How to use multiply sequences?

HI - I always worked with just one sequence for the entire project, but this time the project I'm working on is so big that it makes sense to work with many (30+) separate sequences.
Can I do this in FCE4? I mean - if I mad so many small sequences and have then all in the Browser of the project, and then I want to assemble a whole movie - can I just add the made sequences one after another into the Timeline (I think I would need to create another- blank sequence to put all of the already made ones into it?
Is there any pitfall or danger in such workflow, or is there something I should know about such approach? Will it work?

You do not need to save individual sequences, only the project which saves all information in the project. So if you close out of the tab of the sequence but don't close out of the project, any changes you made to that sequence are still applied and can be seen by reopening the sequence. When you are ready to quit out of your project/FCE, then you go to +File > Save Project,+ which saves all of your work (all of the changes to all sequences, any clips in the browser, etc) so that you can access it next time you open up the project.
The only thing that doesn't follow this pattern is exporting. To export your sequence, you open it into the timeline or select it in the browser and go to +File > Export.+ However, this will only export the selected sequence. If you have other sequences nested within this sequence, it will export the sequence as if the nested sequences were normal clips. So, if you want to export two different sequences as different files, then you would have to open one and export it, then open the other and export it.
For your purposes, you just save the project whenever you need to, then at the end render out the "full" sequence and mixdown the audio. Finally, you export it as you would any normal sequence.

Similar Messages

How to use parallel sequence for split the operation qty. urgent or other o

PP guru
My scenario is as follows.
I ve one material supposexyz.
For that material I' ve created bom, routing.
In routing I' ve mention only one operation. 0010.
Now I' ve the production order of 1000 kg.
I want to use two work centers to run this production order. ( e.g.work center a and b)
In routing I used work center a.
In short I want split that operation.
So what I ve to do or use parallel sequence and how???
or else is there any other option to split the order to two or more machines/work center?
Pls explain me in brief.
Regards,
Ram

Hi,
If you want to carry the production with two different work centers , first you need to split the operation qty.
For this in the order type dependent parameters OPL8
in the controlling tab page enable the indicator Cost collector
and set the default rule as PP2.
Create a Product cost collector with KKF6N.
   Now in the production order , select the operation and choose functions--->>> split.
   Now enter the operation split quantity and execute.
   Now in MD04 you can see two production order.
   In the second production order change the work center in the operation overview as desired and save.
Regards,
nandha

How to use new sequence when one is reached its maxvalue in PL SQL code

Hi,
Currently, I am populating a unique product serial number in a table column using a sequence call to generate new number. For different products, I have different sequences and in my PL SQL code usiing IF..Else block I populate serial number for different products. For one most selling product sequence, we are reaching a Max value in production in a month and to make sure that application will continue to work fine for various end users without getting any error on their screens, I want my code to switch to new sequence automatically. I just need to add another if condition but my problem is how to find accurately when max value is reached for old sequence.
As call to old sequence can happen in different sessions there could be inconsistency and can end up at error. My new sequence value has to start with AV1000. Please suggest.
My old sequence look like this :
SEQUENCE Prd
INCREMENT BY 1
START WITH AS1000
MAXVALUE AS9999
MINVALUE AS1000
CYCLE NOCYCLE
CACHE 2
Order Yes;
Edited by: user11695088 on Jul 15, 2009 12:14 AM

