Get server ID using TM_MIB

Hi all,
In a tuxedo service (coded in C) I'd like to get the server id of the process
that is running. (the number in the ID field when you type 'psr' in tmadmin).
I found some documentation about MIB and administrative requests but I'm a bit
confused with it...
Can someone give me the source code I need please ?
Thank you very much.
Sébastien

Hi Sebastien,
Send an FML32 buffer to the .TMIB service with the field TA_OPERATION having the
value "GET" and the field TA_CLASS having the value "T_SERVER" and examine the
return buffer. If you are interested in a specific server, place it's name in
the TA_SERVERNAME field. Here is a simple ud32 input file that will dump the
MIB information on the WSL in an application:
SRVCNM     .TMIB
TA_OPERATION     GET
TA_SERVERNAME     WSL
TA_CLASS     T_SERVER
The return buffer (if the request succeeds) will have a field TA_SRVID that contains
the information you want. Please note you may get back many occurences in the
FML32 buffer returned that you'll have to match up. Hope that helps.
Regards,
Todd
"Sebastien" <[email protected]> wrote:
>
Hi all,
In a tuxedo service (coded in C) I'd like to get the server id of the
process
that is running. (the number in the ID field when you type 'psr' in tmadmin).
I found some documentation about MIB and administrative requests but
I'm a bit
confused with it...
Can someone give me the source code I need please ?
Thank you very much.
Sébastien

Similar Messages

Get SERVER info using ud32

Hallo,
is it possible to get information for a single Tuxedo server, using ud32, instead of having the whole listing?
I mean, specifying some other parameters
Thank you

you cann try--
SRVCNM <TAB> .TMIB
TA_LMID <TAB> <LMID>
TA_SERVERNAME <TAB> <server name>
TA_SRVGRP <TAB> <server group>
TA_SRVID <TAB> <server id>

Can't get pan to use more than 4 connections/server

My ISP has a news service that I users can access with a max of 20 connections per user.
I've been trying to use pan to download some file from this server, but I can't get it to use more than 4 connections.
On the pan web site it says to go to the NNTP menu,but I just can't find it.
What's up? Am I blind?

Have you overriden the doPost() method in ViewFormData? If not I think that you get this error message as a default
doGet() and doPost() should do the same thing so have one call the other

Facing severe problem in IE10 of automatically getting clicked on "use a proxy server" every 5 minutes in LAN Settings whereas it is not required to use any proxy server at all when directly connected through ISP broadband.

Using Window 8 Pro with IE 10 but facing tremendous problem in LAN settings. Every 5 minutes, it automatically gets clicked on "Use a Proxy Server for the LAN" and am unable to open any page unless the said setting is unclicked. The same applies
while using Chrome or Firefox browsers.... none of the browsers behave properly and have to repeatedly unclick on proxy server settings (in IE or Chrome) and change settings on Firefox.
Any suggestions to get rid of this problem...??? Thanks

Hi,
It seemed that some malware changed your registry which make proxy server enabled.
Did you install any proxy agent software recently? If you did, please try uninstalling it now. And then make a full scan
with malware removal tool.
http://www.microsoft.com/security/pc-security/malware-removal.aspx
Or locate to registry,
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings, set "ProxyEnable" = dword:00000000.
For more information, you can refer to
http://support.microsoft.com/kb/819961
Andy Altmann
TechNet Community Support

TS4020 I get "server error" when I try to use icloud on my Windows 7 pc

I get "server error" when I try to use icloud.1 on my Windows 7 pc
How do I resolve this problem?

