How to use NAS for copying data on?

Well, this may sound like a simple question, but apparently it's not as simple as it seems.
I have a Raidon SL3620 NAS. I managed to set it up with help of one of our community members.
However, now I found the problem of not being able to copy all my data on there. I want to copy my movies etc to the NAS, so I created a user (myself) and a group (called public), with no shared space limits. I granted access to all to make things easy, and after the harddrives were formatted, I drag-dropped the relevant folders into the new user directory on the NAS.
First of all, it predicted some 100 hours to complete the task (and my iMac only has a 1TB harddrive), whilst my Mac and the NAS are both connected via ethernet. I find that unlikely.
Then when I woke up this morning, it had aborted the transfer due to lack of space. It has 2x 2TB storage in RAID 1, and as I said, my iMac has a 1TB HD. So why does it say it's full after 900MB??
Also, when I then decided to remove the data, I was told some files were in use. Which surprised me because the copy was cancelled. I checked airport utility and no one was using it, so I wonder what's happening there!
Can anyone help me out?

right, I think this was caused by using a wireless connection, which takes longer than smoke signals. Using ethernet seems to have solved the issue for now

Similar Messages

  • How to use exception for a Date Key Figure

    Hello All,
                    I have the following requirement.
    1. I have a Key Figure which is Date Type.
    2. I need to color the cell to green if the it is filled with date otherwise leave it as it is.
    Please suggest how to overcome it.
    Thanks & Regards,
    Rajib

    hi,
    Your requirement is not clear, you have the below setup
    I have the following requirement.
    1. I have a Key Figure which is Date Type.
    How can a KF be of date type, or is it the value of a date characteristic that you have extracted in KF using formula variable. If yes you just need to define exception for the value greater than 0.
    regards,
    Arvind.

  • How to use sqlldr for loading data in Oracle 10g xe.

    I want to load data using SQL*LOADER in Oracle DB from a .csv file but it doesn't seems to be working can anyony please help me.I am not get getting how to use sqlldr.
    in CMD in giving this command
    sqlldr hr/hr control='c:/data/record.ctr'
    record.ctr>>load data
    infile 'c:\data\record.csv'
              into table record
    fields terminated by "," optionally enclosed by '"'          
    ( Name,uday, hemant )
    sql table in data base>>CREATE TABLE "RECORD"
    (     "NAME" VARCHAR2(50),
         "UDAY" VARCHAR2(50),
         "HEMANT" VARCHAR2(50)
    record.csv>>name,uday,hemant
    c1,45454,84894
    c2,489654,21322
    can you please tell me how can i get this simple example run.

    C:\>sqlldr scott/tiger
    control = data.ctl
    SQL*Loader: Release 10.1.0.2.0 - Production on Thu Sep 14 17:06:46 2006
    Copyright (c) 1982, 2004, Oracle.  All rights reserved.
    Commit point reached - logical record count 3
    SQL> conn scott/tiger
    Connected.
    SQL> create table data (col1 varchar2(40),col2 varchar2(40),col3 varchar2(40));
    Table created.
    SQL> select * from data;
    COL1                 COL2                 COL3
    name                 uday                 hemant
    c1                   45454                84894
    c2                   489654               21322
    SQL>
    data.csv
    name,uday,hemant
    c1,45454,84894
    c2,489654,21322data.ctl
    load data
    infile 'c:\data.csv'
    append
    into table data
    fields terminated by ','
    optionally enclosed by '"'
    (col1,col2,col3)i hope it will solve ur problem

  • Flex 3  :How to use trace for printing data in console

    Hi ,
    I heard that we can use trace to print data on to Flex Builder 3 console . But when i tries it was of no luck .
    The below is a simple program , in which i was out of luck .
    public function callMe():void
                trace("AAA");
    <mx:Button id="Register" name="Register" label="Register" height="23" click="callMe()"/>
    Here in the above porogram , after clicking the Button , i cant see 'AAA 'related  inside my Flex Builder .
    Any help ??
    Thank you .

    Hi Kiran
                Make a break point at trace line and debug the application  There u can find the message u typed in console..  trace works only under debugging mode... not in development mode ..
               Have a nice day
    Thanks
    Ram

  • How to use "bapi_salesdocu_createfromdata1" for asign date to delivery.

