How to use only one event case at a time??

Using LabVIEW, using the event structure is it possible to have only one event case execute at a time. For example, having event case controlled by keyboard, and the other event case controlled by mouse (clicking buttons) and only one being able to execute, not simultaneously. I was considering using a switch of some sort, but each case does not have a "stop if true/false" so I am open to a new method or work around. I attached code. I do not want output to be able to be sent from the keyboard case and mouse case at the same time.
Thanks,
Andrew
Attachments:
WiFi Motor Control & Cam Stripped.vi ‏29 KB

Ah, OK. all you need is to keep state in a shift register that ensures that all "key down/mouse down" events are discarded after each key down/mounse down event until a key up or mouse up (resp.) has occured.
Overall, you code is still way to complicated for this simple task. For example, you could eliminate all these "select" primitives and place the approriate diagram constant inside the respective case. On the other hand it is too simplistic, because you would think that certain key combinations should be allowed concurrently (e.g. up and left).
What does the receiver actually do with the codes? Do you have any documentation for this device?
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

  • How to open only one web page at a time?

    I used to have it set so when I opened a new web page, the previous one closed. Now, nothing closes automatically and I have about 50 pages open that I have to close. How do I set it so that only one page opens at a time?

    HI Janice,
    You can use a keyboard shortcut to close all windows in Safari. CommandShiftW.
    To close one window, Command + W.
    Carolyn

  • How to make only one JFrame active at a time !!!

    Hy, I have created a JFrame and I have placed a
    JPanel in it. I also have a JButton "New" on the
    JPanel. When I click on the "New" Button, another JFrame
    appears. But I want ONLY one JFrame to be appeared
    at a time. That is when a JFrame appears on the JPanel,
    I should not be able to add another one.
    If it is not possible to do this with JFrame, then how to do
    it with a JDialog
    How to do this.
    thanks

    You can declare a boolean variable in your class and set it to true if you open a window. Next time when you click the NEW button, check whether that boolean value is true or false. If true then don't open a new window. Also when u close the frame window, set the boolean value to false.

  • How to use only one core for Macbook Pro?

    I know that Macbook Pro is a dual-core CPU Macbook. I know I can do this by using battery only. But are there any ways that I can turn off one core in the system while keep the power adapter plugged in? Thank you!

    Navigate to /Library/Application Support/HWPrefs and launch the CPUPalette program.
    (If you don’t find it there, insert your Leopard install disc, click on Optional Installs, select Packages, and double-click on CHUD.pkg; that will install CPUPalette.)
    It will display two graphs showing how busy your CPU’s cores are, and let you disable one or more of them. Click on the oblong button in the upper right corner to reveal a settings panel where you can adjust transparency, sample interval and history, and chart format.

  • Html Widget Crashes. How to load only one html widget at a time?

    I have a bunch of html widgets which are just tab navigators with html pages inside of them. I must have about 20 of them , mostly leading to google image searches for common searches I tend to do in my work. Instead of constantly searching for these things on google I just click on the tab with the google search for say..."tree images".  Its very fast and effecient for me.
    The problem is now I have so many that it crashes photoshop, or crashes adobe configurator most of the time if I try to open the panel file. Im guessing that the panel I made tries to load all 20 google image searches at once, instead of only loading the page I click on one at a time. Is there anyway to stop configurator from loading my html widgets that arent clicked on ?

    Anyone?

  • How to Show only One Credit Column at a time

    Hi,
            This is the Query :- it displays  all the credit columns simultaneously
    SELECT OINV.DocDate AS 'Posting date',
                          OCRD.GroupNum AS 'Payment Terms', OCRD.Balance AS 'Amount', OINV.DocTotal AS ' Debit Amount',
                          CASE WHEN OCRD.GroupNum = 7 THEN (OINV.DocTotal - OCRD.BALANCE) ELSE 0 END AS 'Credit 7',
                          CASE WHEN OCRD.GroupNum = 9 THEN (OINV.DocTotal - OCRD.BALANCE) ELSE 0 END AS 'Credi 9',
                          CASE WHEN OCRD.GroupNum = 5 THEN (OINV.DocTotal - OCRD.BALANCE) ELSE 0 END AS 'Credi 5',
    OINV.DocDueDate AS 'Due date ',OINV.Address
    FROM         OCRD INNER JOIN
                          OINV ON OINV.CardCode = OCRD.CardCode
    WHERE (OINV.DocDate  BETWEEN '04/08/11' AND '06/09/11'  AND OINV.CardCode = 'C00356')
    - it displays  all the credit columns simultaneously
    i want if GroupNum =7 then ,it should display the data in Credit 7 Column and rest Credit 5 and Credit 9 should be hide (Credit 5 and Credit 9 columns should not be shown in the data)
    Similarly, if GroupNum =5 then, it should display the data is Credit 5 Column and rest Credit 7 and Credit 9 should be hide
    similarly for GroupNum =9.
    Kindly give me the solution for this problem.
    Regards
    Rahul