Catch the exception and use your new sequence. But somehow, I'm not liking your alternative approach.
SQL> set line 300
SQL> set pages 50000
SQL> set serveroutput on
SQL> create sequence testing_seq increment by 1 start with 1 maxvalue 3
2 /
Sequence created.
SQL>
SQL> create or replace procedure test_seq_proc(p_seq out number)
2 is
3 begin
4     select testing_seq.nextval
5     into p_seq
6     from dual;
7 --
8     dbms_output.put_line(p_seq);
9 --
10 end;
11 /
Procedure created.
SQL> declare v_out number;
2 begin
3     test_seq_proc(v_out);
4 end;
5 /
1
PL/SQL procedure successfully completed.
SQL> /
2
PL/SQL procedure successfully completed.
SQL> /
3
PL/SQL procedure successfully completed.
SQL> /
declare v_out number;
ERROR at line 1:
ORA-08004: sequence TESTING_SEQ.NEXTVAL exceeds MAXVALUE and cannot be instantiated
ORA-06512: at "ETL_ADMIN.TEST_SEQ_PROC", line 4
ORA-06512: at line 3
SQL>Cheers
Sarma.

How to use ODI sequences ??

I have an interface which need an ODI sequence.
When I execute it the value of the sequence is always the same.
I have seen on another thread that it may pass by an agent but...
I have 2 tables (source and target) from the same connexion which don't and won't have agent.
How can I do ??
My connexion is on an Oracle 10g RDBMS and I'm using an IKM SQL Control Append.
This is not the first time I have problem with the ODI Sequence but this time I can't create an RDBMS one ...
Thanks in advance,
BM

Hi guys,
I have some questions, I am trying to create a dimension and it should use a sequence, but I am getting the same issue as you guys. I can't not generate a unique key because my sequence is the same value for all rows.
So if I really understood there are two ways to use a sequence in ODI. One is using ODI sequence (creating it inside ODI) and other is using a RDBMS sequence.
First: What I have to do to use a RDBMS sequence? (Step by step please)
Second: I can't use an IKM SQL to SQL append in my interface. This interface is pretty simple - source is a flat file target is an Oracle table, I just need to move all flat files columns to Oracle table adding a sequence. I understood that my Staging area should be different than my Target area based on posts above. I already created a new datastore to be my new staging area, but I don't know how to make an association between interface and new stage area.
Can you please provide me the easiest solution?
Thanks
Leo

HOW TO USE a sequence in merge load

Hi,
Someone can help me with a solution for loading a table with merge option and one of the column has values from a sequence.
regards
Babu

Can we use a sequence to load a table with IKM Oracle Incremental Update (MERGE)?

How to use sub sequences as sources

Hi
I want to take a section from a sequence, and use it for source material later on for a recap. I mark an in/out on the sequence, hit 'make subclip' then load it in the viewer monitor. When I splice it into the sequence, it is not made up of it's original cut clips, it is a whole clip called 'sequence name' subclip. How can I get the overwrite/splice from the subclip sequence to contain the original cuts. As is so often the case with FCP in my experience, this can be done without a fuss in seconds on Avid.
Cheers for your time
Mark.

Hold the Command key as you make the edit either with the canvas edit overlay or with the F keys.
Or even drag and drop editing ... the command key is the trick.
A lot of folks like this to be the default behavior too ... so if you remap the existing Insert with Contents (Cmd-F9) and Overwrite with Contents (Cmd-F10) commands to the regular F9 and F10 keys then you get the best of both worlds.
Cheers
Andy

How to use parallel sequence in capacity planning.

How we can use parallel seq in capacity planning?we have two machines which can be run parallel for production ,now how to distribute capacity load? suppose for the production of 100 km,we required 1000 min when it is produced through only one machine.Now if 2 machines are used simultaneously we required 500 min.How to see this in capacity planning?

Dear,
For calculating Available capacity you have options like minimum capacity, normal capacity and maximum capacity. You can select this option in work center-capacity tab for individual capacity category.
With parallel sequence and with both machines you can select maximum capacity option and plan your capacity.
Hope this is helpful.
Regards,
Prasad

How to use concatenated sequence name in pl/sql

how can we have a sequence concatenated with another sequence
name eg
select ab.nextvalue into var1 from dual;
where a is a sequence and b is another sequence
null

Try this Puneet:
TO_NUMBER(TO_CHAR(a.nextvalue)