    I am using the Bapi BAPI_SALESDOCU_CREATEFROMDATA1  to create an order and their delivery, the date of the order they are believed correctly according to the data that are sent, but the date of the delivery this creating with the date of the system. that I should make so that the date of the delivery is similar to that of the order. 
    Regards

    tks. Krish G
    not used this item because the REQ_DATE not exist in the structure .
    in the structure only exist the next item : BILL_DATE, PURCH_DATE, PO_DAT_S, BILL_SCHED, INVO_SCHED, FIX_VAL_DY, PRICE_DATE, SERV_DATE, FIX_DATE_QTY
    tks.

  • What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?

    Hi All,
    I am new to TestStand. Still in the process of learning it.
    What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?
    Thanks in advance,
    LaVIEWan
    Solved!
    Go to Solution.

    Hi,
    Using the Parameters is the correct method to pass data into and out of a sub sequence. You assign your data to be passed into or out of a Sequence when you are in the Edit Sequence Call dialog and in the Sequence Parameter list.
    Regards
    Ray Farmer

  • How to use i for if condition in a for i in loop?

    Hi friends,
    I have a question on how to use i for IF condition in a loop, in order to get an efficient programming and results. Here is outlined SQL:
    cursor is
    select c1,c2,c3 from table1; -- 100 rows returned.
    open cursor
    loop
    fetch c1,c2,c3 into v1,v2,v3;
    for i in 1..3 loop
    if 'v'||i between 90 and 100 then
    v_grade := 'Excellent';
    elsif 'v'||i between 80 and 89 then
    elsif 'v'||i between 50 and 59 then
    end if;
    end loop;
    close cursor;
    This way, I don't need to use a lot of if..then for hard code v1,v2,v3,.... actually I have more v..
    But Oracle gave an error of this usage of 'if 'v'||i' or 'v'||to_char(i).
    Thanks for any advice in advance!

    user508774 wrote:
    Thanks for comments and advices. But I didn't get your inputs clearly. Are you saying I don't need to use PL/SQL to achieve this?Correct. Ronel and John showed you the basic approaches. SQL is not a mere I/O language for making read and write calls. It is a very capable, flexible and powerful language. One can solve a problem with a few lines of SQL code, that will take 100's of lines of PL/SQL or Java code.
    So do not underestimate what can be done in SQL.
    v_cmd := 'UPDATE parts_categ_counts SET w1='||v1||', w2='||v2||...||v9||' WHERE seq='||vseq||';
    EXECUTE IMMEDIATE v_cmd;This code is also wrong. Besides the fact that there is no need for dynamic SQL, this approach creates a brand new SQL statement each loop iteration.
    SQL is source code. It needs to be parsed (compiled). The end result is an executable program that is called a cursor. This cursor needs to be stored in server memory (the SQL Shared Pool in the SGA).
    The problem with your code is that it is slow and expensive - it generates lots of unique SQL statements that need CPU for parsing and server memory for storage.
    These add up to a very significant performance overhead. That is the wrong approach. The correct approach is the same one that you would use in any other programming language.
    Let's say you need to use Java to process a bunch of CSV files - exact same CSV layout used by each file. A file needs to be read, processed, and a log file created.
    Will you write a Java program that loops through the files, for each file found, write a Java program for processing that file, compile it, then execute it?
    Or would you write a Java program that takes the name of the file as input, and then process that file and writes the log file?
    The 2nd approach provides a program that can process any of those CSV files - one simply needs to pass the filename as an input parameter.
    Your code and approach use the 1st method. Not the 2nd. And that is why it is wrong.
    To create a SQL program with parameters is done by using bind variables. Instead of
    v_cmd := 'UPDATE parts_categ_counts SET w1='||v1||', w2='||v2||...||v9||' WHERE seq='||vseq||';
    The following SQL source code should be created:
    v_cmd := 'UPDATE parts_categ_counts SET w1=:v1, w2=:v2 ..., w9=:v9 WHERE seq= :vseq';
    The tokens with the colon prefix (such as :v1), are bind variables. Think of these as the parameters to the SQL cursor.
    The server parses this SQL into a cursor. You can now execute the same cursor over and over again, using different bind variables. (just like the 2nd approach above that one would use in Java)
    In PL/SQL, this is made even easier as you can code native SQL code with PL/SQL code and use PL/SQL variables in it. The PL/SQL compiler is clever enough to do the SQL parsing, variable binding, and cursor execution for you. So in PL/SQL, you would use:
    UPDATE parts_categ_counts SET w1=v1, w2=v2 ..., w9=v9 WHERE seq= vseq;
    Where v1 and the others are PL/SQL variables.
    That all said - PL/SQL is only used for data crunching, when the processing of data is too complex for the SQL language to deal with. And this is very seldom the case.
    The main reason for using PL/SQL it to provide processing flow control, conditional processing and error handling, for SQL code. As the SQL language does not have these features.

