HTTPS from JDeveloper 9i

Similar Messages

Maybe you are looking for