How to Use Sequence created in Oracle Database in SQL Ldr Control file

Hi,
I created a sequence in oracle database. How will use the sequence in SQL loader Control file.
Thanks in advance

Hi,
You might get a good response to your post in the forum dedicated to data movement , including SQL*Loader . You can find it here Export/Import/SQL Loader & External Tables
Regards,

Use of Sequence in Match-Merge

Dear All,
I have a source table containing name and address data. I want to do householding, which means I need to split the data using a match-merge operator. The address data is the merged output, and the name data is the cross-reference output. All well and good so far.
I want eventually to load the outputs into two levels of a Customer dimension (although for testing right now, I'm just using two ordinary target tables). I know that I will need a 'business key' to link the merged and the cross-reference outputs (as the two dimensional levels). I decide that I shall create a column in both outputs called HH_SEQ, and load this Household Sequence number from a Sequence (which I prepared earlier).
In Merge Rules, for the Attribute HH_SEQ, I use a Rule Type of Sequence, and select the appropriate Sequence from the drop-down list box. I map this attribute in the MERGE outgroup to the appropriate column in the target merged table, and MM_HH_SEQ in the XREF outgroup to the appropriate column in the target cross-reference table.
Here is the issue: to get HH_SEQ to be available as a potential Output Attribute in either Merge Output or Cross-Reference Output, it must first be present as a Source Attribute. Which means I had to add it to Input Attributes first. But of course it is not on my input source table! And thus I get a "VLD-1000 Input parameter INGRP1.HH_SEQ does not have input" warning.
Either I'm just not understanding how to use the Sequence rule type properly (the documentation is pretty atrocious, mind), or there is some technique required here that is just not apparent from several days of experimentation.
All help gratefully received!
Regards,
Donna
p.s. it does actually compile and run just fine!

Hi Donna
I think you are using it in the correct way! I've seen other examples like this from the MM creators.
The warning can be ignored, I think it is there to highlight a potential issue if it was being used for a scenario other than what you are doing.
Cheers
David

In this report i have marked one line..if this width 30,i need to multiply by a number 0.3 and if the width =30,it multiplies by 0.37...how to use this logic here..??? anyone can help??

In this report i have marked one line..if this width < 30,i need to multiply by a number 0.3 and if the width >=30,it multiplies by 0.37...how to use this logic here..??? anyone can help??
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @SCCode nvarchar(30)
select @FromDate = min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]'
select @ToDate = max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]'
--Rcpt from PRDN (Condition checked for Return component exclusion also)
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'FG Item Code',
T3.ItemName as 'FG Item Name',
T2.PlannedQty as 'FG Planned Qty',
T2.U_OD as 'OD',
T2.U_ID as 'ID',
T2.U_OD/25.4 as 'Inches',
(T2.U_OD-T2.U_ID)/2 as 'Width',
0 as 'FG Pending Qty',
0 as 'FG Receipt Qty',
'' as 'Issue Item Code',
'' as 'Issue Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
0 as 'Issue Item - Return Quantity',
'' as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode not in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode INNER JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID, T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2
UNION ALL
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'Item Code',
T3.ItemName as 'Item Name',
T2.PlannedQty as 'Planned Qty',
T2.U_OD as 'OD',
T2.U_ID as 'ID',
T2.U_OD/25.4 as 'Inches',
(T2.U_OD-T2.U_ID)/2 as 'Width',
(Select (T2.PlannedQty - (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum))) as 'Pending Qty',
(Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum) as 'Receipt Qty',
a.ItemCode as 'Issued Item Code',
a.Dscription as 'Issued Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
(Select (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode))) as 'Issue Item - Return Quantity',
(ISNULL((Select (Select a2.DocNum from OIGN a2 where a2.DocEntry = a1.DocEntry) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode)),'')) as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode LEFT JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID,T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2,a.ItemCode,a.Dscription order by T2.DocNum desc