  • Install Sun ONE Directory Server 5,2 & how to use it for authenticate user

    Good afternoon, Excuse, are newbie in the scope I am learning and putting desire to him, this in my situation I am trying to install Sun ONE Directory Server 5,2 since I understand that this it is application LDAP for Solaris, ok I want to install it to authenticate user against the system, that is to say, to be able to acces the server entering with a created user from the data base of LDAP and make think user that his created in the system. But the documentation that I finds indicates the installation of Sun ONE Directory Server 5,2 but it not clearly about how to use it for authentication. Some one have any manual step by step of Sun ONE Directory Server 5,2 installation and how to make it for authentication systems users.
    I read the forum seeking for anwser and i get confuse
    Thanks for the help and sorry for any inconvenient
    Message was edited by:
    Aku_28
    Message was edited by:
    Aku_28

    I think that I found the Sun endorsed book locations for using LDAP accounts that don't use authentication besides "crypt". I now can use an account with a "ssha" password. It can be more than 8 characters long.
    Chapter 14 System Administration Guide: Naming and Directory Services
    Read page 201 which is the pam.conf file pam_ldap setups. I edited my "/etc/pam.conf" file to reflect this
    Chapter 7 Directory Server 5.2 2005Q4 - Administration Guide
    Read page 316-318 which has a graphical technique to specify password syntax. I set it up and then tried the password by running "su - brahms". It now requires a longer password than 8 characters and it is set up to use "ssha" for that UID entry "brahms".

  • How to use parathesis for OR and AND OPERATOR...

    oracle 10g
    Hi
    Guys please help how to use parathesis for this below query its giving same output values for all my similar queries
    select count(balance) from balanace_tb
    where kk_code in(111,112,113)
    or
    kk_code in(111,1124,115,116) and sec_id in(50,51,52,53)
    or
    kk_code in(100,164,215,161) and sec_id in(53,51,52,59)
    or
    kk_code not in(100,164,215,162,134) and sec_id in(53,51,52,59)
    or
    kk_code in(100,164,215,16) and sec_id in(53,51,52,59)
    and
    open_date=20130331

    I assume you're looking for something like this?
    select count(balance) from balanace_tb
    where (   kk_code in(111,112,113)
           or (kk_code in(111,1124,115,116) and sec_id in(50,51,52,53))
           or (kk_code in(100,164,215,161) and sec_id in(53,51,52,59))
           or (kk_code not in(100,164,215,162,134) and sec_id in(53,51,52,59))
           or (kk_code in(100,164,215,16) and sec_id in(53,51,52,59))
    and open_date=20130331
    If not, please post some example data, the expected output from that data, and the logic you are expecting to use, as well as posting your database version.
    Re: 2. How do I ask a question on the forums?