Hi doggywag,
Yes, you must have an iOS device or a Mac to create an iCloud account.
Cheers,
GB

General Warning: could not get server configuration in ldap, using cached c

Guys,
desperately need some help here. I have an installation consisting of 4 mtas that speak to an ldap. I'm currently in the process of adding 2 more. I've added the fifth and there has been no problem whatsoever. I'm now trying to add the sixth. I install the software. There are no error messages as the software installs. It's able to see both the configuration and the user directories. Once this is finished I immediately go and run start-msg and for each component I get the message :
"General Warning: could not get server configuration in ldap, using cached configuration information".
I've tried pinging and tracerouting my ldap server with no problem, I can telnet/ssh to it. My server configuration is almost eaxctly the same as the fifth server. I make no other changes after the installation scripts finishes, yet it can't talk to the ldap.
I running IMS5.2p1 on a Solaris 8 SPARC server.
Thanks
Ali

That error message only comes up when the server can't get to the config ldap server on startup. There's no other time when you see this.
There is either a mis-configuration of your server, or of your ldap, or you just can't get there from here.
Why are you installing 5.2p1, now? 5.2p2 has been out for over a year. ..
6.0 has been out for well over a year, and 6.2 has been out for many months, now. I hate to see you installing old software, when new is available.

How can I load a .xlsx File into a SQL Server Table using a Foreach Loop Container in SSIS?

I know I've REALLY struggled with this before. I just don't understand why this has to be soooooo difficult.
I can very easily do a straight Data Pump of a .xlsX File into a SQL Server Table using a normal Excel Connection and a normal Excel Source...simply converting Unicode to DT_STR and then using an OLE DB Destination of the SQL Server Table.
If I want to make the SSIS Package a little more flexible by allowing multiple .xlsX spreadsheets to be pumped in by using a Foreach Loop Container, the whole SSIS Package seems to go to hell in a hand basket. I simply do the following...
Put the Data Flow Task within the Foreach Loop Container
Add the Variable Mapping Variable User::FilePath that I defined as a Variable and a string within the FOreach Loop Container
I change the Excel Connection and its Expression to be ExcelFilePath ==> @[User::FilePath]
I then try and change the Excel Source and its Data Access Mode to Table Name or view name variable and provide the Variable Name User::FilePath
And that's when I run into trouble...
Exception from HRESULT: 0xC02020E8
Error at Data Flow Task [Excel Source [56]]:SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occured. Error code: 0x80004005.
Error at Data Flow Task [Excel Source [56]]: Opening a rowset for "...(the EXACT Path and .xlsx File Name)...". Check that the object exists in the database. (And I know it's there!!!)
I don't understand by adding a Foreach Loop Container to try and make this as efficient as possible has caused such an error unless I'm overlooking something. I have even tried delaying my validations and that doesn't seem to help.
I have looked hard in Google and even YouTube to try and find a solution for this but for the life of me I cannot seem to find anything on pumping a .xlsX file into SQL Server using a Foreach Loop Container.
Can ANYONE please help me out here? I'm at the end of my rope trying to get this to work. I think the last time I was in this quandry, trying to pump a .xlsX File into a SQL Server Table using a Foreach Loop Container in SSIS, I actually wrote a C# Script
to write the contents of the .xlsX File into a .csv File and then Actually used the .csv File to pump the data into a SQL Server Table.
Thanks for your review and am hoping and praying for a reply and solution.

Hi ITBobbyP,
If I understand correctly, you want to load data from multiple sheets in an .xlsx file into a SQL Server table.
If in this scenario, please refer to the following tips:
The Foreach Loop container should be configured as shown below:
Enumerator: Foreach ADO.NET Schema Rowset Enumerator
Connection String: The OLE DB Connection String for the excel file.
Schema: Tables.
In the Variable Mapping, map the variable to Sheet_Name, and change the Index from 0 to 2.
The connection string for Excel Connection Manager is the original one, we needn’t make any change.
Change Table Name or View name to the variable Sheet_Name.
If you want to load data from multiple sheets in multiple .xlsx files into a SQL Server table, please refer to following thread:
http://stackoverflow.com/questions/7411741/how-to-loop-through-excel-files-and-load-them-into-a-database-using-ssis-package
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I bought a new imac running Loin and Office 2011. The server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software.