    Hi Rahul.....
    Try this.....
    SELECT OINV.DocDate AS 'Posting date',
    OCRD.GroupNum AS 'Payment Terms', OCRD.Balance AS 'Amount', OINV.DocTotal AS ' Debit Amount',
    (Case When OCRD.GroupNum=7 Then (OINV.DocTotal - OCRD.BALANCE)
    Else
    Case When OCRD.GroupNum=9 Then (OINV.DocTotal - OCRD.BALANCE)
    Else
    Case When OCRD.GroupNum=5 Then (OINV.DocTotal - OCRD.BALANCE)
    Else 0
    End End End) As 'Credit',
    OINV.DocDueDate AS 'Due date ',OINV.Address
    FROM OCRD INNER JOIN
    OINV ON OINV.CardCode = OCRD.CardCode
    WHERE (OINV.DocDate BETWEEN '04/08/11' AND '06/09/11' AND OINV.CardCode = 'C00356')
    Regards,
    Rahul

  • Delete only one text message at a time w/o deleting entire conversation?

    Does anyone know how to delete only one text message at a time without having to delete the entire conversation? The only two options I get are "clear conversation" or "cancel."
    HP   Windows XP  

    That's the same option I get too. It seems to me I recall seeing somewhere that you could delete individual messages in a thread but I don't remember where.
    It seems silly to limit deletions to only the entire conversation since with most phones you can delete individual messages.

  • HT204053 i RECENTLY PURCHASED ANOTHER IPHONE.  MY INTERNET IS NOT WORKING.  I JUST CREATED AN APPLE ID.  WHAT'S NEXT?  I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES.  HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

    I RECENTLY PURCHASED ANOTHER IPHONE.  MY INTERNET IS NOT WORKING.  I JUST CREATED AN APPLE ID.  WHAT'S NEXT?  I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES.  HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

    Welcome to the Apple community.
    iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
    For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

  • How can I use the same event case for different controls dynamically

    OS: Linux 2.6.24-1-686 #1 SMP Sat Apr 19 00:37:55 UTC 2008 i686 GNU/Linux
    LabVIEW: Version 8.2
    I have a lot of (about 50) controls (numeric, boolean) on my front panel. If a "Value Change" event will be fired by any of them the same event case shall be executed. As I do not want to add all 50 controls to the same event case manually I am looking for a way to do it at run time. Additionally the VI is still under contruction, i.e. controls will be added and removed.
    Thanks for any help here.
    Regards,
    Johannes
    Solved!
    Go to Solution.

    Hi Johannes,
    collect all your control references (you can use the FP property for it) and create a user event. Connect this user event to your event structure. Now you have one event case for all your controls. See the attached picture.
    Mike
    Attachments:
    Unbenannt1.PNG ‏11 KB

  • How do you use only one plugin in Logic for multiple guitar tracks? I want to only use one instance of Pod Farm and run all my guitar tracks through that one instance.

    I want to be able to use only one instance of Pod Farm for my guitars, and have all of my guitar tracks run through it while I'm recording.

    What he said. Or here is a similar approach with a picture.
    1. Press the SEND button on every stereo (or mono) guitar track you want to send through the effect. Then select a free bus.
    2. Make sure you turn up the amount of send (in db). Holding alt while leftclicking on this circle sets the send level to 0 db wich is good.
    3. Open the mixer (Cmd+2). Please see that I here have turned the output off from the stereo guitar track. That way the only output will be the BUS, in your case the AmpTrack bus where all your guitars will pass through. If you want both the original guitar sound AND the Ampfarm effect then just set all outputs on your guitar tracks to Stereo Out, like the AmpF Bus track is set in my picture.
    4. Insert your AmpFarm plugin here. I don´t have that plug so I inserted Waves Renes Axe for demo purpose.
    Adjust the volume/effect of every guitartrack by turning the circle input shown as 2. in my picture.
    I now see that you mentioned Pod Farm, not AmpFarm. But I guess it´s the same trick.
    Have fun.
    Heyclown.
    Message was edited by: WizardSongs - Typhoos

  • How do i confirm whether it is using only one partition.

    I want to select the data from one partition only.
    How do i confirm my select query using only one partition.
    To front end developers how do i suugest to use correct partition.
    I know in the select query we can write partion name also if i know the partition.
    But i don't the correct partition name as a front end developer.

    Hello,
    You can find partitions for the table from following view user_tab_partitions. You can use PARTITION Clause but it defeats the purpose of having partition key column,
    You should be able to do this
    select * from my_part_table where part_key='key';Regards

  • How to query on a single row form using only one page

    Hi APEX experts, I am just a beginner in apex and I face several problems on development. Despite that the forum helps me a lot and your answers to other people are valuable , I have stacked into something. Could you please someone tell me : if there is a way to define a single row form page based on table in which I could query and update without using a tabular page (to call the single row form). I want only to use only one page. Does APEX has this functionality? Thank you very much?