Hi,
Try this:
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @SCCode nvarchar(30)
select @FromDate = min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]'
select @ToDate = max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]'
--Rcpt from PRDN (Condition checked for Return component exclusion also)
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'FG Item Code',T3.ItemName as 'FG Item Name',T2.PlannedQty as 'FG Planned Qty',T2.U_OD as 'OD',T2.U_ID as 'ID',T2.U_OD/25.4 as 'Inches',(T2.U_OD-T2.U_ID)/2 as 'Width',case when ((T2.U_OD-T2.U_ID)/2) <30 then ((T2.U_OD-T2.U_ID)/2) *0.3 end, 0 as 'FG Pending Qty',0 as 'FG Receipt Qty','' as 'Issue Item Code','' as 'Issue Item Name',Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',0 as 'Issue Item - Return Quantity','' as 'Return Doc No',SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntryINNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCodeLEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode not in (a.ItemCode)LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode INNER JOIN OIGN d on c.DocEntry = d.DocEntryWHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID, T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2UNION ALL SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'Item Code',T3.ItemName as 'Item Name',T2.PlannedQty as 'Planned Qty',T2.U_OD as 'OD',T2.U_ID as 'ID',T2.U_OD/25.4 as 'Inches',(T2.U_OD-T2.U_ID)/2 as 'Width',case when ((T2.U_OD-T2.U_ID)/2) >=30 then ((T2.U_OD-T2.U_ID)/2) *0.37 end, (Select (T2.PlannedQty - (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum))) as 'Pending Qty',(Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum) as 'Receipt Qty',
a.ItemCode as 'Issued Item Code',
a.Dscription as 'Issued Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
(Select (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry
where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode))) as 'Issue Item - Return Quantity',
(ISNULL((Select (Select a2.DocNum from OIGN a2 where a2.DocEntry = a1.DocEntry) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode)),'')) as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode LEFT JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,
T2.PlannedQty,T2.U_OD,
T2.U_ID,T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2,a.ItemCode,a.Dscription
order by T2.DocNum desc
Thanks & Regards,
Nagarajan

Help! how to use sequence in in Oracle

i have a table name account
and i want the id column used the sequence XJ.ID
so how to modfiy the .jdo file?
here is the .jdo file
<?xml version="1.0" encoding="UTF-8"?>
<jdo>
<package name="test">
<class name="Account" objectid-class="AccountId">
<extension vendor-name="kodo" key="class-column" value="none"/>
<extension vendor-name="kodo" key="lock-column" value="none"/>
<extension vendor-name="kodo" key="table" value="XJ.ACCOUNT"/>
<field name="accountDetails">
<collection element-type="AccountDetail"/>
<extension vendor-name="kodo" key="inverse"
value="account"/>
<extension vendor-name="kodo" key="inverse-owner"
value="account"/>
</field>
<field name="accountNo">
<extension vendor-name="kodo" key="data-column"
value="ACCOUNT_NO"/>
</field>
<field name="balance">
<extension vendor-name="kodo" key="data-column"
value="BALANCE"/>
</field>
<field name="createDate">
<extension vendor-name="kodo" key="data-column"
value="CREATE_DATE"/>
</field>
<field name="id" primary-key="true">
<extension vendor-name="kodo" key="data-column"
value="ID"/>
</field>
<field name="modifyDate">
<extension vendor-name="kodo" key="data-column"
value="MODIFY_DATE"/>
</field>
<field name="name">
<extension vendor-name="kodo" key="data-column"
value="NAME"/>
</field>
</class>
thanks.