I bought a new imac running Loin with Office 2011. I am the only mac in the office and the Server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software other than webmail access through our website. It looks as though 2011 is not compatible with 2003 per some searches online, but what are some options I have to gain full access again? I purchased parallels in hopes that this my help and I am able to use remote desktop connection to log on to server but can not drag and drop files I need. There is a shared drive on that Server we all use to exchange files.
The two main issues are gaining access to my email again and ability to drag and drop files from mac to pc. I hope this is enough info to get some solutions.
PS - IT person says my iMac's IP is what his server does not understand so that is why I can not login.

Office 2011 is not compatbile with Exchange 2003.
I suggest you post further Office related questions on Microsoft's own forums for their Mac software:
http://answers.microsoft.com/en-us/mac

Trying to configure a Win 2003 Server to use TLS server authentication . . .

I am trying to
configure a Win 2003 Server to use TLS server authentication following Method 2 in KB 895443 - see below:-
Method 2: By using the Certificate Request Wizard
The following steps describe how to obtain a certificate from a Windows Server 2003 Certification Authority. You can also request a certificate from a Windows 2000
Certification Authority. Additionally, you must have Read permissions and Enroll permissions on the certificate template file to successfully request a certificate. Use this method if one or more of the following conditions are true:
You want to request a certificate from an Enterprise Certification Authority.
You want to request a certificate that is based on a template where the subject name is generated by Windows.
You want to obtain a certificate that does not require administrator approval before the certificate is issued.
To obtain a certificate, follow these steps:
Click Start, click Run, type mmc, and then click OK.
On the File menu, click Add/Remove Snap-in.
Click Add, click Certificates, and then click Add.
Click Computer account, and then click Next.
If you want to add a certificate to the local computer, click Local computer. If you want to add a certificate to a remote computer, click Another
computer, and then type the name of that remote computer in the Another computer box.
Click Finish.
In the Add Standalone Snap-in dialog box, click Close, and then click OK in the Add/Remove
Snap-in dialog box.
Under Console Root, click Certificates (Local Computer).
Note If you configured the Certificates MMC snap-in to manage a remote computer, click Certificates (servername)instead of Certificates (Local Computer).
On the View menu, click Options.
In the View Options dialog box, click Certificate purpose, and then click OK.
In the right pane, right-click Server Authentication, point to All Tasks, and then click Request New Certificate.
In the Certificate Request Wizard that starts, click Next.
In the Certificate types list, click Server Authentication, click to select the Advanced check box,
and then click Next.
In the Cryptographic Service Providers list, click Microsoft RSA SChannel Cryptographic Provider.
I get as far as step 11 and I get the error message:-
The wizard cannot be started because of one or more of the following conditions:
- There are no trusted certification authorities (CAs) available.
- You do not have the permissions to request certificates from the available CAs.
- The available CAs issue certificates for which you do not have permissions.
This is covered in KB 927066 – see below:-
To resolve the problem, follow these steps:
Verify that the CERTSVC_DCOM_ACCESS group exists in the domain that hosts the certification authority. This group is in the CN=Users container.
To do this, follow these steps:
Click Start, click Run,
type Dsa.msc, and then click OK.
In the left pane, click the Users container.
Verify that the CERTSVC_DCOM_ACCESS group is in the right
pane. If the CERTSVC_DCOM_ACCESS group is not in the right pane, go to step 4.
Verify that the CERTSVC_DCOM_ACCESS group includes the following member groups:
Domain Users
Domain Computers
If these member groups do not exist in the CERTSVC_DCOM_ACCESS group, go to step 4.
Note If users or computers in other domains need to enroll against the certification authority, you must also add those users and computers to the CERTSVC_DCOM_ACCESS group. If the current problem occurs on a domain
controller, you must also add the Enterprise Domain Controllers group to the CERTSVC_DCOM_ACCESS group. By default, domain controllers are not members of the Domain Computers global group. Therefore, domain controllers
do not have sufficient DCOM permissions.
Verify that the CERTSVC_DCOM_ACCESS group has the appropriate DCOM Access permissions and DCOM Launch and Activation permissions on the computer that hosts the certification
authority.
Click Start, point to Program,
point to Administrative Tools, and then click Component Services.
Expand the Component Services node.
Expand the Computers node.
Right-click the My Computer node, and
then click Properties.
Click the COM Security tab.
Under Access Permission, click Edit
Limits.
Verify that the CERTSVC_DCOM_ACCESS group has Allow Local Access and Allow
Remote Access permissions, and then click Cancel.
Under Launch and Activation Permissions, click Edit
Limits.
Verify that the CERTSVC_DCOM_ACCESS group has Allow Local Activation and Allow
Remote Activationpermissions, and then click Cancel.
Click Cancel, and then close the Component
Services console.
Settings may be incorrect if any one of the following conditions is true:
The CERTSVC_DCOM_ACCESS group does not exist.
The default membership of the CERTSVC_DCOM_ACCESS group is incorrect.
The CERTSVC_DCOM_ACCESS group does not have the correct permissions.
If any one setting is incorrect, run the following commands at a command prompt. Press ENTER after each command.
certutil -setreg SetupStatus -SETUP_DCOM_SECURITY_UPDATED_FLAG
net stop certsvc
net start certsvc
Repeat steps 1 through 3 to verify that all the settings are correct.
Note If the changes affect the group membership of the certification authority server, you must restart the server for the changes to take effect.
The only part of the above instructions which I have not been able to complete is:-
“you must also add the Enterprise Domain Controllers group to the CERTSVC_DCOM_ACCESS group”.
When I click on the CERTSVC_DCOM_ACCESS user then click the Members tab & go to add Enterprise Domain Controllers the option is not there.