  • How to Use BAPI_OUTB_DELIVERY_CHANGE for Batch Split

    Hi Experts, I have the follow delivery:
    Item        Material   Deliv.Qty    Un
    10     739911     2     PQT
    And I want to obtain this:
    Item        Material   Deliv.Qty    Un                            Batch
    10     739911     0     PQT
    900001     739911     1     PQT          ZZ00060
    900002     739911     1     PQT          ZZ00061
    But, after using the Bapi I obtained this:
    Item        Material   Deliv.Qty    Un                            Batch
    10     739911     1,372     PQT
    900001     739911     0,314     PQT          ZZ00060
    900002     739911     0,314     PQT          ZZ00061
    So as you can see the problem is with the "Deliv.Qty". I expected:
    Item        Deliv.Qty
    10            0
    900001     1     
    900002     1     
    But I obtained:
    Item        Deliv.Qty
    10     1,372
    900001     0,314
    900002     0,314
    The parameters that I am using in the Bapi are:
    HEADER_DATA                                   
    DELIV_NUMB = 801174646
    HEADER_CONTROL                                
    DELIV_NUMB = 801174646
    DELIVERY = 801174646
    TECHN_CONTROL
    UPD_IND = U
    ITEM_DATA (three records):   
    DELIV_NUMB = 801174646
    DELIV_ITEM = 000010  
    MATERIAL = 739911  
    FACT_UNIT_NOM = 1   
    FACT_UNIT_DENOM = 1   
    DELIV_NUMB = 801174646  
    DELIV_ITEM = 900001     
    MATERIAL = 739911     
    BATCH = ZZ00060    
    HIERARITEM = 000010     
    USEHIERITM = 1          
    DLV_QTY = 1
    DLV_QTY_IMUNIT = 1
    FACT_UNIT_NOM = 1      
    FACT_UNIT_DENOM = 1      
    DELIV_NUMB = 801174646  
    DELIV_ITEM = 900002     
    MATERIAL = 739911     
    BATCH = ZZ00061    
    HIERARITEM = 000010     
    USEHIERITM = 1          
    DLV_QTY = 1
    DLV_QTY_IMUNIT = 1
    FACT_UNIT_NOM = 1      
    FACT_UNIT_DENOM = 1
    ITEM_CONTROL (three records):
    DELIV_NUMB = 801174646
    DELIV_ITEM = 000010  
    CHG_DELQTY = X
    DELIV_NUMB = 801174646
    DELIV_ITEM = 900001  
    CHG_DELQTY = X
    DELIV_NUMB = 801174646
    DELIV_ITEM = 900002  
    CHG_DELQTY = X
    So I am missing something but I don't know what.
    Can any one help me with this please?
    PD: I have looked the following forums in order to use the Bapi:
    How to Use BAPI_OUTB_DELIVERY_CHANGE for Batch Split
    batch split using BAPI_OUTB_DELIVERY_CHANGE
    Re: Help in BAPI_OUTB_DELIVERY_CHANGE(batch-split)
    BAPI_OUTB_DELIVERY_CHANGE - Batch Splits don't work
    Help for BAPI_OUTB_DELIVERY_CHANGE