With Kodo 2.5, you cannot use a database sequence when using application
identity.
Instead, you should use datastore identity, and use the
sequence-factory-class metadata extension or the
com.solarmetric.kodo.impl.jdbc.SequenceFactoryClass configuration property.
See the following URLs for details:
http://docs.solarmetric.com/ref_guide_meta_class.html#meta-class-sequence
http://docs.solarmetric.com/ref_guide_conf_kodo.html#com.solarmetric.kodo.impl.jdbc.SequenceFactoryClass
-Patrick
jian xu wrote:
i have a table name account
and i want the id column used the sequence XJ.ID
so how to modfiy the .jdo file?
here is the .jdo file
<?xml version="1.0" encoding="UTF-8"?>
<jdo>
<package name="test">
<class name="Account" objectid-class="AccountId">
<extension vendor-name="kodo" key="class-column" value="none"/>
<extension vendor-name="kodo" key="lock-column" value="none"/>
<extension vendor-name="kodo" key="table" value="XJ.ACCOUNT"/>
<field name="accountDetails">
<collection element-type="AccountDetail"/>
<extension vendor-name="kodo" key="inverse"
value="account"/>
<extension vendor-name="kodo" key="inverse-owner"
value="account"/>
</field>
<field name="accountNo">
<extension vendor-name="kodo" key="data-column"
value="ACCOUNT_NO"/>
</field>
<field name="balance">
<extension vendor-name="kodo" key="data-column"
value="BALANCE"/>
</field>
<field name="createDate">
<extension vendor-name="kodo" key="data-column"
value="CREATE_DATE"/>
</field>
<field name="id" primary-key="true">
<extension vendor-name="kodo" key="data-column"
value="ID"/>
</field>
<field name="modifyDate">
<extension vendor-name="kodo" key="data-column"
value="MODIFY_DATE"/>
</field>
<field name="name">
<extension vendor-name="kodo" key="data-column"
value="NAME"/>
</field>
</class>
thanks.

How to use a method in sequence diagram from a class diagram

Hello, can someone tell me how to use the method from class diagram in sequence diagram? so far i only can add a classifier to the object lifeline but i still cannot add the method from the class...
thx

Now that Web Services is around, I'd look at possibly implement a Web Service call in your applet, which can then be given back any object(s) on return. Set up your server side to handle Web Service calls. In this way, you can break the applet out into an application should you want to (with very little work) and it will still function the same

How to use sequence in client web proxy.

Hi,
I have created a sequence in database.
And I am using that in EntityImpl as:
SequenceImpl sequence=new SequenceImpl("Sequence_name",getDBTransaction);
setAttribute(sequence.getSequenceNumber)
I will automatically set the attribute with the sequence val.
But I want to get the sequence value in client web proxy generated through WSDL.
There I write the same code and imported the files.
But it is giving me error that:
java.lang.nullPointException.
How to access the sequence in client web proxy generated through WSDL.

Hi,
expose a method on the ViewObject and make it available to the service interface. In Web Services it does not make sense to create dependencies between a client and the implementation detail of the service.
Frank

How to use DSSS or FHSS sequencing methods in LabVIEW using modulation pallete

Hi
I would really appreciate it if you give me an example how to use DSSS or FHSS using modulation pallete. I searched for any example or tutorial for spread spectrum techniques but I couldn't find anything useful. even a very basic vi might be really helpful for m
Many thanks

Hi en99,
apologies for a very late reply and I'm sure you've figured this out by now anyway but just in case, here's a quick and dirty example of using dsss with a PN sequence and QPSK.
I'm not re-applying the matched filter here since the de-spread requires a tight alignment to the original timings (if you de-spread the wrong chips then you won't get your symbols out correctly so you do need some level of synchronisation).
Have a play with the Eb/No and the filtering from the front panel - you'll see the un dsss'ed spectrum narrow up as expected with some level of filtering, but the aim of dsss is to spread that out.
Hope this is useful.
Thanks
Sacha Emery
ATE Systems Engineer (NIUK)
// it takes almost no time to rate an answer
Attachments:
dsss comparison.vi ‏49 KB
example dsss snippet.png ‏119 KB

How to use multiply sequences?

Similar Messages

Maybe you are looking for