Hi Nick,
Have you successfully set up an enterprise CA?
If yes, is the enterprise CA’s certificate located under the Trusted Root Certification Authorities store?
Best Regards,
Amy

[Forum FAQ] "Unable to connect to the server by using Windows PowerShell Remoting" error while installing RDS roles on Server 2012 R2

When you try to install RDS role on server 2012 R2 using standard deployment, this issue may occur (Figure 1).
“Unable to connect to the server by using Windows PowerShell remoting”.
Figure 1: Unable to connect to the server by using Windows PowerShell remoting
First of all, we need to verify the configurations as it suggested:
1. The server must be available by using Windows PowerShell remotely.
2. The server must be joined to a domain.
3. The server must be running at least Windows Server 2012 R2.
4. The currently logged on user must be a member of the local Administrators group on the server.
5. Remote Desktop Services connections must be enabled by using Group Policy.
In addition, we need to check if the “Windows Remote Management “service is running and related firewall exceptions have been created for WinRM listener.
To enabling PowerShell remoting, we can run this PowerShell command as administrator (Figure 2).
Enable-PSRemoting -Force
Figure 2: Enable PowerShell Remoting
However, if issue persists, we need to check whether it has enough memory to work.
By default, remote shell allots only 150 MB of memory. If we have IIS or SharePoint App pool, 150 MB of memory is not sufficient to perform the remoting task. Therefore, we need to increase
the memory via the PowerShell command below:
Set-Item WSMan:\localhost\Shell\MaxMemoryPerShellMB 1000
Then, you need to restart the server and the issue should be resolved.
You can get more information regarding Remote Troubleshooting by below link:
about_Remote_Troubleshooting
If you need further assistance, welcome to post your questions in the
RDS forum.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