    Hey,
    My code is for the inbound delivery but it should work the same.
    Give this a try.
    REPORT  z_delivery_batch_split.
    DATA:header_data  LIKE  bapiibdlvhdrchg,
    header_control  LIKE  bapiibdlvhdrctrlchg,
    delivery  LIKE  bapiibdlvhdrchg-deliv_numb,
    ls_return LIKE bapiret2,
    item_data  TYPE TABLE OF  bapiibdlvitemchg,
    item_control  TYPE TABLE OF bapiibdlvitemctrlchg,
    ls_item_data  LIKE  bapiibdlvitemchg,
    ls_item_control LIKE  bapiibdlvitemctrlchg,
    return TYPE TABLE OF bapiret2 WITH NON-UNIQUE KEY type.
    header_data-deliv_numb = '1800005005'.
    header_control-deliv_numb = '1800005005'.
    delivery = '1800005005'.
    ls_item_data-deliv_numb = '1800005005'.
    ls_item_data-deliv_item = '900001'.
    ls_item_data-material = '000000000020067722'.
    PERFORM create_batch CHANGING ls_item_data-batch.
    ls_item_data-hieraritem = '000010'.
    ls_item_data-usehieritm = '1'.
    ls_item_data-dlv_qty = 80.
    ls_item_data-dlv_qty_imunit = 80.
    ls_item_data-fact_unit_nom = '1'.
    ls_item_data-fact_unit_denom = '1'.
    ls_item_data-sales_unit = 'EA'.
    ls_item_data-base_uom = 'EA'.
    APPEND ls_item_data TO item_data.
    ls_item_data-deliv_numb = '1800005005'.
    ls_item_data-deliv_item = '900002'.
    ls_item_data-material = '000000000020067722'.
    PERFORM create_batch CHANGING ls_item_data-batch.
    ls_item_data-hieraritem = '000010'.
    ls_item_data-usehieritm = '1'.
    ls_item_data-dlv_qty = 60.
    ls_item_data-dlv_qty_imunit = 60.
    ls_item_data-fact_unit_nom = '1'.
    ls_item_data-fact_unit_denom = '1'.
    ls_item_data-sales_unit = 'EA'.
    ls_item_data-base_uom = 'EA'.
    APPEND ls_item_data TO item_data.
    ls_item_control-deliv_numb = '1800005005'.
    ls_item_control-deliv_item = '900001'.
    ls_item_control-chg_delqty = 'X'.
    APPEND ls_item_control TO item_control.
    ls_item_control-deliv_numb = '1800005005'.
    ls_item_control-deliv_item = '900002'.
    ls_item_control-chg_delqty = 'X'.
    APPEND ls_item_control TO item_control.
    break cgavin.
    CALL FUNCTION 'BAPI_INB_DELIVERY_CHANGE'
       EXPORTING
         header_data          = header_data
         header_control       = header_control
         delivery             = delivery
    *   TECHN_CONTROL        = TECHN_CONTROL
       TABLES
    *   HEADER_PARTNER       = HEADER_PARTNER
    *   HEADER_PARTNER_ADDR  = HEADER_PARTNER_ADDR
    *   HEADER_DEADLINES     = HEADER_DEADLINES
         item_data            = item_data
         item_control         = item_control
    *   ITEM_SERIAL_NO       = ITEM_SERIAL_NO
    *   EXTENSION1           = EXTENSION1
    *   EXTENSION2           = EXTENSION2
         return               = return
    *   TOKENREFERENCE       = TOKENREFERENCE
    *   HANDLING_UNIT_HEADER = HANDLING_UNIT_HEADER
    *   HANDLING_UNIT_ITEM   = HANDLING_UNIT_ITEM
    *   PARTIAL_GR_OBJECTS   =          PARTIAL_GR_OBJECTS
    READ TABLE return
    INTO ls_return
    WITH TABLE KEY type = 'E'.
    IF sy-subrc = 0.
       MESSAGE ID ls_return-id TYPE ls_return-type NUMBER ls_return-number WITH ls_return-message_v1 ls_return-message_v2
       ls_return-message_v3 ls_return-message_v4.
    ENDIF.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        wait          = 'X'.
    break cgavin.
    *&      Form  CREATE_BATCH
    *       text
    *      <--P_LS_ITEM_DATA_BATCH  text
    FORM create_batch  CHANGING p_ls_item_data_batch.
       DATA: ls_bncom TYPE bncom.
       ls_bncom-matnr = ls_item_data-material.
       ls_bncom-werks = 'C333'.
       ls_bncom-lgort = '3000'.
       SELECT SINGLE mtart
         FROM mara
         INTO ls_bncom-mtart
         WHERE matnr = ls_bncom-matnr.
       CALL FUNCTION 'VB_NEXT_BATCH_NUMBER'
         EXPORTING
           matnr                          = ls_bncom-matnr
           werks                          = ls_bncom-werks
           check_batch                    = 'X'
           check_material                 = ''
           message_when_auto              = ' '
           x_bncom                        = ls_bncom
           lock_batch                     = ' '
         IMPORTING
           new_charg                      = p_ls_item_data_batch
         EXCEPTIONS
           no_material                    = 1
           no_plant                       = 2
           material_not_found             = 3
           plant_not_found                = 4
           no_batch_handling              = 5
           batch_exist                    = 6
           no_number                      = 7
           illegal_batch_number           = 8
           interval_not_found             = 9
           object_not_found               = 10
           interval_overflow              = 11
           error_automatic_batch_number   = 12
           cancelled                      = 13
           automatic_batch_num_not_active = 14
           OTHERS                         = 15.
       IF sy-subrc = 0.
         CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
           EXPORTING
             wait = 'X'.
       ENDIF.
    ENDFORM.                    " CREATE_BATCH

  • How to use Reference type of Data Element

    Hi guys, is there anyone could give me a trace how to use reference type of data element.
    More details i'm going to reach is:
    I create 2 tables:
    eq.
    1. table ZFIRST has field X with data element ZFX (Data element i declared).
    2. table ZSECOND has field Y.
    Here at field Y (second table) I'm going to declare a new data element say it ZFY, but in ZFY I'm going to use the data element as i declared before (ZFX). Is it possible if I do it using reference type data element (SE11)?
    I already did this way, but I got error :
    Field Y: Reference ZFX to class w/o interface cannot be used in DB table ZSECOND
    What does it mean?. Did I miss something about using reference data element type?.
    This error occurs when I activate ZSECOND table. However in creating ZFY (reference) to data element ZFX, there is no error occur.
    The point is I need to RE-declared existing data element and ot put existing data element(ZFX) to my current table (ZSECOND).
    Any helpful will be highly appreciated.
    Thanks.
    Edited by: dinivian dondi on Nov 4, 2010 8:30 AM

    Field Y: Reference ZFX to class w/o interface cannot be used in DB table ZSECOND
    What does it mean?. Did I miss something about using reference data element type?.
    Apparently system doesn't allow you to type a transparent table field with deep type. This refers to references and tables types as components. The RDBMS (Relational DB Management System) cannot interpret this componenets correclty and mapp them to TABLEs in DB.
    So I am affraid you won't be able to type table component with reference to other data element.
    The point is I need to RE-declared existing data element and ot put existing data element(ZFX) to my current table (ZSECOND).
    Sorry but I don't get it, could you please explain this more clearly. Maybe then we can think of some workaround for you.
    Regards
    Marcin

  • LSMW used only for master data upload?