    I haven't tried it, but I am going to guess that yes it's possible (or if I were going to do this, this is what I'd try and I suspect it will work).
    If you take a moment and step back and look at what the wizard does when building a "form on a table with report", all it does is build two pages with page 1 (report overview with drill-down Edit button or link usually) calling page 2 (form) and setting the PK field on the page 2 form with an automated row fetch process and built-in DML processes. It's not that hard.
    Page 2 really doesn't care what the calling page was in order to query a single row; it just cares that ANY caller sets the primary key value for the ARF process to fetch a row. So I would just make page 2 call itself. This is what I'd do (and you might have to fine-tune little things that I might not have forseen but I think this will work).
    For the sake of example, let's say our table is PARTS and in it is a PART_ID, PART_NUMBER, PART_DESCRIPTION, PART_COST, etc. Assume PART_ID is the primary key and sequentially assigned by the DB in a trigger and is functionally meaningless to the user and is for PK purposes only. Let's assume PART_NUMBER is a unique key (although not the PK) by which the user will "know" a unique row (since the PK of PART_ID is more internal and not meaningful to the user). Assume PART_DESCRIPTION, PART_COST, etc. are just attributes.
    1. Use the wizard and build a "form on a table with report". This is just to get the handy dandy ARF process and DML processes, validations, etc. all generated for you. Let's assume the report page is Page 1 and the form is Page 2.
    2. When done, delete the report page entirely (so delete page 1).
    3. Edit the form page (page 2) and change any branch references from the nonexistent page 1 to now be page 2.
    Now here's the part where something has to set the internal P2_PART_ID field when page 2 is run. So why not set it from itself from something the user will uniquely enter?
    4. Create a P2_PART_NUMBER_FETCH item (text item is fine or if you want a LOV or whatever that's good too....whatever works. For clarity, you might even want to create a separate "search" or "query" region separate and above your existing form region to set this field apart visually so users know it's a search field. Source for this field should be "only when current value in session state is null".
    5. Created some sort of "GO" button to go along with the P2_PART_NUMBER_FETCH field.
    6. Make sure none of your existing post-submit processes fire when GO is pressed (edit all of the computations and validations and processes and ensure that they have conditions such that they do not fire when the submit value is "GO", so like a PL/SQL expression and set to v('REQUEST')<> 'GO').
    7. Add a new validation to your page that only fires when GO is pressed. Have it validate only when GO is pressed. Have it validate that P2_PART_NUMBER_FETCH is not null.
    8. Add a new PL/SQL process to your post-submit processing that only fires when GO is pressed. Have it look up to the database based on P2_PART_NUMBER_FETCH and get the PART_ID that corresponds to the part number the user entered and set the part number, something like this (even better for style and reusability if you embed this in a DB package function and call it):
    SELECT part_id
    INTO :P2_PART_ID
    FROM PARTS
    WHERE PART_NUMBER = :P2_PART_NUMBER_FETCH;
    9. Not sure if the branches that were generated will suffice for this (might need to add a new one...review what you have and see) but the bottom line is that the page should branch to itself (page 2) and not clear the cache.
    10. When the page repaints, since :P2_PART_ID is now populated in session state (again, page 2 should not care how it got populated...only should care that it did get populated by anything (including itself)), the automated row fetch (ARF) should fire and query up the row from the database for editing.

  • TS3988 It seams that i have another Apple ID, how can i use only one for everything?

    It seams that i have another Apple ID, how can i use only one for everything?

    http://support.apple.com/kb/HT5622?viewlocale=en_US
    -The specific point:
    Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
    If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.

  • I have used only one laptop since I started using apple products, but itunes notified me that i have authorised 5 computers. how do i correct this

    I have used only one laptop since I started using apple products, but itunes notified me that i have authorised 5 computers. how do i correct this

    Deauthorize all, then authorize the active computer.

  • HT204088 How how can I synch my ipod + iphone music to my new computer? I get the same error  "my ipod or iphone is synched with another itunes library.An Ipod can be synched with only one itunes library at a time. What would I like to do Erase and Synch

    How can I synch my ipod & iphone music (purchased from itunes on my old laptop) to my new laptop? I keep getting the same message on my itunes on my new laptop: " The ipod/Iphone is synched with another itunes library. An ipod/iphone can be synched with only one itunes library at a time. What would you like to do - Erase and Synch or Transfer Purchases?" What do I do?
    A couple of other items:
    1) I am guessing Apple does not keep a history of all my music purchases? As I did not have my entire library backed-up anywhere, and relying on the music I have on my ipod and my iphone as my only source of itunes music....I have lost over 500 songs!!!
    2) I used to have an Apple account under another account name, and since have switched to a new account name. Is there anyway to find the history of purchases from my old Apple account name and transfer these over to my new account name and onto my new laptop?
    I hope someone can help, I am having a very difficult time trying to obtain answers. Angie

    The iphone/ipod is NOT a storage/backup device.  Not maintaining a backup copy is a big mistake.
    You can transfer itunes purchases from your iphone/ipod to your computer:
    Authorize your computer for all accounts and then click  File>Transfer Purchases

Maybe you are looking for