i found another possible reason, this solution worked for me:
http://oyvindnilsen.com/solution-for-powershell-remoting-error-it-cannot-determine-the-content-type-of-the-http-response-from-the-destination-computer/
I tried to set up powershell remoting on a server and kept getting this error:
Enter-PSSession : Connecting to remote server failed with the following error message : The WinRM client cann
ot process the request. It cannot determine the content type of the HTTP response from the destination comput
er. The content type is absent or invalid. For more information, see the about_Remote_Troubleshooting Help to
pic.
After a bit of troubleshooting I discovered that the problem was that the authentication packets was to big (over 16k), this will cause WinRM to reject the request. The reason for authentication packets getting too big can be because the user is member of very
many security groups or in my case because of the SidHistory attribute.
The solution was to increase the MaxFieldLength and MaxRequestBytes keys in the registry under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HTTP\Parameters
If the keys does not exists you can create them, be sure to use the DWORD type.
I sat MaxFieldLength to DEC value 40000 and MaxRequestBytes to DEC value 32768 and rebooted the server. Problem solved.

Received HTTP response code 500 : Internal Server Error using connection Fi

Hi everybody,
I have configured a file-webservice-file without BPM scenario...as explained by Bhavesh in the following thread:
File - RFC - File without a BPM - Possible from SP 19.
I have used a soap adapter (for webservice) instead of rfc .My input file sends the date as request message and gets the sales order details from the webservice and then creates a file at my sender side.
I monitored the channels in the Runtime work bench and the error is in the sender ftp channel.The other 2 channel status is "not used" in RWB.
1 sender ftp channel
1 receiver soap channel
1 receiver ftp channel.
2009-12-16 15:02:00 Information Send binary file "b.xml" from ftp server "10.58.201.122:/", size 194 bytes with QoS EO
2009-12-16 15:02:00 Information MP: entering1
2009-12-16 15:02:00 Information MP: processing local module localejbs/AF_Modules/RequestResponseBean
2009-12-16 15:02:00 Information RRB: entering RequestResponseBean
2009-12-16 15:02:00 Information RRB: suspending the transaction
2009-12-16 15:02:00 Information RRB: passing through ...
2009-12-16 15:02:00 Information RRB: leaving RequestResponseBean
2009-12-16 15:02:00 Information MP: processing local module localejbs/CallSapAdapter
2009-12-16 15:02:00 Information The application tries to send an XI message synchronously using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:02:00 Information Trying to put the message into the call queue.
2009-12-16 15:02:00 Information Message successfully put into the queue.
2009-12-16 15:02:00 Information The message was successfully retrieved from the call queue.
2009-12-16 15:02:00 Information The message status was set to DLNG.
2009-12-16 15:02:02 Error The message was successfully transmitted to endpoint com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Internal Server Error using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:02:02 Error The message status was set to FAIL.
Please help.
thanks a lot
Ramya

Hi Suraj,
You are right.The webservice is not invoked.I see the same error in the sender channel and the receiver soap channel status is "never used".
2009-12-16 15:52:25 Information Send binary file "b.xml" from ftp server "10.58.201.122:/", size 194 bytes with QoS BE
2009-12-16 15:52:25 Information MP: entering1
2009-12-16 15:52:25 Information MP: processing local module localejbs/CallSapAdapter
2009-12-16 15:52:25 Information The application tries to send an XI message synchronously using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:52:25 Information Trying to put the message into the call queue.
2009-12-16 15:52:25 Information Message successfully put into the queue.
2009-12-16 15:52:25 Information The message was successfully retrieved from the call queue.
2009-12-16 15:52:25 Information The message status was set to DLNG.
2009-12-16 15:52:27 Error The message was successfully transmitted to endpoint com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Internal Server Error using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:52:27 Error The message status was set to FAIL.
what can I do about this?
thanks,
Ramya