    Hi
    Can you please let me know if LSMW is used only for master data upload or we can also use it for transaction data ?

    Hi Christino.
    I have come across a standard SDN thread which deals with the uploading master data, refer it:
    [SDN Reference for uploading master data using LSMW|how can we upload master data by using LSMW;
    [SDN reference for which uploading is preferred (Master data or Transaction data)|Which one is better for uploading data LSMW or ECATT ?;
    Good Luck & Regards.
    HARSH

  • How to attach jkm for a data model?

    please suggest me.....
    i want to use journalizing for a data model so i need to give jkm for that how can i give jkm in the journalizing tab of that particular model

    Hi,
    You need to import the JKM into your project .
    Then goto your model --->journalizing tab and select your JKM imported in the project .
    Thanks,
    Sutirtha

  • How to Use 'uid' for AD Users Without Domain Name For User Log in OAM

    How to Use 'uid' for synchronized Active Directory (AD) Users into Oracle Internet Directory (OID) Without Domain Name For User Logins in OIDDAS and OAM
    We successfully integrated OAM 11g with EBS R12.1.3 Now all the AD user id's stored in fnd_users table as [email protected]
    How can we remove @abc.com
    We are using OID 11g and OAM 11g
    Found the similar note for OID 10G: How to Use 'uid' for AD Users Without Domain Name For User Logins in OIDDAS and SSO [ID 580480.1]
    We are in OID 11g.
    Any help on this greatly appreciated.

    I couldn't find any reference that could be helpful -- Please log a SR and see if this is supported and if the steps are available.
    Thanks,
    Hussein

  • How to use webcam for Yahoo Messenger on MacBook Pro, How to use webcam for Yahoo Messenger on MacBook Pro

    How to use webcam for Yahoo Messenger on MacBook Pro, How to use webcam for Yahoo Messenger on MacBook Pro because it's not working =(

    The cheap & easy way is to just drag the app to the Trash.
    If you want to get all of the associated files use an app deleting app like the free AppCleaner;
    http://www.freemacsoft.net/appcleaner/
    Just drag an app and drop it on the AppCleaner icon in the Dock and it will find and present to you all the files it thinks are associated with the app. You can uncheck any that you want to keep and then let AppCleaner Trash the rest.

Maybe you are looking for

  • SSO from CRM 2007 to ITS of R/3 4.7.

    Hi Experts, We are using CRM 2007 interaction center. We have provided some links to R/3 transaction using transaction launcher. Now we need to implement SSO to the R/3 system. We are using Standalone ITS 6.20 system to connect to R/3 from Interactio

  • How do you share a Guest's file to the owner's files - detailed instructions needed

    Previously I asked how to save a file created by a Guest user into the owner's files.  Matt Clifton answered "Put files in the Users/Shared folder, they will not be deleted when guest signs out."  I can't see how to do that.  I am creating a recordin

  • I can't move a layer in photoshop CS6 Beta for Mac. I just get a red border

    I can't move a layer in photoshop CS6 Beta for Mac. I just get a red border around the canvas. Any Ideas?

  • Is there a fix for ORA-13347 (sharable?)

    Hi, Would anyone be willing to share their PL/SQL fix for: "ORA-13347 Description:the coordinates defining an arc are not distinct" ? I really do not wish to change the tolerances that I have set. The offending arc may be one of many within the lines

  • [solved] mpv & ffmpeg warning

    After a sysupdate [2014-12-05 18:23] [PACMAN] upgraded ffmpeg (1:2.4.4-1 -> 1:2.5-1) [2014-12-05 18:23] [PACMAN] upgraded mpv (0.7.0-2 -> 0.7.1-1) I get Warning: mpv was compiled against a different version of ffmpeg than the shared library it is lin