How to get specific accounts using ScriptedHostResourceAdapter

Hi
we are using ScriptedHostResourceAdapter for mainframe.
But how to get some specific list of users.
When i try to get the connetion using
<invoke name='getAffinityConnection' class='com.waveset.adapter.HostConnPool'>
Iam getting error. Though LoginAction is there in idm and working with users and reconciliations.
com.waveset.exception.ItemNotFound: ResourceAction: LoginAction
When i try to use listAllObjects still iam getting the same error.
com.waveset.exception.ItemNotFound: ResourceAction: LoginAction
<invoke name='listAllObjects'>
               <new class='com.waveset.adapter.ScriptedHostResourceAdapter'>
               <rule name='commonRuleLib:RUL_getWSObject'>
<argument name='Id' value='Mainframe'/>
<argument name='type' value='Resource'/>
<argument name='context'>
<invoke name='getAuthenticatedContext'>
                         <new class='com.waveset.server.InternalSession'/>
                         <s>configurator</s>
                    </invoke>
</argument>
</rule>
                    <new class='com.waveset.object.ObjectCache'/>
               </new>
               <s>Account</s>
               <map>
               <s>accountId</s>
                    <s>G1NXV6T</s>
               </map>
               <s>configurator</s>
                    <invoke name='getPassword'>
                         <invoke name='getObject' class='com.waveset.ui.FormUtil'>
                         <invoke name='getAuthenticatedContext'>
                              <new class='com.waveset.server.InternalSession'/>
                              <s>configurator</s>
                         </invoke>
                         <s>User</s>
                         <s>configurator</s>
                         </invoke>
                    </invoke>
          </invoke>
Please help if any solution is there
Thanks
Edited by: shailu541 on Feb 3, 2010 10:50 AM
Edited by: shailu541 on Feb 3, 2010 10:52 AM

I think i got it now. iam not passing objectcache
<invoke name='getCache'>
                         <new class='com.waveset.server.InternalSession'/>
               </invoke>

Unable to start Admin server by using weblogic.admin utility

Hi,
I stoped the admin server by using weblogic.admin utility command as bellow.
java weblogic.Admin -url http://server1:8008 -username adminuser -password weblogic SHUTDOWN myserver
It stopped successfully. But while starting as below i am getting error. Kindly help me out.
java weblogic.Admin -url http://172.27.72.70:8008 -username adminuser -password weblogic START myserver
<Warning> <Net> <BEA-000905> <Could not open connection with host: server1 and port: 8008.>
Failed to connect to http://172.27.72.70:8008: Destination unreachable; nested exception is:
java.net.ConnectException: Tried all: '1' addresses, but could not connect over HTTP to server: 'star', port: '8008'; No available router to destination
Any suggestion is appreciated.
Thanks,

Hi,
Thanks for your reply.
Yes, Node Manager has configured on Managed Server's host machine.
So can't we start admin server by using weblogic.admin utility if admin server is stopped?
Thanks,

I keep getting " server did not reply " when sending picture in email from iPhoto ?

MAC/ Yosemite / Iphoto : I keep getting " server did not reply " when trying to send picture using the email function in iPhoto ?

in the iPhoto preferences ==> accounts delete your e-mail account and reenter it
OR
IMHO the better solution is to set Apple mail as the email client in the iPhoto preferences
LN

When adding a yahoo email account I keep getting "Server Unavailable" notification. This started after I updated my software. I deleted my accounts and tried to re-add them but continue to get this notification??

When adding a yahoo email account I keep getting "Server Unavailable" notification. This started after I updated my software. I deleted my accounts and tried to re-add them but continue to get this notification??

hello, this is a scam tactic that is trying to trick you into installing malware, so don't download or execute this kind of stuff! as you've rightly mentioned, you're already using the latest version of firefox installed and you can always initiate a check for ''updates in firefox > help > about firefox''.
you might also want to run a full scan of your system with the security software already in place and different tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes], [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] & [http://www.kaspersky.com/security-scan kaspersky security scan] in order to make sure that there isn't already some sort of malware active on your system that triggers these false alerts.
[[Troubleshoot Firefox issues caused by malware]]

Get server ID using TM_MIB

Similar Messages

Maybe you are looking for